CRM 7.0 Activities Not passing to BW

Hello All,
I need some help, we upgrade from CRM 4.0 to CRM 7.0 SP 5. With CRM 7.0 we began to use the "Iinteraction record" and we have a problem passing main activities (claims, Sales etc) to BW.
The problem is that all activities created with an interaction record doesent pass to BW. We are using extractor 0CRM_SALES_ACT_1.
We try creating an activity out of an interaction record and it pass without problem to BW.
Any help would be wellcome! best regards!

Hi Jose Luis,
It´s an old post but did you solve this problem?
Thanks,
Pablo.

Similar Messages

While Acquastion of Asset f-90 Deprication entry was not passed

While Acquastion of Asset f-90 Deprication entry was not passed only Asset and party A/c passed what is problem and we set the deprication. please solve this question

dear
while acquisition we dont pass any depreciation entry. we set the capitalization date as depreciation start date if you want to start dep from the same date .this is the date from which the system will start calculating depreciation for asset. posting dep will take place during moth end or year end activities. we mauintain account determination in AO90 which allow the automatic entries to pass during AFAB.
regards
rohit

Modify Form in the "Posts-Activities-Notes"

Hello,
Our user would like to modify to add more field into the Phone Call form that we can access from the "Posts-Activities-Notes" tab. I have not yet found a way to do this.
Is this possible?
Appreciate your suggestion.
Thanks,
-tri

Hello,
Unfortunately that dorm is not customizable.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

Captivate 6 Text Entry Events Do Not Pass

I am a long-time user of Captivate going back to version 2. I've created a simulation course with numerous text entry events that do not validate correctly. I am typically using the TAB key to validate the text entered. I have several lessons where everything works fine, but many that have problems.
Typically when TAB is used at the end of a key press, you will see focus shift to the first button on the Play bar - and this does not cause any problems. I see this behavior on the events in my course that work. However, for the ones that do not work, I see the focus shifting to the Address Bar and the event will not pass.
The only workaround I have employed is to use On Focus Lost: Go to Next. This is not a great solution because the text no longer validates with this setting. These events will pass no matter what is entered.
I would really appreciate your help with this! My course is due soon. I would be happy to provide more information or upload my file for your inspection. Thank you!

For anyone who might be experiencing the same problem and looking for an answer - this is still 100% broken in Captivate version 6. None of the fixes discussed in the above referenced thread work. I tried playbar widgets, editing the playbars in Flash. No luck.
Adobe just moves forward from version to version not fixing the bugs they create in prior versions. That's your incentive to upgrade, folks.
Best workaround I can offer is Use ENTER as your validation keystroke. It doesn't have the same problems associated with TAB. Good luck!

Credit Card number entered CRM sales order is not appearing in R3 Sales ord

Hi,
We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
Appreciate your help on this.
Regards
Mohammed Roshan

Hi All,
Looking forward to your valuable inputs on this as to how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
Regards
Mohammed Roshan

Scheduling Agreement -Schedule line should not pass the requirement to MRP

Hi Friends!
As we all know the scheduling agreements is outline agreement with future schedule lines, with this system will pass the requirements to MRP for the schedule line which is even after 5 years, so my requirement is if the schedule line date is above 15 days from the current date then requirement should not pass to MRP.
solution which we gave is, SA initially will determine the schedule line category as CN (which will not transfer the requirement) and a batch job program will run daily and it will check for each schedule line if any of the schedule is with in the 15 days from the current date then it will change the schedule line category from CN to CP.
Now the problem is , by using Batch Job which program I have to call to change the schedule line category?????
1. we tried BAPI_SALESORDER_CHANGE but when we are changing the CN to CP it is not performing ATP where as if we do manually it is performing.
2. we tried BDC but here also we facing some strange problem i.e. while recording the ATP screen is not populating where it is coming while doing manual.
Can someone let me know which one program we should call in Batch job to do this change.
Regards
Nath

Hi nath,
i also failed in changing shedule line category in userexit and in BAPI.
in one case, i succeded in doing it with a bdc after MV45AFZZ / userexit_save just bevore the datas are reset but after the commit-work is processed.
the other possibility is, to change the accepted amount in userexit RV03VFZZ / USEREXIT_AVAILABILITY_OUT.
3. possibility is, to block the order with a delivery - block , same as the credit-control-block. This block can be set in MV45AFZZ or perhaps in BAPI too.
hans

