Crm product master

hi all,
my requirement is i have a z-table with fileds
1).product category, 2).product id,3).product description.
for a product id, i should fill product category and product description.
plz help me wid related tables and fields.
thanx in advance.

Hi Shiva!,
You need these tables:
COMM_PRODUCT -- Product --> Product guid and product id.
COMM_PRSHTEXT -- Product Description --> Product guid and description
COMM_PRPRDCATR -- Product - Product Category --> Assignment product with category
COMM_PRCAT -- Product Category --> table with the category guids
Hope it helps you.
Regards,
Mon

Similar Messages

In which screen the Profit Center field can be seen in SAP CRM Product Master?

Hi SAP Experts,
Please provide your valuable inputs on the below request:
1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see?
2) At the moment we are not using the profit center field in either of the systems(ECC and SAP CRM) in Material, we want to use this then how to go ahead to have this field in CRM.
3) If we add the profit center value in material master in ECC under general and plant data view then how this value will be replicated into SAP CRM , delta load or initial load?
We are using SAP ECC 6.0 and SAP CRM 7.1 systems.
Appreciated for your inputs at the earliest.
Best Regards,
SV

Hi,
Substitution Rule :-
Prerequisite :
1. WBS Level (PRPS-STUFE) = ' 3 ' AND Statistical Indicator (PRPS-XSTAT) = ' X '
Substitute
1. Profit centre (PRPS-PRCTR) - ' '
Hope this will clear you...
Regards,
Hari

How to do the CRM Product Master Data extraction?

Hello guys,
I have to upload the CRM Product Master Data from a CRM 6.0 system to a BI 7.0 system.
The only information that I have is the infocube in the BI for the extraction is 0CRM_PROD.
I've checked that the CRM Product table COMM_PRODUCT and found that entries in the table and the infocube don't correspond to each other exactly. I also cannot find approprite DataSource in BI or CRM system for the data transfer.
Who can telll me anything about this kind of master data extraction to BI?
Thanks in advance.
Best Regards

Hi,
u tried using the generic extraction using rso2.create one datasource and give the table name comm_prod.
bye.

Syndication and printing using CRM Product Master/product catalog

Hi,
I would like to understand if we could do syndication and printing using CRM Product Master/product catalog.
thanks
anantharam

Out of the box, you have a feature to export the Product Catalog - as an XML. Rest of the nice features you want are not available out of the box.
If printing and syndication are primary and important features you want to have, then you must explore if [SAP SRM MDM Catalog|http://help.sap.com/saphelp_srmmdm10/helpdata/en/44/ec6f42f6e341aae10000000a114a6b/frameset.htm] will be suitable for you. It is a different SAP product and here is the[ link to explore.|http://help.sap.com/saphelp_srmmdm10/helpdata/en/44/ec6f42f6e341aae10000000a114a6b/frameset.htm]

How to fetch data for CRM Product Master

Hi,
I'm trying to write a report on the product master in CRM.
In our current setup, we have few Ztables attached to the Product Master tabs.
The key field linking the Ztables is
field name:FRG_GUID
component type COMT_FRG_GUID
description:SET GUID
I would like to know if there is any function module which reads the product master table based on Product_ID just like 'for example 'CRM_ORDER_READ'.( which gives all the GUID's based on Business Transaction Numbers)
I need this because I'm not able to match the Fragment_guid of many DB tables to each other.
Please help.
Regards
Rasheed

Hi Pratik,
Thank you for trying to help me. I shall explain my scenario for better undestanding.
I'm creating a Product Master Report which is linked to several Z tables.I need to fetch the details based on the price group .
The structure of one of the Z tables is as below:
Field Name               Component Type
.INCLUDE                     COMT_FRG_KEY
CLIENT                     MANDT
FRG_GUID     COMT_FRG_GUID
.INCLUDE                     COMT_PRODUCT_ADM
VALID_FROM     COMT_VALID_FROM
VALID_TO                     COMT_VALID_TO
UPNAME                     COMT_UPNAME
HISTEX                     COMT_HISTEX
LOGSYS                     COMT_LOGSYS
ZZ0010                     ZMODELTYPE
ZZ0011                     ZMODELDESC
ZZ0012                     ZMODSALEABLEAREA
ZZ0013                     ZMEAUNIT
ZZ0014                     ZBUILTUPAREA
ZZ0015                     ZCARPETAREA
ZZ0016                     ZTERRACEAREA
ZZ0017                     ZGARDENAREA
ZZ0018                     ZBALCONYAREA
now the only way I can get the information from this table is if I get the FRG_GUID.
Is there any way where I can get all the FRG_GUID for the PRODUCT_GUID'S.
Regards
Rasheed

CRM Product master table

Hi all,
       Can you please let me know tables related with products(created) in CRM.
Thank you and regards,
spr

