Cross-client activation issue with LBWE

Hi,
I am running into the same problem as the following links:
Problem with setup table fillup
Cross-client problem
We have the configuration client 300 and the loading client 310. The structures in client 100 are active but are inactive in client 310. The first link says that I have to go into LBWE in the loading client to activate the structures, but I have the same issue relating to the second link. This is happening in the DEV system.
Is the fix for the second issue relating to Basis who would allow me to do the activation on the loading client - opening the system for me to activate? Or is it the Developer's issue to find the workaround?
I don't see why the restriction on the configuration for DEV client systems. This is for BW related Configuration issues and nothing is relating to SAP Business Configuration that had to be so restricted.
Please advise how to get the inactive structures to be active in the loading client.
Thanks

Hi,
It is a very common issue. You can solve it by logging in to 310 client, going to SCC1 transaction and replicating changes from the transport orders that you created in the other DEV client.
It's like transporting from one DEV client to the other, but please note that the request does not need to be released.
I hope this helps.
Best regards,
Maximiliano Ariel López

Similar Messages

10.2.8 client login issues with 10.3.9 server

Hi we have just updated our computer lab to 10.2.8 client computers and a 10.3.9 server but I am having issues with the client computer loging into the server I am using LDAPv3 and when I try to have a user login to the server from the client at the login screen I get the login window shake.I can login fine from a 10.3.9 client computer.Any advice would be appreciated.Thanks in advance

Check your 10.2.8 machines Directory Access and make sure LdapV2 is not checked and also that Ldap V3 is checked and configured correctly. I found that if I had both Ldapv2 and v3 on my 10.2.8 clients could not log in. 10.3 clients only have the option for Ldap V3, so it is not an issue.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Lync internal clients have issues with external meetings

We have a pretty easy Lync setup in our company, 2 FE servers in a Enterprise pool, one Edge server (in a pool. we will add edge servers later) and a Reverse proxy (Databases on a SQL server of course). Everything seems to be working well internally. We
have not deployed Enterprise voice yet but that is coming later. Our issue is when our internal clients try to join a meeting from another company. They can join the meeting and IM but as soon as they try to start Voice, they get kicked out of the call. Internal
meetings work fine with voice and video. They can join the meeting using Lync Web App but that is not a satisfactory solution for this. The company that hosted the meeting said users from other companies can join with the lync client without issue. I am a
remote employee and I can join using audio and video from my home. I have tried tracing the issue with the lync client logs but they make little sense to me. My question is, how does the information flow from internal clients to an external meeting> Is
it through the AV service in the Edge?
We have opened the firewalls wide open as a test (closed again of course) and it does not seem to be a firewall issue. Can anyone point me in the right direction?

To both of you, thanks but the articles do not help me. We can host meetings in our Lync 2013 organization without issue and it seems that others from outside can join with either Lync client or LWA. Our remote users connect via Lync client without a VPN
and have no issues with IM, Audio, video or sharing. The issue is connecting to another companies Lync meeting from inside our network. You can connect but as soon as you try to enable audio, you get kicked out. I have seen another post that describes the
issue but there is no solution there either. As I said in the original post, we ran a test where we temporarily opened both the internal and external firewalls wide open for the Edge and Reverse Proxy servers and it had no effect whatsoever so I conclude it
probably is not a firewall issue. Since Edwin verified what I believed in that the communication from the internal clients does go through our companies Edge server when joining a meeting with another company, it leads me to believe that this is
a setup issue with the Edge server but I have followed the setup documents and nothing seems out of place. Our edge server is a virtual server. I am wondering if this could be related to it or maybe this is just the way things are. Can anyone
tell me that their internal users can join a meeting hosted by another company? We have open federation setup at this time and since the company that hosted the meeting claims to have had users from other companies in meetings without issue, I assume their
SRV records work.

