Creative zen micro version 1.11

I have a Creative Zen Micro 2nd hand withno CDwith it. Now I have problem uploading and downloadingthe song onto the player.What software should i be using and where to download

What version of Windows do you have?
I use firmware version ..0 on my 5 Gb Zen Micro on one of my older computers running WinME.
I use Zen Micro Media Explorer as I find it simple to use, but Creative MediaSource Player/Organizer 3.30.2 works too.
If you're running XP, Creative Zen Micro Media Explorer Web Update (48.24 MB or Creative MediaSource Player/Organizer 3.30.2 (52.2 MB) should work for you.

Similar Messages

  • Creative Zen Micro Version 0.0.65 freezes in recovery mode. Please help!

    Hi. My Zen Micro was not booting. When I removed the battery and replaced it, it would freeze in power up. So, I followed the instructions and got to recovery mode and it freezes there too. Please assist!? Thank you so very much!

    That sounds like a bad hardri've. Very easy to replace with compact flash card. http://www.anythingbutipod.com/forum...ead.php?t=7459

  • Creative Zen Micro Software Iss

    I've had my Creative Zen Micro for almost a year now, and I installed the software on my computer. But a couple weeks ago, my family bought a new computer. I've lost the cd to install the zen organizer and I was wondering what I could do?
    Am I out of luck? Or is there software I can download to get it on the new computer.
    You can send comments to [email][email protected]][email protected][/url]
    Thanks so much.
    *popsicle*

    Go to Support-> Downloads, and in the list, select your player (MP3 Players, Zen, Zen Micro). Click on Next, then click on Go. Then download these files, and install them in this order:
    <TABLE id=Table2 cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>. </TD>
    <TD height=5><FONT color=blue>Creative Zen and Jukebox Driver Upgrade version .30.03 (<FONT color=#222222 size=><B>.3 MB</B>) </TD></TR></TBODY></TABLE>
    <TABLE id=Table2 cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>5. </TD>
    <TD height=5><FONT color=blue>Creative MediaSource Player/Organizer 3.30.2 (<FONT color=#222222 size=><B>52.2 MB</B>) </TD></TR></TBODY></TABLE>
    <TABLE id=Table2 cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>3. </TD>
    <TD height=5><FONT color=blue>Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource (<FONT color=#222222 size=><B>9.72 MB</B>) </TD></TR></TBODY></TABLE>
    Cat
    Message Edited by Catherina-CL on 09-2-2006 0:24 AM

  • Creative Zen Micro: Headphone Ja

    Hi! I was thinking of getting a Creative Zen Micro for my fiancee this Christmas, but the problem I keep reading about in reviews is how the headphone jack keeps messing up. It's a shame since we're both anti-iPods and were thinking of better alternati'ves to use. Does anyone know if this problem has been fixed for the newer Zen Micros? If so, is there any way to tell if a Zen Micro is of the newer fixed version, or the old? I really wouldn't want to get her something that breaks two months down the road, but if it wasn't for this problem the Zens are looking pretty slick.

    Well, if it were for myself I wouldn't mind taking a risk, but it's not.. and for over $200 I'd rather get her a product that works, even if I have to pay a little more for it. :/ Does anyone know for sure? I've heard a lot of rumors that it has been fixed, with nothing to confirm it but people hoping their 3rd Micro replacement won't fizzle out, but I figure I might get a real answer by posting on the Creative forum.

  • Creative zen micro transfer prob

    When using Napster to transfer songs to my zen micro mp3 player the following happens.
    License storgae is not working.Contact microsoft product support.
    When I hit click here for more information nothing happens.
    It has worked previously without any problems! Can anybody help??

