Cross using of MovieClips and externally constructed MovieClips in 2 SWF-Files

Hello, I have two SWF-Movies. One is exported into eht other as Child.
Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)

the applicationdomain holds the classes from loaded swfs.  you should read the flash help files.
but, if you wanted to create an instance of the class C1 that's defined in swf2.swf and, you're loading swf2.swf, you could use:
var ldr:Loader = new Loader();
var urlR:URLRequest = new URLRequest("swf2.swf");
ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,f);
var loaderContext:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain);
ldr.load(urlR,loaderContext);
function f(e:Event){
    var C:Class = Class(ApplicationDomain.currentDomain.getDefinition("C1"));
    var c1:* = new C();

Similar Messages

  • I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

    I have a Windows 7 laptop using I tunes 64 and all my music files are
    on an external disc. I rarely use I tunes and at one point moved all my files
    (including the music files) from one external disc to another without
    considering what affect this would have on the I tunes library. When I eventually
    attempted to use I tunes, every selected a song from the library resulted in a
    message stating that the file couldn't be located. After following some of the procedures
    explained in this community I was able to reconnect the library back to where
    the associated music files are presently stored. However, there are still 2
    problems that need to be corrected. 1) Every song file now has a duplicate. One
    file works and the other file will result in the same message stating that the
    file couldn't be located. Before there were 4,000 songs in the library, now
    there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
    the playlists are still associated with the dead song files which makes the
    playlists unusable. Can the playlists be reconnected to the usable files
    without manually having to recreate them? Thanks in advance for the help.
    sdkr

    So am I understanding correctly?
    You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
    If you used drag and drop your choices are different than if you used iTunes to transfer.
    Good luck!

  • ESS 50.4 and MSS 60.1.20 for R/3 4.7 using EP7.0 and external ITS 6.20

    SAP@WEB studio
    Hi All,
    we are implementing ESS 50.4 and MSS 60.1.20 for R/3 4.7 using EP7.0 and external ITS 6.20.
    1).
    first of all is this landscape possible ?
    2).
    If it is possible then do i need SAP@WEB studio along with the external ITS ?
    3).
    once i install external ITS what are the stpes to be followed next ? i mean how can i connect to r/3 from the portal using the ITS ?
    thanks and regards,
    PK

    PK,
    Please see the ITS Administration guide and the ITS Installation guide.
    You will see that when you install the External ITS you will be asked for R/3 connection information, such as logon group, hostname, system name, system number, message server, depending on what connection method you choose. 
    As for connecting the External ITS to Portal, as I stated, you will create iViews in the Portal and you will be asked for a URL.  The URL is the External ITS URL, which should be something like http://hostname:port/scripts/wgate/service/!
    Please read the guides and FAQ.  Thank you.
    Edgar

  • I paired my old LG phone using bluetooth exchange and uploaded all of the Voice Memo files from it to my macbook and I can't find the file, where would it be located ?

    I paired my old LG phone using bluetooth exchange and uploaded all of the Voice Memo files from it to my macbook and I can't find the file, where would it be located ?

    You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
    Unless you've iPhone 4S (looks similar to iPhone 4)

  • Using Time Machine and external USB drive for multiple Macs

    I just bought a 1.5TB external portable drive.  I have 4 macs in the household that might have about 400 - 500 GB of total HD capacity for the four of them.  I am very confused on whether to create a separate partition for each mac, or let Time Machine manage the entire, single-partition drive.
    The reason I ask is because I have run into issues with a smaller external HD where it didnt seem to know to remove old backups to make room for new ones.  But, its' possible the 750 GB drive was too small to do what it needed to do.
    So, I am looking for some definitive information on the best way to do this.  Obviously, i'd rather leave the 1.5TB as a single partition, and hope (and expect) Time Machine to manage the backups of the four macs in such a way that it can properly make room as backups are added to the drive.
    THoughts?

    D/FW wrote:
    Use a 1TB Time Capsule to backup wirelessly and a FW800 external drive for speed in case I need to reinstall. Therefore having 2 backups?
    You can do that, but not simultaneously. TM only has one destination a a time; you can back up to the TC, then select the external HD via TM Preferences, then switch back.
    I've been down the road of using SD (cloning) and am ready to move on to another backup strategy. Cloning works fine but it dedicates a drive 100% of the time where TM doesn't.
    I don't know what you mean by that. I use CarbonCopyCloner (similar to SD) in addition to full TM backups, so I have two separate, independent backups, on two separate drives, and get the advantages of both. You can partition an external drive (but not a Time Capsule), so you could have your clone on one partition, and other things in one or more additional partitions (I do that as well). As long as the "clone" partition is the same size as your internal HD (or at a minimum, at least 15% larger than the amount of data on it), you can use the rest of the space for anything else.
    See #5 in the Frequently Asked Questions *User Tip* at the top of this forum for detailed instructions on setting-up a drive for Time Machine. The same procedure works for setting one up for a clone and other partition(s), too.