10.6 Server, 10.8 Clients (ML) issues with Contacts & Mail

I'm seeing issues with Mail in ML and contacts and our 10.6 server. All users are on a network home directories and using the Address Book service on the server. Mail and Contacts fail/work intermintently when both of them are running. Stopping and restarting either program may solve the problem.
Users of 10.7 clients see no issues. Only users of 10.8 ML have problems with Mail and Contacts. Its very obvious that Contacts and Mail are having issues with each other. I can remove the contents of the Address Book in the local user's library and and relaunch Contacts to run with out problems. As soon as you start Mail problems arise quickly.
While Mail is accessing the address database it will demonstrate long delays.
Any direction or help is much appreciated!

This is a known bug of ML. The operating system is not compatible with AFP home directories. You will notice that FaceTime won't work either. In addition, there are sandbox problems, preferences problems and performance issues.
In my experience, the only possible workaround is to convert all forks and Extended Attributes in the home directories to AppleDouble files and then switch from AFP to NFS. This can result in Spotlight issues, but otherwise, all applications will work fine and much faster.

Offline Activation issues with Office 2010 Professional Plus

I have a volume license for 17 seats for MS Office 2010 Professional Plus, along with a MSDN license which authorizes us to have 50 seats.
I have activated the software offlline via the telephone. After about six months the licenses go inactive and requires me to reactivate the product again. This has happened serveral times.
The network consisting of three servers: One Domain Controller, two member servers one of which has Exchange 2010 and the other is the endpoint management secrutiy server. There are 17 clients with windows 7. The network does
not connect to the web.
I have been on the phone with support but the level of the help desk has not been very informative. In the 90 minutes that I was on the phone, I was directed to go to various websites, i.e. volume licensing ... these sites were not
helpful. Toward the end of the phone support I was finally transferred to a U.S. representative. This individual stated that I would need to have a support contract in place prior to recieving help for a product that should install and be activated without
an issue.
I do not have a KMS, I'm completely isolated from the Internet and would like some direction on this matter.
/r
Mitch Page
ISSM
CISSP

Hi, this is a public/community forum, not an official support channel, but we can try to help you.
VL editions of Office can be activated by either KMS product key (the default pre-embedded key) or by MAK product key.
KMS doesn't require any kind of web connection at any time (you could activate your KMS host by telephone activation. Your KMS clients then contact your KMShost only, via your internal network. No internet connection is needed)
Or, you can use MAK. MAK requires you to "install" your CSVLK product key in each computer (overwriting the pre-embedded KMSclient pkey) and then activate each computer. You can activate MAK installations via internet or telephone.
Typically, once an MAK pkey is activated, it remains activated, unless the computer is subjected to "hardware changes" or some form of data restore or recovery.
Although you don't have KMS implemented, you do seem to have enough computers (the minimum is 5) to consider KMS.
6 months is an interesting milestone. 180 days is exactly the timeframe for a KMSclient to become unlicensed if it been unable to contact a KMShost.
Perhaps you could check the current licensing configuration/status on a couple of computers, to confirm their current situation?
- on a computer, open an elevated (run as admin) CMD console
- execute: cd \Program Files (x86)\Microsoft Office\Office14
(or on a 32bit OS, execute: cd \Program Files\Microsoft Office\Office14
- execute: cscript ospp.vbs /dstatusall > c:\osppOUT.txt
This will produce the text file, showing all *possible* Office licenses, and the currently installed one should show as "Licensed".
You can post the results back here for us to review for you. (there is only a partial pkey displayed, so nothing sensitive will be revealed)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Cross Domain Connection Issues with Test Controller

