Credit card file upload(Tcode: PRCC) in a batch process

Hi all,
Is it possible to make credit card file upload(Tcode: PRCC) in a batch process.
when i tried doing so got message "frontend function cannot be created in batch mode" .
I am aware that it is because this program is using "GUI_UPLOAD" function module which is for front end only and not for background processing.
But as this is standard program I cannot change method of uploading flat file.
Please suggest me any method to solve my requirement. I need to make credit card file upload in a batch process.
Thanks ,
Snehal

Check mark parameter 'File is not local' for SAP to read file from application server (file is read using open dataset instead of gui_upload). This would allow you to run this tcode in background.

Similar Messages

Reading Credit Card File (Oracle Cloud 11.1.9.0.0)

Hi All.
We have requirement to import Credit Card Transactions into Fusion Expenses to create Expense Reports. We are using Master Card so we cannot connect to the Bank's Server.
1. Can we upload the credit card file to UCM to import into fusion Expenses?
2. We have a SFTP server. Can we place the file in SFTP Server and configure Fusion Expenses to read the file from SFTP Server?
Thanks,
Arun

Hi Varad,
Well, Oracle Metalink actually got it fixed for me! Got to give them credit.
I ran the 1st bit of SQL they sent me and it fixed it so I think it was only cosmetic. I've enclosed all of their response in case others may find themselves in similar situation.
Thanks again for YOUR help too.
Perry
==========================================================
1. Do you see any invalid objects in the database?
2. Please update the SR with the output of running the commands below
1.Connect as SYS.
set serveroutput on (This will let you see if any check fails)
exec validate_apex; (If your version is 2.0 or above)
If all are fine, the registry should be changed to VALID for APEX and you should see the following
message:
PL/SQL procedure successfully completed.
Note : The procedure validate_apex should always complete successfully.
With serveroutput on, it should show why Application Express is listed as invalid.It should show output like:
FAILED CHECK FOR <<obect_name>>
Or
FAILED EXISTENCE CHECK FOR <<object_name>>

Interface: Travel Management - Credit Card Receipt Uploads

According to the SAP presentation "What is new with mySAP ERP 2005: Travel management"...
In addition to the existing credit card interface, a new XI-based interface for the upload of credit card transaction
files has been developed. Corporations can now map the different file formats of credit card companies and
their bank partners issueing the credit cards. This reduces the TCO of the credit card clearing scenario and
creates more flexibility.
Further, in the document "Travel Management: Cookboox for Credit Card Clearing using XI"...
a namespace is shown on page 26 that is listed as "http://sap.com/xi/Travel".
Is this something that can be imported to XI?

Hi,
I just spoke to our finance team and they said they were too far down the road to put it in via XI , but they have some documentation. If you have an email address I can send it to you.
Regards,
Dianna

Inquiry on Credit Card File Format

I would just like to inquire on what are the supported credit card
brand and file format for:
- USBank / Visa
- Barclays Bank / Visa
I see in the Paymetric Onboarding form the type USBC and VCF4, not sure if these are the correct ones we need to use and we are asking for your advise.

Hi,
This information is in the Integration Guide within Service Marketplace. Check out the chapter on integrating credit cards.
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000767426&_SCENARIO=01100035870000000202&_OBJECT=01200252310001…

I am trying to update my credit card details, but it keeps saying we are processing your order - please try again later

my credit has expired, and im trying to update it. but when im trying to edit payment method, it keeps saying we are currently processing your order. please try again later. if this continues to fail, please contact customer support.

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
or
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

I want to edit my itunes credit card account but it keeps saying can not process try again later

why can i not update credit card account. Whenever i try it say can not process try again later. Even if i try again later

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
or
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Credit Card Encryption - executing tcode SSFA

Hi all,
I have searched SDN and various other site for information on what the correct sequence is to execute the tcode SSFA. We have applied the OSS Note 66462 requirements (see below) but cannot figure out how to execute step 5 - can anyone please give any advice?
To activate encryption, your system must meet the following requirements:
1. For Release 4.6C, you must import Support Package SAPKH46C46 and
2. Kernel 4.6D must have patch level 1329 (see Note 565111).
3. For Release 470, you must import Support Package SAPKH47022.
4. For Release ERP 500, you must import Support Package SAPKH50007.
5. Download and install SAPCRYPTOLIB (see Note 662340). You must use the CCARD application when you use Transaction SSFA to set up encryption.
For what it is worth - we are on 4.6C and AFS3.0B

The Basis and Security people got this done

HT1918 i tried to change my credit card went through all steps then says cannot process at this time

why do i get cannot process payment for movie when all i did is change credit card

First, please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are we your fellow users. iTunes Support will never respond to posts made here.
As to your issue, confirm with your bank that they do not block access from on-line services or otherwise have restrictions on with whom a card can be used. For some company cards, such blocks can be set up. If you confirm that no such restrictions are in place, post back and we'll go from there.
Regards.

