CRM Extractor: Exception condition 'PROBLEM_WITH_QUERY'.
Hello all,
we have a problem when trying to execute a CRM extractor. This extractor is a copy of 0CRM_OPPT_H standard extractor. We have copied it with BWA1 transaction, add some new fields, and add two fields to the selection.
One of the fields is a date ( STATUS_SINCE ), when we execute the extractor with filter for STATUS_SINCE field empty, no problem, but if we enter a value to filter STATUS_SINCE, we get a dump.
Dump sais Exception condition 'PROBLEM_WITH_QUERY' , the information is the following:
The termination occurred in the ABAP program "CL_CRM_REPORT_ACC_OINDEX_JE
in "DOES_FIT_TO_QUERY".
The main program was "RSFHGEN2 ".
The termination occurred in line 54 of the source code of the (Include)
program "CL_CRM_REPORT_ACC_OINDEX_JEST=CM005"
of the source code of program "CL_CRM_REPORT_ACC_OINDEX_JEST=CM005" (when
calling the editor 540).
This only happens with this field, for the other field we have added to the extractor there is no problem, everything works fine.
Any help is appreciated.
Regards, Inma
Hi Inma,
Please see if OSS note 827332 (Exception-DOES_FIT_TO_QUERY in source system) helps you.
Similar Messages
-
Exception condition "PROBLEM_WITH_QUERY" raised.
Hi Experts,
I have a problem when I Appended a ibase field to service contract search page and enhanced the eh_onsearch_btn where I
added the code for searching the service contract based on ibase if i search the other than the ibase fields result is coming properly when I search provinding value to the search page it is giving below exception
The following error occurred in system : Exception condition "PROBLEM_WITH_QUERY" raised.
The error occurred on application server and in work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MAKE_INSTANCE_VALID of program CL_CRM_REPORT_ACCRULE=========CP
Method: MAKE_INSTANCE_VALID of program CL_CRM_REPORT_ACCRULE_ONEORDERCP
Method: GET_INSTANCE of program CL_CRM_REPORT_ACCRULE=========CP
Method: CREATE_ACCRULE of program CL_CRM_REPORT_QUESTION========CP
Method: CONSTRUCTOR of program CL_CRM_REPORT_QUESTION========CP
Function: CRM_BSP_OIC_1O_SEARCH_FROM_RF of program SAPLCRM_BSP_OIC_1O_SEARCH
Method: GET_RESULT_GUIDS of program CL_CRM_Q1O_SEARCH=============CP
Method: GET_RESULT_VALUES of program CL_CRM_Q1O_SEARCH=============CP
Method: IF_CRM_QUERY_RUNTIME_BTIL~GET_DYNAMIC_QUERY_RESULT of program CL_CRM_QSRVCON_RUN_BTIL=======CP
Method: EXECUTE_DYNAMIC_QUERY of program CL_CRM_INTLAY_BTIL============CP
Answer will be appreciated.
Thanks & Regards
Chetan Agali.Is this parameter also present on the Genil Component ? If you are actually trying to query also on this parameter then this parameter should be present on the Genil. Only appending the query input structure would not help here.
Regards
Kavindra -
CRM 5.2 : Authorization error : Exception condition "FAILED" raised.
Hi all,
I'm using CRM 5.2 and when we want to create a user (SU01) with a specific role such as SAP_CRM_UIU_SRV_PROFESSIONAL without any profil or any more role, the user can not acces to the Web GUI.
Here is the exception :
Note
Le message d'erreur suivant a été traité dans le système C52 : Exception condition "FAILED" raised.
L'erreur s'est produite sur le serveur d'application CRM52_C52_00 et dans le processus de travail 0 .
Le type d'interruption est le suivant : RABAX_STATE
La hiérarchie des appels ABAP est la suivante :
Method: GET_APPL_MODEL of program CL_BSP_WD_APPL_MODEL==========CP
Method: CONSTRUCTOR of program CL_BSP_DLC_VIEW_DESCRIPTOR====CP
Method: IF_BSP_DLC_CONFIGURATION~GET_PROPERTY_DESCRIPTOR of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: WD_VIEW_INITIALIZE of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: WD_INTERFACE_VIEW_INITIALIZE of program CL_BSP_WD_COMPONENT_USAGE=====CP
Method: BIND_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: WD_VIEW_INITIALIZE of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: BIND_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: WD_VIEW_INITIALIZE of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: BIND_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
After some reasearch, I've set the role SAP_ALL and SAP_NEW and all work fine, but I'm not agree to put all that tole to my users. Is their any other solution ?