I am having trouble resolving a problem I have connecting a build agent with the test controller in a cross domain environment. I have purged out the actual machine names, domain names, and IP addresses just in case that is a security concern.
Situation is this:
All machines are running Visual Studio 2013
Test controller/agents are on Windows Server 2012 R2
Test controller is installed as stand-alone in order to be able to do load testing, as well as API and CodedUI.
Build definition in TFS kicks off the automation using testsettings file to point to build controller
Application under test uses resources in the ABC.XYZ domain. Test agents need to be in ABC.XYZ in order to test application E2E.
TFS is in Main.corp.company.com domain.
Test controller is a dual-homed box in corp.company.com and ABC.XYZ domains. It are accessible from Main using the corp.company.com NIC.
All our dual homed boxes are set up this way. Dual homed with Main and ABC directly is considered a security violation.
From the dual homed box, logged in with my ABC credentials, I can access TFS in Main using my Main credentials.
Manually, I can successfully kick off a test run from a command line from a VM in ABC.
Build controller and build agents are in Main.corp.company.com.
Build controller can successfully connect to build agent, and build agent successfully builds the automation.
Build agent fails to connect to build controller:
Failed to queue test run 'buildagent@MachineOne 2014-08-12 12:35:34_Any CPU_Debug': No such host is known
I can ping the build controller from the test agent, and I can successfully query port 6901:
Querying target system called:
testcontroller.corp.company.com
Attempting to resolve name to IP address...
Name resolved to 10.10.10.111
TCP port 6901 (unknown service): LISTENING
Firewall is turned off on the test controller. Even if it wasn’t, the relevant rules allowing port 6901 and File and Printer Sharing are created.
Local Security Policy | Security Options | Network access: Sharing & security model = classic
NETBIOS names of the test agents and build agent are set in the test controller’s hosts file (they were pingable without this anyway)
NETBIOS name of the test controller is set in the test agent’s hosts file (it was pingable without this anyway)
Tried both simple NETBIOS name and FSDN for test controller in testsettings file
Considering installing a build agent on the same machine as the test controller, but suspect that would just move my communication problem to build controller : build agent
Considering moving test controller to Main and making the four test agents dual-homed, but there is a concern to limit the number of dual-homed boxes, and also suspect that would again just move the communication problem.
I can use netstat to verify that the service is listening to port 6901 on both NICs:
TCP 0.0.0.0:6901 0.0.0.0:0 LISTENING 6536
TCP [::]:6901 [::]:0 LISTENING
6536
(PID 6536 is the QTController.exe)
However the VSTTController.log only mentions listening to the ABC NIC. Since the connection to the ABC test agents works, that makes sense.
When I open the testsettings file on my laptop in the Main domain and examine the server name, there is a warning that the host cannot be found. When I open it on a VM in the ABC domain I am able to manage the test controller and view all the test
agents. However, if I try to restart the build controller I get an access denied error. Not sure if that is related in some way.
I am using a ABC domain service account to run the test agent sevice. There is a Main domain service account running the build. Both service accounts are administrators on the test controller and in the TeatTestControllerAdmins and TeatTestControllerUsers
groups. The test agent service account is also in the TeamTestAgentService group.
I tried to create a port proxy to forward requests from the Main facing NIC to the port on the ABC facing NIC:
netsh interface portproxy add v4tov4 listenport=6901 listenaddress=10.10.10.111 connectport=6901 connectaddress=10.20.20.222
This almost worked. I could see with netstat commands that the port was opened and a connection was established with the build agent, however after a long wait it hit an error that it couldn’t find the ABC NIC:
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.20.20.222:6901
So apparently the ABC IP is getting forwarded back to the test agent, which then of course can’t use it.
I am running out of ideas to try. Not sure where the problem is:
Cross-domain issue between Main.corp.company.com and corp.company.com? Or,
Problem with the test controller not being able to listen on more than one NIC?
I know I am not the first person to try to set up something cross domain. Most of the troubleshooting suggestions I have been able to bing have been about fixing connections between test controller and test agents, which isn’t the problem here.
Is this set up just so far from standard that VS can’t handle it?
Thanks in advance,
Gary

Hi Gary,
Thank you for posting in the MSDN forum.
>> Build agent fails to connect to build controller: Failed to queue test run 'buildagent@MachineOne 2014-08-12 12:35:34_Any CPU_Debug': No such host is known
>> I know I am not the first person to try to set up something cross domain. Most of the troubleshooting suggestions I have been able to bing have been about fixing connections between test controller and test
agents, which isn’t the problem here.
Just to make this issue clearly, you mean that it is not the Test Controller and Test Agent issue, am I right?
As you said that it is related to the Build controller and build Agent, am I right?
If it is related to the Build Controller and Build Agent, I suggest you post this issue to the TFS forum, there you would get dedicated support.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vstfs&filter=alltypes&sort=lastpostdesc
If there's any concern, please feel free to let me know.
Sincerely,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