Hi Shailaja,
            The title was DYNPRO_NOT_FOUND.
the error message was..
The current ABAP program "SAPLCOM_PRODUCT_DETAIL_UI_2 " had to be terminated because one of the statements could not be executed.This is probably due to an error in the ABAP program.
The program had to be terminated.
and ask me to check the notes related with.
"DYNPRO_NOT_FOUND" C
"SAPLCOM_PRODUCT_DETAIL_UI_2 " or "LCOM_PRODUCT_DETAIL_UI_2O02 "
"SET_ALTID_EDITABLE"
I suppose there i made mistake regading making active or inactive while saving the product.
Also I cannot run COMMPR01 transaction code to check the product.
Thank you and regards,
spr

Product master in CRM and R/3

Hi Gurus,
can anybody make my understanding clear regarding the difference of product master in CRM and R/3. any links to know more on it will also help.
Thank you in advance.
Regards,
sasmita

Hi Sasmita,
Here are some of inputs will help for undersatnding:
The CRM product master is a collection or arrangement of various settypes which contain specific data.
Pre-defined settypes are delivered (e.g. basic product data; conversion of unit of measure)
Enhancement of the product master with own settypes is possible
Settypes correspond to database tables
Attributes correspond to your product characteristics.
Attributes can be summarized with the help of set types
In the system there are standard set types which are always available. However, you can also create and implement user-defined set types, to depict marketing data, for example.
The usage of set types can be restricted (e.g. certain set types only allowed for products of type product) Distribution chain-dependent set types can be created.
A set type is only permissable for a product when the set type is assigned to the category to which you then assign the product. To assign a set type to a category, use the function Edit categories and hierarchies.
You can assign a set type to several product categories within a category hierarchy. However, each set type can only be assigned within one hierarchy. In doing so, a multiple assignment of a set type to one and the same product (over contrasting categories) is prevented.
A product can be assigned to several categories, as long as these are within different category hierarchies. A product can also be assigned to only one category per hierarchy.
The assignment to the base hierarchy R3PRODSTYP is vital, so that basic data set types are available, for example.
R3PRODSTYP depicts the product types present in the R/3 system.
Customer product numbers can be assigned. This Customer product ID is stored in the relationships
Global Trade Item Number (GTIN)
Customer-own checks can be defined before a product can be saved. Enhancements  Consistency check
Transaction :
COMMPR01-Maintain Products
COMMPR02-Mass Maintenance for Inactive Products
COMM_HIERARCHY-Maintain Categories and Hierarchies
COMM_ATTRSET- Maintain Set Types and Attributes
Tables:
Product (active) COMM_PRODUCT
Product (inactive) COMM_IPRODUCT
Product description COMM_PRSHTEXT
Category hierarchy COMM_HIERARCHY
Category COMM_CATEGORY
Set types COMC_SETTYPE
Attributes COMC_ATTRIBUTE
Relationships COMM_IL_*
COMM_PRODUCT : Product header and administration data.
COMM_CATEGORY : Category
COMM_HIERARCHY : Category Hierarchy
COMM_PR_FRG_REL :
COMM_FRGTYPE :
COMC_SETTYPE :
COMC_PRODUCT : General Product Settings
COMC_R3_FIELDS : Assignment of R/3 material master fields to CFOP
COMM_CFGMAT : Basic Data for Materials
Hope this will help.
Regards,
Arjun
Pl. Do reward the points

Maintaining Product relationships in accessories section in product master

Hi all,
We have a requirement to add the maintenance product in the u201CAccessories section in the Relationships tabu201D of the CRM product master data.
Kindly let me know the standard FM/BAPIu2019s or programs can be used to add the relationship between two products.
Please note we need the FM/BAPI only to do this.
With Regards,
Sujitha.S

Hi Addy,
These releationships can be maintained directly in Web UI too. If you have tabs like Accessories under Relationships in Products, then in Web UI too u will see an Assignment Block by name Accessories. If you dont, then pick it from personalisation. If its not in Personalisation then you will have to pick it from Page Configuration.
But those relationships can be maintained directly in Web UI too but u wont see any Relationships AB in products in Web UI.
Let me know in case you still have doubts.
CHeers,
MG

Middleware: extended Material to CRM Product, EEWB needed?

Hi all,
If Material in ECC contains custom fields extended by EEWB to the MARA table, and these information are needed in CRM during replication, do I need to use EEWB to extend in CRM as well? (if yes, which table to be extended for product)
Or creating new attributes to the attribute set and assign it to CRM Product's set type will do?
Kindly advise.
cheers,
ginnie

