Cross platform support

Hi,
I just finished a program i built on NetBeans (Windows XP). It's an IRC bot and i want to host it on my Linux server. It has the latest version of Java for Linux but i get a NoClassDefError when i try to run it. Is this a fault in the JRE or my program?
Thanks in advance

neither, it's a configuration issue, once you have the classpath set correctly, it will work fine

Similar Messages

Does JMF2.1.1 cross platform version support dvi/rtp

hi!!!
does JMF2.1.1 cross platform version support dvi/rtp ,8000.0 Hz,4-bit format???
when i type java AVTransmit2 javasound:/0 224.0.0.1 22222 at the konsole in linux i am getting the following error:
Audio not supported: interface TargetDataLine supporting format PCM_SIGNED, 44100.0 Hz, 16 bit, stereo, little-endian, audio data, and buffers of 22050 to 22050 bytes
Audio not supported: interface TargetDataLine supporting format PCM_SIGNED, 44100.0 Hz, 16 bit, stereo, little-endian, audio data, and buffers of 22050 to 22050 bytes

hi,
I still dont understand well the jmf either, but i can confirm that i am able to capture audio (using javasound://8000) to capture at 8Khz, setting a processor model with this source, AudioFormat.DVI_RTP and ContentDescriptor.RAW_RTP
and my transmition happens well:
dvi/rtp, 8000.0 Hz, 4-bit, Mono
I JUST CAN CONFIRM THAT JMF 2.1.1 DO SUPPORT DVI/RTP 8000.0 4BIT
as per the documentation, a processor model requires:
1. a datasource
2. an imput audio format
3. the output content description
one will think then that the audio imput should be linear and the output should be div/rtp, but it seems it doesnt work like that, im digging on the docs with no success till now, so by experiments i can say that somehow the imput audio format, already tells the kind of coder one will use, that case, DVI/RTP. This means, the data is encoded to a special DVI format who prepare the packets to be Transmitted, and then on the output content one says, is data ready to be transmitted, since is already packetize you say just content is raw or raw_rtp.
you can not for example say, then ok, convert my imput to a DVI and then packetize it to a (DVI)/RTP, because in this case you will have, starting from the capture device:
LINEAR convert to DVI> DVI packetize> DVI_RTP -----> Tx
why not? because there is no codec that receives DVI and convert it to DVI_RTP,
the only one we got is com.ibm.media.codec.audio.dvi.JavaEncoder
this one is only able to take linear and convert it to DVI/RTP
so you have to use the model
LINEAR ----> DVI/RTP -----> CONTENT = RAW ----> tx it, sink it, but not write...
to write there are more problems, but that was not the question, just tx
if someone can explain this better or point to a docs were it is explain it, ill appreciate,
regards,
jahm

External Hard Drive won't appear on PC (want cross platform)

I have an external USB Hard Drive. I formatted it using the Disk Utility, OS Format and Journaling. Did a small partition in case I needed a system boot drive. Now my sis needed to backup her laptop (Dell laptop), but the drive won't appear in My Computer, it recognizes there is a USB device on the lower task bar, but no drive anywhere.
Do I have to reformat? what steps do I need to make this USB drive cross-platform friendly?
Paul

Hi, Paul.
You may not want to reformat the drive as FAT-32 since there is a limit on the size of the partition, the maximum file size, and other issues, especially if her Dell's drive is formatted as NTFS (FAT-32 does not support NTFS extended attributes). FAT-32 is unsuitable for backing-up Mac OS X volumes as it cannot preserve the extended attributes (permissions, etc.) employed by Mac OS X.
It's really best if you each have your own external hard drive for backup, as part of implementing a comprehensive Backup and Recovery solution, such as I use and detail in my "Backup and Recovery" FAQ. You also don't want one person inadvertently writing over another person's backups, which could happen if one is not careful. Furthermore, it is often easiest for recovery.
How one handles backup in cross-platform environments is tricky and depends on the native formats employed by the different computers involved, and whether backup will be performed over a network or by directly connecting backup drives to the computers one is backing up.
To enable her Dell to use the Mac-formatted drive, install Mediafour's MacDrive for Windows on the PC. MacDrive for Windows is probably the state-of-the-art application for enabling you to use Mac-formatted disks and hard drives on Windows-based PCs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Which product to purchase (cross platform necessary from Mac to PC) Adobe Photoshop 6.0.x to ???

I have ancient Mac photoshop and pagemaker files. i need best cross platform product for windows that can access these files. adobe photoshop is my primary concern. I understand the indesign cs2 will import old school mac photoshop 6.0.x but is not compatible with windows 7 ... thank you.
In particular we use windows 7 x64
So in summary, need to determine which Windows 7 x64 version of Indesign CSxx will still open archaic Mac Adobe files (layouts, EPS, etc). Or is there a similar product that must be obtained. I prefer to stick to Adobe products, however, if I must go elsewhere and you can help -- please advise.
Also, if you know what I should obtain, does this product have a trial download option that I can test functionality before purchase? Warranty when I do buy information -- and return policy in general?
Many thanks.

