CRM 2007 Interactive OLTP Reports - Showing No Data

Hi,
I am using CRM 2007 with in-built BI client and wanted to activate OLTP interactive reports. I have done settings as per C41_BB_ConfigGuide_EN_DE.doc document provided by SAP. But when I am executing these OLTP queries this shows these error .
1. System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6]
2. OLAP: General error on BI side.
And shows no data.
Please suggest a solution.....
Best Regards,
Lokesh Kumar
Edited by: Lokesh Kumar on Mar 9, 2009 2:59 PM
Pls reply someone

Hello Lokesh,
In SM30 maintain the Table SMOFPARSFA for the PARAMVAL field vaue of your BI interactive client.
I think it should help.
Best regards,
Partha Das

Similar Messages

CRM 2007 Interaction centre : Enhancment deletion causing a Dump error

Hi,
To carry out some development I need to delete the existing ehnacement for BuPaCreate page however the enhancment for Bupadetail exist.
On executing the CRM 2007 Interaction center application Bupasearch page trigger and on pressing the create button it results in the dump in class CL_CTHMLB_CONFIG_UTILITY.
Thanks & Rgds
Sandy

Hi Sandy,
Have you already deleted the enhancement, To me it looks that your configuration got corrupted. May be that you had some Z attributes in the enhancement what you have deleted and it is still present in your configuration. Delete the config and try the standard config.
Check other dependency of the deleted configuration.
Thanks,
Vikash.

Purchase Order Report Showing Delivery Date

Hello All
I am looking for a report which will show Purchase orders with delivery date . something like ME2N but it is not showing delivery date.
Regards
Yogesh

Hello Guys
Thanks for your answers but it seems no body have checked it.
Vishal : I am looking for a standard report and not table.
Ranga : In SPRO field delivry date in not there under new scope of list
Chidanand: Boss ALLES not giving delivery date.
Please tell me some other way.
regards
Yogesh

Report shows no data in the Viewer

Hello,
i'm new to Crystal Reports and i have to develop a few Reports.
I load the data with a stored procedure form a sql-server. This is working and i get all datas i need. But the Report Viewer doesn't show any data.
I don't know why.
If i do it over a select statement and not a stored procedure, the Report Viewer shows me each data set up to 9 times.
I'm working with three tables.
Here is the c# code i wrote.
command = new SqlCommand();
command.Connection = connection;
command.CommandType = CommandType.StoredProcedure;
SqlParameter myParam = new SqlParameter("@FormulareAuftragNr", SqlDbType.VarChar, 5);
myParam.Value = AuftragNr;
command.Parameters.Add(myParam);
command.CommandText = "dbo.Abfrage_Arbeitsplan_Bericht";
connection.Open();
SqlDataAdapter dataAdapter = new SqlDataAdapter(command);
ds = new DataSet("ABC");
dataAdapter.Fill(ds, "dbo.Abfrage_Arbeitsplan_Bericht");
druckarbeitsplan.SetDataSource(ds);
CR Version : latest
VS Version : 10.30319.1
OS : Windows 7
it is for an Windows App
Johannes

CR Version : latest
That is not enough info. All my content below is based on the assumption that you are using CRVS2010 (V. 13.x)...
The code does not show you loading an actual report(?). Also, I'm assuming that after:
druckarbeitsplan.SetDataSource(ds);
you have code to show the report in the viewer or you're printing exporting the report?
For datasets see [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533323335333433333332%7D.do] KB. Also, make sure you are using the full 4.0 framework, not the client framework.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Print link on report shows 'no data found' when LOV has not been used

Hi all,
I have a simple standard report that queries data based on the value in a Select List. This Select List allows users to pick a year for the report. The LOV has a default of TO_CHAR(SYSDATE,'YYYY').
If I open the page using the associated Tab everything wotks OK. However, if I open the page via a button on my home page, the prink links fails:
The page opens OK, the select list defaults OK and the report shows the correct data. However, if I click on the 'Download as CSV' or 'Print' links I get 'no data found'.
If I update the LOV to 2010 everything works. If I set it back to 2009 evenrything works. I just cant get it to work when I open the page.
I have tried adding computations to get this to work, but this does not seem to help.
Any ideas?
Thanks,
Martin

