CRM 7.0 EHP3 Installation Export CD problem

Dear all,
we are installing SAP CRM 7.0 EHP3 on MSSQL 2012.
We do encounter a problem with the installation Export CD.
SWPM is SWPM10SP05_2-20009707.SAR - SP5 PL 2, Kernel is 741 (Material Number: 51048107_8).
Installation Export Material Number are respectively 51047869_2 and 51047869_3.
When asked for Installation Export CD, we input the right path, but SWPM tells us that he is expecting another CD:
You entered: E:\CD SAP\EXPORT\DATA_UNITS\EXP1 Found the label SAP:CRM:SR170EHP3:EXPORT(1/4):SAP CRM 700 EHP 3 SR1 Installation Export CD 1/4:CDxxxxxxx_1 but need the label SAP:CRM:70EHP3:EXPORT(1/4):*:*
It seems that he asks for an older version of the Export CD.
Has anyone already had this issue and can advice how to solve it?
Thanks in advance.
Kind regards,
Andrea Visentin

Dear all,
ok, I'll answer myself:
as per note 1998693 - Sapinst Error: Found the label SAP:UT:SR1740:SP05:*:* but need the label SAP:UT:740 for a similar "issue" we had installing Process Integration today, we have just realized that there is a specific section in SWPM for SR1:
sorry for having bothered you with such a silly question :-)
Kind regards,
PS: changing LABEL.ASC CD-Label to non-SR1 package, works.
Andrea Visentin

Similar Messages

  • Solaris installation related questions/problems

    I've recently purchased Sun's Solaris 8 OE media kit 2/02.
    I tried installing them on two computers and experienced the following problems:
    On my Pentium 3, I get the following messages when during the first steps of installation:
    Determining bus types and gathering hardware configuration data...
    Warning:Resource Conflict - both devices are added
    NON-ACPI device: PNP0C01
    Memory: 9FC00-9FFFF, FFE0000-FFF7FFF,FFF8000-FFFFFFFF,
    FFC0000-FFDFFFF,FFF00000-FFFFFFFF
    ACPI device: PNP0C01
    Memory: 9FC00-9FFFF,E0000-EFFFF,40FFC00-FFFFFFF
    Warning: Resource Conflict - both devices are added
    NON-ACPI device: ISY0050
    Port: 3F0-3F5,3F7,IRQ:6;DMA:2
    ACPI device: ISY0050
    Port: 3F0-3F1,3F2-3F3,3F4-3F5;IRQ:6;6JDMA:2
    Most surprisingly, the installation worked!!!
    However, if anyone understands what the above means, its implications or other important information, I'd like to hear it and its workarounds if any.
    On my newly purchased Pentium 4, I had to first remove my Ethernet card to prevent system boots during installation. My problem is that I have some hardware conflicts.
    I have a "15 LCD monitor from LG.
    Display adapters: ASUS vn179 DDR v28.32
    GeForce 4 MX 440 64 MB BV17 Internal (MV)
    I think that these two are causing the problem.
    As a result, I cannot install Solaris with the windowing system.
    I cannot see these types when choosing hardware devices.
    Please advise on this matter.
    I tried choosing some other hardware from the configuration list but the installation halted.
    Am I doomed with this computer not having Solaris on it?
    Last is a matter of Solaris residing on a single harddisk with other OS.
    I want to have Solaris, Redhat Linux 7.3 and Windows XP Professional.
    In what order should I install the OSs?
    Is it recommended to make partitions before any of the above installations take place?
    Which OS should go into each partition if it makes a difference?
    P.S.
    I'm a total newbie to Solaris and plan doing some Java programming on it.
    So using a GUI is absolutely essential to me.

    Hi TH,
    You can install UPK server with WS 2008 R2 SP1 without any issues(may it be standard or enterprise edn.). Oracle database 11.2.0.4 can be used as well.
    You can refer the installation guide for version 12.1 incase you have any queries.
    You would only need to open the database port(eg 1527) or so on the subject server. There are no other specific port opening requirement on the firewall (port 80 must be open as well, but mostly it is not blocked on servers).
    Let us know if you have any further queries or if you have any issues.
    regards,
    SD

  • CRM 2007 Business package installation

    Hi all,
    I am working on CRM 2007- EP7.0 integration. Can anyone please provide me the steps for CRM 2007 business package installation.
    Please help!!!! Points will surely be given for your help.