PM support has long been pulled from InDesign. You are going to need some old version like CS or CS2 and save an intermediate step to ID files. PS is not a probelm at all. All programs have 30day trials and Adobe has a general 14day return policy. Refer to the product pages on teh website.
Mylenium

Any cross platform chat app (eg. Whatsapp) for Ash...

Hello,
Does anyone know any cross platform chat app which can be used on Asha 501? I bought the phone today and I was only able to find Nokia Chat which is preinstalled on the phone but that app is not available on android.
Any help regarding this?
Thanks.
Solved!
Go to Solution.

PrakashGupta wrote:
can any one tell whatsapp application supports for nokia asha 501?
Hello ! Please tell me the battery life , is very good ?

Are cross-platform upgrades allowed?

I own a copy of Adobe CS3 for Windows. I have recently purchased a Mac, and need to get Adobe Creative Suite (preferably CS6) set up on it. Do I need to buy a completely new version of Creative Suite for the Mac, or can I buy a Mac upgrade version, and then use my serial code from CS3 Windows version to validate the upgrade version on my Mac? If I can do that, is it allowed to also buy an upgrade version of CS6 for Windows, and install that using the same CS3 license key to validate the upgrade version on Windows?

Yes ,it is possible to upgrade from cs3 to cs6 & that also cross platform, yes it should accept the windows previous version serial key , The Enter Serial Number Upgrade dialog box also accepts the Windows serial number{if not then contact Adobe support }.
The best option is to place the order through the adobe sales team
800-585-0774
Monday-Friday
9am-10pm (Eastern Time)

Golden Gate 11: cross platform replication

hello,
wonder if there are any cross platform (major) issues for establishing a two way replication between Sparc Solarix 5.10 to x86 Linux based hosts ?
RDBMS versions are same or 11.2 vs 12.1
We are planing to use 12C gg on a new installs.
thank you

Hi,
It would be better to ask this question in the GoldenGate community forum -
GoldenGate
or if you have access to My Oracle Support in the MOS forum -
GoldenGate, Streams and Distributed Database (MO
Regards,
Mike

Can I use Messages in OSX to text with a person on an Android platform? My iPhone works cross platform but I don't get the text in Messages on my desktop with OSX 10.8.2

Does "Messages" in OSX 10.8.2 work cross platform? My daughter has an android phone and I can text with her OK in iOS. However, her texts don't show up on OSX whereas texts from my son, who has an iPhone, work in iOS and OSX.

HI,
The answer is yes and no.
As Barney-15E link says you can get the Messages app to SMS to AIM Buddies. Or rather telephone Numbers as AIM Buddies.
There are limits.
The computer has to be set as if in the United States (System Preferences > Language and Text > Region)
The phone is question has to be on a carrier that supports AIM SMS forwarding which only applies to some US based carriers.
The reason the SMS Messages arriving on the iPhone do not sync is that they are not iMessages (the "No" Part).
I use Messages with the Buddy List Showing.
As a test I have added a made up number as a Buddy and also created a Address Card for it.
So Mousing over the "Buddy" reveal the "Screen Name" which is the phone Number
You have to include the Leading +1 country code as well.
9:32 PM Thursday; March 14, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

4.0 to ECC 6 Cross Platform

Hi Gurus,
I'll be performing a Heterogenous Copy (from 4.0 Oracle 8/ Sun -
> Win2003/SQL) and then will upgrade in to ECC 6.Since this will be a very heavy task for me, really appreciated it if someone who has experience can share with me in this cross platform environment.My Question :
1) Which is the best method to perform Hetero Copy:
a. Make the target system the same level (4.0) as the source system and then upgrade to 4.6D ext or
b. Upgrade the SAP on the source system (4.0 to 4.6D ext) and then do R3Load?
2) Which one is the best pre-upgrade before upgrading to ECC 6.0?
a. Upgrade to 4.6D ext or 4.7?
b. on the target system SQL 2000 SP4 or SQL 2005 SP2 (Still not confident with the SQL 2005 yet - too many issues )
c. On oracle level, theres no need to upgrade from 8 to 9.2 is it?
Is there any sapnotes/forum that I can refer too?
TQ

