CRM -- PI-- ECC using bdocs

Hi,
I wanted to know the solutions how we can have to intregate CRM Site details using "bdocs" with PI using XIF in CRM and send to ECC Server like CRM >PI>ECC.
Anyone who has done such a scenario kindly share some pointers on the same.Also can we use the FM CRM_UPLOAD_TRIGGER and BAPI_CRM_SAVE For such a case?
Regards,
Anirban

Dear Anirban,
I came accross similar issue with Business Partners in CRM.
where business Parner information in CRM should be sent to PI and then diverted to B1 server.
For CRM system to generate IDocs we need to provide necessary details in TCode: SMOAC
we don't need to take care of XIF during configuration.
If your systems are not fonfigured for IDoc processing, then just configure them like other servers and execute the BAPI that produces BDocs.
automatically IDoc will be generated b'coz of the setting what u made in TCODE : SMOAC in CRM
Best regards
Praveen

Similar Messages

CRM -- PI-- ECC using XIF and bdocs

Hi,
I wanted to know the solutions we can have to intrgate CRM Site details using bdocs with PI using XIF in CRM and send to ECC Server like CRM >PI>ECC.
Anyone who has done such a scenario kindly show some pointers on the same.
Regards,
Anirban

Anirban,
Seriously unless you are doing multiple backends or something strange, you don't even need PI for a CRM to ECC scenario. The CRM middleware does not use PI at all and basically it is standard configuration on the CRM side to send over the information.
Another question is why would you want to send the plant master from CRM back to ERP? Honestly the plant master should probably always be maintained in ERP. This scenario does not make sense from both a business and technical perspective.
Take care,
Stephen

CRM Request Download using Bdoc - material (urgent)

Hi all,
bdoc block size is of 100 and
i need to create one request download for all the materials in the bdoc not 100 request for 100 materials.
since there are 40 bdocs in error....
if any one know any function module or any other logic to fullfill the requiremernt please reply soon....its urgent.....
points will be rewarded.

Hi Sudipta,
my email id [email protected]
[email protected]
thanks,
Aniket

How to update Factory calender in CRM from ECC?

Hi All,
Factory calenders are downloaded to CRM from ECC, using adapter object DNL_CUST_CAL_C in Initial load (R3AS). My doubt is, whenever a new holiday is added to Factory calender in ECC, how the particular added holiday will be downloaded to update the same in CRM system?
Please help me.
Regards,
Maddy

Hello Maddy,
In my system download object DNL_CUST_CAL_C is for the download from the CRM (online) database to the old consolidated database (CDB, for the offline Mobile Sales scenario). You could see this in transaction R3AC3.
For your scenario I don't know how to download. This thread here speaks of a manual adjustment in transaction SCAL.
http://scn.sap.com/thread/274825
Best regards,
Thomas Wagner

Buisness Iedntification numbers From CRM to ECC

Hi I want to upload the BUT0ID table from CRM to ECC using middleware..is there any standard adapter object to upload the table.
And if not is there any standad mapping function module to create a custom object?
Please reply
thanks

can someone reply?

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

Can I use BDOCs for XI Integration scenario's when CRM system exists

Hi All
   Can I use the Bdocs for integration with CRM system ?
   In XI is there any diff...bet Bdocs and Idocs ?
   When can i use BDOCs? When IDOCs?
Can any one help me this pl....
Adv...thanks
regards
kiran LVS

Hi Kiran
     In addition to the above information add the following threads
     where you can find every thing about the integration between
     webapplication -
> XI -
> SAP CRM or SAP R/3
     (Webdynpro)
     /people/saravanakumar.kuppusamy2/blog/2005/02/07/interfacing-to-xi-from-webdynpro
     https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
     /people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
     /people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
     /people/riyaz.sayyad/blog/2006/05/10/consuming-xi-web-services-using-web-dynpro-150-ui-design-part-iii
I hope this will surely help you and
Check in SDN " <b>XI to CRM</b> " there are many threads exists.
regards
prasad

Bdocs- from CRM to ECC

Hi
I have a requirement where i have to find the account details like 'acc id, acc name', etc & the 'transaction status' from the unprocessed BDOCS from CRM to ECC.
Actually the data flows from Oracle - Siebel - Crm - Ecc.
The problem is we have some UN-processed Bdocs from Crm to Ecc for which for every account details changed a new Bdoc have been created and those changed Bdocs have to be found and know the account details (like Acc id, Acc name) & Transaction Status for all the generated Bdocs and get them into one Excel sheet.
Please help me to get the details.