    Here is a list of things to check:
    ) Confirm you have Windows Media Player 0 installed on your XP SP or later system.
    2) Confirm your Zen Micro has the latest 2.x firmware (2..02 Beta or later). The .x firmware does not support N2G. Download the 2..02 Beta firmware from http://us.creative.com/support/downloads
    3) Confirm KB8922 "Update for Windows Media Digital Rights Management-enabled players" is installed on your XP SP or later system with WMP 0. See http://support.microsoft.com/default.aspx?scid=kb;en-us;8922 for details.
    4) Confirm your Zen Micro's system time is synched to the system time of your computer.
    5) Confirm XP and the Napster client recognize your Zen Micro is connected. It should display under the "Portable Device" object in the "Library" window of the Napster client. The Zen Micro Display should read "Docked". See if you can transfer files using WMP 0. Confirm the Creative Zen Micro Media Explorer version .00. ( http://us.creative.com/support/downloads ) can access your Zen Micro. Can it transfer tracks to the device?
    6) Confirm your firewall is not interfering with the connection to Napster or to the internet for current date and time. Consider disabling firewall, Antivirus, and Spyware Scanners as a diagnostic step to troubleshoot your transfer issue.
    7) Consider reinstalling Windows Media Player 0 and KB8922.
    8) Check the USB cable connection. Determine the USB chipset on your system. There are forum threads where users resolved transfer problems by installing a new USB Adapter with a different chipset or determined the problem was the USB cable. You can also troubleshoot by attempting the transfer on another computer (if available).

  • Creative Zen Mediasource Version 5.01.27 transfers s

    I have a creative Zen Micro 5GB and when I transfer music over creative mediasource version 5.0.27 the files take forever to transfer or they don't transfer at all. I can't update the softwear to the new version of creative mediasource 5, my computer and player wont let me. Is there anything I can do to make my music transfer faster.
    *I updated the firmware on my Creative Zen Micro.

    Battery cunsumption is also the biggest problem for me ...... 7hrs of music over 4 days is not good (with or without the headphones connected) I will try this new firmware and see if it improves things.

  • Creative Zen Micro : Error w Playl

    I'm having problems with transferring an entire imported playlist into my zen micro.
    I've recently updated both my firmware and MediaSource to the latest version. Loaded MediaSource up and imported a playlist that i created using winamp. Then I clicked and dropped the playlist into my zen micro and a new window pops up showing the progress of the songs transferring into it. But while transferring, many of the files had Error under the Progress. Note that I am able to listen to the songs in winamp, but am unable to listen to the "Error songs" in MediaSource. Attached is a screenshot of what happened.
    [img"]http://img.photobucket.com/albums/v483/milo_dinosaur/error.jpg">
    I've tried to create a new playlist in MediaSource, and imported the songs. But it also did not work.
    Also, I found out that under My Playlists in my Zen Micro, there are many playlists named Creative Zen Micro, while the one that I've highlighted was the only one that I've created.
    [img"]http://img.photobucket.com/albums/v483/milo_dinosaur/huh.jpg">
    Went into rescue mode, reformatted the zen micro and even did a clean up. Nothing worked.
    So, can anyone help me see what's wrong? Hopefully someone here can help before I email the Customer Service team again.
    Thanks in advance. =)Message Edited by milo_dinosaur on 0-9-2005 :54 AM

    Yes I'm currently using 3.30.2
    I've finally found the problem. My computer currently has 2 user profiles, the first one is 'Owner' and it's the directory I've saved my mp3 files at. Second one is called 'pokey' (just a nickname, don't ask why! :P) which I frequently use. So, my playlist called 'blabla.m3u' was saved under pokey, which is C:\Documents and Settings\pokey\My Documents\blabla.m3u.
    I opened up my playlist using notepad and saw that it's file path was
    "\Documents and Settings\Owner\My Documents\My Music\Apocalyptica - Bittersweet.mp3"
    So, MediaSource would just tag the filepath of that song as
    "C:\Documents and Settings\pokey\My Documents\Documents and Settings\Owner\My Documents\My Music\Apocalyptica - Bittersweet.mp3"
    That was where it went wrong.
    Now, I save my playlists under the 'Owner' profile, and it works fine. file path shows up as
    "C:\Documents and Settings\Owner\My Documents\My Music\Apocalyptica - Bittersweet.mp3"
    which is exactly where I placed the files.
    So now everything works fine. The thing is that I have to save the playlist in the same profile as where the mp3s are located at.
    The error actually existed because MediaSource couldn't find the file at the designated filepath. I guess it was an error on my part.
    Anyway, thanks for the quick reply! It's really very much appreciated.Message Edited by milo_dinosaur on 0-9-2005 0:24 PM