Dashboard prompt value is not passing into the report

Hi,
I am using OBIEE 10g. The problem is in Oracle BI Answers
I have a prompt and its related report. In the prompt, in one of the column, I am using sql result. The sql query is a co-related sub query where i have used 2 tables. employee_data and employee_region. The reason for using sub-query is that there is no data_center column in the employee_data table. It has the records for all the data_center e.g USA, UK,IND,AUSTRALIA etc So, I used the sub query with condition which will give the result on a particular data center (here it is USA) and this sub query's output is input for the main query. And the prompts works fine and gives correct result
The sql query used for the column in the prompt (in Oracle BI Answers) as
SELECT EMPLOYEE_DATA.ENAME FROM EMPLOYEE WHERE EMPLOYEE_DATA.ENAME IN (SELECT EMPLOYEE_REGION.ENAME FROM EMPLOYEE WHERE EMPLOYEE_REGION.DATA_CENTER = 'USA')Now in the report, there are 2 coulmns. - EMPLOYEE_DATA.ENAME and EMPLOYEE_REGION.DATA_CENTER
I have used the main column EMPLOYEE_DATA.ENAME for filter as 'prompted'.
The problem is the value from the prompt is not passing from the prompt to the report, what I found. Because, instead of showing the result for 'USA' data_center, It also shows other data_center 's (UK,IND,AUSTRALIA) data.
How filter condition I should use for EMPLOYEE_DATA.ENAME column in the report so that the prompt value will pass to the report properly ?
Thanks
Edited by: Kuldip on Feb 21, 2013 6:17 AM

Hi Kuldip,
There are 2 ways of doing it.
1. Nice and good: For the section where the report is put have a condition to display only if it returns rows. For details please refer to :
http://bischool.wordpress.com/category/guided-navigation/
2. The easy way: Add a "No Result" view to your report and add few spaces in the text.
Let me know if this helped.
Regards,
Jay

Filters 'OR' function not passing the values to the sql

Hi,
I am facing an issue with the 'OR' function on the filters that are used in the reports.
The report needs to fetch all the records on the three tables as the user enters the value in the dashboard prompts.
eg: [   update_dt_A1 is prompted
and user_name_A1 is prompted ]
or
[    update_dt_B1 is prompted
and user_name_B1 is prompted ]
or
[    update_dt_C1 is prompted
and user_name_C1 is prompted ]
The values entered in the dashboard prompt gets passed to the filter, but the vaules are not passed over to the SQL that runs on the database, hence the reports shows all values and does not reflect the values entered.
When the 'OR' function is replaced with 'AND' the values get passed to the SQL.
Can anyone help on what is the issue on the filters?
Thanks

Here is how my Filters are set up
Vendor Name is Prompted
AND
Vendor Number is Prompted
AND
[   [Last_update_date_Vendor is prompted
AND
User_name_Vendor is prompted]
OR
[Last_update_date_Site is prompted
    AND
    User_name_Site is prompted]
OR
[Last_update_date_Bank is prompted
    AND
    User_name_Bank is prompted]
The values from the dashboard prompts gets passed to the filter, but the sql that runs does not take the values in the where clause.

While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

Here is my problem and here is the solution!!!
My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks.
AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds.
Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me.
Cлава Україні!!! Героям слава!!!

I thought this was the method I used before but I followed through it and it was a horrific fail. "Operating system not found". Can anyone help?
http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
Steps To Achieve Victory
Download the ISO you want to use
Open Terminal (in /Applications/Utilities)
Convert .iso to .img using hdiutil:
hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
Rename if OS X gave it a .dmg ending:
mv /path/to/target.img.dmg path/to/target.img
Type diskutil to get a list of currently connected devices
Insert USB drive you want to use
Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
Run diskutil eject /dev/diskN and remove your USB stick
The USB stick will now be ready to use
Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

When using pop up editor windows on a Joomla 1.0.15 website the URLs selected in the pop-up are not passed back to the main window

