Criteria item is not being used in the LOV query

Hi All,
I have one 'messageChoice' bean which is associated with a view
I have configured it correctly
I have one 'messageLOVInput' bean
above 'mesaageChoice' acts as criteria item for 'messageLOVInput'
I created two maps one for each beans
When I select a value from 'messageChoice' and click LOV button
now LOV window should query based on the value from choice..
but its not at all taking choice selection in the query criteria...
Where I am doing mistake..?
Thnaks
-Praveen

Hi,
we are gathering JDeveloper 11 technology preview related question in a separate forum
JDeveloper and OC4J 11g Technology Preview
Frank

Similar Messages

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

Partial fields of Secondary index being used by the DB Optimizer

Hello,
I have written the following Query to select an std. SAP Index from GLPCA~1. However, when i run the SQL trace although the index is selected by the DB optimizer the results say that only 3 matching columns were used.
bold Index GLPCA~1. bold
KOKRS
RYEAR
RPRCTR
RVERS
RACCT
    SELECT rldnr
           rrcty
           rvers
           ryear
           rtcur
           rpmax
           rbukrs
           rprctr
           rfarea
           kokrs
           racct
           hslvt
           hsl01
           hsl02
           hsl03
           hsl04
           hsl05
           hsl06
           hsl07
           hsl08
           hsl09
           hsl10
           hsl11
           hsl12
           kslvt
           ksl01
           ksl02
           ksl03
           ksl04
           ksl05
           ksl06
           ksl07
           ksl08
           ksl09
           ksl10
           ksl11
           ksl12
           FROM glpct
           INTO TABLE i_glpct
           WHERE kokrs = 'BFS'
              AND ryear = p_gjahr
              AND rprctr IN r_prctr
              AND rvers = '000'
              AND racct IN r_acct.
Now i am not sure which of the above 3 fields of the where condition are being selected but probably KOKRS and RVERS are not being used by the optimizer.
Any pointers on how to make the optimizer utilize all 5 fields would be greatly appreciated.
Thanks,
Minhaj.

Hello,
I have written the following Query to select an std. SAP Index from GLPCA~1. However, when i run the SQL trace although the index is selected by the DB optimizer the results say that only 3 matching columns were used.
bold Index GLPCA~1. bold
KOKRS
RYEAR
RPRCTR
RVERS
RACCT
    SELECT rldnr
           rrcty
           rvers
           ryear
           rtcur
           rpmax
           rbukrs
           rprctr
           rfarea
           kokrs
           racct
           hslvt
           hsl01
           hsl02
           hsl03
           hsl04
           hsl05
           hsl06
           hsl07
           hsl08
           hsl09
           hsl10
           hsl11
           hsl12
           kslvt
           ksl01
           ksl02
           ksl03
           ksl04
           ksl05
           ksl06
           ksl07
           ksl08
           ksl09
           ksl10
           ksl11
           ksl12
           FROM glpct
           INTO TABLE i_glpct
           WHERE kokrs = 'BFS'
              AND ryear = p_gjahr
              AND rprctr IN r_prctr
              AND rvers = '000'
              AND racct IN r_acct.
Now i am not sure which of the above 3 fields of the where condition are being selected but probably KOKRS and RVERS are not being used by the optimizer.
Any pointers on how to make the optimizer utilize all 5 fields would be greatly appreciated.
Thanks,
Minhaj.

An index can not being used and still afect a query performance?

Hi i have a query with a high cost so i created two indexes, A and B, to improve its performance.
After the creation of the indexes when i reviewed the execution plan of the query the cost had been reduced, but i noticed that the index B is not being used,
and if i try to force the query to use index B with a HINT the cost increases, so i decided to drop the index B.
Once i droped the index B i checked the execution plan again and then i noticed that the cost of the query increased, if i recreate the index B the explain plan
shows a lower cost even though its not being used by the execution plan.
Does anyone know why is this happening?
An index can, not being used by the execution plan and still affect a query performance?

user11173393 wrote:
Hi i have a query with a high cost so i created two indexes, A and B, to improve its performance.
After the creation of the indexes when i reviewed the execution plan of the query the cost had been reduced, but i noticed that the index B is not being used,
and if i try to force the query to use index B with a HINT the cost increases, so i decided to drop the index B.
Once i droped the index B i checked the execution plan again and then i noticed that the cost of the query increased, if i recreate the index B the explain plan
shows a lower cost even though its not being used by the execution plan.
Does anyone know why is this happening?
An index can, not being used by the execution plan and still affect a query performance?You said that is what is happening, & I believe you.

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me?

I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.

In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import. It does pretty well on basic things, though.
If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
SG

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

Can i revert back to the ios 5 maps on my pad. Im not quite satisfied with the maps being used on the ios 6 especially the street/ regular map

Can i revert back to the ios 5 maps on my pad. Im not quite satisfied with the maps being used on the ios 6 especially the street/ regular map. It looks good but some details like gas station, restaurants, sidestreets which are good references when travelling are not there anymore.

Load this map and save it on your Home Screen
https://maps.google.com/

Error message when trying to play music on computer states The song ... could not be used because the original file could not be found. However, my library shows how many items and the GBs used. How do I locate the files?

When I try to play my iTunes music on my computer, an error message comes up and state "The song (title of song) could not be used because the original file could not be found. Would you like to locate it?
When I click on Locate It, I cannot find where the music file may be located. Does anyone have any suggestions?
This all occurred when I attempted to do a backup to an external hard drive. Unbeknownest to me, the files did not copy over and do not appear on the external hard drive.
When I open my iTunes library, at the bottom of my music list it shows how many songs and the GBs, so it appears that the files are still there; however, cannot be located.
Thank you.

Hi angela dfromtx,
When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. You'll have to locate the file manually if it is still available. For more information refer to the following article:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

Cannot delete an old vault that is not being used.

Cannot delete an old vault that is not being used. I get the following notification: The operation can’t be completed because the item “#3 Vault-GTech RAID mini-1TB” is locked. I placed this vault on a external HD until I set up a new vault with the same name in Aperture.
Now I want to delete the older Vault. Any suggestions? Thank you, Bob Stern

OK think I have it, but you'll need to use the terminal window and sudo to do this If you never used either then read this carefully before you begin.
start
Open a terminal, go to /Applications/Utilities and click on the Terminal app.
Type the following but do not press return: sudo chflags nouchg
Make sure to enter a space at the end of the above command
Go to Finder, locate the vault and drag it to the Terminal window at the end of the above command. The mouse pointer will turn into a green plus sign showing you your are dragging the file.
When you let go the full path of the vault will be at the end of the command, now press return.
If this is the first time you are running sudo you'll get some text telling you to be very careful. You'll also be prompted for your password, enter it.
Back in Finder in the Info window for the vault the Locked checkbox should be clear.
that's it
good luck, post back if you have any troubles.
regards

Stoarage location is not being reflected in the outbound delivery

Hi
I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery . Since this storage location is WM managed hence the WM status shows that the transfer order is not required .
When i tried to put manually the storage location the system throws an error that this storage location in not maintained in plant R001 .
Althoght the stoack has been there in the stoarage location with resepct to plant ans also the matrerial master is also been extended for this storage laocation and all the respective views such as WM and Sales hasbeen maintianed .
Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
Thnaks and Regards
RAJ K

Hi,
did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
stor.conditions (table TVKOL)?
Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
Regards,
Ely

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

Criteria item is not being used in the LOV query

Similar Messages

Maybe you are looking for