10.1.3.3 JDev web service client proxy: Issue with XSD:anySimpleType

Hi,
One of our Web services XSD elementss has "anySimpleType" as the type:
<xsd:element name="Value" type="xsd:anySimpleType" minOccurs="0" nillable="true"/>
The client proxy is generated using JDev 10.1.3.3. We observed that the corresponding Java object is created with "String" data type:
protected java.lang.String value;
exp.setValue("100");
We need to be able to pass arguments with other simple types as well (E.g. Decimal). We tried changing the auto generated code, but weren't successful.
Any pointers in this regard are much appreciated.
Thanks,
Phani

Hi all,
can anyone please respond to my issue. Its sort of urgent.
thanks,

Activation issue with new Adobe form in subsequent systems

Hi All,
I'm facing an strange issue in activating Adobe form.
The new Adobe form is copied from an existing form and assigned to a new output type of PO.
After tested successfully in Dev, we transport it to Q environment and other subsequent systems
But we will always get PO updating termincation error in Q and other systems firstly.
We go to SFP transaction and regenerated the Form there once, only after that it works perfectly and no termination error any more.
I'm not sure if I missed any step to activate the Adobe form as this is the 1st time I'm working on a new Adobe form.
I did activate the Adobe interface and form before releasing and TR consistency check was also carried.
Please let me kow if you faced the similar issue and what's the possible cause?
Thanks for your inputs.
Regards
Vindy

not really, someone else mentioned that it could be done and they said they saw it before. I've been beating myself up for a while trying to figure out how to get it to happen. Is there an easy way to get the content of the pdf form into an email body with plain text when pressing a submit by email button?
Such as...
<label name>: <txtfield content>
First name: <txtfield content>
...etc..

FlexConnect AP Deployment- Clients having issues with DHCP

I have 7 2602I access points deployed and operating in FlexConnect. We are doing both local switching and local authentication. These AP's are in a FlexConnect Group with local Radius server defined as the primary server in the Flex Group. This has been working for a few days. The vlan these users are getting DHCP is local and there is a local DHCP server. There is also a backup DHCP server at the central site.
We are beginning to get reports of users having problems connecitng to wireless. Authentications asre successful, but when I look at the WLC, I notice they are not getting an IP address. They either show 0.0.0.0, or the default address 169.254.12.2. Some are connecting, and some do not. This issue is very intermittent. I will also add, this location does have periods of high latency, hence the reason we are doing local switching/local auth. This client eventually got an IP address, but it took a while.
We never had any issues unitl we deployed in Flex mode. I could switch these Ap's back to local mode(central switch/central auth) and this problem would never occur. Any ideas? Thanks.

I agree that in local auth mode the WLC does not learn as much info, but if you check learn IP address under the WLAN it will learn it and can be seen from monitor clients.
Although authentications are successful, I have not ruled out some sort of local auth issue.
One other thing to note, we got a debug client and the first dhcp request went to the local dhcp server, then a request to the backup dhcp at HQ. however the dhcp request was fulfilled by the local dhcp server. The local server appears to be working correctly, and there are plenty of addresses available.
Sent from Cisco Technical Support iPhone App

Activation issues with older software, CS2

since i couldn't find a way to get kai's power tools to work with my copy of CS6, i decided to boot up an older mac running OSX 10.4 to run my copy of CS2. my old mac has been offline so long i needed to reactivate my copy of CS2, but it requires a new activation code.
what i get is this:
"Activation Server Unavailable"
"Activation was unsuccessful because the activation server is not available at this time. Please do one of the following:
-Click the Retry button
-Click the Cancel button...
-Click the Phone Activation button to activate your product over the phone"
"Error code 24:24"
i've already gone and downloaded everything adobe told me to download but that didn't help. all i want is a way to reactivate the suite i already have, not reinstall a whole new suite, at least, not if i can help it...
Please help!!

https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

New implementation - Client having issues with RAC and Grid on Windows

Client is starting a new implmenetation on Windows 2008 R1, Oracle 11.1.0.7. They have a 3 node RAC and Grid Control. They are having a number of issues and support is working through those issues. They are asking if there are clients on RAC and Grid on Windows. The Wiki shows a few customers on Windows, but was hoping to get some feedback. Tks.

