Creative Soundblaster X-Fi Software MB

&C I upgraded to Windows 7. I?already had the Soundblaster?X-Fi software installed. It would not work with Windows 7. I installed it using the Vista compatability mode with the?CD. Now when i try?to open the Creative Console Launcher, only a?small blue screen appears. I also can't open the Volume Panel. The other features seem to work. I have reinstalled several times, with the same results. Any suggestions on how to fix this. Thanks. ?

Was it the xp instalation cd or the vista one? I dont think the xp software would work but the vista software should. You can update most of the stuff by downloading it online from the support section or you can try the daniel k support pack. I'd uninstall the software first.

Similar Messages

Creative SoundBlaster Audigy Advanced MB software activation probl

Hello!?I bought?a software named Creative SoundBlaster Audigy Advanced MB, when I ordered my notebook Inspiron 720 from DELL, on the 8th? of September, 2007. They provided a CD for the software, which I installed, and it worked. But then later that day (when I recieved the laptop), I formatted the hard-disk for the following reasons - ) It only had 2 partitions for the entire dri've, one of which was a recovery partition, and I wanted to create more.2) I wanted to remove MediaDirect.3) I wanted to remove bloatware that DELL gave me with it, ie, DELL Quickset, DELL Support, DELL this, DELL that, Norton AntiVirus etc.4) I wanted Vista installed by my way. After I had done everything I wanted, I started to re-install the Creative software, the same way like I did before. But this time, when it took me to the transaction page and asked me for the reason of re-installing this software, it said "The CD Key has expired."?I have tried 2 different browsers,?I have cleared my cache, I have penta-checked my CD-Key before each install and have done anything a Computer Software engineer (me) would do, with the help of the Internet as well. But my every effort went in vain. Then, I did something I didn't want to do, I contact DELL technical support. Their solutions ranged from installing the latest drivers (yes, drivers for a software), to removing and re-installing the latest Internet Explorer (yes, they asked me to REMOVE IE) to put the HARDWARE in some other machine. Quite clearly, the 4 support executi'ves I talked to there at DELL had no clue as to what is going on and what is the problem. Then, after a 2 hours chat with another one of them, I was told that they just provide the software, and it is Creative's duty to handle everything later and asked me to talk to you. The email support page do not have the option of support for this software, so I selected some other product but sent my problem.
It would be very nice to know if there exists a solution to this problem, and how should I approach it. It has only been 20 days since I bought this software. Thank you!

Finally, I got a reply from the email team, and they sought some further information, which I duly provided. Then, they provided me with a new CD Key. But here is the thing, they say after 3 times of re-installing the software, I will have to pay for it. What?Why would I pay for something which I bought, again and again? The whole world knows about Windows Vista, how incompatible it is with more than 80% of the software, and it will be the same till SP is released. I have since this Sunday gone have re-installed vista 4 times, once due to the fact that AHCI in the BIOS was not enabled by default, and I had to re-do the installation, then it was SATA drivers not presentonthe Vists disk, then the nVidia drivers had problem with Vista and it crippled it and won't go and then the Windows Media Player , quite clearly still not fully functionable, made my system bust. And I can say that it will happen again, so why do I have to pay some part of the software's price again? I am not using it on any other machine, and that is checked by it's CRC checker anyways, I am not using it for any business project, which shouldn't be a problem even if I did, as I own it. If any of you guys have an answer to this, please let me know.
Thank you, and have a very nice day all!

