CRM 7.0 Repair Order: goods receipt against order stock

Hi gurús,
We are implementing CRM 7.0 Service and one of our business processes is Repair Order. We have done almost all customizing following Note 806768.
We have our repair orders replicated in ERP, where logistics processes take place without problems as far as we do not set special stock indicator to order stock at level item, therefore receiving and issuing products to be repaired into unrestricted stock. Processes are correctly updated in CRM.
The problem comes when we try to use order stock, as mentioned in SAP Help. Return to repair enters into unrestricted stock, even though it is supposed to entry order stock, with movement 653-E (Schedule categ. IR). When we try to deliver repaired product, movement 601-E (Schedule categ. IA), we are getting errors, since there is no order stock, and return and deliver are managed with two different item positions.
I suppose this is a logistics issue, not a CRM problem, but I would like any advice in case anybody has already dealt with it.
thanks in advance and take care.
Pablo

What resolution did you get for this issue? Did you do an enhancement?

Similar Messages

  • Reg.MB1C,Goods receipt against Order

    Dear All
    In Tcode MB1C - there are four tabs named 1. New item.2.To reservation.3.To order.4.W/M Parameters.
    We want to receipt stock against Order using option 3.To order.
    What is the procedures.
    Pls help.
    Thanks
    Rajakumar.K

    Hi
    First Create a Production Order.
    Goto MB1C, Click on the Icon To ORder, enter the Order Number & Continue, The movment type Plant will be slected from the Order, enter the Storage Location & save the GR.
    Thanks & Regards
    Kishore

  • Tables For Linking Order Confirmation & Goods Receipt against Order

    Hi,
    We are using transaction CO11N (multiple times) with Auto GR feature. So, for every confirmation, a
    material document for corresponding goods movement also is created.
    Similarly for multiple confirmations, Mat Docs are created.
    I am looking for tables where I can get a link between Order Confirmation counters & respective Mat Document.
    I tried Tables AFRU and AUFM but it gives Mat. Document Number When only one GRis carried.
    Anyone Plz guide.
    regards

    To Dear ,
    This is the tables that used in production orders
                         AUFK                    Production order headers
         AFIH                    Maintenance order header
         AUFM                    Goods movement for prod. order
         AFKO                    Order header data PP orders
         AFPO                    Order item
         RESB                    Order componenten     
           AFVC                    Order operations
         AFVV                    Quantities/dates/values in the operation
         AFVU                    User fields of the operation
         AFFL                    Work order sequence
         AFFH                    PRT assignment data for the work order(routing)
         JSTO                    Status profile
    You can check here & I think AUFM ,AFVC ,AFFL may you will get trquire data .
    Pleasse check & revrt me back .
    Regards
    SANIL

  • MIGO - Goods Receipt against Purchase order. PO rate dispaly.

    Is it possible to display purchase order line item rate in MIGO - Goods Receipt against purchase order - Quantity tab.
    In Quantity tab - System is showing Qty in Unit of Entry, Qty in SKU, Qty in Delivery Note, Quantity Ordered, alongwith these fields we also want display of Purchase order rate/each of that line item.
    Please guide.

    BTW you are getting PO number at MIGO and clicking over that you will get entire PO then why you want PO rate display here??

  • Auto goods receipt against production order

    is it possible to do auto goods receipt against production order of (material with serial number)
    if not please suggest me solution
    please also tell me possibility of enchancement
    for goods receipt against production order
    sunil

    Hi
    If you check mark the auto goods receipt in the control key used in the work center used in the routing then you can have auto goods receipts posted for the production order against a confirmation.
    Rathnakar

  • Goods receipt against process order with inbound idoc

    Hi Experts,
    We need to post good receipt against process order with movement type 101 and for By-product 531.
    Can we use inbound idoc-WMMBID02,with message type WMMBXY to achieve this functionality?
    Or please advise if we can achieve this  from any other Idoc type.
    We are getting below field values for external system
    1. process order number
    2.plant
    3.material
    4.quantity in unit of entry
    5.unit of measure
    6.storage location
    7. movement type
    8.Batch
    Kindly advise how can we achieve this.
    Best Regards
    CS

    261 and 262 are two different movement types INDEPENDENT of each other. I definitely know for the fact that SAP allows you to create a 262 without a 261. if you were to restrict it... you can disable access through a tcode for that mov. type 262 and ask users to use MBST to cancel any material documents created via 261 movt type.. that would ensure a smooth process