The Joomla content management system version 1.0.15 provides a content editor which uses pop-up windows to select images and files. When using any of these pop up editor windows since 3.6.9 the URLs selected in the pop-up are not passed back to the main editor window.
Up until FF 3.6.8 there were no problems, but FF 3.6.9 and 3.6.10 both exhibit this same problem, as does FF 4 Beta 6. (Support Question raised on this forum in early September when 2.6.9 was released but no response)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Changes made to the order in SAP CRM 7.0 is not transferring into ECC6.0

Hi SAP CRM Experts,
Could you please provide me the solution for the below concern?
When the changes are made in SAP CRM order ,the synchronization is not taking place i.e., those changes are not replicating into ECC6.0 and the other way round is working fine(from ECC6.0 to CRM)The order is not editable in CRM and giving the message as "Document is being distributed; changes are not possible" and BDOC status as " After qRFC step (intermediate state)" and in the in bound queue (SMQ1) and it is showing as "running" after a while it is clearing but the BDOC and the orders messages are still the same.
Would appreciate for the quick solution.
Best Regards
Succhi

Hi, Succhi
Note 1621031 - Incorrect status I1054 "To be distributed"
Note 1620893 - Screen output without connection to user - SMQ1
also check program CRM_DATAEXCHANGE_TOOLBOX
Denis

Cancel Credit Memo Not passed to Accounting

Hi, All
My client have a Issue there raised Credit memo request with reference to billing document later there convert into Credit Memo, later there found amount there given is wrong credit memo request, there cancel credit memo the problem is that system not generate any accounting document Due to the Number range Issue and we fix the issue ( Same Series of number ranges RV and accounting ) previous it was the other Series of number ranges
The problem is Cancellation of credit memo not passed to accounting and credit memo already passed to accounting
Can we delete Billing document not passed to Accounting So i can again Cancel the Credit memo
it very urgentt
Thanks
Rajesh

Hi,
to cance a cancellation document, check note 388489.
But the status of the original document won't change thus you cannot cancel it again. The solution is creating a debit memo.
Balazs

CRM sales order is not saved in CRM but in ECC

Hi,
I am new CRM area and will not some hints on where to check.
When the the Sales orders are successfully created in CRM, they are replicated to R/3 but the sales orders are not saved in CRMD_ORDERADM_H table of the CRM system.
Also, I dont know see any details of the sales order in the interaction record document flow.
Can you please help me with any hints on where to check to fix this issue..

Hi Sangameshwar,
In CRM you can have two scenarios for ERP Sales Order.
1. ERP Sales offer and Sales order, using the CRM User Interface to create directly the ERP Sales Documents with LORD interface. The document is only saved in ERP. I believe this the scenario you are using.
2. CRM Sales offer and Sales order, the document is saved both CRM and ERP. The documents are replicated via Middleware.
In both scenarios the interaction record should add the document in the doc. flow, it's probably a missing customizing in the interaction record.
Hope this information help you.
Regards,
Jorge G.

MacBook will not boot (does not pass apple gearwheel stage)

After experiencing a freeze on my computer (couldn't access even force quit to unfreeze), I hard shut down my computer. When trying o restart, it would not pass the apple and gearwheel page, eventually the apple turned to a circle with the slash through, I think means the system will not load? I have inserted the osx DVD ( snow leopard, this system is about 2 years old) and performed disk utility to check that the hard drive is not faulty. I repaired the disk since it said there were issues (minor I think since it took very little time to repair, 7 minutes about ). Still, the issue of not loading persists. A additional problem now is that I cannot eject the osx DVD, now the computer will always boot to this DVD. Could this be am issue with another hardware component? For a while I have had a battery warning, but since the battery did not seem to be in trouble, and the MacBook continued to be useable I ignored the warning, and it had been warning me for white some time without any obvious problem. Could this be the problem now? The computer seems only to boot to the disc when it is connected to the power source.

You shouldn't have waited until now to back up. You'll lose all your files eventually if you don't. Before you do anything else, get hold of an external hard drive that you can use for backup. While booted from the DVD, but before reinstalling, select Utilities > Disk Utility from the menu bar and make a backup according to the instructions linked below. If all goes well, you won't need it. After you're back up and running, set up a permanent backup solution using Time Machine.
Mac OS X v10.5, v10.6: How to back up and restore your files

CRM 7.0 Activities Not passing to BW

Similar Messages

Maybe you are looking for