Creative Soundblaster Live 5.1 (SB02

Hello, I just re-installed windows XP from the scratch, and now my sound card wont work. I've tried to install the correct driver, but Windows won't even recognize that I've plugged in the card. And when I try to automatically find the correct driver, it states that it cant find any. I am sure that the card is working, because it worked perfect before I re-installed windows.
My computer specs are:
System Model: Hewlett-Packard HP d530 SFF(DC578AV)
Main Circuit Board:
Board: Hewlett-Packard 085Ch
Serial Number: FRB4400CXQ
Bus Clock: 533 megahertz
BIOS: Hewlett-Packard 786B2 v2.43 08/0/2004
Graphics Card: NVIDIA GeForce FX 5200 [Display adapter]
Processor: 2,80 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
52 kilobyte secondary memory cache
Controllers: Standard floppy disk controller
Intel(R) 8280EB Ultra ATA Storage Controllers (2x)
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Bus Adapters: Intel(R) 8280EB USB Uni'versal Host Controller - 24D2
Intel(R) 8280EB USB Uni'versal Host Controller - 24D4
Intel(R) 8280EB USB Uni'versal Host Controller - 24D7
Intel(R) 8280EB USB2 Enhanced Host Controller - 24DD
Other devices: USB Human Interface Device
Standard 0/02-Key or Microsoft Natural PS/2 Keyboard
A4Tech PS/2 Port Mouse
HID-compliant Wheel Mouse
USB Root Hub (4x)
The soundcard: Creative Soundblaster Li've! 5. (I think, not really sure)
modelnumber: SB0220
Further numbers on the card: EMU0k-JFF
648D003LQ
P6S490ASUQJT7H
If I've forgotten anything here, please tell me and I will look it up.
I also checked the HP site (the manufacturer of my motherboard) for a BIOS update, did that too. Also, somewhere else on this site there's a post about IRQ's, and how to fix those errors, and I tried that, but I cant find most of the things, like the 'Assign IRQ to USB', 'USB Legacy Support' and 'USB Keyboard Support'.
That would be
http://dmzweb4.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=39,E=0000000000795427,K=3277,Sxi=0,VARSET=ws:h ttp://nl.europe.creative.com/,case=2442
there.
I also tried uninstalling the device, and then re-install, but that didnt work either.
In the devices manager, it states, under other devices, that my Multimedia Audio Controller isnt working, as is my PCI Input Device (they have a yellow questionmark next to them). I've tried to install those drivers countless times, but it cant find any of the drivers, and uninstalling doesnt work either.
(This device is not configured correctly. (Code ))
I'd appreciate it very much if you could help me with this. I've been thinking of buying a new soundcard, but I listened to music this morning, and I cant imagine that it would break down so fast. I've been trying to find a solution for 7 hours now, and still nothing, nothing on the internet at all about this has worked for me. Its a good card too, so I dont want to get a new one
Thanks in advance

ThaDanus wrote:
Well, the thing is, I bought my pc second-hand, and I never got any cd's for drivers with it. And I'm almost certain the soundcard I have wasnt pre-installed, since it's a creative soundblaster li've! 5. card. But like I said in my previous post, now that I have found the driver (not on the creative site but on a driver-site), its working fine again. Just a little disappointed that I couldnt find the driver on your website
This is a well known issue w/ SB022x cards you did have
--> there is another solution available -->
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=272
You can also go through this mod --> http://www.tech-pc.co.uk/audigy-2.php --> you be able to get
the latest drivers and software for Audigy's installed for your card.
jutapaMessage Edited by jutapa on 04-2-2006 0:39 PM

Creative Soundblaster Audigy 2 Zs help

Before I start rambling on about my problem here are my specs (BTW I'm not incredibly computer literate; my dad helped me install everything before I left for school):Cpu: Intel Duo Processor 2.66 GhzRAM: .5 GB DDR2Video Card: ATI Radeon 9600 (soon to be one of their newer models)OS: Windows XPSound Card: Creative Soundblaster Audigy 2 ZS?Ok so I was reinstalling everything after I had to format my computer. I get through installing my creative sound card and figure everything went great. I was playing my music when I had realized that I forgot to configure my sound card for them, as I was getting mono instead of stereo (was only playing out of left speakers). So I go into speaker setup and click on "calibrate speakers" or something like that. Anyway, the speaker calibrator says that It could not be ran for some reason (i forget). I figure that it wasn't working because I hadn't updated anything yet. I update, and I still get the same message. So I reinstalled the software and updated it again and now when I try to run ANY of my creative software related to the sound card (I.E. EAX console, Speaker Setup) it says that "The Audio device supported by this software is not detected. The Application will now shut down."? Now remember that I'm not great with computers, so my solution now will probably sound stupid. But anyways I figured that I had installed the wrong sound card software (it gives me three choices on the disc). I uninstall everything and choose another setting. I still got the same problem. So I try the third choice and I get the same problem. Any suggestions? I've tried all three choices and I still get the same problem.

tony8gj wrote:
I have the SoundBlaster Audigy 2 ZS sound card installed in my Dell 8400 PC. Does anyone know what the latest SoundBlaster Audigy 2 ZS driver version is? I currently have driver v 5.2.4.445 and date 8.7.04 I've tried to install this from the Creative site: SBA2_PCWDRV_LB__84_55-R.exe but keep getting a "setup could not detect and sound blaster audigy 2 on your system" error. The driver on the Dell site is: Creative Labs SoundBlaster Audigy 2 ZS: R92022.exe Thanks! Tony.
Hi
You may first need to patch the driver package by using ctcomp.exe to get std. drivers (eg. not Dell specific) installed to your Dell PC. Search this forum after ctcomp.exe --> there you'll find some instructions too.
You can also find a link to the latest drivers available (I personally use Audigy 4 drivers from november 2005 --> can be found from creative support pages) by searching this forum (I think the latest WHQL version is .~62 for the original version).
jutapa