    Hi Shweta,
    Explore following link of Service marketplace to download the master guide;
    https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=
    01100035870000659894&_OBJECT=011000358700005412792005E
    Furthermore you can explore in help.sap.com>SAP Business suite>Customer relationship management>Download installation guide of CRM 2007(6.0).
    Regards,
    Priyadarshan

  • Installation Export DVD

    Hi all,
    Is Installation Export and and Upgrade Export in SAP Software Download Center OS-independent?
    Can i use Solution Manager Installation Export x86_64 Linux to install SolMan under HP-UX, for example?
    In Download Basket it has same number.
    Thanks and Best Regards

    Hi,
    ///  Is Installation Export and and Upgrade Export in SAP Software Download Center OS-independent?
    Can i use Solution Manager Installation Export x86_64 Linux to install SolMan under HP-UX, for example?
    In Download Basket it has same number. //
    Ans: Installation export and upgrade export is DB and SAP solution specific.
            Yes , you can user solman installation export x_86_64 to install solman under HP-UX. Ensure that you are using appropriate
            Installation master and kernel DVDs which are specific to HPUX.
    Hope this answers your query.
    Regards,
    Deepak Kori

  • Rescheduling functionality in CRM 7.0 EHP3

    Can anyone help us more on how to configure the rescheduling functionality for Preview calls in CRM 7.0 EHP3.

    Hello Rajbans.
    If it's still relevant. What sort of configuration do you need?
    I've covered SAP CRM and SAP BCM scenario in my document: Call List integration in details. SAP CRM and SAP BCM.

  • Installer/Software Update problems

    I am having problems with installing or updating some software. When I try to start the installer, it acts as though it is going to work: the icons in the dock move to make room for another icon but then move right back and close the gap. The installer never runs long enough to generate or change the display. This has happened with three different software packages: iMacEFIUpdate1.3; Kodak EasyShare v 6.0.2; and Parallels-Desktop-5582-Mac-en-ND.
    I talked to Kodak about the problem. All they wanted to do at first was help me download the installer. After I convinced them I had a good download, they sent me a CD containing the software. Same result - no installation.
    The problem with the iMacEFIUpdate1.3 happened today. It was part of a group of six updates and I was not at the computer while the updates were being downloaded and installed.
    Other software updates and installations have worked with no problems.
    I have repaired permissions, but did not start from the installation disk. Could this be the problem?
    I am at a loss as to what to try next. Does anyone have a solution?

    Easyshare 6.0.2 when downloaded from Kodak is a standalone installer Application, not an installer package ....it can't be opened directly by "Installer" but should simply run on its own when double-clicked. I imagine that the Kodak supplied CD version is exactly the same.....
    ctrl-click on the easyshare installer, choose 'get info' , in the 'Kind' section it will likely say "Application - Universal" If so, then that explains why 1: Installer won't open it, and 2: why there's no 'open with' dialogue for it.
    The previous system should be ( just as your Console message said...) in HD/Previous Systems.localized/Previous System 1/ It's not normally invisible.
    http://docs.info.apple.com/article.html?artnum=107120 explains how the Archive and Install works, I don't know offhand why some people get Previous Systems.localized rather than plain 'Previous Systems' but it doesn't seem uncommon.
    Apple say "Don't install older versions of Mac OS than what comes with your computer" so I wonder if that might cause you problems later? Certainly something seems off here ( the default application for anything shouldn't be pointing at something in the Previous System )
    Anyway, assuming you're gonna soldier on for now with Tiger on a Leopard-shipped Mac.... I guess that leaves the Easyshare installer not working? If you've double-clicked the Easyshare installer, it bounced in the Dock, and nothing more happened; there might be something in the Console log explaining why.... or a crash log for it in /Users/BigBob/Library/Logs/CrashReporter/
    try the Easyshare installer app again - & look at the console log for clues while you do it.