Hi Ginnie,
You can create a new attributes to the attribute set and assign it to CRM Product's set type. But if you want to have the information in these Zfields in ECC to pass into CRM product master fields then you need to perform the below steps.
Configuration Tables TBE24 and TPS34 in ECC must be maintained for triggering the CRM Middleware download of data from ECC to CRM. In Table TPS34 the Process CRM0_200 contains the entry for CRM Middleware download of data.
1. Activate Customer Product by maintaining table TBE24 using transaction SM30
2. Maintain the Custom product e.g. ZPROD
3. Add the function module that the OPEN_FI function module can find for a Business Transaction Event (BTE) as an alternative to a standard function module by maintaining table TPS34 using transaction SM30
4. Create Function module for mapping in ECC. For e.g. Function Module ZSEND_PROD_TO_CRM handles mapping the custom fields to be transferred to the CRM system.
5. After this you should implement the source code to do the BAPIMTCS mapping to send the data to CRM.
6. Finally, you will need to implement a BADI PRODUCT_CUSTOMER2 in CRM, method MAP_R3_TO_CRM_MATERIAL which will map all of the custom fields from ECC into the Product Master in CRM.
Hope this helps!!!
Regards,
Chandrakant

CRM ISA 5.0-Sending field value from-Product master Product Catalog Trex

Dear Friends,
I have Enhanced a Column field in Product Master > Accessory tab Page
I want to send the above Column Values to Index / Trex Server , Then java will take from trex server and display in web as per their requirement.
Can you suggest how to do that ?
I found 2 below Badi : Can you please how to implement this or this BADI is not suggest able.
CF_PCAT_PRDEXTSN_VAL Additional Attributes in Product Catalog - Read Values
PCAT_IMS_FEED_VAL Customer-Specific Value Enhancement for IMS Data Supply
BADI For Product Catalog Changes: PRODUCT_UPDATE, PRODUCT_UPDATE_IMS, PRODUCT_UPDATE_CVIEWS
Please reply as soon as possible
Thanks
Upen

Hello,
you better ask this question in the SAP CRM: Webclient UI - Framework. Also I would suggest opening a OSS Message.
Regards
Gregor

Can we Delete the Product/Material from Product Master in CRM

Hi Gurus,
I want to delete some test products from Product master, I don't see any link for delete there in product master transaction.
Can we Delete the Product from Product Master in CRM??
Thanks in Advance.
Regards,
Manoj Tiwari