Logitech z5500 and creative soundblaster l

Hi All?I have had the creative soundblaster li've for sometime and jsut decided to buy a set of 5. thx speakers. After alot of reading i decided to go for the logitech z5500 as they apealed to me the most. But i have one problem I am using the triple audio stereo cable to connect the speakers to my soundcard, when i perform a test through the creative software it only detects the left and right speakers. Is there something im doing wrong here cause it would be nice when performing a test that all speakers are detected. But the sound seems to be there and sounds good?Hope someone can help!!

Yeah, cant anyone answer this. I have the exact same problem here(except I am using Audigy 2 ZS). I reinstalled the drivers and software 3 times, still, same. As a matter of fact, ever since I updated the drivers, the sound quality has gone down.....How is it that Winamp would be able to send sound to all my speakers yet, the utility for the card wouldn't ? Makes no sense at all !! Anyone wants to try to make sense of this.
Thank you.Message Edited by phild on -23-200604:7 PM

Creative Soundblaster Live! 24-Bit External card - noise in right chan

I have a Creative Soundblaster Li've! 24-Bit External card installed on a Dell XPS 40 with 2GB RAM and Windows XP to replace integrated sound that came with the system, a sound problem developed recently that I never noticed before, there is a popping sound in the right channel which isnt loud but noticeable when no other audio is playing, the sound is a fast popping sound like a idling engine, Ive tried updating the Nvidia video drivers, uninstalling software that may have caused conflicts, looking in the bios, I also tried uninstalling the Creative drivers and before installing the drivers again when the system booted and detected the new hardware I could hear the popping noise without any drivers loaded yet, nothing has helped this problem, does anyone have any suggestions of what is causing the noise? Thanks for any helpMessage Edited by Gary040 on -5-2008 07:38 AM

Yes exactly as you mentioned. I have SoundBlaster Li've! 24-Bit Internal and facing the same problem. All is working very good, but only sound in WOW is terrible: it's muffled, degraded and seems to runs only in 22khz.
It is a big irony because i bought this card only for WoW to replace my onboard card and now the old one sounds much better in WoW as the new SB
Anyone with help?
Now it seems that I return my card like you... and people from creative, think about it! WoW is most played game ever!Message Edited by magnetique on 0-06-2006 :24 AM

Anyone as frustrated as i am...just bought a brand new 13" powerbook to find that I can't load my adobe creative suite 2.3 software! i need solutions that do not involve spending more $$$$ one the newest version.

Is anyone as frustrated as i am...just bought a brand new 13" powerbook to find that I can't load my adobe creative suite 2.3 software using the lion os! I need solutions that do not involve spending more $$$$ one the newest CS version. After googling problem, I find I am not the only one. Apple told me Creative Suite 3 would work, but others said no. Version 5.5 seems to be most reliable. Any feedback would be greatly appreciated.

No, you're not the only person who failed to do any homework before making your purchase. You will have to upgrade your Adobe software at the very least. Before you post another complaint about what doesn't run see
About incompatible software (OS X v10.6, OS X Lion, OS X Mountain Lion)
The Lion Compatibility Site

Windows 7 6956 Creative Soundblaster X-FI XtremeMusic NOT WORKING

<div class="postcolor">Hi everyone!
I am running Windows 7 Build 6956 x86. In general everything is running smooth, and no driver problems as well, except my soundcard Creative Soundblaster X-FI XtremeMusic. I downloaded the official Vista drivers, but it does not install my drivers. If I try XP/Vista compatibility Mode, I get an error message, So has anyone has any idea on how to get these Creative drivers working?
I even extracted the drivers using 7zip, but still no luck when i try to install via device manager...
Thanks@78.47.5.72

Thanks, but i got it to work, even the surround sound as wll, all features working, just like it worked on vista. btw am using beta build 7000 nw.
Just download the latest drivers and applications, and install all the creative drivers and applications using the vista compatiblity mode, and everything will work fine.
Message Edited by shahed26 on 0-09-2009 05:3 PM