  • Creative Zen Micro... What could it

    Hello,
    When I tried to update my creative zen micro to the firmware version 2.2, the program froze, and I was forced to close it while the screen was stuck at "Player rebooting... please wait...". Now, when I hook my player to my computer, my computer recognizes it as a portable device under Device Manager named "Creative Zen Micro" and it is recognized in My Computer. When I right click and hit properties on the icon in My Computer it says Firmware Version: 2.2. But when I double click it says it only has a 20 MB space when this player is 5 GB. When I turn my Zen Micro on, the player quickly flashes to "Firmware Problem" before proceeding to the Recovery Mode Screen. Now, each selection in the Recovery Mode works. But, where I'm stuck is when I go into the (latest) version of the Zen Micro explorer, it tells me to connect my device. Also, when I try to downgrade my firmware or run any Creative software that requires the device to be detected, it can't detect it. This is quite odd, considering windows detects it under Portable Devices just fine.
    -I reinstalled all the original software, still no go
    -I reinstalled the original software and upgraded to the latest manually, still no go
    -I reinstalled all my USB port drivers, still no go
    -I cleaned and formatted the player under Recovery Mode, still no go
    All I need to do is downgrade my firmware to a non Plays-for-Sure (since it is the version of installation that failed). But, I just can't get the Creative programs to detect my player.
    Any help would be GREATLY appreciated.
    Thanks in advance,
    Jason

    Alas!
    I got it to work!
    Here's how I fixed it ( in case anyone else has this problem )
    -I connected the player to another computer in the house.
    DO NOT connect the player to a front of the case USB port because the computer had trouble using the player in that port, connect it DIRECTLY to the motherboard in the back of your computer.
    -I installed the software.
    Note: The computer did NOT have a previous version of the software installed at all, ever.
    My laptop and desktop could not recognize my player properly, but they DID have the player installed previously on both of them. (But it also could be because they both have Creative Sound Card software installed, you never know)
    -Zen explorer did NOT detect my player, so I ran the firmware update ( in my case downgrade to . ) installation and VOILAH! It detected my player fine and downgraded it successfully.

  • Creative Zen micro: "Firmware Problem&qu

    hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
    and it goes to the menu (think is called Recovery menu) and it shows:
    Creative Zen Micro V0.0.65
    1.Clean Up
    2.Format all
    3.Reload frimware
    4.Reboot
    now creative tells me to download a new firmware.
    i did.
    then to "RELOAD FIRMWARE"
    and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
    is there any way to fix this or is my zen busted?

    I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
    Remove all creative software and drivers from your P.C
    remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
    Downlaod the latest firmware for your player
    Re-boot/re start your P.C
    Go to the creative support website, and download the plays for sure software suite
    listed as:
    <i>. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 </i>
    install the software by clicking on it.
    RE-boot your P.C, with your player conected via USB
    once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
    Copnnect your player to its charger ( unless it charges via USB)
    On your player slect the reload OS option in the rescue menu
    When prompted by your player start the firmware update on your PC.
    <i>with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.</i>

  • Creative Zen Micro - All time Recovery Mode( Firmware probl

    Good. Staff, my Creative Zen Micro does not give to come back toward the normal version Firmware, appears recoverymode and he never leaves you give, says that he has a problem in the Firmware. They help me

    My version is : 2.2.02_0.00.65 , and i not can feedback the firmware......says on the turn off, Firmware Problem, and he goes to Recovery Mode... Please help me

  • Creative Zen Micro: Error copying m

    Hi,
    My Creative Zen Micro is just a day old and after transferring 20 MP3s it says error on every following track i want to transfer.
    The first 20 Songs were copied but then I cant transfer any more, no matter which one i choose.
    can anybody help me with this problem?