  • Control on creation of inspection lot during goods receipt against process

    Dear Friends,
    When goods receipt against process order  of say quantity 100 Kg is done in PP, inspection lot for the same of origin 04 is created in QM.
    My requirement is that PP should be able to post 90 Kg in quality inspection and remaining 10 Kg should directly go to
    reserve sample without coming in Quality.
    Is it possible?
    I have tried by changing material master record in MM02 for inspection set up data. But it is not serving the purpose.
    Thanks in advance,
    Regards
    Vrish

    Hi,
    04 type of inspection is GR at the time of Production Order.
    Whenever you do the production order quantity, an inspection lot is created. It will be created for full quantity which you are confirming (i.e. 100 kg will be considered and not 90 kg).
    This material will be Quality Inspection.
    You have to do Result recording and give usage decision.
    While giving usage decision, you can allot 90 kgs to Unrestricted and 10 kgs can go as Sample what you desire.
    Hope this will solve your issue.
    Srini

  • Automated statistical goods receipt against inbound delivery

    Hi,
    We have set up a process that we get a DELVRY03/DESADV Idoc from our vendor to confirm the delivery to our customer. This DESADV Idc will create an inbound delivery and a statistical goods receipt will be posted.
    Now we have a new requirement, the vendor material has a serial number assigned. We get the serial number in segment E1EDL11 and it will be copied into the inbound delivery, unfortunately the statistical goods receipt will use transaction MB01 and it will post the statistical goods receipt against the purchase order details which did not contain the any serial number information.
    Is there any way to set up the automated goods receipt against the inbound delivery and not against the PO?
    Thank you,
    Frank

    Hi,
    Anybody out there who knows how to enable an automated goods receipt against an inbound delivery?
    Thank you,
    Frank

  • Rounding while goods receipt against outbound delivery

    Hi Experts,
    I have an issue regarding alternative unit of measure.
    Material with base unit of measure FT,ordered unit is Meters since the alternate unit of measure has conversion factor getting decimal places while goods receipt against outbound delevry.
    Is it possible to round off to nearest figure without decimals.At what level means PO,delivery,GR how we can round off.please advice with customization.
    Thank you very much for your help.
    Regards,
    Babu
    9930154536

    it is not possible to rounding of stock while  GR through customizaton settings.
    abap development is required to round off the stock.

  • Idoc Type for Goods Receipt against a PO

    Hi ,
    The Goods Recept is already done in my legacy system, So my interface updates the goods receipt in SAP based on goods receipt done in Legacy system.
    I receive following data:
    Plant
    Purchase Order Number
    Line Item
    Pack List Number
    Material Number
    Quantity
    Storage Location
    GM_CODE = '01'
    MVT_IND Movement indicator = 'B'
    So I want which Standard Idoc Type I can use for this.
    I reffered to Note 833603.
    In that
    1. WMMBXY (WMMBID01, WMMBID02) and
    2. MBGMCR (MBGMCR01, MBGMCR02) is mentioned.
    Which one I should Use, as this GR is done again PO so its mandatory for me to pass Purchase Order Number and line item.
    Plz guide me which IDOC type i shd choose.

    Hi,
    Use the message type WMMBXY, IDOC Type as WMMBID02 and the function module is L_IDOC_INPUT_WMMBXY (Process Code WMMB) to process the Goods Receipt against a PO.
    I have successfully used that in many projects till now.
    Please let me know if you have any queries.
    Thansk,
    Mahesh.

  • I/B EDI IDoC for Service Ent Sheet & Goods Receipt against PO SAP ECC 6.04

    Hi EDI Experts ,
    We Have ECC 6.04. We are planning to have  inbound  EDI IDoC for Goods Receipt against PO & Service Ent Sheet .
    1.For Goods Receipt against PO  I have identified below Message type:
    MBGMCR / MBGMCR03 - Used in SRM Confirmation IDOC from SRM & SUS
    WMMBXY/  WMMBID02- Messages Types - I remember used in last Project
    Can anyone please suggest/confirm me , exactly which is most used and most suitable ?
    2. For Service Ent Sheet  inbound posting I unable to find any IDoC and never heard same.
    ( I learnet that from SUS Service entry posted in ECC by eSOA with PI ( XML).... or in other cases it may created using some BAPi)
    What is exact fact ?  Is there  Service entry sheet can not pe posted by IDOC ?  If yes, how ? if now, what is the best options ?
    Thanks in advance.
    Regards
    NAP

