Pricing: New condition type not getting listed in options in product master
Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM
Hi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael
Similar Messages
-
VA00 condition type not getting determined for the returns order
Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputsHi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O -
Pricing Error- Condition type not found.
Hi Gurus,
I have a issue with pricing.
Scenario :
For a pricing procedure i have 3 condition types ;
For example :
ZXED, ZXE1 & ZXE2.
Of these ZXED is Manual, Mandatory & Statistical in nature.
ZXE1 & ZXE2 are Manual.
When i create a sales order my pricing procedure is getting determined correctly.
The issue comes in when i try to key in the values at the item level condition in the sales order:
If i see the options(F4) available for me to select the condition types i get have see only one condition type i.e ZXE1. but esentially i should get to see all the 3 condition types as an choice of code(condition type).
Can any one help me to find out the possible reason why i get to have only one condition type for selection.
Your suggestion is highly appreciable.
Rgd
VIVEK.Hi,
1. Understand onething that a particular condition type if maintained "mandatory" in the pricing procedure then you will have to create the condition record for it using transaction code <b>"VK11"</b>. If it is manual then you can give the rate directly in the sales order after selecting it. Since you have maintained <b>"manual", "mandatory" & "statistical"</b> for the condition type <b>"ZXED"</b> at the same time that is why the system is giving you the error <b>"Pricing error" Mandatory condition ZXED is missing."</b>
2. Also you want the system to show you all threee condition types <b>"ZXED', "ZXE1", "ZXE2"</b> to choose manually as per your requirement. Do one thing go to transaction code <b>"V/06"</b> - select the required condition type say <b>"ZXED"</b> - double click on it - in the <b>"changes which can be made"</b> section you will see a field for <b>"Manual entries"</b> - in this select <b>"no limitations"</b> and save the <b>condition type</b>. Similarly do it for the other 2 condition types and save it.
<b>I tell you</b> you must have maintained there <b>"D-not possible to process manually"</b>. If this is maintained then the system will never show you the condition type to choose from the condition type list in the sales order.
Note: You have maintained for <b>"ZXED"</b> manual/mandatory/statistical. Now as it is mandatory also you have to maintain the condition record for it in <b>"VK11"</b>. Now if you change the rate of this condition type in the sales order then when you will create the invoice in <b>"VF01"</b> the system will show that value only which has been maintained using <b>"VK11"</b> because in billing also the system fetches the condition record from <b>VK11</b> for the mandatory conditions.
Hope this clarifies and solves your doubt.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil -
Statistical condition types not getting displayed in invoice
We have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
Thanks & regards
Puneet AgrawalHi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji -
VPRS condition type not getting computed while retro billing.
Dear All,
I have an issue while generation of Reto billing using the T.Code : VFRB.While running VFRB the values are getting computed correctly and the supplimentary debit / credit note gets created.
But the values for the condition type VPRS is not getting computed and getting transfered to CO-PA.
On pricing analysis agaist VPRS i am getting the message (Condition ignored (requirement 004 not fulfilled)).
The Item category used is TAN and the Determine cost Indicator is marked.Also while doing a sales invoice the VPRS condition type is getting computed and the value is posted in CO - PA.
What would be the reason for the error .Could some one suggest a solution .Kindlye help.
Regards,
K.VivekHello vivek,
this is usually caused by userexit. Please check userexit_pricing_prepare_tkomp userexit_number_range using in rv60afzz.
Best regards,
Ivano. -
NAVM condition type not getting updated in PO with account assignment K
Hi Sap Gurus
Pls help me resolving this issue
We had created a PO (K-Acc Assignment) with certain tax percentage (16%) in the past .When we view the PO in display mode we can see the equivalent value of 16% being appearing in NAVM at item level.Further on when we hit the Invoice TAB and try to view the taxes.We can see the net price being updated in BASB condition type,and the equivalent value of 16% being updated in AP1I.
This looks to be perfect but when we again go back to he same PO screen from Tax Screen the value that had intially appeared in NAVM(equivalent of 16 tax%) becomes zero.This happens so for the old PO.
But for new PO nothing is appearing in NAVM condition tab in PO item level,inspite of the fact that some tax percentage has been maintained.Again this tax percentage can be viewed from Invoice TAB and it takes part in the calcualtion updating th AP!I key mentioned earlier.SOme changes have been made in the config due to which all new POs being created now as no value being updated in NAVM tab inspite of maintaining the tax percentage.
All other std settings have been used.
Additional info:
In the pricing procedure from FICO side..for the condition type AP1I accrual key NAV is used.
It has the access seq MWST.
cond class,claculatio type,cond category for AP1I being: Taxes,percentage,Tax respectively
AP1I is not marked as statistical.
NAVM has no acess seq.
cond class,claculatio type,cond category for AP1I being: Taxes,Fixed amount,Input Tax not deductible(N) respectively.
NAVM is marked as statistcal
pls give me some leads so as to identify why the value does not appear in NAVM condition typesystem wont generate any controlling document for noted items downpayment and normal payments.
Because all are balance sheet accounts. Controlling documents will generated for only P&L accounts.
Your analysis correct. -
Condition type not getting populated at first line item of Sales order
Hi Experts,
We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
Let us know there are any other possible ways to find the same
please help.
Thanks!Hi Rajani,
check the user exit in the FM..IDOC_INPUT_ORDERS
check if any filters kept for condition type field..
check the belwo user eixuts
ORDCHG I VEDB0001 Sales Ord. Change
ORDERS I VEDA0001 Sales Orders..
