Cretit control area field - Customer master - mass change

Hi Gurus:
I want to use the customer master mass change program (T.code XD99) to assign a default credit control area for all the customers. However when i try to save the mass changes it does not update the credit control area, and shows an information message "0000500004 : No batch input data for screen SAPMF02D 0900" . Did anybody come across such situation ? and how to resolve this ?
Thanks in advance.

Refer to note 552066, The system is attempting to maintain some ETM data that may not be relevant. May be this applies to you.
Symptom
During the start of the mass maintenance with Transaction XD99, the system generates batch input sessions for the import of the data in the background. In the process the system also tries to supply fields RF02D-D0900 and RF02D-D0910 on screen SAPMF02D 101 with data, although these fields do not exist on the screen. Then the batch input processing terminates.
Solution
The correction of the source code for the generation of the batch input data is described in the corresponding correction instruction. A solution that allows also the mass maintenance of ETM data with Transaction XD99 is in preparation.

Similar Messages

Vendor Master- Mass change to set block function 02 for selected PurchOrg

Hello,
We are using SAP 4.7.
We want to do Vendor Master- Mass change to set block function 02 (T code- MK05 in block for quality reasons) for selected Purchasing Organizations to approximately 2000 number of vendors. I tried this using mass maintenance (T code XK99), but in this case block function of all purchasing organisations gets changed. We want it for certain purchasing organisations only. Kindly suggest the solution.
In case I have to go for a development can you please suggest any functional module/ BAPI?
Can I achieve this using mass maintenance functionality (XK99)?
Waiting for your expert openion,
Regards,
Milind Dumbre

Using the block function in XK05 will block the vendor for all purchasing organizations (as mentioned in the documentation of the field). What you can do is to use purchasing block for the selected purchasing organization.
The field is LFM1-SPERM, and this can be done via mass maintenance using XK99.
Hope this helps.
Regards,
Aroop

Dual Control for Vendor/Customer Master Data

We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?

Dear,
No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
I hope this helps.
Mauri

Credit Control area field not appearing in FBCJ

Hi
I got some amount in cash (advance from customer). Since i got cash, my requirement is that my credit should be increased with that amount.
It works perfectly fine when i get advance in bank. Its because there is field for entering sales credit area in F-29 (advance from customer). But there is no credit control area field in FBCJ (cash journal).
I checked layout also (where i can make fields visible / invisible at the time of posting FBCJ entry). But that field is not there.
Please help

Hi Deepak:
We had a similar requirement while we were going through organization restructuring. We made KKBER (Credit control area) parallel to product division in SD and were planning to book all collections with respect to KKBER but FBCJ was the main hindrance in doing so. We raised an OSS note and their reply was as
Dear Customer:
My understanding is that you want to enter "Credit Control Area" during
FBCJ. I am sorry it is not support by standard program. We received
several same cases from other customer and develper replied as below:
There are two ways through which this is possible. But both are in
combination with a modification.
1. If rules are definite and no manual input is necessary customer can
use a substitution at point 2.
But note that fields BSEG-KKBER is not free to substitute in
standard.
This could be changed - but it is a modification.
Therefore please take a look at note 842318 under 2. b).
2. The other way is to enhance the table 'TCJ_POSITIONS' and the Dynpros cash journal. This could be done like described in note 214104. In
this note the field assignment was added to the screens of cash
journal. This is only an example for what to do. Split screens are
not considered in this note. Are enhancements of the split screens
necessary? All enhancements have to be done in manual and are
modifications.
Ultimately instead of going for modifcation in standard screen of FBCJ we resorted to block cash collections in FBCJ and routed them all through F-28 or F-29. Please aslo have a look at 1068200 . Hope this piece of information will help you.
Regards

Credit control area field not appearing in XD02

Hi
In my ZDOM customer account group, i have made credit control field as mandatory. Hence it appears in sales area data when i create customer (i.e. XD01).
When i do XD02 (to change credit control area), credit control area is getting hidden. Its not appearing in XD02. Please help