    Can you try a disk cleanup on the player. To run a Disk Cleanup you need to access the Rescue Mode on the Zen Micro. To access the Rescue Mode: remove the battery, hold the power switch to the "on" position and KEEP IT HELD TO "ON" while reinserting the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.
    Failing that, what firmware version are you using, and what software to copy?

  • Creative Zen Micro Quest

    I have a white 5 gig Zen Micro and i love it but...............can someone please tell me how you synch up with Microsoft Outlook.... so that i can use the calender, contacts, and to-do-list features...........also, i've tried going throught the zen micro media explorer but it always tells me the device is connected, although it is, why does this happen and does it have anything to do with me using the latest firmaware (Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 )...........help is appreciated.
    Thank you.

    big_d5,
    If you had update the MTP firmware for the player, you will also need to update the Zen Micro Media Explorer to support the MTP version. Go to the driver page and look for this Zen Micro Media Explorer .00. for Creative Zen Micro (Software Update Package for Zen Micro Players with *PlaysForSure/MTP Firmware).
    Jason

  • Creative Zen Micro 5GB vs Creative Zen Micro SE 6

    hi i am interested in creative Zen micro, but i am worried about its many problems.
    a fruend of mine has just bought a creative xen micro 5GB, but since his 2nd day of use the player is having a great problem with jack connection: the headphones, by one side, dom't work, and it is a jack problem an d not a haedphones problem.
    I wanna know if the same problem occurs with Creative Zen Micro SE 6 gb, or if it is only a problem for 5gb, and what is the maeaning of "SE" (maybe Second Edition) and if this "SE" models have the same problems of the former players or if they are "patched".
    I am sorry for my english but I am italian and I hope that my question is celar and understandable.

    In short, no-one knows.
    Folks here have posted emails supposedly from Creative employees that say it was fixed in later versions, but Creative Support said here that basically hardware updates are made all the time (so didn't answer the question directly).
    SE = Special Edition I think, although there's nothing particularly special about it and it has less accessories than the original version.

  • Creative Zen Micro Not compatible with Windows Vi

    My daughter has a Creative Zen Micro MP3 player, no video feature, just the the music player. She recently got a new computer that runs Windows Vista. She tried to install the program on her new computer, and it said the software was not compatible with Windows Vista. Does that mean I need to get new software from Creative Zen? to use the program on The computer running?Windows Vista? Any help would be appreciated..

    The software that came on the original CD is not supported on vista.
    The Zen Micro will work nati'vely with Vista if it contains the latest firmware version. If the Zen Micro isn't being recognized by Vista then you will need to use an older system (windows xp) to upgrade the firmware on the Zen Micro. Once Vista recognizes the Zen Micro you should be able to download Vista compatable versions of the software for the device from the creative website.

  • Creative Zen Micro - I'm so confus

    Hi there,
    I just got a Creative Zen Micro as a gift to go into my new Uni'versity. I've never owned an MP3 player or iPod or anything before, so everything is so confusing for me! I use a Windows ME system. ... I honestly have no idea what I'm doing with any of this; I read the 9-page booklet, and it really didn't help. How do I get all my songs from my computer into my Zen Micro, and how do I sort them into genres and albums, and how do I play them? And I see a pause/play button, but no stop button.
    Sorry if all of these questions have already been posted, but I'm just so confused on how this works, and would extremely appreciate any help!
    Thanks,
    Esther.

    Another easy way is to use the Zen Micro Media Explorer that came with your player -- Or download the latest version here, for Windows ME, by clicking and hitting the AGREE button:
    http://us.creative.com/support/downl...ows+Millennium
    Among other things, the Zen Micro Media Explorer allows you to easily import music to your player, rip CD's, and organize your music. The program itself is pretty easy to follow on its own, so you shouldn't have any trouble figuring it out.
    Edit: If you're not a fan of clicking random links that lead to downloading large mysterious files, you can also find it in the Downloads section under Support, at the top of this page.
    Message Edited by dingus on 08-7-2005 07:05 AM

Maybe you are looking for