Hi,
It would depend on what has been added, if anything, to the redirect. The redirect should just function as though you had typed in a URL into the address bar and pressed Enter. The page doesn't get submitted, so any data entered onto the page itself is, unless it is already in session, lost. A button, however, should submit the page and Apex will store all values in the session. So, if the value you need for the LOV is from the previous page, then this is the preferred method - but, note, that the redirect can also store values provided the page item name and the value is included in the redirect's URL string
Andy

Financial Tax Register Report shows No Data Found

Hi All,
We are upgrading from 11.5.10 to 12.1.3, ofter upgrading to 12.1.3 when i running the Financial Tax Register Report it is showing No Data Found.
Please reply me ASAP.
Regards,
Raju.

Hi,
For your references i posted the log file of financial tax register report.
E-Business Tax: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RXZXPFTR module: Financial Tax Register
Current system time is 15-FEB-2013 09:38:25
Publishing concurrent program ZX : RXZXPTEX.
Request 487766 submitted.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Current system time is 15-FEB-2013 09:38:25
Request restarted at :15-FEB-2013 09:38:27
Publishing concurrent program ZX : RXZXPTEX.
Publishing request ID 487766.
Its a BIDI char set
Its not a BIDI language
FA_RX_SUBMIT_PURGE (PURGE API PROGRAM NAME =ZX_EXTRACT_PKG.PURGE) (ROWS PURGED =0)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
36093
------------- 1) PRINT   -------------
Printing output file.
Request ID : 487765
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 15-FEB-2013 09:38:28
---------------------------------------------------------------------------

Crystal report showing Incorrect data against Bex Query

I have created Crystal report on top of Bex Query, I have not done any calculations in the report, just dragging structure and key figure in the report, ran for one month, when I compare with Bex Query with same period, it is showing incorrect data.
I don't know what can be wrong here?
We are Business Objects 3.1 SP3.
Thanks,
Ravi

HI,
I would suggest you trace the workflow in Web INtelligence according to these notes:
Tracing:
Unix : Note 1235111
Windows : Note 1260004
and then post a link for downloading the trace files here.
regards
Ingo

SQL Server 2008 R2 Disk Usage report showing incorrect data file

When I go to ANY database (System, AdventureWorks*, user) in Managemant Studio, I right-click on the db, select Reports, select Standard Reports, and select Disk Usage. The disk usage report shows the correct db on top, but always only shows AdventureWorks_Data.mdf
when I expand Disk Space Used by Data Files section. This happens to any db I try. When I look at Database Properties/Files for that database, the logical and physical file names are correct.
Since the correct files appear in Database Properties/Files, I'm hoping it's just a bug in the report. Same thing happens if I run a Disk Usage by Table report for ANY database, The tables for AdventureWorks always only appear,
Thanks, Mike

Thanks Tibor!
I looked at the Properties for my login under Security/Logins and it shows my default db to be master. Not sure if this is correct, but it sounds plausible. I'll see if I can report the problem.
The only issue I can think of that was out of the ordinary for the install of 2008 R2 EE was this:
I originally installed 2005 DE, since it wouldn't expire. After the install of 2005 DE, I decided to uninstall it and install 2008 R2 EE. In between the installs of 2005 DE and 2008 R2 EE, I installed/uninstalled stupid stuff like 2008
Express, 2008 Express with Advanced Services (?), and 2008 EE. After each uninstall I also did a system restore to be safe.
Now each time I open Management Studio, i get a pop-up stating that there are SQL Server 2005 registered servers on my sytem and asks me if I want to add them into Management Studio. I always say no.
The AdventureWorks db is from 2005 and was installed automatically with 2005. I installed the 2005, 2008, and 2008 R2 AdventureWorks databases to my R2 for class. I'm not sure now if the Disk Usage report is showing me AdventureWorks_Data.mdf
because of my install into 2008 R2 EE or my previous install of 2005 DE.
Hope this kind of makes sense...
-Mike

Report showing wrong data

Hi Gurus,
When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
Thanks,
Rafi

Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
if all are good then try to add other column from any other dim and then do the same as above
repeat till you know the cause.
Pls mark if helps

CRM 2007 - Interactive Reporting Error

Hi Gurus
I am following Best Practice Guide C41 to configure the Interactive Reporting.
In the section titled: Activating Delivered Reports and InfoTypes (CRM)
This configuration is to take part in the CRM Client (Content Client) I received a number of messages of this nature: Source System xxxCLNTyyy is not Active for this BI.
Where xxx = System & yyy = Client Number.
I'm sure it's a basis config mistake but I'm sure I've done everything correctly as per the Guide.
Many Thanks in advance
Panduranga

Anyone know how to solve this?