Hello Christian
Many thanks for the quick response.
Yes both are identical as we both are working on the same issue.
Christian basically we want to know , Like for every failed bdoc there is detail available but how to get the detail for processed bdoc.
With account we mean bp number and relevant corresponding data,
could you help us
Best Regards..

Mapping Z-fields of BP in CRM to ECC and vice versa

Hi Gurus,
Z-fields for BP were created in CRM using EEWB and AET tool. These z-fields need to be transferred from CRM to ECC, standard fields like KNB1-ALTKN, KNKK-REVDB,KNKA-KLIME... etc.
Now, that these z-fields are added in the BDoc. I believe no enhancement is required on CRM.
Please guide me on how to map these z-fields from CRM to standard feilds of ECC.
Thanks & Regards
Praveen
Edited by: Praveen on Apr 19, 2010 10:19 AM

Hi,
Thats right! C03 best practices would be certainly helpful to you.
Few important steps for BP repllication from CRM to ECC would be
In CRM , First define your Logical destination in BD54 .
1) SU01 Transaction to create users : create user in CRM & R/3
2) Transaction code SM59 : Create RFC DESTINATION .. here u use the users created for reaching into R/3 from CRM
3) transaction code: SMOEAC: ADMINISTRATION CONSOLE:-
here define Publication, subscription and site ( OLTP) , and define replication objects ( like BUPA_MAIN, BUPA_REL)
4) define Queue: SMQR and SMQS - inbound and outbound queue /
Que registration .
5) check entry in R/3 side tables:- Make the proper entry into R/3 side tables in SM30
a)CRMRFCPAR
b)CRMPAROLTP
c)CRMSUBTAB
d) CRMCONSUM
These are important steps for Middleware settings between CRM & R/3
In addition to this , you need to correctly define your
1) in CRM ,BP GROUPINGS with Internal Number range
2) in R/3 define "Account Group" with "External Number Range" for BUSINESS PARTNER
3) In R/3 , Mapping of CRM CLASSIFICATION with R/3 account group...e.g. Classification B for customer with ACCOUNT group of R/3
You need to also map in CRM correctly the partner functions and R/3 Partner functions.
regards,
PD
Reward points if it helps...

How can I Force/relaunch BP replication from CRM to ECC

Hi everybody,
We had some replication problem with sold-to-party BPs when creating them in CRM (Tr Code BP). The CRM002 id was not implemented in most cases. A job was planned to relaunch the Bdocs automatically every hour. It seemed to be ok for a moment.
However we still have some sold-to-party BPs that are not replicated at all in ECC (Master Data and sales data). The usual procedure we set to trigger the replication is checking a case in BP Tr. but when I uncheck the case and check it again, the replication doesnt happen.
Is there a way to force manually the replication of a sold to party BP from CRM to ECC?
Second question in replication subject : We also have partial replication in ECC. For example the Tax classification partially replicates. It's like if the replication process in crashing on the way and the result is no CRM002 id back in the BP master data in CRM. Do you have any idea of where it's coming from?
Is there a Transaction like SMW01 (CRM) in ECC in order to trace replication problems of processes?
Many Thanks.
Laurent

Hi,
Firstly , please check if you have any filters in for adapter object customer_main in trx. R3AC1 (which prevants data replication)
Next, check if your inbound (SMQR) or outbound queues (SMQS) of CRM are de-registered.
You can use trnx.
CRMM_BUPA_SEND
to manually replication a BP to the ECC system.
No.. there is no monitor in ECC like the Bdoc monitor (SMW01) in CRM.
Hope this helps. Reward if helpful!
Thanks,
Sudipta.