Try this:
*& Report ZVB_PRODUCT_DELETE (release CRM 4.0 SP03) *
*& Instructions are in OSS Note #427332 *
report zvb_product_delete line-size 300.
const, include
include com_product_const001.
include com_product_const003.
include com_product_const009.
include com_product_const011.
include com_settype_attribute_const03.
tables: comm_iproduct, "#EC NEEDED
 comm_product.
constants:
 gc_program type programm value 'COM_PRODUCT_DELETE_SINGLE'.
data: gv_product_guid type comt_product_guid,
 gv_prty type comt_product_type,
 gv_syslog(70) type c,
 lv_mobile_active type comt_boolean,
 lv_delete type comt_boolean value 'X'.
data: lt_settypes type comt_frgtype_tab_ext,
 lt_status_guid type comt_prd_status_guid_tab.
data: begin of lt_products occurs 0,
 product_id like comm_product-product_id,
 product_guid like comm_product-product_guid,
 end of lt_products.
Screen User query
selection-screen comment /1(60) text-006.
selection-screen skip 2.
select-options: s_prid for comm_product-product_id.
*parameters: p_prid type comt_product_id obligatory,
parameters: p_prty type comt_product_type obligatory default '01',
 p_logs type comt_logsys obligatory,
 p_objf type comt_product_object_family,
 p_send as checkbox modif id 001 default on,
 p_usage as checkbox modif id 001 default off,
 p_test as checkbox default 'X'.
at selection-screen output.
perform check_mobile_download
 changing lv_mobile_active.
if lv_mobile_active is initial.
 loop at screen.
 check screen-group1 = '001'. "disable field p_send, p_usage
 screen-active = '0'.
 modify screen.
 endloop.
endif.
start-of-selection.
perform check_authority.
Write syslog entry
concatenate 'Rep. ' sy-repid ': ' p_prid(30) '/' p_prty '/' p_logs
 into gv_syslog. "#EC NOTEXT
call 'C_WRITE_SYSLOG_ENTRY'
 id 'TYP' field ' '
 id 'KEY' field 'C00'
 id 'DATA' field gv_syslog .
inactive product are not supported here
select * from comm_iproduct
 where product_id = p_prid
 and product_type = p_prty
 and object_family = p_objf
 and logsys = p_logs.
endselect.
if sy-subrc = 0.
 write: / text-001, text-005.
 exit.
endif.
read products according to the selection criteria
select * from comm_product
 into corresponding fields of table lt_products
 where product_id in s_prid
 and product_type = p_prty
 and object_family = p_objf
 and logsys = p_logs.
if sy-subrc ne 0.
 write: / text-010.
 exit.
endif.
loop at lt_products.
read product and enqueue
 perform product_enqueue
 using lt_products-product_id
 p_prty
 p_logs
 p_objf
 changing gv_product_guid
 gv_prty.
 check not gv_product_guid is initial.
 if p_usage = on.
 perform check_usage
 using gv_product_guid
 changing lv_delete.
 endif.
 check lv_delete = on.
 check p_test = space.
first delete the component of the IBase
 perform delete_ibasecomponent
 using gv_product_guid.
 perform delete_extensions
 using gv_product_guid
 lt_settypes.
 perform delete_settypes
 using gv_product_guid
 lt_settypes
 changing lt_status_guid.
 perform delete_interlinkages
 using gv_product_guid.
 perform delete_pme_data "multivalue attributes
 using gv_product_guid.
 perform delete_decoupled_data "long text, longmatnr,
 using gv_product_guid. "ibase prodvar,...
 perform delete_status
 using lt_status_guid.
 perform delete_favorites
 using gv_product_guid.
 perform delete_clear_case
 using gv_product_guid.
 if p_send = 'X'.
 perform send_deletion_to_mw
 using gv_product_guid.
 endif.
 delete from comm_product where product_guid = gv_product_guid.
 delete from comm_producth where product_guid = gv_product_guid.
 delete from comm_product_idx where product_guid = gv_product_guid.
 delete from comm_prwb_user_2 client specified
 where client = sy-mandt and last_object = gv_product_guid.
 call function 'BAPI_TRANSACTION_COMMIT'
 exporting
 wait = 'X'.
 write: / text-001, lt_products-product_id, text-004.
endloop.
*& Form product
form product_enqueue
 using iv_prid type comt_product_id
 iv_prty type comt_product_type
 iv_logs type comt_logsys
 iv_objf type comt_product_object_family
changing ev_pguid type comt_product_guid
 ev_prty type comt_product_type.
data ls_product type comt_product.
call function 'COM_PRODUCT_GUID_GET'
 exporting
 iv_product_id = iv_prid
 iv_product_type = iv_prty
 iv_logsys = iv_logs
 iv_object_family = iv_objf
 iv_show_popup = 'X'
 importing
 ev_product_guid = ev_pguid
 exceptions
 not_found = 1
 wrong_call = 2
 internal_error = 3
 others = 4.
if sy-subrc <> 0.
 write: / text-001, space, iv_prid.
 write: text-003. "Product not found
 exit.
else.
 write: / text-001, space, iv_prid.
 write: text-002. "Product found
endif.
call function 'COM_PRODUCT_READ_SINGLE'
 exporting
 iv_product_guid = ev_pguid
 iv_enqueue_mode = ' '
 importing
 es_product = ls_product
 exceptions
 not_found = 1
 wrong_call = 2
 foreign_lock = 3
 enqueue_failed = 4
 others = 5.
if sy-subrc <> 0.
 if sy-subrc > 2.
 write: / text-001, space, iv_prid.
 write: text-007. "Product enqueued
 exit.
 else.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 exit.
 endif.
 exit.
endif.
ev_prty = ls_product-product_type.
special authotirty check (with considering the assigned
categories)
call function 'COM_PRODUCT_CT_AUTHORITY_CHECK'
 exporting
 iv_auth_act = '06'
 iv_product_guid = ev_pguid
 exceptions
 no_authority = 1
 wrong_call = 2