Error while uploading Credit Card Transactions

HI,
I am facing a problem while uploading a credit Card File.
Error is " Previous Import with Run Number ............... is unsuccessful, please import first."
When I try to upload with previous run number is shows " This Rum number is already imported."\
Please suggest how to clear the previous run number and how I can upload the credit card transactions.\
Regds
SG

I am facing similar problem & tried all the suggestions given above but its not working out. Still the same error:
Settlement run with number 0030112011 has already been imported. An error occurred during import.
If I try importing with other import no., rcd the following msg
Import of last work file with accounting number 0030112011 was terminated. First please import
This settlement run is not available in PRCCD as well.
The settlement run is avaiable in PRTA & is marked as unsuccesfull.
Any pointers?
Since there is no partial upload of transactions, re-loading is not possible because of the error.
Regards
Ravi

PR05 - Problem with credit card documents

Hi all,
When I'm using transaction PR05 and try to upload a credit card document,
the line is added in the table, but the currency exchange rate is not correct.
eg the uploaded document was set in USD, local currency is EUR
normally, when you enter the line manually the exchange rate will be /1.5600
but instead the rate becomes 1.5600.
The calculations in the document itself are correct, but not when I load the document in PR05.
Is this a common issue? Preferably with a solution?
grtz,
Koen

Hi keon,
Sorry this is not a reply to your question. I am in very bad situation in Credit card clearing. I am unable to find any data about how to upload a credit card document into the report RPRCCC00. The file name we have is "download-SAP.csv" . when i tried uploading this file error is coming that the file name is compatable with SAP.I am not getting what extension file name will SAP accept so that Import Credit files will work in this path PRCC - Travel Expenses -> Tools -> Credit Card Data -> Import Credit Card Files
Please help me its really very urgent.
Regards,
Latha

DTW Incoming payment Credit Card

Hi everybody,
I try load by DTW the incoming payments, but can I not load successful the Credit card payment, I don't understand how match the Header Template with Detail Template.
I upload Template file that I use.
Please look up the "Header" file the column "H" show the payment form, the "Payment Credit Card" file show the payment with credit card "matching" whit the header.

Hi Douglas,
try again after doing the following things
1. ORCT - Remove values from Cash Sum for credit card incoming payment transactions
2. ORCT - Enter Series Code instead of series name
3.RCT3 - Give only last 4 digits of Credit card No.
Please revert back with results
Thanks
Unnikrishnan

Credit Card Transaction details

Hi,
Can somebody tell me where can I can all the credit card transactions? through PRCC we will upload the transaction details. Where will those be saved? I want to fetch the transactions in a program. How can that be done?
Thanks a lot!1

Solved by myself.
Solution:
DATA: BEGIN OF tc_key,
        pernr LIKE pernr-pernr,
      END OF tc_key.
DATA: letzt TYPE ptk34_letzt,
      ccbel TYPE TABLE OF ptk34 WITH HEADER LINE,
      inbel TYPE TABLE OF ptk34_inbel WITH HEADER LINE,
      trans TYPE TABLE OF ptk34_trans WITH HEADER LINE.
tc_key-pernr = '00000119'.
import
         letzt
         ccbel
         inbel
         trans
         from database pcl1(tc) id tc_key.
Now, ccbel has all the transactions.

SAP Credit Card Clearing using RPRCCC00 report - posting to FI

I am implementing Credit Card Clearing in the Travel Management Module using report RPRCCC00 (transaction PRCC). I need the report to post to the FI when it imports the credit card file from the bank. The entry to FI would be:
CR Vendor (Credit Card Company)
DR GL suspense account
I have already configured the posting entries when the trip has and settle to FI, which should clear the entry in the clearing account above.
Does anyone know whether there any config in the Travel Management module or user exit/BADi that will enable postings when the RPRCCC00 report is run?
Thanks.

UP !
If someone have any idea ;o)
Thanks

Changing Expense types in the SAP Portal for Credit Card Receipts

Hi Experts,
We have a situation where we load a credit card file to SAP. The employee will then go review and subsequently send the expense claim to accounting. This is done via the SAP NetWeaver Portal. Quite often the credit card company will send over details to an expense type called 'other' this was created to ensure that the credit card file loads. It is the employee's responsibility to change the expense type from 'other' to the appropriate expense type.
what is desired is to provide the user with an error message in the portal and PR05 that will enforce the user to change the expense type from 'other' to a more appropriate expense type.
How can this be accomplished?

Hello Martin,
You can use a User Exit for this.
In Web Portal, you can use the BADI TRIP_WEB_CHECK on which you can use the method USER_CHECK_LINE_OF_RECEIPTS.
In PR05, you can use the Enhancement name: FITR0003: User Exit: Save Trip (PR01, PR04, PR05, TRIP) - before assigning trip number. It is the User Exit EXIT_SAPMP56T_002.
This will check your receipt before saving.
Regards,
Raynard

Credit card expense key to expense type in SAP assignment

When we copy the company paid expense keys provided by credit card company to our custom expense keys(say, MEALS.... to MEALS1..., MEALS2... & MEALS3....) in (V_T702B-Assignment of expense key from Credit card company to expense type in SAP) and assign say ZBreakfast, ZLunch and ZDinner expense types respectively, how will the credit card company assign a 'card swipe' that was done in a restaurant to appropriate expense type ZBreakfast , ZLunch or ZDinner using MEALS1, 2 and 3 keys in their file feed to us? Can someone shed some light on this one? Really need it urgently.
Thanks,
Patt G

Hi,
I think what you are talking about here is to create custom expense keys in addition to the standard 8 expense keys that SAP provides. The standard keys are as below.
CAR.RENTAL
COMMUNICAT
FLIGHT....
HOTEL.....
MEALS.....
MILEAGE...
OTHERS....
TRAIN.....
Now if you are adding MEALS1.... etc then these expense keys should also be coming in the credit card file from the bank and bank should know whento use which key in the file.
I think it is not something which standard SAP supports, you need to make sure the modification/enhancement you are doing are aligned with bank and is working fine in SAP as well end to end.
Regards,
Vijay

Credit card file upload(Tcode: PRCC) in a batch process

Similar Messages

Maybe you are looking for