Cross Client Customzing - Define Printer
Hello all,
As far as I know, defining a new printer in SAP system is belonging to the cross-client customizing.
But one thing I am confusing about:
I choose 'No changes to Repository and cross-client costuming objs', however I still can create and delete printers.
Can somebody know what happened? If my understanding is wrong, please kindly let me know.
Thanks & Best Regards,
Tong Ning
Hi sir,
Related the configurations (SPAD--Printer) there is no cross client options or client specific options. You can use different printers at different or same locations based on your available resources and can use any printer either it is local/Remote. There is no such options for printer configurations. The options in SCC4 bare only for the foreign and program changes.
See the below links for detailed information and issues regarding the printer configurations.
printer configuration issue
How to Configure Printer in SAP - Basis Corner - SCN Wiki
default printer settings in SAP
Printer Configuration
I think this information will help u.
Regards,
Harsha.
Similar Messages
-
hai
waht is meant by cross client while defining new table?
hav a nice timeHi,
The changes that you make in the ABAP Workbench are placed in the Repository tables of the SAP database. The contents of these tables are known as Repository data or Repository objects. Apart from a few exceptions, the Repository data is cross-client. As with cross-client Customizing, changes to Repository objects affect all clients of an SAP System
Tables which are having MANDT field is called as client dependent tables. Tables which are not having MANDT field is called as client dependent tables.
Client independent
a table/object that is valid for all clients in a system. E.g table SCC4. This table will be the same no matter which client you view it from. If you try to make changes in SCC4, you'll get a popup with a warning that the table is cross client.
Client dependent
a table/object that is only valid for the client it is changed in. E.g the user tables USR*. You have to create users in each client.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore -
Defining printer driver for SAP
hi,
i am trying to define the printer as follows
SA38 run report RSTXSCRP
device type, MODE=IMPORT and rest as default
but i get the error "cross-client custimizing objects are not permitted"
thanksHi,
This is not an error.This is a security setting for the Client..See SCC4 and SE03 to change this option unless this client is not set to production
Regards
Umesh K -
How to create cross-client variant?
Hi Experters:
Can someone tell me how create cross-client variant in ECC6.0?
in 4.6, we can define the client or define cross-client transaction variant,
how to create cross-client variant in ECC6.0?
Regareds,Hi,
In se93 there is a check box cross-client .
The Cross-client switch identifies which transaction variants are cross-client and which are client-specific. If the switch is set, the transaction variant is cross-client. If the switch is not set, the transaction variant is client-specific.
A client-specific transaction variant can only exist in the client where it was created. The field contents of the transaction variant only have to be available in the particular client. A cross-client transaction variant is available in the system regardless of which client is currently active. The field contents of the transaction variant have to be available in all clients.
http://****************/Tutorials/ABAP/TransactionVariant/Create.htm -
Connect mac client to mac printer share across subnets
I need to share printers from a Mac. I need to connect
Mac clients on different subnets to the Mac shared printers. I installed
a Mac mini, connected to printers via HP JetDirect Socket (port 9100), and
shared them. I was able to print from the Mac mini, and connect Mac
clients on the same subnet to the shared printers with Bonjour and print.
I moved the Mac mini to its intended location on another subnet. I
immediately learned that Bonjour does not publish services across
subnets. I could not find documentation on how to connect to a Mac shared
printer across subnets, but I did find some third party documentation (only some incomplete
documentation from Apple) on how to implement DNS-SD Service Discovery. I
enabled DNS-SD and was able to publish the printer shares across subnets, but I
was still unable to connect to the printer shares from a Mac client. I
found some third party documentation (none from Apple) on how to manually connect to a Mac
printer share by specifying the IP address of the server, specifying the CUPS
default IPP protocol, and the print queue name. I was unable to connect
to the shared printers. I receive ping replies from my Mac mini, and port
scan reveals that port 631 for IPP, CUPS default, is open. Printer
sharing is configured so everyone can print. I am able to connect to the Mac
mini with VNC Screen Sharing. I don’t see how this can be a network
issue.
Macs don’t seem to like to connect to our Windows
shared printers because of our PaperCut software, and connecting Mac clients to
Windows printer shares and authentication is beyond the average user,
exacerbated by Macs not behaving the same as Windows when bound to an Active
Directory domain.
I called Apple support, they escalated to Apple Enterprise
support. Apple Enterprise support said they couldn’t help me beyond a
single network with no subnets, but Apple Engineering might be able to solve
the problem for $695.
Why do I need to pay $695 to learn how to connect Mac
clients to Mac shared printers, something that should be easy and intuitive and
have documentation readily available? Windows printer sharing is easy and
intuitive and documentation is readily available, and services are published
across subnets without have to implement DNS-SD.Thank you for your reply. I followed the instructions in the sybaspot.com site and in some of the included references to set up DNS-SD. DNS-SD worked, but I couldn't connect the Mac client to the Mac shared printers.