Hi Meenu,
You will have to use T code OB20 here in order to make the Credit Control Area field visible in T code XD02.
The only problem here is that when you make the field Credit Control Area visible in T code XD02 using T code OB20, it will be visible for all account groups, not only for account group ZDOM.
Please check this out.
Thanks and Regards,
J Nagesh

How to make Credit Control Area field mandatory in fb01, f-01, f-02, f-04

Dear all,
Whenever we are trying to create any accounting document for a Customer, we need to make Credit Control Area a mandatory field in transactions fb01 / f-01 / f-02 / f-04.
This is required because we have different Credit Control Areas for different Sales Areas for a Customer.
Can this be achieved through Customizing (making screen field mandatory) or one needs to use user exit?
Another option could be screen variant, however, it would result in multiple t-codes e.g. zfb01 / zf-01 / zf-02 / zf-04
I appreciate your help in this regard.
Thanks and Best regards,
SAP_ROI

Hi,
You need to write validation rule for to make Credit Control Area field as mandatory field for the Transaction codes FB01 / F-01 / F-02 / F-04 and please use T. codes GGB0 & OB28 for the same.
Regards,
Shailesh Verma

Customer master data change -XD02 Disable all filelds except text screen.

Hi SAP Experts,
Have any idea please forward immediately.
In cusomer master data change XD02 all filelds should not be changed by specified users and the user should be able to update the text screen where as am giving the path below
XD02>company code data>Extras>Texts>Double click on accounting text screen. then it directs to text screen.
here user can update the information.
Since the Master data fileds can be change by the diffrent team like the details of address.... and the other users team from same dept. should not able to change address...and all other fileds in XD02 except the text screen.
Is it possible to develop in xd02 . if it is please explore what are the ways...
Regards
venkat

Hi
As said by GSL goto OB20 and select "change customer centrally" and in the
general data
company code data
sales data
select the required fields and check the radio button "display"
if you suppress you cannot find the fields at all
regards
prashanth

Table name for Customer Master data-Changes

Hi,
I want to see the changes made in Customer Master Data where i can get this
Scenario is like someone has changed the customer master data in past, We want to know who has changed it or when it has been changed
from WHICH Table I can get this information?
Note:
I need the Table name only in which we can know who has changed it or when it has been changed or What are changed by them
Thanks in advance,
Best Regards,
Chandramohan

Dear Chandramohan,
Try this option you can get the change details clearly
Go to XD03 transaction enter your customer number and other details then go in to the general data from here you to Menu>Environment>Account changes-->Click on All fields now system will give the list of fields which were changed from these list you double click on the single field system will take you to the details of that again you double click on that now system will take you to more details about the changes.
I hope this will help you,
Regards,
Murali.

Maintain Change Pointer for Customer Master?(change in Master data)

Hello everyone,
i want to capture change in master data .whenever a change happen to required field in customer master an idoc should be create for that and the entry should e made in table CDHDR and CDPOS.
Please tell me the entire process how can i achieve this .

Hi,
Tables / Functions:
The change pointers are stored in tables BDCP and BDCPS.
With release ECC 6.0 SAP delivered a new table BDCP2 for increased performance. Which table shall be used is defined in transaction BD50 (see below). There is a function to migrate “old” change pointers to the new table.
The function group BD01 contains function modules for reading and updating the new change pointers in table BDCP2.
BDCP
Change pointer
BDCP2
Aggregated Change Pointers (BDCP, BDCPS)
BDCPS
Change pointer: Status
Prerequisites:
There has to exist a Change Document Object (CDO) for the SAP-object we change. For standard objects like material masters, vendors or customers these objects already exist. For own business objects we have to define a change document object with transaction SCDO .
In the corresponding data element for the database field the flag „Change document“ has to be active. check the details in the transaction
The usage of change pointers has to be actived generally for the system
Transaction BD61

Custom Master Page changes wont apply to few page layouts

Dear All
I'm having issue applying custom branding to SharePoint 2010 sites.. Branding works overall fine but it doesn't apply to few pages.
For example if I click on Enterprise and Metadata Keyword Settings in Document library the changes are not applied. I notice it's a page called metadatacolsettings.aspx in layouts and I see it references application.master.. Similarly I see couple
of other pages out of sync and all of them have application.master as Master Page..
Any ideas why this could be happening.. Please let me know
Thanks