Regards,
Prabhudas -
Condition types not getting displayed
i have uploaded a smartform & copied the standard program(/SMB40/FM06P) of it into my system.the condition type texts & their amounts are getting displayed for import purchase order(conditions are getting picked from me22n--->conditions) but for domestic invoice im unable to display condition type texts & their amounts.(these are picked from me22n-->invoice---->taxes).
in program lines this code exists.
<FS> like EKPO.
<KO> like KOMV.
input parameters output parameters
ZXEKKO G_KSCHL
L_NETWR G_VTEXT
<KO> G_KWERT
G_VTEXT G_FRAKWERT
G_FRAKWERT G_TAX
G_TOTAL
<FS>
G_TAX
L_KWERT
CLEAR: g_vtext,g_kwert,l_kwert.
CHECK NOT <ko>-kwert = <fs>-netwr.
Get Condition Type Text from table T685T and the value
SELECT SINGLE vtext INTO g_vtext FROM t685t
WHERE spras = sy-langu
AND kschl = <ko>-kschl.
IF sy-subrc = 0.
MOVE <ko>-kwert TO g_kwert.
ENDIF.
Check document currency
IF NOT l_netwr IS INITIAL.
WRITE g_kwert TO l_kwert CURRENCY zxekko-waers.
ENDIF.
*Determine if the discount is based on %
IF g_vtext CS '%' OR
g_vtext CS 'percentage' OR
<ko>-kschl = 'SKTO'.
<ko>-kbetr = <ko>-kbetr / 10.
MOVE '%' TO <ko>-waers.
ENDIF.
Determine Tax
IF g_vtext CS 'tax'.
ADD <ko>-kwert TO g_tax.
CLEAR g_kwert.
ENDIF.
Determine Freight Charges
IF g_vtext CS 'Freight'.
ADD: <ko>-kwert TO g_frakwert.
CLEAR g_kwert.
ENDIF.
i feel the data is coming from above code only.please suggest where i have to make changes so that it picks data from ME22N->INVOICE--->TAXES which has conditions for domestic purchase order.please help.Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji -
ORDERS Inbound EDI1 Condition type not getting updated
Hi Experts,
As per the client requirement, during ORDERS Inbound process we need to capture the "Customer expected Price" in EDI1 Condition type in the sales order. So we maintained the details in the E1EDP01 in field VPREI.
But during ORDERS Inbound process this EDI1 field is not getting updated. Can anyone please help us on this.
Warm Regards,
VELProblem of our ABAP coding distrubed the std functionality. In std SAP, this functionality will work without any issue.
-
Hello All,
I am using COPY CONTROL to create contract through VA41.
Problem i am facing is condition type not getting picked up at item level, though correct pricing procedure is getting determined. In that pricing procedure this condtion type is maintained but still it is not picking the condition type.
RushikeshHi,
Can you check condition type detailed screen"Manual entries" field,the value in that field is either B or D.
Regards,
Chandra -
KONV not getting updated with new condition type value
Hi,
I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
Thanks
ShwetaHi Vasu,
It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
Thanks,
Shweta -
An error occured while creating the new dataset Could not get type informat
Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar -
New Condition type for pricing
Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong -
HM00 -Condition type not present in pricing procedure.
I have included HM00 as manual condition type in pricing procedure attached to the sales order through prcing procedure detrmination. But in sales order when I am entering the value manually for HM00, the error is "HM00 -Condition type not present in pricing procedure", but actually it is present in pricing procedure.
Any idea how to fix thie problem ?Hi Sunil,
Just check in V/08 > <b>YOUR</b> pricing procedure and see if HM00 is included in it or not.
Hope this will definitely solve your issue
Reward suitably
Regards
SD -
Condition type not determine in sales order
I have condition record maintained for the condition type as per the order reason. When I create the sales order system is not reading the condition record so no condition type is getting determined. Pricing date from the sales order is within the validity period of condition record.Parmeters are also matching but still in the sales order condition type is not getting determine.
Thanx
PNUIn that case, do update of pricing.
To do that, Sales Order - Item data - Condition Tab - Click Update button and choose option B - Carry out new pricing.
To know who manually remove this.
Choose Enviroment from menu bar in sales order - choose Change for display of change in the doc.
Regards
JP
Maybe you are looking for
-
[GeForce PCe] MSI NX6600GT PCi-e ?
Hi there, I have 2 MSI NX6600GT 128 running in SLi mode. When I goto use MSI Turbo Experience it comes up with a screen that says: "MSIVGA.ocx initialization error". I have 71.84 drivers and all other drivers are installed. It also happened
-
I have a password that used an installed keyboard and after installing ios7 I am not able to unlock my phone because the keyboard I used is not showing up. Is there a way I can unlock the phone without having to do a reset?
-
Drag and drop .webloc to desktop - placement question
Using an iMac with a secondary display... General: • What governs the location of an item dragged-and-dropped on to the desktop? • Is this user-modifiable? Specific: While doing research, browsing the Web, I routinely save links by dragging the favic
-
To launch SDM tool - using user id other than sapsid adm
Hi, Currently, when we perform deployment using SDM we login as <sapsid>adm to launch the SDM tools (at the central server instance running under UNIX). However, we would like to restrict the usage of the <sapsid>adm due to concern that this id is po
-
Reg two events at a time at backend
Hi all, I have a requirement as follows: In layout I have a dropdown and a tableview. Now at backend when the events are getting processed, I want to process two events, if i write code for dropdown at first and in screen if i choose to select a rec