> I'll be performing a Heterogenous Copy (from 4.0 Oracle 8/ Sun -
> Win2003/SQL) and then will upgrade in to ECC 6.Since this will be a very heavy task for me, really appreciated it if someone who has experience can share with me in this cross platform environment.My Question :
First advise: if this is a production system you will need to have certified migration consultant on-site - otherwise you will loose support for the target system and for all problems arising from that migration.
> 1) Which is the best method to perform Hetero Copy:
>
> a. Make the target system the same level (4.0) as the source system and then upgrade to 4.6D ext or
> b. Upgrade the SAP on the source system (4.0 to 4.6D ext) and then do R3Load?
Since the kernel for 4.0 is LONG out of maintenance I suggest you upgraded to the latest available 46D_EXT kernel and do the R3load export with that one. This will make sure you will have the most recent kernel avoiding problems resulting out of an unpatched R3load.
> 2) Which one is the best pre-upgrade before upgrading to ECC 6.0?
>
> a. Upgrade to 4.6D ext or 4.7?
You can upgrade straight away from 4.0 to ECC 6.0 (now called ERP 6.0).
> b. on the target system SQL 2000 SP4 or SQL 2005 SP2 (Still not confident with the SQL 2005 yet - too many issues )
I would go for SQL 2005.
> c. On oracle level, theres no need to upgrade from 8 to 9.2 is it?
If you upgrade to ERP 6.0 you will NEED to upgrade to Oracle 10g before you can start the upgrade.
Markus

Recommendations for cross-platform software development?

I'm considering developing a new shareware product and I'd like for it to be able to run on both OS X and Windows, and Linux too if that ends up not requiring too much more effort.
I've been a Java programmer for many years now, making Java in some ways a very obvious solution. But I've never been all that pleased with the look and the performance of Java Swing GUIs. Swing isn't all that bad for some uses, but it can be clumsy in many ways (like Mac open/save file dialogs), doesn't always get the look-and-feel of a particular platform quite right, misses many platform-specific features one might want to access -- in short, Java-based apps seldom manage to have the fit-and-finish of off-the-shelf, shrink-wrapped commercial software.
I could stick with Java and try out the SWT toolkit (it's better at getting native look-and-feel, and native performance) for building a GUI, but from what I've read SWT has its limitation as well, and besides, because of the nature of the product I have in mind -- something dealing with audio and music -- a lot of the open source code I'd like to incorporate into my product is written in C or C++, and I might need to do some low-level driver work too. Trying to bridge all of that into a Java app with lots of JNI work doesn't seem like the best route to take.
I could learn C# and use Mono to make my stuff work for OS X, but, although I've never worked with C# and whatever standard GUI libraries one would typically use with C#, I suspect that it will work best for Windows and be kind of iffy for Mac use.
All this said, I'm fairly certain that, after many years away from it, the best thing for me to do is get back into using C++ for this project.
From my cursory preliminary research, the best looking C++ cross-platform development library I've seen so far is Qt from Trolltech. It's also very expensive from the viewpoint of a start-up operation -- a few thousand dollars, even with a 65% discount given to small start-ups.
There's the totally free, open-source wxWidgets, but it sounds like wxWidgets' Mac support isn't the greatest, and it sounds like it's noticeably buggier than Qt. Maybe it would still be good enough for my uses, but I don't know that yet -- which is one reason I'm writing this post, hoping others have had some experience with it.
Anyone know any other C++ cross platform toolkits for general GUI application development? One article I read said:
If your needs are a free cross-platform environment, then wxWidgets is your best and only solution. However, for under $100, you can find a cross-platform environment with a much better Macintosh user experience than wxWidgets.
I can't seem to find any of these better-than-wxWidgets, under-$100 solutions, however. Suggestions, anyone?
Quad G5 + 15" MBP Mac OS X (10.4.6)

Hi--
I think, from looking at that page he must be talking about the CPLAT framwork. It's kind of hard to figure out from that page, but he's got another page with information on CPLAT here.
It looks like it's $50 for the license. You can also look at the official CPLAT site for more info. I've never used it, though, so I can't really say whether it's any good or not. But there is a trial version available...
charlie

Template Cross-Platform - Version Differences

I created a template in Dreamweaver 8 on a Mac and sent it to
a programmer using Dreamweaver MX on WIndows and the formatting for
him is messed up. Divs aren't lining up where I put them. He sent a
screen shot of his directory (which matches mine) and of the
template within DW MX and the divs are out of place.
Is this issue based on OS cross-platform, DW 8 to MX and
differences in how those versions handle MX or some other issue?
Thanks,
Brian