Hi,
pls check below links
There are a few things to consider.
Have all page layouts / master pages been checked in and published / approved?
Have you created a new page using the custom page layout?
Are you creating or modifying this content?
Keep in mind, the progression of rendering goes as follows:
masterpages determine the ASP.NET structural layout.
Page Layouts determine the SharePoint structural layout based on the masterpage ASP.NET structural layout.
Your .aspx pages determine what content to display based on the Page Layout SharePoint structural layout.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/00d354cd-e49b-429f-8648-50251e1b39a0/changes-to-page-layout-not-refelected-when-using-custom-master-page?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

Material Master Mass Change

Hi Experts,
PLease explain me abt the mass change of Material Master.. the detailed steps to be followed for the change
I know the tcode MM17, please explain the process in that transaction

You also have tcode MASS for more mass modification.
Use object type BUS1001 and generate. Then you have to know the tables where the field you want to modify is.
Pick the fields in their folder and generate again. Then in selection pick the materials or use other selection criteria. Generate again.
In the upper side of the screen insert the data and click the button 'carry out a mass change'.
Save and leave.
Regards

Control PO field one user can change

Hello,
We are implementing SRM 7 with ECS.
We want to restrict fields a user can change in a Purchase order. How can we achieve that? For instance we do not want the user to be able to change cost assignment.
Thanks in advance.

The visibility and editability are controlled by IMG in SRM 7. In SPRO,
SRM server >> Cross application basic settings >> Extensions and field controls >> Configure field control >> Configure controls for fields of substructure
There you can hide or make accounting information display only.

Customer Classification mass change...

Hello ABAPERs,
How will i create a mass change custom program that would update the classification of a customer.
Enter the following criteria
Customer Number: 10012428 to 10012444
Customer classification: 03
Sales Organization: S062
Distribution Channel: 11
Division: 01
Customer group: 06
Execute the program
A list of all customers to be updated should be displayed
Only customers 10012428, 10012432, 10012437, and 10012444 should be displayed
A "next" button should be pressed that will redirect to a new window where the classification can be added. Add the following:
Class = BACKORDER
Max Days B/O Allowed -Customer = 0
A section where classification can be added w/ the value
execute...
A confirmation should appear that the changes were made. Customers 10012428, 10012432, 10012437, and 10012444 should have the new backorder class...
Please help me on how will I create my program... thanks in advanced.

Hi
The following t-codes and link will be useful to you
V/N4 Free goods types - Sales
V/N5 Free goods: Procedure for SD
V/N6 Free goods procedure determ. SD
VBN1 Free goods - Create (SD)
VBN2 Free goods - Change (SD)
VBN3 Free goods - Display (SD)
M/N2 Create free goods table
M/N3 Display free goods table
OMA5 Field catalog V_T681 free goods (SD)
V/N1 Maintain accesses (free goods - sls)
V/N2 Create free goods table
V/N3 Display free goods table (SD)
WC07 Number ranges for free goods
Mohan

MM42 data (Article master) Mass change BAPI????????

Hi All,
Is there any BAPI exist which can be used to change MM42 data (Article master).
Like requirement is to do mass change in article, but the MM42 BDC is taking too long to change in all Articles.
Any help for BAPI name will be appreciated.
Regards

use this function MATERIAL_MAINTAIN_DARK_RETAIL

Material wise Sales area and customer master

Hi,
Suppose I have a plant 4002, if i want to see all the material of plant 4002 then i can see those to following MM60 transaction code but if i want to see a particular material and that material is belongs to which sales area and which customer master then how it could be possible .
Regards
Jibanjyoti

Hi,
You cannot see a material on customer basis unless it's MTO scenario, still try in t-code MB52.
Otherwise try in table level as suggested above.
Reg,
JJ
Edited by: Jagsap on May 26, 2011 2:01 PM

Cretit control area field - Customer master - mass change

Similar Messages

Maybe you are looking for