 internal_error = 3
 others = 4.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " product
*& Form delete_extensions
form delete_extensions
 using iv_product_guid type comt_product_guid
 et_settype type comt_frgtype_tab_ext.
data: lv_db_tab type ddobjname,
 lv_subrc_pr_guid like sy-subrc,
 table_name_ref type ref to data,
 lt_extension type comt_frgtype_tab_ext,
 ls_extension type comm_frgtype_ext.
field-symbols: <table_name> type any,
 <field_name> type any.
check not iv_product_guid is initial.
delete extensions e.g. COMM_PRFREEATTR, CRMM_PR_TAX, COMM_PR_UNIT,
 COMM_PR_SHTEXT,COMM_PR_GTIN, comm_prprdcatr,..
perform load_extensions
 using iv_product_guid
 changing lt_extension
 et_settype.
loop at lt_extension into ls_extension.
 lv_db_tab = ls_extension-frgtype_tab.
 check not lv_db_tab is initial. "CRM_CAT_SAT & CRM_CAT_PUR
does table exist ?
 call function 'DDIF_NAMETAB_GET'
 exporting
 tabname = lv_db_tab
 exceptions
 not_found = 1
 others = 2.
 check sy-subrc = 0.
Due to any reason (I don't know why) sometimes we have product_guid
and sometimes we have frg_guid as name of the key field.
 create data table_name_ref type (lv_db_tab).
 assign table_name_ref->* to <table_name>.
 assign component 'PRODUCT_GUID' of structure <table_name>
 to <field_name>.
 lv_subrc_pr_guid = sy-subrc.
 if lv_subrc_pr_guid = 0.
 delete from (lv_db_tab)
 where product_guid = iv_product_guid.
 else.
 delete from (lv_db_tab)
 where frg_guid = iv_product_guid.
 endif.
delete history of extension table
 concatenate ls_extension-frgtype_tab 'H' into lv_db_tab.
 create data table_name_ref type (lv_db_tab).
 assign table_name_ref->* to <table_name>.
 assign component 'LOGSYS' of structure <table_name>
 to <field_name>.
 check sy-subrc = 0.
 call function 'DDIF_NAMETAB_GET'
 exporting
 tabname = lv_db_tab
 exceptions
 not_found = 1
 others = 2.
 check sy-subrc = 0.
 if lv_subrc_pr_guid = 0.
 delete from (lv_db_tab)
 where product_guid = iv_product_guid.
 else.
 delete from (lv_db_tab)
 where frg_guid = iv_product_guid.
 endif.
endloop. " end of loop for all extensions
endform. " delete_extensions
*& Form delete_settypes
form delete_settypes
 using iv_product_guid type comt_product_guid
 it_settypes type comt_frgtype_tab_ext
 changing et_status_guid type comt_prd_status_guid_tab.
data: ls_reldesc type coms_pr_org_rel,
 lt_reldesc type comt_pr_org_rel_tab,
 lt_reltab type ref to data,
 ls_settype type comt_settype_ext,
 ls_table type tabname,
 ls_status_guid type crmt_object_guid.
field-symbols:
 <fs_reltab> type any table,
 <fs_relrow> type any,
 <fs_settype> type comt_frgtype_guid,
 <fs_setguid> type comt_frg_guid,
 <fs_statguid> type crmt_object_guid.
memorise product status guide
ls_status_guid = iv_product_guid.
append ls_status_guid to et_status_guid.
load description of relation tables
call method cl_com_product_org_type=>comc_pr_org_link_read_all
 importing
 et_pr_org_rel = lt_reldesc
 exceptions
 no_desc = 0.
for all relation types (e.g. comm_pr_frg_rel, comm_pr_frg_rod)
loop at lt_reldesc into ls_reldesc.
read product/settype relations
 create data lt_reltab type (ls_reldesc-link_table_ttyp).
 assign lt_reltab->* to <fs_reltab>.
 call function ls_reldesc-func_rel_read_pr
 exporting
 iv_product_guid = iv_product_guid
 importing
 et_rel = <fs_reltab>
 exceptions
 wrong_call = 1
 not_found = 2
 others = 3.
 check sy-subrc = 0.
for all links...
 loop at <fs_reltab> assigning <fs_relrow>.
 assign component 'FRAGMENT_TYPE' of structure <fs_relrow>
 to <fs_settype>.
 assign component 'FRAGMENT_GUID' of structure <fs_relrow>
 to <fs_setguid>.
 assign component 'STATUS_OBJECT' of structure <fs_relrow>
 to <fs_statguid>.
 read table it_settypes with key frgtype_guid = <fs_settype>
 into ls_settype.
 check sy-subrc = 0.
 settype table
 delete from (ls_settype-frgtype_tab)
 where frg_guid = <fs_setguid>.
 history table
 concatenate ls_settype-frgtype_tab 'H' into ls_table.
 delete from (ls_table)
 where frg_guid = <fs_setguid>.
 memorise settype status guide
 if not <fs_statguid> is initial.
 ls_status_guid = <fs_statguid>.
 append ls_status_guid to et_status_guid.
 endif.
 endloop. "of links
relation table (e.g. comm_pr_frg_rel)
 delete from (ls_reldesc-link_table)
 where product_guid = iv_product_guid.
history table
 concatenate ls_reldesc-link_table 'H' into ls_table.
 delete from (ls_table) where product_guid = iv_product_guid.
endloop. " of relation types
endform. " delete_settypes
*& Form delete_interlinkages
form delete_interlinkages
 using iv_product_guid type comt_product_guid.
constants: cv_db_name(8) type c value 'COMM_IL_',
 cv_suffix_h(2) type c value '_H'.
data: lt_ilinks type comt_il_data_tab,
 lt_reltype type comc_il_reltype_tab with header line,
 lv_ddictype type dd02v-tabclass,
 lv_dbname type comt_structure.
CHECK p_objf IS INITIAL.
first we have to read all ILs where the productguid is sourceguid
refresh lt_ilinks.
call function 'COM_IL_API_WHERE_USED'
 exporting
 iv_objectguid = iv_product_guid
 iv_objtype = gc_bus_objtype_bus1178
 iv_direction = 'S'
 importing
 et_interlinkage = lt_ilinks.
check not lt_ilinks[] is initial.
delete adjacent duplicates from lt_ilinks comparing reltype.
read ilinkage customizing
select * from comc_il_reltype into table lt_reltype