PO report showing PO date and qty deliverd date

Hi ,
Do we have any standated report for MM which show the Po no, Po date, material, description, delivered qty and delivery date..
regards
rajesh

Hi Pankaj,
Thanks a lot for your prompt reply. As you said in ME2M / ME2L in delivery schedule we can see the delivery date, but the delivery date is the one which we are maintaining in the purchase order, i would like to know the (Delivered date ) exact date on which the qty has been deliverred to us .
Regards
rajesh

Report shows "No data found" when validation fails

Hi folks,
I'm new to the OTN and have a short question regarding validations/report pagination.
We are using Apex 4.0.2.00.07.
I have a page containing a report with three columns.
First column is a checkbox (f30), the second one a date picker and the third one is a value field (f34).
I'm trying to build a validation for the value field (should only allow numeric values, but is varchar2) and used a validation with "Function Returning Boolean".
The PL/SQL code is:
DECLARE
vrow BINARY_INTEGER;
v_number FLOAT:=0;
BEGIN
FOR i IN 1 .. APEX_APPLICATION.g_f30.COUNT
LOOP
BEGIN
vrow := APEX_APPLICATION.g_f30 (i);
v_number := to_number(APEX_APPLICATION.g_f34(vrow));
RETURN TRUE;
EXCEPTION
WHEN OTHERS THEN
RETURN FALSE;
END;
END LOOP;
END;
The validation works fine, but every time I enter a non numeric value and the validation fails (error message is displayed correctly as notification) I get a "report error: ORA-01403: no data found" in the pagination area of the report.
Tried to disable pagination completely, but the error still displays when the validation fails.
Any help would be appreciated.
Thanks in advance and regards
Sandro

Content of the checkboxes is ok, debugging showed
1:7
2:8
(records 7 and 8 where ticked)
Debugging console also shows:
     0.10900     0.00000     Processing point: Before Box Body
     0.10900     0.00000     Region: Shareclassinformation
     0.10900     0.00000     Item: P59_IS
     0.10900     0.00000     Item: P59_NA
     0.10900     0.00000     Item: P59_CO
     0.10900     0.00000     Region: Attribute Selection
     0.10900     0.00000     Item: P59_LO
     0.10900     0.00000     Item: P59_ID
     0.10900     0.00000     Item: P59_IDAH
     0.10900     0.00000     Item: P59_IDAT
     0.10900     0.00000     Item: P59_SHO
     0.10900     0.00000     Item: P59_UTD
     0.10900     0.00000     Item: P59_X NA
     0.12500     0.00000     Region: Attributes
     0.12500     0.23400     Item: P59_NOT
     0.12500     0.00000     show report
     0.12500     0.00000     determine column headings
     0.12500     0.00000     parse query as: DB
     0.35900     0.14100     binding: ":P59_LOV_AT"="P59_LOV_AT" value="64"
     0.35900     0.00000     binding: ":P59_IDT"="P59_IDT" value="51"
     0.50000     0.01500     print column headings
     0.50000     0.00000     rows loop: 20 row(s)
     *0.51500     0.01600     report error: ORA-01403: no data found*
     0.51500     0.00000     Computation point: After Box Body
...

Service Level Tracking Reports show no data from the data warehouse db.

Hi, I have some Service Level Tracking reports that will only show data from the last few days. If I select last month as the time frame, there is no data displayed. All of these reports have previously worked fine. Nothing to my knowledge
has changed, and it appears that the data is still being collected in the data warehouse database. Any thoughts would be greatly appreciated.