  • Solution Manager project - no roadmap available for CRM 7.0 EhP3

    Hi all,
    I'm setting up a new project in solution manager for an upgrade.
    However, in my roadmap selection tab, there's no roadmap for CRM 7.0 EhP3 (or even EhP2).
    Is this just not available or can/should I update this list?
    Many thanks and with kind regards,
    Yee-Tee

    Hello,
    There are two possibilities I see here.
    1-Your roadmap list is not up-to-date.
    2-There is no roadmaps for these specific product/version delivered for the solman.
    I would recommend you to first check the ST-ICO package SP level. The whole documentation content (Roadmaps, BPR, templates,...) are delivered by this component, so in order to have the complete and must up-to-date list, you'll need the latest SP-level.
    further info: Implement SAP | SAP Support Portal
    I hope this helps.
    best regards,
    Fabricius

  • Wenn ich auf meinem winxp itunes 10.5 installieren will kommt folgendes:  Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich

    wenn ich auf meinem winxp itunes 10.5 installieren will kommt folgendes:
    Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich an das supportpersonal oder den hersteller des paketes.
    Kann jemand helfen ???

    Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich an das supportpersonal oder den hersteller des paketes.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Fehlermeldung bei Installation von ITunes: Es liegt ein dieses Windows-Installer-Paket betreffendes Problem vor.

    Ich kann ITunes nicht installieren. Immer kommt diese Meldung:
    Es liegt ein dieses Windows-Installer-Paket betreffendes Problem vor. Ein benötigtes programm fehlt. Bitte wenden sie sich an den Support oder den Paket-Hersteller.
    Dann bricht das ganze ab.
    Ich habe bereits meine Windows-Updates alle geladen, das ganze als Admin durchgeführt, habe quick-Time neu installiert...nichts hilft.
    Kann mir jemand helfen?

    Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich an das supportpersonal oder den hersteller des paketes.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • CRM Mobile Client Installation on MSDE Problem

    Hi All,
    We have installed CRM Mobile 4.0 SP06 on MSDE.
    When i try to assign a site through the Client Console, i get the following error.
    <b>Error:</b> Login information for IDES database not found.
    <b>Source:</b> Check Site details
    <b>Reason:</b> [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ides'. Reason: Not associated with a trusted SQL Server connection.
    <b>Suggestions:</b>
    Check if MSA is installed.
    Check Transaction Layer registry entries.
    Check if ODBC settings for IDES is proper.Test Data Source.
    Check user and password used in IDES is same as in registry entries.
    Check if user database(IDES) password is valid in the registry.
    Pl let me know what is wrong.
    Thanks in Advance,
    Yatin

    In Start --> Run, write odbcad32. This will bring up odbc connection details. Go to System DSN tab. You should see an entry for IDES.
    If you don't, installation was not complete.
    If you see the entry, double-click it. Press NEXT on first screen. On second screen, select second option (logon with SQL server authentication), put username & password as ides & ides. Then press NEXT. Press NEXT on third screen as well. On fourth screen press FINISH. This will bring you to fifth screen. Press Test Data Source button. If IDES database is installed properly, you should receive a message - TESTS COMPLETED SUCCESSFULLY.
    Hope this helps.
    Regards,
    Kaushal

  • CRM 7.0 IPC installation folder

    Hi Experts,
    We are facing the problem in CRM 7.0 here.
    Firstly, our CRM is integrated with ECC6.0, and the pricing will be maintained in ECC only then download to CRM. In the ECC pricing procedure, standard routines and 900 customized routine is used which can't transport to CRM. As demonstrated in SAP help, also not all standard ECC routine is available in CRM, we need to check the mapping in file "CRMStandardExits.java.txt" in the subdirectory "lib\userexits" of the IPC installation.
    For my understanding is for CRM 7.0, IPC is already installed, and it will be activated via the VMC activation. But I can't find any file or folder in our CRM server regarding the IPC installation. Can any one let me know, where the folder is, or what I did wrong for install a IPC?
    Rgs, Michelle

    Hi Michelle,
    the file you are referring to is outdated and is only available for IPC release 4.0 and earlier. For the new user exit concept for applying user exits on the VMC you might want to chech the user exit implementation guide attached to SAP note 809820. This guide contains also examples for custom user exit implementations.
    Best Regards,
    Michael

  • The user name or password is incorrect in the CRM system checks during installation