I also found http://www.papercut.com/products/ng/manual/ch-mac-printing-10-8-9.html#ch-mac-pr inting-10-8-9-sharing-printers.
I expanded my search and found this: http://support.apple.com/kb/PH13940, last modified May 8, 2014. I started work on my project February 2014. Apple Support could have told me about this document.
PH13940 says: "The computers must be on the same local network as your Mac". Apple must not consider multiple subnets one network.
PH13940 says: "Printer sharing is for printers attached directly to your Mac. You don’t need to share network printers, because they are already shared on the network."
Apple must define "network printers" as any printer with a network interface. Microsoft defines network printers as printers shared by another computer. TCP/IP ports are local ports on a Windows computer, so TCP/IP connected printers are local printers that can be shared. Multiple users on a Mac all see the same connected printers. Multiple users on Windows all see the same local printers, but network printer connections can be different for each user.
Apple must not see any value in accounting for printing and assigning the cost to the user or department. We need to account for printing and cannot have any users bypassing the system by printing directly to printers. I have created Access Control lists on the printers to limit connections to the specific IP addresses of our print servers.
The documents about setting up DNS-SD and IPP connections must have assumed USB connected printers on a Mac. The odd thing is that I was able to share a network printer from the Mac mini when the client Mac was on the same subnet. Is PH13940 wrong?
I am Microsoft Certified Systems Engineer 1999 and Apple Certified Technical Coordinator 2013. -
Hi SDN Guru,
Actualy my Customer using 3 Landscape in ECC Systems Dev,Qty, Prd. But in SAP BI using only two Landscape
Dev & Prod.
Actualy Mapping with ECC Dev to BI Dev Sys , But, Unfortunately my management asking please collect the data from ECC QTY to BI Dev.
We have only data's avilable ECC Qty, there is no data in ECC Dev.
My Question is how to collect the data in different Client (or) Cross Client.
*how to connect cross client then how to extract the data from ECC Qty to BI Dev System.
Can you please provide me solution ASAP...
Thanks in Adance Guru's.
Regards,
KumarHi,
You have to map your ECC QUA to BI Dev system.
Communication Setting between BW and R/3
Step 1: Define Logical System in R/3
Step 2: Assigning Logical System to Client
Step 3: Setting Up an RFC Destination
Step 4: Distributing Data Model
Message Types Involved in Process of Data Loading
Step 5: Generating Partner Profile
Step 6: Maintaining Message types in T-Code WE20
Cross check the system mappings in RSLOGSYSMAP table in both systems.
You can search some step by step docs in SDN.......
Regards,
Suman -
Excel sheets with defined print areas to pdf
Hello
I am trying to convert an Excel file with multiple sheets and defined print areas to pdf using Automator. The problem is that the action "Convert Format of Excel Files" prints everything on all sheets (even information outside the defined print areas).
Does anyone have a solution to this?
Thanks!Post what you would like to do in Excel here
http://www.microsoft.com/mac/support -
How to disable Cross client Table Access
Hi All,
i have created a Sand box client and i have set its cross client object value to
"No Changes to repository and cross client customizing objs"
but still users are able to run transactions like SR13 which are cross client tables
please helpHI Zeeshan,
Once u run the Tcode like SR13, the users would be able to enter the Tcode and have a new entry varinat created..but during SAVE the system would sure prompt the message... " Changes to Repository or cross-client Customizing are not allowed. Please press DISPLAY or CANCEL" ..
so the changes would not be saved hence forth and have to be cancelled out..
hope this is what u have been looking for..
Br,
Sri
Award points for helpful answers -
How to create a cross-client table maintenance dialog?
Hello everybody,
I have a client specific table (mandt is the first key field) that should be maintained cross-client: In the table maintenance dialog, I want to change/create/insert values belonging to clients other than the current logon client. Can I do this with a generated maintenace dialog? If yes, how?
Thank you for your help, regards, Kathrin!Hi Kathrin,
I think you can't, you must create your own dialog maintenance program.
They are some program to copy data from client to others .. but never seen any dialog cross client. (or remove the mandt in your key).
Regards
Frédéric -
How to list printers on the client machine to print the documents in ADF
Hi,
I have a requirement to print multiple documents stored on the server. I am trying to find out how to list the printers or get a default printer on the client machine and print the documents using ADF.
Thanks
SukarnaI tried that solution. but I am not getting any printer list.
public void printDocument(ActionEvent actionEvent){
BindingContainer bindings =
BindingContext.getCurrent().getCurrentBindingsEntry();
PrintService[] service = PrintServiceLookup.lookupPrintServices(null, null);
if (service.length == 0){
JOptionPane.showMessageDialog(null, "No Printer Selected");
The printer Service is not returing any data.