There are lots of customer applications that are based on Windows RAC. And as mentioned above, it is very well supported by Oracle.
However, because of the security vulnerabilities of Windows, I've observed that most of the financial institutions and listed companies opt for unix based servers for all high profile applications and run only low to medium risk application on Windows.
Regarding maintanence issues, I guess it's going to be pretty much the same; there shall always be lots of bugs, lots of patches and updates just like an yother software; doesn't really matter if you are on Unix or Windows systems. As long as you purchase support, it's all good.
It's pretty much same concern regarding Grid Control on windows.
Cheers.

Cross-client material transfer with conversion.

Hi....
I have a problem to solve....i am supposed to transfer material data from client 040 to 041 with conversions. I am thinking to do it by ALE. what conversions i am supposed to perform is not yet decided by project manager so as ALE is not very flexibe in certain areas...is it worthy to use ALE and what would be another way to carry out this task... please help me in this problem...any article or suggestion will be great help of mine....thanking you,,,,

Hi!
? Strange. At least not easy. Do you speak about a development system? Maybe you just make a client copy and some hard database changes. Won't be OK, but if you just need some data for a performance test, this could do.
Test for a migration? Try to stay as close to the final way as possible.
You might save the outbound IDOC into a file, make some search and replace (in easy cases even in an editor) and upload the file for inbound IDOC. Also a report for file conversion can be used.
User-exits for IDOC segment changes might be possible, but doesn't look like a good idea (one-time special rules, but coding for all the time and everywhere).
Direct table copy is out of scope (e.g. because of internal number ranges).
LSMW might be an option, too. As input file you could again use outbound IDOC saved as file (with conversions?). Then inbound conversion would be in a transparent and easy to maintain way.
Hope you got some new ideas,
regards,
Christian

SCCM 2012 Client Communication Issue with SCCM 2007

My Clients was installed SCCM 2007 client version but somehow those clients reporting to SCCM 2012 Server
Note : My SCCM 2007 Server still active mode . and the SCCM 2007 client IP boundaries was not added into SCCM 2012 server
But still communicating to SCCM 2012 , what is the root cause ?
Best Regard's Krishna

Either, during the client installation the client was manually assigned to the ConfigMgr 2012 site (by specifying the site code), or during the client installation the client was auto assigned to the ConfigMgr 2012 site (that can only happen when there
is an overlap in the boundaries and that doesn't have to be the same type of boundary).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

IPad 1 activation issue with iOS 5.1 update - any fixes?

Tried to update my iPad 1 over WiFi to iOS 5.1 this morning. I get a message:
"iPad could not be activated because activation servier is termporarily unavailable. Try connecting your iPad to iTunes to activate it, or try again in a couple minutes"
No luck - I've tried all day. When connecting direclty to may iMac, I get an iTunes message stating that it cannot recognize the contents of the iPad and suggests a full factory restore (which I want to avoid unless no other option is available). iTunes does recognize that the iPad has OS 5.1 installed, however. I've tried a few tricks I've seen posted (such as changing the DNS #), but nothing works to "activate" it. I don't ever recall needing to "activate" an iPad with the previous updates - only after initial purchase.
If anyone has the same problem, and has found a fix, I'd appreciate the help. Thanks.

Thanks - I hadn't tried that earlier (had only tried the red slider shutdown). The problem, however, still persists (states activation server is termporarily unavailable).
After two days of not being able to use the iPad, I"m about to break down and try restoring to factory conditions...... I hope that works.

Cross-client activation issue with LBWE

Similar Messages

Maybe you are looking for