Creative SoundBlaster Live! 5.1 Digital driver update - wont wo

Hello I've had this problem for as long as I can remember. I have already searched the forum in hope that I would find a solution. I didn't.
Ok, this is how it is. About two years ago I bought computer parts which I assembled together and "Creative SoundBlaster Li've! 5. Digital RETAIL PCI" was one of them.
I have tried every single driver you have under your support page and none of them will work! I always get the message:
"Setup could not detect any Sound Blaster Audio card on your system.
Please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
Setup will now exit."
Right. All drivers gives me this. I know that you guys will probably ask after the serial number now but I'm too lazy to check at the very moment and I know that the serial check will be a SB Li've! 5. digital card anyway so I don't see how that would solve this issue you are having with your, sorry to say this, outdated installs.
The card is installed correctly in the device manager as "Creative SB Li've! series". And how come I can install it from the CD but not from your internet drivers?
I'm using Windows 2000 Professional with service pack 4 by the way.
Is there a chance these installs wont work with latest service packs, that they were designed for earlier service packs and Microsoft maybe changed the way to detect hardware in later service packs?
I'd appreciate any help I can get because I really need to update my drivers, I got a small sound problem now it seems (soundeffects volume goes down and there is a bit of distortion when it's too many of the same sound playing - or when a soundeffect is to loud).
Thanks for a great card in general, I'm going to buy (I don't remember the name now) one of those new cards later on - that is suposed to be over 4 times better than the previous soundblaster cards? .

Hmm, the install extracts files but not in the current directory or in windows temp. How would I extract the content from the install file so I can patch it's
EDIT: I extracted it with winrar and I got the following files:
data.cab
data.hdr
data2.cab
Diagnose.cab
disk.id
Driver.cab
ikernel.ex_
layout.bin
PC3.cab
Setup.exe
Setup.ini
setup.inx
Wstudio.cab
I know there should have been some sort of audio folder here but I didn't find any, so I tried the program and it said patch applied and all that. I try to run setup.exe and it will still not work. Probably because I'm doing it all wrong :P.Message Edited by Ice_ on 06-5-2006 04: AM
EDIT2: Ok I got several driver files so I just extracted "Li'veDrvUni-Pack(ENG).exe" to C:\sb\ and ran the tool as you described. I could launch the install without problems. By the way, Li'veDrvUni-Pack(ENG).exe is containing the latest drivers as well right? So I dont need to do this with "Li'veDrvPack_Patch.exe" as well?
Thanks!Message Edited by Ice_ on 06-5-2006 04:5 AM

Problems with Creative Zen V plus software

*Problems with Creative Zen V plus software Dear friends,
I'm trying to install the software included with creative Zen V Plus but it is not possible - it stops at 63%
I get this following error:
"CTIntrfu.dll can not be installed"
"DoInstall fails to launch E:\PDE\CTXInst\Setup.inx"
I'm using "Windows XP 2002 home edition - serivce pack 2"
I'll appreciate any help.
At the moment my PC doen't recognize the Zen V
Sorry for my english... It's not my language.

Hey Guys,Here is a link to instructions on how How to obtain and to install USB 2.0 drivers in Windows XP Service Pack . http://support.microsoft.com/default...;EN-US;Q329632?Win2000 and later have the capability to support USB 2.0, but USB 2.0 was released after XP was release, so there weren't any drivers installed before Windows XP service pack 2. Make sure you've installed all your windows updates including service pack 2. You can check if you have SP2 by right-clicking on my computer and choosing "properties", it will say on the general tab. Also the way to tell if you have USB 2.0 drivers installed is to right-click on my choose "Manage", then choose "device manager" look down to "uni'versal serial Bus controllers" and click on the + . This will expand the USB devices. Look for the word "enchanced" (USB enhanced host controller). If you see it, then you have USB 2.0 support. If not, use the link above and get the drivers. Hope this helps!?JT

Creative SoundBlaster X-Fi Fatal1ty FPS - Major Problem - RMA Ti

hello. i have been having major problems with my Creative SoundBlaster X-Fi Fatalty soundcard.i have had it since march 2007 and was fine for a couple of months, very pleased with it.?but it has now got to the stage where it will not boot my pc if the card is installed.i have done my best to see it working again. but one moment it will work.?next moment i will turn my pc on. the pc will not post/boot so i have to take the soundcard out in order for the pc to actually boot into windows. i have sent in a RMA request from ebuyer.?but im quite sad that the card is very poorly designed via the pins on the back that connects to the internal dri've bay addon. i believe that the pins are causing the card to not boot the pc. as its very easy for the pins to get bent.?i would love to know if anyone else had or is having a simular problem with this card?i have been looking for a replacement now. and after searching for awhile it would seem they released a Auzentech X-Fi Prelude 7. Sound Card but after checking the card it looks like they still have the poorly designed pins on the back of the card again... [color="#ff0000"]should i wait for a upgrade... [color="#ff0000"]or buy the Auzentech X-Fi Prelude 7. Sound Card?as the card i originaly own is now discontinued from ebuyer. regards, Cezare