Thanks
Sukarna
Edited by: 911653 on Oct 5, 2012 9:01 AM -
Merging SAP Clients - Reporting on Cross Client Table Compare Results
Hey folks,
We are trying to merge two clients into one (on the cheap), i think that cross client table comparision is the best way to find differences and possible issues and clashes with the two systems configuration, but i was wondering if there is anyway to report on these differences, so we can pull them out to word/excel document to anaylse and document them prior to making the changes.
Does anyone know if this possible?
Thanks a lot,
GregHello Mr. Newman,
I think using SCU0 is going to be the way to go but the output is not always the best. However you should be able to show the differences and download to excel to analyse further. If this doens't fit then I think you will have to look at copying the tcode / report and improving the output to meet your needs.
Alternatively post to basis folks and see if they have some better ideas!
Hope this helps,
Cheers,
Dan
Edited by: Danny boy on Mar 31, 2010 3:00 PM -
Windows 2008 R2 Terminal Server clients lose remote printer queues after logoff
There are similar issues to this already on the forums but not precisely like this as far as I can tell, and I have tried all the fixes mentioned in those other threads.
Windows 2008R2 terminal server connecting to a 2008R2 print server. A script maps a connection to the print server on login. Users can browse the print server, connect to print queues to add them, and the queues work OK at first. As soon as they logoff/login
again, the queues still appear in their list of printers but cannot be selected for printing ('Print' button is greyed out).
Domain administrator users can print OK always; this is only affecting regular-user accounts, so it is probably a security/permissions issue. Print queues configured on the terminal server itself are OK, this only affects the queues on the
print server.
No errors are generated in the Event Logs. No failures seen for the print spooler or anything else.
I have added Everyone with Full Control to C:\windows\system32\spool on the terminal server. Tried giving full permissions to all in the printer properties. Cleaned out all registry keys in Client Side Rendering Print Provider as mentioned in some other
threads. In group policy, client printer redirection and LPT port redirection is allowed, use Easy Print driver first, and the print server is in the Intranet zone for low security. The issue happens for all print queues on the print server with a variety
of drivers so I don't think it is driver-related.A bad GPO being applied ??
If you isolate a user, remove all GPO (even loopback's one), connect manually to a printqueue to make him install's one. Logoff and reconnect and check again if the printqueue work good. The only right that could block you is the driver's installation, but
I really sure that you don't have that issue (as it would be logged anyway)
The admin. account often have less GPO that apply to him.
MCP | MCTS 70-236: Exchange Server 2007, Configuring
Want to follow me ? | Blog:
http://www.jabea.net | http://blogs.technet.com/b/wikininjas/ -
Client export for ABAP programs, repository objects cross client objects
Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank youYou can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael -
Field exit showing---not allowed to change cross client customizing
hi all ,
when im trying to activate field exit . Its showing---not allowed to change cross client customizing.
how to correct that.
thanks in advance.
sghi SG,
first and foremost thing while using field exit is, ask your basis person to include the parameter abap/fieldexit = Y in your instance profile.
Otherwise u can't use the field exits.
Regards....
Arun.
Reward points if useful. -
Cross-client Consolidation Statement
Hello friends,
I have a requirement.
I have a situation where two company codes are working in different clients. They are using different chart of accounts also.
I want to make out a strategy for creating a consolidated Financial statement of these two companies. Currently it is being met through a manual process. But I want to do it through the system only without any manual intervention. How can I go about with this requirement. Your valuable responses will be highly appreciated with reward points.
Regards
MK BabuThis has discussed several times.please do a serach in SDN.
Check these threads
The specified item was not found.
Cross-Client
Cross client
cross client
Manoj.
Maybe you are looking for
-
How to get the destination path in an photoshop sdk export plugin when using a batch action?
Hello, I've written an exporter plugin (not save-as) that exports a given file to a custom format. I was able to open a file selector dialog and choose a path that is then transported to the saving location. Now my problem is: Another intended use is
-
How to resolve "Internal error: ABAP Report cannot be loaded" error
Hi All, I am new to SAP.Please help me out from this problem. When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps. In transaction ST22 it shows this dump something like t
-
How do I save the pdf on ipad3? How can I view the fiel from neu.Annotate so that I could do the editing from the app?
-
What is a keychain and do i need it?
I have recently forgotten my login password. I got my computer reboted and it is ok now but Keychain access required tabs keep popping up and when i enter my new password it does not recognise it. It is really irritating and i dont know what to...
-
Hello, I have recently just downloaded Dreamweaver CS3. I know there is CS4, but I need CS3. I downloaded the .exe file and when I try to run it I get this error. The first box that pops up says... Runtime Error! R6034 An application has made an att