 for all entries in lt_ilinks where reltyp = lt_ilinks-reltype.
delete interlinkages
loop at lt_reltype.
 if lt_reltype-streltyp ne space.
 concatenate cv_db_name lt_reltype-streltyp into lv_dbname.
 else.
 concatenate cv_db_name lt_reltype-reltyp into lv_dbname.
 endif.
delete data
 call function 'DDIF_NAMETAB_GET'
 exporting
 tabname = lv_dbname
 importing
 ddobjtype = lv_ddictype
 exceptions
 not_found = 1
 others = 2.
 check sy-subrc = 0 and lv_ddictype = 'TRANSP'. "#EC NOTEXT
 delete from (lv_dbname) where sourceguid = iv_product_guid.
delete history
 check lt_reltype-change_doc = 'X'.
 concatenate lv_dbname cv_suffix_h into lv_dbname.
 call function 'DDIF_NAMETAB_GET'
 exporting
 tabname = lv_dbname
 importing
 ddobjtype = lv_ddictype
 exceptions
 not_found = 1
 others = 2.
 check sy-subrc = 0 and lv_ddictype = 'TRANSP'. "#EC NOTEXT
 delete from (lv_dbname) where sourceguid = iv_product_guid.
endloop.
endform. "delete_interlinkages
*& Form delete_pme_data
form delete_pme_data
 using iv_product_guid type comt_product_guid.
delete multivalue attributes from PME
data: lt_pmemap like standard table of comm_pme_prd_map,
 ls_pmemap like comm_pme_prd_map.
select * into table lt_pmemap
 from comm_pme_prd_map
 where crm_object_guid = iv_product_guid.
check sy-subrc = 0.
loop at lt_pmemap into ls_pmemap.
 call function 'CRM_SCE_DB_KB_DELETE'
 exporting
 iv_kbid = ls_pmemap-kbid.
endloop.
delete comm_pme_prd_map from table lt_pmemap.
endform. "delete_pme_data
*& Form send_deletion_to_mw
form send_deletion_to_mw
 using iv_product_guid type comt_product_guid.
data: cv_function_module like rs38l-name
 value 'CRM_PROD_SEND_DELETION_MESSAGE'. "#EC NOTEXT
data: lt_product_guid type comt_product_s_tab with header line.
lt_product_guid-product_guid = iv_product_guid.
append lt_product_guid.
call function 'FUNCTION_EXISTS'
 exporting
 funcname = cv_function_module
 exceptions
 function_not_exist = 1
 others = 2.
check sy-subrc = 0.
call function cv_function_module
 exporting
 it_product_guid = lt_product_guid[]
 iv_test_only = space
 exceptions
 internal_error = 1
 others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " send_deletion_to_mw
*& Form check_mobile_download
form check_mobile_download
changing ev_mobile_active type comt_boolean.
data:
 cv_db_tab type ddobjname value 'SMOMARA'.
data: lv_lines type i value 0.
clear ev_mobile_active.
call function 'DDIF_NAMETAB_GET'
 exporting
 tabname = cv_db_tab
 exceptions
 not_found = 1
 others = 2.
check sy-subrc = 0.
select count( * ) into lv_lines
 from (cv_db_tab) up to 10 rows. "#EC CI_NOWHERE
if lv_lines > 0.
 ev_mobile_active = on.
endif.
endform. " check_mobile_download
*& Form check_authority
form check_authority.
tables: t000, comc_pr_tool_reg. "#EC NEEDED
check productiv system - report must not be executed
select single * from t000 client specified "#EC CI_CLIENT
 where mandt = sy-mandt.
if t000-cccategory = 'P'.
 message e807(com_product) .
 leave.
 leave to transaction ' '.
endif.
Check authority for product delete
call function 'COM_PRODUCT_AUTHORITY_CHECK'
 exporting
 iv_auth_act = '06'
 exceptions
 no_authority = 1
 wrong_call = 2
 internal_error = 3
 others = 4.
if sy-subrc ne 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MESSAGE e808(com_product).
 leave.
 leave to transaction ' '.
endif.
Additional step: registration
select single * from comc_pr_tool_reg
 where program_name = gc_program
 and user_name = sy-uname
 and exec_date = sy-datum.
if sy-subrc ne 0.
 message e809(com_product).
endif.
endform. " check_authority
*& Form delete_decoupled_data
form delete_decoupled_data
 using iv_product_guid type comt_product_guid.
include com_product_const018.
Deleting decoupled and customer requested data (long_text, longmatnr,
upload registry, ibase product variants coming from R/3,
archive verify registry). Documents like PDF,XLS,DOC,JPG stored in
Content Management will not be deleted
load BADI implementations
class: cl_exithandler definition load.
data: exit_obj type ref to if_ex_com_product_delete.
call method cl_exithandler=>get_instance
 exporting
 exit_name = gc_badi-com_product_delete
 null_instance_accepted = on
 changing
 instance = exit_obj.
call BADI implementations (User Exit)
call method exit_obj->delete_extra_data
 exporting
 iv_product_guid = iv_product_guid.
endform. " delete_decoupled_data
*& Form load_extensions
form load_extensions
 using iv_product_guid type comt_product_guid
changing et_extension type comt_frgtype_tab_ext
 et_settype type comt_frgtype_tab_ext.
data: lt_prd_cat type comt_prod_cat_rel_tab,
 ls_prd_cat type comt_prod_cat_rel,
 lt_cat_frg type comt_prcat_frag_rel_tab,
 ls_cat_frg type comt_prcat_frag_rel,
 lt_settype_guid type comt_frgtypeguid_tab,
 ls_settype_guid type comt_frgtype_guid,
 lt_settype type comt_frgtype_tab_ext.
refresh et_extension.
read categories assigned to product
call function 'COM_PROD_CAT_REL_READ_WITH_PR'
 exporting
 iv_product_guid = iv_product_guid
 importing
 et_set = lt_prd_cat.
loop at lt_prd_cat into ls_prd_cat.
read allowed settypes for categories
 call function 'COM_PRCAT_FRAG_REL_READ'
 exporting
 iv_category_guid = ls_prd_cat-category_guid
 importing
 et_prcat_frag_rel = lt_cat_frg
 exceptions
 wrong_call = 1
 others = 2.
 check sy-subrc = 0.
 refresh lt_settype_guid.