HTML is HTML, you know? It wouldn't make any difference if
you were
creating on a Mac, a PC, or a Linux box.
But - DMX is a dumb bunny when it comes to any advanced
layout methods. I
imagine the problem you are seeing is due to DMX's inability
to render CSS
layouts properly. Is your colleague using DMX6.0 or 6.1? If
the former,
they should at the least update to the latter immediately,
although that may
not fix the problems either.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yevri" <[email protected]> wrote in message
news:fce162$kui$[email protected]..
>I created a template in Dreamweaver 8 on a Mac and sent
it to a programmer
> using Dreamweaver MX on WIndows and the formatting for
him is messed up.
> Divs
> aren't lining up where I put them. He sent a screen shot
of his directory
> (which matches mine) and of the template within DW MX
and the divs are out
> of
> place.
>
> Is this issue based on OS cross-platform, DW 8 to MX and
differences in
> how
> those versions handle MX or some other issue?
>
> Thanks,
>
> Brian
>

Help! Cross Platform Projector issue

Hi all,
I am sure this has been a hot topic for years and I did do
various searches and was surprised not to find anything on it
quickly. Sorry if this has been discussed a lot, as I imagine it
has. We are able to make our functioning mac and win projector with
our win version of flash 8, but everytime I burn the cd on win, the
projector file does not know what to do with itself when trying to
launch back on mac.
Questions:
1. Does cross platform burning have to be performed on a Mac?
2. If so, does one need toast to do the cross platform
burning to make the mac and win projectors groovy on their
respective platforms? We have a brand new MacBook Pro - it seems
like it should have these capabilities built in at this point, but
not sure.
Any pointers here or to a technote would be much appreciated.
Thanks!
We

Read this
http://board.flashkit.com/board/showthread.php?s=ffa1834a93ea5d8f5c4c8f9e97f34191&threadid =500326
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Recommended way to unit test mobile cross platform C++ in Visual Studio 2015

Hello,
I'm playing with the new Visual Studio 2015 to check its capabilities for cross platform development using C++ as coding language. I've seen several videos in Channel9 about this feature but I don't remember hearing in any of these a word about how
to unit test such projects from Visual Studio 2015. Is there some recommended way to create unit tests for such projects?
I'm not sure I can use Visual Studio test projects for C++ to test the android library or the Windows Phone 8.1. If I add a new platform ARM to a test project of those, I cannot select in the platform toolset combo the values that I have for my libraries
(Clang 3.4 and Windows 8.1 respectively). So it seems that such test projects are not addressed for cross platform c++ in VS2015.
I also have tried to make a second cross platform library project to contain the tests, adding there the Catch.h file from catch framework or adding the files from Google Test framework. My idea was to link each cross platform test library with their corresponding
"production code" libraries. In both cases (catch and gtest) I have problems when trying to compile the test framework files (not sure if it is not possible or just my fault being new at C++ for mobile platforms).
Has anyone succeeded unit testing the cross platform c++ code in VS2015? How?
Thanks in advance,
Jorge.

Hi Jorge,
Thanks you for posting in MSDN forum.
Based on your issue, since VS2015 Preview is previews for the next major release of Visual Studio, currently we forums don’t provide support for VS2015 Preview. So the product team would accept the suggestions or feedbacks for the VS2015 now.
So you can submit the feedback/suggestions to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx, Microsoft engineers will evaluate them seriously. Thanks for your understanding.
After you submit the feedback, you can post the link here which will be beneficial for other members with the similar issue. And I will help you to vote it.
Thank you for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cross-platform upgrade?

Can I get cross-platform upgrade Adobe creative suite 5 Design Premium (student and teacher edition) from PC to Mac OS 10.10.2?

No, cross-platform swapping is only supported for the latest release CS version which is now CS6.
Order product | Platform, language swap

Cross Platform migration AIX to linux (ERROR IN CONVERSION ORA-19994: Message 19994 not found)

I am performing a cross platform migration aix to Linux from release 11.2.0.2 to 11.2.0.4. I am using this doc
Reduce Transportable Tablespace Downtime using Cross Platform Incremental Backup (Doc ID 1389592.1).
I am using the db_file_transer method and I have hit this error
Error:
/home/oracle/local/db_convert/dest_rman/xxttconv_i3q0t1ha_1_1_4.sql execution failed
ERROR IN CONVERSION ORA-19994: Message 19994 not found; product=RDBMS;
facility=ORA
ORA-19600: input file is backup piece
(/oraback/nfclpat1/i2q0t1ha_1_1)
ORA-19601: output file is backup piece
(/oraback/nfclpat1_tmp/xib_i2q0t1ha_1_1_5_28)
CONVERTED BACKUP PIECE/oraback/nfclpat1_tmp/xib_i2q0t1ha_1_1_5_28
PL/SQL procedure successfully completed.
I have searched and do not have anything to go on.
Can anyone who has seen this give me some direction?

As per Oracle documentation on given error code, Please see if following action helps.
ORA-19994: cross-platform backup of compressed backups to different endianess is not supported
Cause: A cross-platform backup was requested for a compressed backup to a different endianess from the current platform.
Action: Do not specify a compressed backup or specify the same endian platform.

Cross platform support

Similar Messages

Maybe you are looking for