Custom fields replication in sales order from CRM to ECC

Hi Experts,
We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
Regards,
Manohar

Hi Manohar
You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
Regards
Gavin

Replicating custom texts in BP from CRM to ECC systems

Hi All,
I'm trying to set up synchronisation of a custom text held against a business partner in CRM with our ECC system. So, in CRM, if I go to transaction BP and go to change mode for a partner and then go to the long texts tab... As well as the 2 standard Correspondance and Accounting Note text ID's my functional consultant has also configured a third text, with ID Z001. We are trying to get this to synchronise with ECC.
With a bit of debugging I can see the text is being sent in a BDOC across to ECC but it isn't being populated into the customer master. On the ECC side the custom text has been set up against the sales area of the customer master - I'm not sure of what else has been done there.
Has anyone done this before who can give us some help/advice? Bear in mind I know almost nothing about CRM to ECC synchronisation and BDOC's so I'm struggling with this!
Thanks in advance,
Gareth.

Hi Gareth,
While researching this issue I came across note number 622133. https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=622133&_NLANG=E
Its an old note, but it pointed me in the general direction of FM 'PI_BP_MAP_TEXT_IDS_CRM_R3'. This FM looks in table 'CRMTEXTID' to check if any mappings were maintained. Now if you do a where-used on CRMTEXTID, you see that it is used in a view, V_CRMTXTID. So go to SM30, maintain that view, map your R/3 text IDs to CRM text IDs and you should be all set.
There must be a more elegant way to get to this table, but in the short term, this should fix your problem. I haven't tested it yet on my system but I get the feeling this should work

BP EEWB field in CRM to ECC zfield in KAN1

Hello all ..
I have added few custom fields to BP through EEWB and want them to replicate to ECC .
Here are the steps I followed ...
We are on CRM 5.0 and ECC 6.0
1) Added the fields in same order as EEWB in BSS_CENTIX (component type GB_BAPIUPD ) and BSS_CENTI ( data element/domain same as in BUT000) in ECC
2) Maintained table TBE24, Create a product and mark it active in ECC.
Maintained table TBE34 for the event DE_BALE with same product and Function module = Z_INTERFACE_DE_BALE
( copy of SAMPLE_INTERFACE_DE_BALE ) in ECC
3) I wrote the code in Z_INTERFACE_DE_BALE and mapped the custom fields to structures in the CT_IDOC_DATA.
I have mapped custom field/Z field in KNA1 to the eewb field in Z_INTERFACE_DE_BALE like this...
extended the Idoc i.e added a custom segment ZE1KNA1M under E1KNA1M
But still the field is not getting replicated. ( though eewb fields are replicated to standard fields in Kna1)
Hope Iu2019m clear with my question.
Thanks in advance.

Hi Aday,
We have similar kind of requirement. Would like to know whether you are using BDOC to transfer BP created in CRM to R3? In this function module Z_INTERFACE_DE_BALE, if we populate the idoc structure for the required fields will it update the customer with required field information.
Thanks in advance. Your help is highly required.
Regads,
Ranadev

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Not able to post accounting document from CRM to ECC.

I am tring to post accounting document through BDOC but it is not posting . Can any one have idea how we can post accounting document to ECC from CRM with out use of Bdoc . Thanks

Hi,
Check if any of the condition types which has the account is having a tax code.. That tax code shouldn't have defined as EC tax code.
When you double click on the line item condition type which will be posted to accounts, you could see the G/L account and tax code. Ask you FI consultant to check how that tax code has been defined.
Btw, it is always good if you open a new thread.. But you can refer the old thread inside your post.
Regards, Sai Krishna.

CRM -- PI-- ECC using bdocs

Similar Messages

Maybe you are looking for