Thanks.
Kind RegardsHi,
I had the same in CRM 6.0.
Look at note 1136402, correction 609218. Then you wont get a raise exception.
There are some technical authorisations in the role
SAP_CRM_UIU_FRAMEWORK. Assign this role as well.
You first need to assing your user role to an organisation. Then take the report CRMD_UI_ROLE_ASSIGN in SE38. Here you need to assign the role SAP_CRM_UIU_FRAMEWORK.
There is a description in the UI-framework customizing .
Hope it helps
Andreas -
Short Dump, Exception condition "NOT_EXIST" raised
Dear Colleagues!
I am having a problem with short dump, I am getting the message Exception condition "NOT_EXIST" raised.
I am trying to load data to ODS with full load and filtering via a DTP.
In the monitoring the load doesn't even get started.
I have already loaded data succesfully in this ODS... But now it doesn't work anymore..
I also tried to replicate and active all the rules and objects again.
And in the source system if I test the extractor it works fine.
I saw an earlier thread on this issue, and it recommended programs ZDMDELTAREPAIR or RSBDELTAREPAIR, but this thread was especially for BW 3.5. We are using 7.0 and have SP10. Are these programs still valid or is there another note for 7.0?
Hope you can help!
Regards Silje
Does anyone have any ideas?
regards, UrosHi again,
I tried RSBDELTAREPAIR and it worked!
Thanks to the forum again!
Silje -
Exception condition "CONFIG_NOT_FOUND" raised.
Hi,
I am trying to create an Opportunity in CRM 7.0 WEB UI. The moment i click on the create opportunity, i am getting a pop window, showing the transaction types which i have created in spro. But when i am selecting any one of them, i am getting a dump error mention in the subject matter.
I did ST22 & checked the notes on service marketplace based in the description, but could not find anything relevant to this error.
Here is, what i am getting the dump
Error when processing your request
What has happened?
The URL http://uapkb2dc.gep.ge.com:8028/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
The following error text was processed in the system CS1 : Exception condition "CONFIG_NOT_FOUND" raised.
The error occurred on the application server uapkb2dc_CS1_28 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: GET_XML of program CL_CHTMLB_CONFIG==============CP
Method: IF_BSP_ELEMENT~DO_AT_BEGINNING of program CL_CHTMLB_CONFIG==============CP
Method: ONLAYOUT of program CLO247JT6QHPYQHQ33T513E8SHV84CP
Method: %_ONLAYOUT of program CL_O247JT6QHPYQHQ33T513E8SHV84CP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Method: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Method: PROCESS_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
I am not able to find the solution on this & i would appreciate of someone can help me fixing this.
What i did is, I tried to add certain fields from "Configure Page Button" & added certain fields to right column. Since then, i am getting this error. I do not how to remove those.Hi,
Go to transaction BSP_WB_CMPWB and open the compoenent BT111H_OPPT.
Select the view you have modified and click on configuration tab. click on edit and select the custom config
you have created.either you can remove the entries you have added which caused the dump or if you are not sure delete the
custom configuration.This should fix the issue.
Thanks,
Rajiv. -
Hello Experts,
One of the CRM extractor fails during extraction with the below short dump. Every thing worked absolutely fine until now. Please advise on resolving this issue.
Short Dump Details:
Short text
Invalid partial field access: Length 0
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not caught in procedure "ZRSAX_BIW_GET_DATA_SIMPLE_2" "(FUNCTION)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is: In the executed program "SAPLZRSAX", the system attempted to access the field "TEMP_TDLINE_T" using the length 0. However, a partial field access with the length specification 0 is not allowed.
This extractor is based on RSAX_BIW_GET_DATA_SIMPLE_2 FM and worked fine without any issues previously.
Please advise.
Thanks!Sorry, but then something has changed in the data.
Perhaps a debug of the extractor using current data will help you to find the source.
One possible reason which comes to mind is, that someone changed the Customizing in the source system and a field is no longer mandatory.
But the reason is definitly in the source system, not in BI.
Kind regards,
Jürgen -
Exception condition CONFIG_NOT_FOUND raised in opportunity page
Hi Experts,
I am getting an exception in opportunity page as follows :
The following error text was processed in the system MCD : Exception condition "CONFIG_NOT_FOUND" raised.
The error occurred on the application server gsusapdp03_MCD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA of program
CL_BSP_DLC_CONFIGURATION2=====CP
I enhanced CRM opportunity component to include another view(Custom view).