card was faulty ordered a new one while i wait for my RMA. and the new card works fine. soon as i installed perfect.so indeed was a faulty card. and to the question did i install the card properlly... of course i did. otherwise i wouldnt have asked here. anyway. all fixed so far... but problems with my new headset now and the soundcard.

Creative Soundblaster X-fi (SB06

Hello,
I was buying a used Creative Soundblaster X-fi (dont know which modell) HP OEM Modell (Specialversion) with the number SB0670.
All the driver I was using was not working.
which driver is the right? Can somebody help me?
Regards,
Dirk

Thank you very much!
Can you send me the driver - or can I download them?
( I need them for Win XP)
Regards,
Dirk

Does creative cloud include any software for HD video screen capture?

Does creative cloud include any software for HD video screen capture? I know that Captivate is not offered but are there other software applications available that do the same job? I am not wanting to make tutorials but I am a filmmaker wanting to integrate sequences with screen capture (which I will edit on Premiere)

Thanks Brian,
Spent some time yesterday doing research on this. There are good reviews and bad reviews for just about every screen capture application out there it seems.
The top-ten reviews gave their gold medal to CamVerce, which I'll probably buy today.
http://video-capture-software-review.toptenreviews.com/
Yesterday I bought the Sonne Screen video which is rated 5th on the top-ten site. (I figured as I'm going to be editing on premiere I shoudn't need to pay for extra editing packages and as I'm not using it to create tutorials I really just want a good quality screen capture for Windows 8). However, I'm not really happy with the image quality on playback and I'm finding the technical assistance really poor from Sonne. I still haven't received an email confirmation from them.
The others that I thought sounded right for me were WM Capture (though the top-ten review had a few negative things to say about it).
Tried a couple of the free ones also. EZvid is very popular.
Will see how I go and let you know. I'm sure this is very subjective and I'm probably not being as clear as I need to be about purpose of use.

"Creative Soundblaster X-FI Fatal1ty" with "Logitech Precision Gaming Heads

I've got the Logitech Precision Gaming Headset and I would like to buy the Creative Soundblaster X-FI Fatalty, but will it make a great difference with this headset(no surround)? The Creative Soundblaster X-FI Fatalty ain't cheap . thxMessage Edited by wvl on 06-29-2006 09:2 AM

card was faulty ordered a new one while i wait for my RMA. and the new card works fine. soon as i installed perfect.so indeed was a faulty card. and to the question did i install the card properlly... of course i did. otherwise i wouldnt have asked here. anyway. all fixed so far... but problems with my new headset now and the soundcard.

Creative Soundblaster Audigy SB0570

Hi friends, start by apologizing for possible misspellings. Creative Soundblaster Audigy I have problems with SB0570. Since I bought this motherboard sound I had only 4 speakers sound without subwoofer and center. When I give test everything works properly. Maybe not something I set myself right in "Creative Audio Control Panel" or Winamp, I run Windows 7 and the latest drivers audio system Genius SW-5.1 3000 5.1 What should I do to work all satellites including subwoofer. I am attaching some photos with my settings. My hardware:
AMD Athlon II X3 455, 3300 MHz
ASRock 880G Pro3
1 x 4 GB DDR3 1333 Team Elite 1333
Western Digital 500GB SATA-III 7200rpm 16MB Caviar Blue KX
SAPPHIRE Radeon HD 6850 1GB GDDR5
Attached Images
1.JPG
(32.6 KB, 4 views)
2.JPG
(38.9 KB, 3 views)
3.JPG
(34.5 KB, 5 views)
4.JPG
(37.1 KB, 2 views)
5.JPG
(35.6 KB, 2 views)

Part. 2
Attached Images
6.JPG
(42.3 KB, 4 views)
7.JPG
(34.4 KB, 4 views)
8.JPG
(33.3 KB, 3 views)
Capture1.JPG
(40.0 KB, 3 views)
Capture.JPG
(45.5 KB, 3 views)

Creative Soundblaster X-Fi Software MB

Similar Messages

Maybe you are looking for