 loop at lt_cat_frg into ls_cat_frg.
 ls_settype_guid = ls_cat_frg-frgtype_guid.
 append ls_settype_guid to lt_settype_guid.
 endloop.
read settype defintions
 call function 'COM_SETTYPE_READ_MULTIPLE'
 exporting
 it_settype_guid = lt_settype_guid
 importing
 et_settype = lt_settype
 exceptions
 nothing_found = 1
 others = 2.
 if sy-subrc = 0.
 only settypes
 et_settype[] = lt_settype[].
 delete et_settype[] where
 ( prod_comp_type = gc_prod_comp_type-extension or
 prod_comp_type = gc_prod_comp_type-simple_extension ).
 only extensions
 delete lt_settype[] where
 ( prod_comp_type ne gc_prod_comp_type-extension and
 prod_comp_type ne gc_prod_comp_type-simple_extension ).
 et_extension[] = lt_settype[].
 endif.
endloop. " end of product categories
endform. " load_extensions
*& Form delete_status
form delete_status
using it_status_guid type comt_prd_status_guid_tab.
data:
 lt_status like crm_jsto_pre occurs 0,
 ls_status type crm_jsto_pre,
 ls_status_guid type crmt_object_guid.
loop at it_status_guid into ls_status_guid.
 ls_status-objnr = ls_status_guid.
 append ls_status to lt_status.
endloop.
call function 'CRM_STATUS_DELETE_MULTI'
 tables
 objnr_table = lt_status.
endform. " delete_status
*& Form delete_favorites
form delete_favorites
 using iv_product_guid type comt_product_guid.
call function 'COM_PRODUCT_DELETE_FAVORITES'
 exporting
 iv_object_guid = iv_product_guid.
endform. " delete_favorites
*& Form delete_clear_case
form delete_clear_case
 using iv_product_guid type comt_product_guid.
data: ls_customizing type comc_product,
 lv_clear_case_guid type comt_clear_case_guid.
Is cusotmizing-flag INACTIV_PROD activated ?
call method cl_com_product_general=>comc_product_read_all
 importing
 es_prod_general = ls_customizing
 exceptions
 not_found = 1
 others = 2.
check ls_customizing-inactive_prod = on.
select single clear_case_guid from comm_clear_targ "#EC *
 into lv_clear_case_guid
 where object_guid = iv_product_guid "active
 and object_class = 'PROD'.
normaly two entries for active and inaktive product version
delete from comm_clear_targ
 where clear_case_guid = lv_clear_case_guid
 and object_class = 'PROD'.
delete from comm_clear_stack
 where guid = lv_clear_case_guid
 and application = 'PROD'.
endform. "delete_clear_case
*& Form check_usages
form check_usage
 using iv_product_guid type comt_product_guid
changing ev_delete type comt_boolean.
include sbal_constants.
data: cv_function_module like rs38l-name
 value 'COM_PRODUCT_USAGE_CHECK'. "#EC NOTEXT
data: ls_product type comt_product,
 lt_product type comt_product_tab.
data: ls_logheader type bal_s_log, "Kopfdaten des Protokolls
 lv_loghandle type balloghndl.
data: ls_msg_filter type bal_s_mfil,
 ls_log_filter type bal_s_lfil,
 lt_msg_handle type bal_t_msgh,
 ls_log_handle type bal_s_logh,
 ls_msg_handle type balmsghndl,
 ls_msg type bal_s_msg,
 ls_string type string.
does CRM function exist
call function 'FUNCTION_EXISTS'
 exporting
 funcname = cv_function_module
 exceptions
 function_not_exist = 1
 others = 2.
check sy-subrc = 0.
create log handle
ls_logheader-aldate = sy-datum.
ls_logheader-altime = sy-uzeit - 10.
ls_logheader-aluser = sy-uname.
ls_logheader-alprog = sy-repid.
call function 'BAL_LOG_CREATE'
 exporting
 i_s_log = ls_logheader
 importing
 e_log_handle = lv_loghandle
 exceptions
 log_header_inconsistent = 1
 others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ls_product-product_guid = iv_product_guid.
append ls_product to lt_product.
call usage checks
call function cv_function_module
 exporting
 it_product = lt_product
 iv_loghandle = lv_loghandle.
filter settings
ls_log_handle-sign = 'I'.
ls_log_handle-option = 'EQ'.
ls_log_handle-low = lv_loghandle.
append ls_log_handle to ls_log_filter-log_handle.
get messages
call function 'BAL_GLB_SEARCH_MSG'
 exporting
 i_s_log_filter = ls_log_filter
 i_s_msg_filter = ls_msg_filter
 importing
 e_t_msg_handle = lt_msg_handle
 exceptions
 msg_not_found = 1
 others = 2.
check sy-subrc = 0.
ev_delete = space.
write: / text-001, text-008.
read messages
loop at lt_msg_handle into ls_msg_handle.
 call function 'BAL_LOG_MSG_READ'
 exporting
 i_s_msg_handle = ls_msg_handle
 importing
 e_s_msg = ls_msg
 exceptions
 log_not_found = 1
 msg_not_found = 2
 others = 3.
 check sy-subrc = 0.
 message id ls_msg-msgid type ls_msg-msgty number ls_msg-msgno
 with ls_msg-msgv1 ls_msg-msgv2 ls_msg-msgv3 ls_msg-msgv4
 into ls_string.
 write: /, ls_string.
 clear ls_msg.
endloop.
endform. " check_usages
*& Form delete_ibasecomponent
 text
 -->P_GV_PRODUCT_GUID text
form delete_ibasecomponent using p_product_guid.
data: lv_guid22 like sysuuid-c22,
 ls_comp type ibas_dat1.
tables: ibin.
break pvho.
call function 'GUID_CONVERT'
 exporting
 iv_guid_x16 = p_product_guid
 importing
 ev_guid_c22 = lv_guid22
 exceptions
 no_unicode_support_yet = 1
 parameters_error = 2
 others = 3.
find the component
select * from ibin
 where objnr = lv_guid22.
 clear ls_comp.
 ls_comp-instance = ibin-instance.
 ls_comp-ibase = ibin-ibase.
 call function 'IBASE_COMP_DELETE'
 exporting
 i_comp = ls_comp
 exceptions
 data_not_consistent = 1
 ibase_locked = 2
 not_succesful = 3
 others = 4.
 if sy-subrc eq 0.
 call function 'IBASE_SAVE'.
 endif.
endselect.
endform. " delete_ibasecomponent