I have created the role config key 'ZMKT_PRO' and created a new configuration with following
settings :
Role Key ZMKT_PRO
Component Usage <DEFAULT>
Object Type BT111_OPPT
Object Subtype ZOPS
Now when I use code like mentioned below, i get the exception when opening the page
<%
DATA:
lv_xml TYPE string.
lv_xml = controller->configuration_descr->get_config_data( ).
%>
<chtmlb:overviewFormConfig xml = "<%= lv_xml %>"
mode = "RUNTIME" />
What wrong am I doing here?Hi Ruby,
Thanks for your reply. "Do you have the default configuration maintained?".
Can you tell me which all default configurations need to be maintained?
My view is a simple blank view and I think I didnt check that checkbox which will
automatically create all the buttons. Is there any way to work around this problem as I have already
written a lot of code in this view. I also tried you code , but I had same exception. This exception is raised
by the same get_config_data( ) method. I debugged and found the source of exception at following point :
CALL METHOD cl_bsp_dlc_xml_storage2=>get_config_data
EXPORTING
iv_component = me->component
iv_viewname = me->viewname
iv_role_key = me->role_key
iv_component_usage = me->component_usage
iv_object_type = me->object_type
iv_object_sub_type = me->object_sub_type
iv_pers_only = iv_pers_only
IMPORTING
es_pers_data = ls_pers_data
es_config_data = ls_config_data
ev_config_data_origin = me->current_config_data_origin.
Values were :
ME->COMPONENT = ZCRM_XXXX
ME->VIEWNAME = z(viewname)
ME->ROLE_KEY = ZMKT_PRO(ZROLE KEY )
ME->COMPONENT_USAGE = CUBTOpptOverview
ME->OBJECT_TYPE = BT111_OPPT
ME->OBJECT_SUB_TYPE = ZOPS
Any solution?Thanks in advance.... -
SMQ2 - SYSFAIL - Exception condition "LOGSYS_FOR_GUID_CHANGED" rai - Active
Dear Experts,
Greetings!!.
In CRM SMQ2, ( inbound Queue ), I have a queue "R3AD_ZDNL_COND_A956" displays as a "sysfail" and have unlocked no change in statuses. I been still double clicked on the queue and displays as
"Exception condition "LOGSYS_FOR_GUID_CHANGED" rai"
How to activate this queue from sysfails status.
Regards,
SanyDear Rohit,
Thanks and Greetings!!!.
I have Checked both
Cl. Log.System
700 LOGSYS700 83ABE443CF1B475CE1000000AC16020D CRM
700 LOGSYS700 83ABE443CF1B475CE1000000AC16020D R/3
Both are Same, but still the queue is not able to active. If i Delete the entries what implication in CRM and R/3 please clarify me on the same.
Thanking you in anticipation.
Thanks and Warm Regards,
Sany. -
TREX Error : Exception condition "UNKNOWN FUNCTION" raised.
Hi All,
When i try to search for a product in the SAP CCM catalog, i am getting a dump "Exception condition "UNKNOWN FUNCTION" raised. ".
If anyone has faced similar error before, please help me resolve it.
Thanks
NishKelHi
Which TREX / CCM Version are you using ?
What is the detailed Dump message ? Please paste the details using ST22 Transaction.
<b>Other related SAP OSS Notes to check out -></b>
Note 969660 6.20/6.40 Patch Collection Installation : Unix
Note 1019227 DBM Package archivation
Note 1017750 DBM Order Archiving
Note 846657 TREX 6.1 XML attribute extractor doesn't work
Note 1006014 Lock of SINGLE_TABLE_INDEX
Note 932771 BIA: Change run, locks and initial indexing
Note 712341 ISA-R/3: No configuration possible when TREX is used
Note 733873 Publication of individual catalog items
Note 572940 Reduction of the number of index tables for area attributes
Do let me know.
Regards
- Atul -
Regarding Exception condition "CONFIG_NOT_FOUND" raised - while logging
Hi,
Could you please any one help me out.
When ever I login into the CRM Web UI with any of the Sales Manager Roles(SALESPRO or any ZRole that has been copied from SALESPRO) I get below error / exception:
The URL http://testinstsin1.sapcrmondemand.com:/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
The following error text was processed in the system TRG : Exception condition "CONFIG_NOT_FOUND" raised.