    Hi everyone
    I'm installing CRM 2013 on 2 servers (server 2012) - CRM Full server + SQL Server 2012.
    I created 2 service accounts for this - CRMSVC + CRMSANDBOX (one for sandbox and another one for all the rest).
    I'm getting the following error in the system checks during setup:
    I've verified a billion times that the service accounts and passwords are valid - I even tried using different service accounts - same problem. As for now I also added the service accounts to the local admins groups just to be sure that it's not some permissions
    issue (I also added them to the 'log on as service' & performance logs groups). 
    If i try to use NETWORK SERVICES instead of a service account - the installation goes through flawlessly - no issues at all.
    I'm also gonna say that i tried another installation on a fresh server - SAME ISSUE.
    So for now my ideas are either it's a GPO somehow blocking the service accounts - or some kind of other security issue.
    I also found out that the security event log shows these two errors when these show up in the system checks:
    Inside i found 'NULL SID' entry - it does not recognize the service accounts account and 0xC0000064 in the Sub
    Status Codes
    It's not a typo issue so don't bother - if i write a wrong password in purpose - it actually says that the password i typed for domain\service account is incorrect - here it seems that the service account is not being recognized.
    Any ideas anyone?
    Thanks
    Please vote if you find my post helpful - Thanks

    Not sure you understood my point.
    The installation process necessarily runs under the account of the installing user. The installation will query AD to identify information about the service accounts, and will add them to the relevant CRM AD groups. It is possible that the installing user
    account does not have sufficient privileges on the AD objects for the service accounts to be able to identify them, and to add them to groups. This scenario is consistent with the errors that you get, and also with being able to install CRM to run under NetworkServices
    (which doesn't have its own AD object)
    Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk
    Hi David
    I understand this, but as far as i know running it under NETWORK SERVICES will add the machine names to the OU security groups - hence the user installing still needs to have delegated permissions on that OU. Anyway as mentioned above - ignoring the checks
    and running the installation solved this and also added the accounts to the security groups - so this whole mess looks like some bug to me - not sure i will ever find out what it was :)
    Please vote if you find my post helpful - Thanks

  • CRM 2011& Office 2013 Excel Export

    Hi Forum,
    we are currently using a crm 2011 server (ru17) and have some clients with Windows 8.1 and Office 2013 with outlook addin (RU 17). For these clients we get in to trouble by exporting contacts or accounts as dynamic pivot spreadsheet.
    If the download window pop up, you can not directly open the file (instead with office 2010 it is possible). If you chose save (it is a xml file), you have to right click that file and chose excel. After Excel started you can't see the pivot.
    We tried to solve the issue with the following hotfix(without any luck): http://support.microsoft.com/kb/2883063/EN-US
    Maybe some has another idea how we can solve the problem ?

    You can use a custom timer job in SharePoint 2013 to be scheduled to run. This job could interact with your CRM system to import the entities to a folder or List in SharePoint. Andrew has a link here:
    http://www.andrewconnell.com/Creating-Custom-SharePoint-Timer-Jobs
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • Adobe Export pdf Problems

    I have subscribed to Adobe pdf export on my Ipad air; have recieved a confirmation e-mail but am asked to subcribe again when I try and export? Please help

    Thank you for the answer, I got it!
    Dionyzio
    De: Mylenium [email protected]
    Enviada em: quarta-feira, 12 de setembro de 2012 11:45
    Para: [email protected]
    Assunto: Problems to download adobe export PDF
    Re: Problems to download adobe export PDF
    created by Mylenium <http://forums.adobe.com/people/Mylenium>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/4693037#4693037

  • Solaris 8 Installation on Intel - PROBLEM

    Hi,
    I am trying to load Solaris 8 on Intel machine , 810 motherboard , 128MB SDRAM , 20GB HDD
    but whenever I try to load with CD-1 I have a problem like Webstart Installation 3.00 start and when he ask me language , after that message comes no hardisk foung and it stop immediately at # prompt.
    Whenevr I start with CD-2 , he ask me for Interactive / Jump Start , I choose Interactive , it start laoding KERNAL and machine automatically reboot , again reinstall , at that same point machine reboot.
    Tell me what to do , I cant go ahead , I want to load Solaris 8 , and see ..
    HELP MEEEEEEEEEEEEE.
    Regards,
    Mahen.

    I think the problem source is the BIOS ACPI Power Manager, many of motherboards ACPI always let the system auto-reboot during loaded the OS kernel.
    I had tried to install Windows2000 and Solaris8 10/01 on Intel 810 MB, the system always rebooted again and again, I suppose that may be some bugs on 810 chipset !!
    Try to reconfigure the BIOS ACPI function, such disable it.
    But, I'm not sure that is work for your case.....

Maybe you are looking for