Is this meant for SCOM forum
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Need: report showing modification dates for all files in WA

We're having struggles in our first major product release of BC4J components on OC4j
using OSCM for version control.
Mood and release processes are getting more and more extreme as a result of not
being able to easily manage our release configurations (CM).
We're desparately in need of a report that shows:
- what files have been modified VS a configuration name.
- What files have been modified since I refreshed my WA
In both we need to be able to print the list.
Any sql scripts to share or cmd line script would greatly be appreciated!
Thanks,
curt

David,
Great, I'm making progress! Thanks.
Yes on the CLI compare of two cfg's, got this working. THANKS
use of the -fs<myfile> exports this to a printable file too.
Work in progress:
- Compare a cfg{N.M} to what's in a pwa or what would be in a pwa if refreshed?
Experiments here haven't yeilded good results:
CLI: set workarea myReleaseWA
CLI: compare -rpmyCfg{1.0} -rpFolderInWA{MAIN;LATEST}
Some how the directory walking is comparing apples VS oranges and all paths are different.
- What files have been checked into a branch and I would get if I refreshed my PWA?
Your SQL above doesn't exactly do this from my experiments.
The c.spec_entry is null filters on currently checked out files.
Config. Management may (usually) doesn't care about checked out files, just new checkins that
a new release would get from a download latest.
The best I've been able to hack are:
CLI: set workarea my_release_pwa
CLI: dir -s-nh-u-pth
Since dir doesn't support -fs<myfile> or >myfile one needs to cut and past and save to a file
or use CLI in one shot mode.
This allows for greping/searching on current month and looking for files newer than the last release date.
Another SQL based solution that orders the above same info from dir (I'm guessing?) is:
select w.NAME wa_name
,va.changed_by
,to_char(va.date_changed,'DDMONYY HH:MI:SS')
,va.created_by
,to_char(va.date_created,'DDMONYY HH:MI:SS')
,jr_name.get_path(c.object_ivid,'VLABEL') obj
from i$sdd_wa_context c
,i$sdd_workareas w
,i$sdd_version_associations va
where w.irid = c.workarea_irid
and w.name = 'smithc04_commissary_wa' ---- my pwa
and va.to_ivid = c.object_ivid
and c.spec_entry is not null
and va.date_changed is not null
order by va.date_changed desc
/This creates the same report as from dir only sorted conveniently.
Still the use case question hasn't been precisely answered. I'm still guessing what new files/versions
would be downloaded vs a release configuration or vs my [release_pwa]?
I'm alot closer though and thanks,
curt

Site web analytics report shows no data

Hi All,
A user reported that they could not view the site web analytics report
in the SharePoint 2013 production server. It was working fine a few couple of weeks back though.
I started the troubleshooting for this issue and came cross a few blogs that details the same issue.
There were my steps:
In Central Admin (CA) >> Service Applications >> Usage and Health data collection was
started.
CA >>
Monitoring >> Reporting >> "Enable usage and health data collection"
was checked.
CA >> Monitoring >> Timer Jobs > Review job definitions
>> Microsoft SharePoint Foundation Usage Data Import
(5 minutes) and Microsoft SharePoint Foundation Usage Data Processing
was enabled. I clicked on "Run Now" on these job schedules.
CA >> Search Service Application >>
Under Mange Content Sources page
the status was Idle.
We have performed the full crawl a few days back.
PowerShell: Read the Brian
T. Jackett's blog. Basically, he uses PowerShell to trigger the Receivers
for the AnalyticsUsage and PageRequest
and enable these Receivers for Analytics and Page Requests. In the
production environment these receivers were already defined and I just executed them again. Ran the
OWSTimer service for all SharePoint servers. However, after 2 days no data was shown.
The only thing we have not checked is WSS_Logging database.
We are stuck in this issue and its OOTB feature.
Any pointers for this issue will be highly appreciated.
Thanks in advance.
Regards,
Aroh
Aroh Shukla

Hi Aroh,
Please refer to the article:
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VNcSsf4fqM8
There are still some place you could check for general troubleshooting steps, such as:
1.Did you configure AAM recently that might affect this?
2.Does related timer jobs run successfully?
Regards,
Rebecca Tu
TechNet Community Support

CRM 2007 Interactive OLTP Reports - Showing No Data

Similar Messages

Maybe you are looking for