The error occurred on the application server SGPSAROU01_TRG_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: LOAD_CRITERIA_ADVANCED_SEARCH of program CL_CRM_CENTRAL_SEARCH=========CP
Method: LOAD of program CL_CRM_CENTRAL_SEARCH=========CP
Method: CONSTRUCTOR of program CL_CRM_CENTRAL_SEARCH=========CP
Method: GET_SEARCH_OBJECTS_AS_TABLE of program CL_CRM_CENTRAL_SEARCH=========CP
Method: DO_INIT of program CL_CRM_CNTR_LAUNCHER_IMPL=====CP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: CREATE_PAGE of program CL_BSP_PAGE_BASE==============CP
I am able to successfully login into the CRM WebUI with other roles. The problem is only with SALESPRO and ZRoles copied from SALESPRO.
Regards,
RajanandOh... Sorry my last message was posted wrongly.
Please have a look at the class where this error happens and set a breakpoint to enter on debug mode and try to find the Role cofig Key, the Component usage, the object type and the object subtype for which the system is looking for a screen configuration.
You must have deleted some screen configuration for your initial page on this roles, that is leadig to this problem.
Regards. -
Exception condition "EXCEPTION_CONFIG_NULL" raised.
Dear All,
i am getting following DUMP when i am trying to go detail in product in WED UI.
Error analysis
A RAISE statement in the program "SAPLINTG_IPC_API_CFG_COMMAND" raised the
exception
condition "EXCEPTION_CONFIG_NULL".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
* call virtual machine container *
lv_config_id_str = iv_config_id.
IF cl_crm_cfg_integration=>external_cfg( iv_config_id = iv_config_id ) EQ false.
CALL FUNCTION 'SPC_GET_CONFIG_ITEM_INFO' DESTINATION gv_vmc_dest
EXPORTING
config_id = lv_config_id_str
IMPORTING
ext_config_guid = lv_ext_cfg_guid
product_id = lv_product_id
product_logsys = lv_product_logsys
product_type = lv_product_type
EXCEPTIONS
parameter_exception = 1
command_exception = 2.
CASE sy-subrc.
WHEN 0.
WHEN 1.
RAISE command_error.
WHEN 2.
RAISE internal_error.
WHEN OTHERS.
RAISE internal_error.Item 100: External Configurator Customizing is missing (Exception CX_CRM_CFG_EXT_CUST_MISSING occurred (pr) (WITH E)
When we create follow up Quotation from opportunity, the above following error occurs.
According to the analysis it checks the table COMM_PRODUCT IN that it looks for field u2018Configurableu201D for E status.
Now our product is not a configurable product. So after removing E status from the field Configurableu201D
It gives DUMP in UI as below screen shot.
On debugging it is found that the configurable field in the table comm_product is fetched from function module as below screen shot.
PLEASE GUIDE US TO RESOLVE THIS ISSUE.
Function module in T.code:se24 CL_CRM_CFG_INTEGRATION -> EXTERNAL_CFG (Method)
* check if product is configurable or a product variant
CALL FUNCTION 'CRM_PRODUCT_SALES_READ_API'
EXPORTING
i_product_guid = lv_product
IMPORTING
es_product_sales_data = ls_product_sales_data
EXCEPTIONS
not_found = 1
wrong_call = 2
OTHERS = 3.
IF sy-subrc EQ 0.
IF ls_product_sales_data-use_ipc IS INITIAL AND
* ls_product_sales_data-config EQ gc_config_product-external_cfg.*
rv_external_cfg = true.
ENDIF.
ENDIF.
Modes of configurable products, see table COMS_PR_CONFIG:
CONSTANTS: BEGIN OF gc_config_product,
internal_cfg VALUE 'A', "internal product, ipc configurable
variant VALUE 'C', "variant
*external_cfg VALUE 'E', "internal product, external configurable*
grid VALUE 'G', "GRID product
undefined VALUE 'X', "undefined
END OF gc_config_product.
But my product created on R3 and download to crm. codeing checking for "E" (external_cfg VALUE 'E', "internal product, external configurable) -
Exception condition "CNTL_ERROR" raised for u201CSAPLBEA_OBJ_UF02u201D
Dear All
I am getting the error {Exception condition "CNTL_ERROR" raised.} for the program. SAPLBEA_OBJ_UF02. The billing document is being posted to accounting but I am getting the above error when I view the accounting document through /BEA/CRMB11 (display accounting document). We are using CRM billing.