    Hi ,
    In MM-SUS deployment,
    Until SRM 7.0 with ECC 6.04,  Service procurement using MM-SRV & SAP SUS, was not  provided. But,  as of “SRM 7.0, only in combination with ECC 6.04 ”,  SAP standardized the “Service Procurement” scenario along with Material Procurement  for MM-SUS deployment  and  so fully supported for Material & Services .
    Please refer the Note 868192 & 1269540 and Technical scenario matrix ( criterion 18) document for details.
    So for there is Enterprise Services ( eSOA) and not IDOC. Please see below messages for Services.
    Create Purchase Order
    PurchaseOrderERPRequest_Out_V
    Outbound
    Change Purchase Order
    PurchaseOrderERPRequest_Out_V1
    Outbound
    Receives Service Entry Sheet
    ServiceAcknowledgementERPCreateRequest_In
    Inbound
    Approve Service Entry Sheet-> Send Approval Note
    ServiceAcknowledgementERPConfirmation_Out
    Outbound

  • Fields mapping IDOC WMMBXY to post Goods Receipt against Inbound Delivery

    Hi Friends
    I am testing Goods Reciept against Inbound Delivery using Inbound IDOC.
    IDOC Type used WMMBXY  and Function Module :
    System is giving erorr message as "Document does not contain any items".
    Kindly let me know segment data mapping for above IDOC type
    Following data are passed to segments,
    E1MBXYH-BLDAT  Document date
    E1MBXYH-BUDAT Posting date
    E1MBXYH- XBLNR  .. in this field i am passing Inbound Delivery number
    E1MBXYH- TCODE  ...  MIGO
    E1MBXYI-BEAKZ   ...  B Goods Receipt against Purchase Order
    E1MBXYI-MATNR     material number
    E1MBXYI-WERKS     Plant
    E1MBXYI-BWART    Movement Type
    E1MBXYI-LIFNR         Vendor code
    E1MBXYI-KZBEW      B
    E1MBXYI-POSNR      Item number in delivery
    E1MBXYI-VBELN       Inbound Delivery number
        E1MBXYJ-VLIEF_AVIS            Inbound Delivery number
        E1MBXYJ-VBELP_AVIS           Item number in Inbound Delivery
        E1MBXYJ-WM_KZBEW            Movement indicator
    Raj

    Hello,
    Did you recieve any answer or find a solution? I encounter a similar issue.
    Thanks in advance,
    Génia.

  • HELP: "Goods receipt purch. order" is not allowed (ORD #######)

    hello sap mm gurus/friends,
    i would like to ask how do i go about resolving the error message:
    "Goods receipt purch. order" is not allowed (ORD #######)
    upon receiving the items in sap. The PO has an account assignment "F" (Order) against an internal order (ORD #######).
    i came upon similar threads, and it was suggested that i should add "RMWE" (Goods receipt for purch. order) to Permitted Business Transactions. how do i do this?
    thanks very much in advance.
    regards,
    albert

    Hello Kami,
    i was actually doing a goods receipt (MB01) against an invalid internal order. what i did was i requested the purchase requisitioner to choose a valid internal order that has been released and has not yet been fully consumed.
    i hope this helps. 
    Best Regards,
    Albert

  • Error in creation of purchase materials/Goods receipt against PO(FI-MM)

    Hi All,
    While processing FI - MM integration iam facing below errors,request to guide me with same
    1) While creation of purchase materials
    Valuation class 7920 not allowed for material type Raw material Message no. M3180
    Diagnosis
    The combination of values you have entered is not defined in the system.
    Procedure
    Check your entries, and choose a valid value or combination of values with F4.
    I have crossed checked in t code OMSK valuation class 7920 exists.
    2) Goods receipt against PO:
    Number range for trans./event type WE in year 2014 does not exist Message no. M7562
    Diagnosis
    The number range for document number assignment has not been maintained in the year 2014 for the transaction/event type WE.
    Procedure
    Contact your system administrator.
    in second case i have maintained number ranges in OBA7,OMBT,still iam facing with the same issue
    Regards
    Santosh

    Hi Dev,
    Thanks for your reply...yea i have done the ground work before posting this query
    but bitt confused with the post i have come across..
    Problem was occurring due to the wrong updating of raw material instead of finished goods in  MM01 (CREATION OF PURCHASE MM)
    however i have over come my 2nd issue,hopefull will over come my 1st issue also
    Thanks a lot
    Santosh 

  • Purchase Order Goods Receipt quantity tolerance setting not working.

    Team,
    We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
    The issue that I have is as follows:
    Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the  material master and also changed the message to a warning in OMCQ for message number M0722.
    I  had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
    I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
    I have searched for OSS notes, however they mention that there is no solution.
    Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
    Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
    Thanks

    Hello,
    Please check the Tolerance levels in O588 
    Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
    Best Regards,
    R.Brahmankar

Maybe you are looking for