  • Using Time Capsule and External FW Drive for TM Backups

    Wondering if this can be done, or if anyone is successfully doing it.
    Here's what I want to do:
    Use a 1TB Time Capsule to backup wirelessly and a FW800 external drive for speed in case I need to reinstall. Therefore having 2 backups? I've been down the road of using SD (cloning) and am ready to move on to another backup strategy. Cloning works fine but it dedicates a drive 100% of the time where TM doesn't.
    One thing I did with an old 2.5" 80GB HD in an enclosure that I like a lot is put 10.6.2 on it along with Disk Warrior 4.2, Tech Tool Pro, and Drive Genius to use as a startup and repair disk.

    D/FW wrote:
    Use a 1TB Time Capsule to backup wirelessly and a FW800 external drive for speed in case I need to reinstall. Therefore having 2 backups?
    You can do that, but not simultaneously. TM only has one destination a a time; you can back up to the TC, then select the external HD via TM Preferences, then switch back.
    I've been down the road of using SD (cloning) and am ready to move on to another backup strategy. Cloning works fine but it dedicates a drive 100% of the time where TM doesn't.
    I don't know what you mean by that. I use CarbonCopyCloner (similar to SD) in addition to full TM backups, so I have two separate, independent backups, on two separate drives, and get the advantages of both. You can partition an external drive (but not a Time Capsule), so you could have your clone on one partition, and other things in one or more additional partitions (I do that as well). As long as the "clone" partition is the same size as your internal HD (or at a minimum, at least 15% larger than the amount of data on it), you can use the rest of the space for anything else.
    See #5 in the Frequently Asked Questions *User Tip* at the top of this forum for detailed instructions on setting-up a drive for Time Machine. The same procedure works for setting one up for a clone and other partition(s), too.

  • Can I use my monitor and external speakers with apple tv

    I have an extra computer monitor (DVI input) and external speakers (3.5mm male audio jack.) Is there  some combination of adapters that I can use to hook up an apple tv to them in order to stream from netflix, and my itunes library?

    no but you can get tons of solutions where you connect something to your tv's minijack headset connector and then it wireless transfer the audio signal to a headset
    there are both bluetooth solutions belkin have one I use and there are also solutions where the headset is included and they use their own custom protocol
    but mind you there is no way to keep such setups in sync in terms of video and audio so if the system is poor in quality or pre-process the audio signal too much it cause audio and visuals to get out of sync

  • Can I use a select and update statement in a single jsp file?

    I want to update the BUY table everytime I would add a SELL transaction.....I want to minus the stocks that I sold to those that Ive bought before.....
    note: I used a seperate table in BUY and SELL transaction
    After I Have added a transaction, I want to update the buy table. This is my problem, can I used both SELECT and UPDATE statement at the same time in a single jsp file for example like this:
    select * from test, test1;
    update test
    set total_shares=total_shares-Stotal;
    where stock_code=Scode AND name_broker=Sbroker;
    Can i have both of these statements in the same jsp file in oder to update the buy table?
    Or can anyone suggest how can process that update?THANKS!
    --------------------

    Can i have both of these statements in the same jsp file in oder to update the buy table?Yes. But wouldn't it have been easier just to try it?

  • I am using a mac and i can't read a pfd file

    i am using a mac and i cant read i pdf file the system want me to agree first on adobe reader agreement but i dont know how

    Open Adobe Reader on it's own (not through a browser), accept the agreement.

  • I want to use PCK standalone and do one scenario of mail to file ?

    hi all
    Is it possible to use PCK standalone and do scenario of mail to file by using PCK mail and file adapters .if yes reply me
    thanks

    i didn't get you sir ...can please clarify me . i had done the same scenario using XI but in PCK is it the same? because in PCK it requires Default Interface Name and Namespace which must exists in XI and we can't even create our own interface in PCK .so howz it possible without XI.
    please reply me
    Message was edited by:
            Ashwin Kumar Dhakne

  • Can keyboardEvent and mouseEvent work in the same .swf file?

    I'm nowhere near an expert on Flash or action script, so this is probably a simple thing to solve. But so far I haven't figured it out.
    I put together a rather simple interactive .swf file using graphical "buttons" to navigate through different screens. Afterwards, I was told to add in two keyboard events as well: one to navigate to the next screen and one to restart the .swf file.
    Using the keyboard to navigate the way I explained above works fine--that is, until I use the mouse to click on a button. Once I do that, the keyboard events no longer work. For example, if I start off the .swf file by pressing the Space bar on the keyboard to navigate to another page, it works fine. If I then press the "R" key on the keyboard to restart the .swf file, that works fine as well.
    However, the first time I click on one of the buttons on the stage to navigate to another screen, the keyboard events no longer work. I can press the Space bar, and nothing. I can press the "R" key to restart the .swf file, and nothing. It's as if using a mouse event disabled the keyboard events or made the .swf file stop "listening" for keyboard events. The only way I can get the keyboard events to work again is by clicking somewhere on the stage and THEN pressing the appropriate keyboard key. I'm guessing that's because I put the focus back on the stage, maybe?? (again, not an expert here)
    My code is ridiculously simple, and it's on the first frame:
    stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
    function onKey(event:KeyboardEvent):void
        if (event.keyCode == Keyboard.SPACE)
            gotoAndPlay(currentFrame + 1);
         if (event.keyCode == 82)
            gotoAndPlay(1);
    Is there anything I need to do to this to make sure the .swf file is always "listening" and registering the keyboard events?
    Thanks..