Plz help
Rgds
PraveenHello Praveen,
Can you apply notes ;
893175 Fixed CNTL_ERROR when using RFC-recorder in tRFC
1303765 Query text or diagnosis text not displayed correctly
thanks
Willie -
"Exception Condition "FEHLER_BEI_LESEN_FVBUP" raised in SMQ1
Hello Experts,
As per our process, We create the Sales Orders in CRM and Transfered to R/3.
When I add a particulat materila and saved , this order is not replicating and stuck in SMQ1.
And the order is failed in Outbound Queue with the error message:
"Exception Condition "FEHLER_BEI_LESEN_FVBUP" raise.
Please could you help me to fix this error and transfer to R/3.
Regards
MadhuHi Madhu,
please Kindly check this note 694362
Hope this solves your problem.
Thanks & Regards,
srikanth.naga -
Hi all,
To enhance CRM extractors we enhance the BDoc and then used the BADI CRM_BWA_MFLOW or CRM_BWA_SFLOW whichever is applicable to extract the data for the enhanced fields and fill the data source.
Also we go to transaction RSA6 enhance the datasource structure.
Now my basic question is why User exists are also enhanced. The procedure is
In transaction RSA6 select the datasource structure and choose the menu "Function enhancment". This goest to CMOD transaction and there the user exit "EXIT_SAPLRSAP_001" is enhanced
Could someone explain me why some coding is done in the user exit when the data which needs to be send from the BDoc is already filled in the badi implementation. When does this user exit actually used. In what scenarios do we use this user exit along with the badi implementation.
Any idea. Thanks for the continued support and I wish "Happy new year" to all of you.
Thanks in advance
JothiHi all,
To enhance CRM extractors we enhance the BDoc and then used the BADI CRM_BWA_MFLOW or CRM_BWA_SFLOW whichever is applicable to extract the data for the enhanced fields and fill the data source.
Also we go to transaction RSA6 enhance the datasource structure.
Now my basic question is why User exists are also enhanced. The procedure is
In transaction RSA6 select the datasource structure and choose the menu "Function enhancment". This goest to CMOD transaction and there the user exit "EXIT_SAPLRSAP_001" is enhanced
Could someone explain me why some coding is done in the user exit when the data which needs to be send from the BDoc is already filled in the badi implementation. When does this user exit actually used. In what scenarios do we use this user exit along with the badi implementation.
Any idea. Thanks for the continued support and I wish "Happy new year" to all of you.
Thanks in advance
Jothi -
"Exception condition "CONTROL_FLUSH_ERROR" raised." during background jobs
hi all,
the program ZTEST is used for downloading a txt file into D: using GUI_DOWNLOAD. this program works fine but when I schedule this porgam in background jobs in tcode SM36 using "job wizard", i am getting errors as Exception condition "CONTROL_FLUSH_ERROR" raised and the error analysis is as
'A RAISE statement in the program "SAPLSFES " raised the exception condition "CONTROL_FLUSH_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.'
How to rectify this error???
points will be rewrded
thanks in advanceGUI_DOWNLOAD is a FM that is designed to download files by interation with the PC directories (only possible in foreground). If the file download is the requirement the u can use application server files for it.
But if you are insisting on notepad and excel documents, then you have to use CLIP and EXECUTE function modules. Refer to Class CL_GUI_FRONTEND_SERVICES that has all the required methods
Maybe you are looking for
-
Ipod cannot be synced unknown error occured (-48)
_Help needed please!_ I've just got a new laptop, downloaded the latest version of itunes on it, connected my ipod to it (old click wheel version 20GB) and this error message keeps popping up: *'The ipod "ipods name" cannot be synced. An unknown erro
-
How do I keep Warp Stabilizer and aeselflink from filling my swap space?
Hello, I'm running the lastest version of AE on OS X, when I try and run warp stabilizer on a composition, aeselflink grows the virtual memory it uses (> 50GB) until it fills my swap space and causes my machine to hang, because the hard drive is full
-
PSE 11 crashes when I attempt to add a new catalog
PSE 11 crashes when I attempt to add a new catalog to those that already exist. No programs are running that might conflict with Organizer, and I can run other functions such as downloading photos from my camera. As soon as I attempt to add a new sub
-
Why is my lock screen blurred? Resetting is only a temporary fix.
-
ITunes 8 - perpetual errormessages with ipod touch!
Hi! I've upgraded to iTunes 8 and I've since had a serious problem that I can't find an end to. I've tried uninstalling iTunes 8, but the normal Add/remove programs won't even uninstall the components! They just start uninstalling, and just at the en