Pricing: New condition type not getting listed in options in product master

Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

Hi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael

Transfer material type DIEN in ECC system to CRM product type Service

Hi Experts,
I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
How can we do this?

Hi Viswanath,
   I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
   Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
       Customer Relationship Management -->
             Master Data -->
                    Products -->
                        Settings for Product Type -->
                                Allow Upload for a Product Type.
   Now here select the check box for product type 02(service).
To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
         Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
//Bhanu

Documents in product master

Hi,
I'm writing an extension to the product catalog on ISA B2B to add some extra links into custom JSP pages from the catalog items.
On the CRM system, my functional people have set up a document (specifically a URL) against relevant products, on the documents tab of the product master. I need to be able to check if a given product has this document assigned to it and if so, pass it back to my Java in the B2B application. To do so I am writing a BAPI to be called from the Java on the CRM system.
What I can't find is an easy way to see what documents are created against a given product. Does anyone know of a class/function module I can use that would return me the documents for a given product if I supplied either the material number or the GUID?
Thanks.

Gareth,
Try class CL_CRM_DOCUMENTS. There is a static method called GET_INFO which will return a list of documents for the business object. It has been a long while since I used this class, but this will definitely return what you will need.
The Business Ojbect will need to be filled with the following
INSTID - <Product Guid>
TYPE - 'BUS1178'
CA - BO
The resulting LOIOS, PHIOS table will contain the documents that are linked to the product master.
This technique will work with all business objects using CRM document management. Once you have this data you can also use the method GET_DOCUMENT to actually retrieve the physical document if desired.
Good Luck,
Stephen

Document Tab page in Product Master(commpr01)?

Hello CRM Gurus,
I wolud like to know in which business context the Document Tab Page used in creation of Product Master.
I see that i can attach any Document at my wish.of formats .doc,.xls,.pdf etc.
But why is it given.?
If i am creating an IP(Intellectual Property say a Movie Title)
what can i attach or upload ?what is the business requirement?
please clarify
Thanks
Arshad

Hi Arshad,
Document Tab is nothing more then a Informaton storage Point of location.
For Ex; Say a company for which you are Implementing Deals with Product like Boilers, Lights etc.
IF there are mtuliple of choices and infomation related to eachd evice they can store those information in document tab.
Information like Pictures, Some Text Description message.
Document tab over here is also the same as you have in Activity, Opportunity Transaction.
And in that we call them as Long Text storage Areas, so same rule Implies for products Document Tab as well.
Hope this helps.

Crm product master

Similar Messages

Maybe you are looking for