    use:
    trace("defined");
    stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
    function onKey(event:KeyboardEvent):void
    trace(event);
        if (event.keyCode == Keyboard.SPACE)
            gotoAndPlay(currentFrame + 1);
         if (event.keyCode == 82)
            gotoAndPlay(1);
    test by clicking one of your buttons and watching the output panel for "defined".  if you don't see that, you're not defining a keyboard listener when that button is clicked.  if you do see it, then click a keyboard key.  (if you're testing in the flash test environment make sure you disable keyboard shortcuts.)   if you fail to see the keyboardevent trace, you're removing or disabling your listener after it's defined.

  • Running a Flex App using Coldfusion Flash Remoting Services gives me a blank SWF file but no errors

    I cannot get flex to compile to display anything. even if its
    just a single panel and some text. If I use the wizard and choose
    "Basic" or whatever, I get a flex app. But i am using cfcs so I
    selected "Coldfusion Flash Remoting Services" and when I select
    run, the browser pops up with a nice big blank screen. No loading
    progress bar, no errors, nothing.
    I am running cf8 as a standalone (developers edition)
    under project properites --> server
    root folder: C:\ColdFusion8\wwwroot
    root url
    http://localhost:8500/
    context: (blank)
    I have messed with context and webroot.
    I doesn't matter if I use a remoteObject or not. Nothing
    happens
    i through in a crossdomain.xml into the root to open it up,
    just to be sure.
    I am really stumped. I had this working fine on a previous pc
    (running cf7)
    any ideas anyone???

    I tried with some of the AS3 files from Adobe samples (http://www.adobe.com/devnet/actionscript/samples.html), for eg., the Drawing API. There are slider components in the flash app that don't show up either. Does that give anyone a clue as to what might be wrong? Thanks, Ramesh

  • Back up using time machine and external hard drive

    Hello,
    I am having a difficult time deciding the best way to back up important documents. 
    I have:
    1TB internal hard drive
    3 TB external hard drive and
    1TB external hard drive
    I currently have about 1TB worth of data to be stored, but that will increase to about 1.5TB once I get a bunch of stuff off the HD camera's hard drive.  I would like to keep my internal hard drive somewhat free to keep the computer running fast, but also want to make sure I am properly backed up. 
    Should I put ALL (or nearly all) of the files on the 3 TB external hard drive, and have time machine back that up and not worry about the rest? I'm a little weary about putting all of the files on one device even if it is backed up by TM. 
    If I do this, do I need to back up the 3 TB external drive in addition to using TM?
    Thanks!

    iMac11,2
    OS X 10.6.8

  • How to look at movies with IPAD3 using Airport express and external disk drive (USB connexion to Airport Express)

    I would like to stotre several movies on an external disk drive connected to Airport express through USB port. With my IPAD, I am able to use the WiFi network (generated by Airport) buy I don't see the disk.... how to make it happen ? Thanks. JP A

    Shoudl I use ICloud instead or another way ?
    I have not tried iCloud for this...and understand that it is mainly for your backups. These link might help:
    http://www.apple.com/icloud/get-started/
    http://www.apple.com/icloud/setup/
    Or, you could post in the iPad support area since that is really what your question is about.

  • Using Time machine and external HD at the same time

    Dear All
    I'm intending to buy an external HD both for the purpose as a external HD and for time machine use.
    Is this possible? If so, how do I configure it?
    Thanks.
    Jojos

    Apple Partition Map works just fine on an external HD (including booting from a clone made with SD). GUID is only required for the internal HD on Intel-based Macs. There is a lot of misinformation going around on this topic.
    Is Apple spreading the misinformation Barry? This OP originally asked about Time Machine and an external drive. He later asked about bootable backups. I tried to take all that in consideration in my reply. Apple has consistently said in everything that I have read in the Knowledge Base that when using Time Machine with an Intel Mac to use the GUID partitioning scheme.
    There are also recent posts around these forums, as well as around the internet, where folks have had bootable volumes that were not GUID and they encountered strange behavior on their Macs that they report was resolved by making sure that their bootable volumes on external drives were in the GUID partitioning scheme.
    Dah•veed

Maybe you are looking for