Crossing my fingers..found a solution to MMS issue on the LG G2

So, I've been pouring over forum posts here and elsewhere discovering that this MMS sending/receiving issue I've been having is not "just me" and seems to be an android/google issue with no future fix until at the earliest Sept. I was all set to go to my local store and trade it in for a different phone. The service guy there just happened to have the LG G2 as his own personal phone and was confused about this "issue" I was having. He said he's had this phone since earlier in the year and never had an issue. Even since the Kit-Kat update. The biggest difference between how he uses his phone and how I was using mine is that he's always used Hangouts instead of the stock messaging app. Since I read on here that a few others have had success with Hangouts...I figured I'd do a factory reset and start with Hangouts and see if that doesn't work. Just thought I'd suggest this to others to try as a solution. We'll see if it doesn't revert to messing up again in a couple days.

The issue with the LG G2 not receiving MMS is the same across the board for a lot of G2 owners. The issue isn't any different. Some have found fixes or work-arounds, but no one has found a solution. This goes back to a message I posted earlier in the forum community about VZW customer support not having good communication or a support page that provides them with issues. Too many times I have read a reply by VZW support that asks what is going on, or provides a statement that says we want your device working correctly. It appears to those who look to this forum for answers or suggestions, that VZW doesn't take note of this MMS issue for G2s. The issue is that at some point, we lose the ability to send/receive picture messages through the native messaging app. While no one has pinpointed an exact cause, the Tech Coaches have indicated there is a "known device issue" and that an software update is in the works. Yet, I haven't seen any replies from VZW community customer support mention this to those writing in. The lack of information that flows from customer support is troubling. Nothing in this world is perfect. While we all want our devices to work correctly, it is more about letting us know that you are aware of an issue and that you are attempting a fix for it. Too many have no idea that there is a compatibility problem with the device.

Similar Messages

Found Permanent Solution to Overheating issues.

Alright this is the part where some of you are going to be happy with me and some of you are going to be upset. That's because I know how to solve overheating issues with xp, and with macbookpro using the Geforce 9400M, and the Geforce 9600M GT. This solution very well could work for other systems, if you find the right drivers. but here it goes.
Alright, I have obtained nvidia drivers that will efficiently replace your current ones and stop the both cards from running simultaneously. I have read that this is the problem, though I don't know if that's really what's going on, because obviously, we can all run high end gfx games on our mac os, and not get to the critical point of our laptops shutting down, but on Bootcamp we all seem to have this issue and I haven't found a single solution that really helps.
Ok lets start off, everyone, use your fan control programs, wether SMC or input remapper, doesn't matter to me, personally, I use SMC and deal with the restarting os all the time to keep my fans running at max speed, 6000rpm.
Now comes the solution, type this into google. "185.85notebook_winxp_32bitwhql" and I'm assuming though i don't know, that they have this for other than xp users. Download this driver from the very first site that comes up.
And then proceed to uninstall your nvidia drivers for windows. Select "Remove Only the Following", and check both SMU DRIVER, and PCI SYSTEM MANAGEMENT, but for the sake of keeping your internet, leave the ethernet driver. Uninstall.
Install your new nvidia drivers, and it should show up in your Add/Remove programs as being around 1gb of drivers. You should notice when you start your bootcamp your computer is complaining about new hardware thats not installed. Well yes, we're still using the gfx card, but without the extra drivers that apparently promote this overheating and instability.
If you are having trouble, let me know I'd be happy to help you out, at any stage. Try this out, Worst case scenario, you have to put your disc back in and reinstall your drivers. Oh yes, And i'm using the newest disc out from Snow leopard. I don't know if the drivers are any different.
Note Your computer will still heat up, it just doesn't reach the point during gaming that it needs to shut off to save your processor. Please let me know if this works for anyone else. I suffered this problem, of shutting down after an hour or two of play for weeks until I discovered that this solution worked for me.
Message was edited by: Trilithiumn

Sounds like a damaged database.
There are reports on here from people with all sorts of issues. That's what the forum is for. It proves nothing except that people have all sorts of issues.
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Found a solution for all issues!

Hi all, I just wanted to post my solution for all my problems with my nokia e63 (maling issues, crash issues, browsing issues, etc), yes, there is a simple way to solve them all and I took it, I just got a Blackberry and now everything runs smooth!! YES!, there is light at the end of the tunel, jajajajajaja I'm so happy to finally get over this nightmare, hope you all find your way out of Nokia's blackhole! Good luck

I was able to locate an example that somewhat applies to your application:
https://decibel.ni.com/content/docs/DOC-11632
I simply modified the code to allow for CI and CO tasks, similar to your VI, and it worked fine. I've attatched the modified code below. However, I was unable to run your code without receiving the error you were seeing. Even after I made the VIs identical (leading up to the Start Task VI), I saw different bahavior. The VI that you are working on may have been corrupt. This modified example should be a good starting point.
Applications Engineer
National Instruments
Attachments:
9401NibbleConfig.vi ‏29 KB

Premiere pro cc 2014 is crashing due to after effects plugins being installed in the mediacore. Is there a solution to this issue?

The title honestly says it all. I recently purchased CC 2014 and have been updating and transferring plugins from prior versions of adobe after effects. When installing those plugins as I did in previous versions of after effects none of the plugins were recognized/loaded. I eventually found a solution to this issue by simply installing the plugins into the media core. They have all successfully loaded, but due to their presence in the media core premiere pro is now crashing upon start up. Does anyone know a work around for this?
Image showing crash:
Specs:
OS: Windows 8.1
RAM: 8GB
CPU: Intel 5 4670k
GPU: GTX 980 sc
Premiere Pro CC 2014 and After Effects CC 2014 are both updated to their most recent versions

First ... have you checked that these are all updated to work with the CC versions? I'd check with the makers of each plugin, the software has MANY differences.
Next ... if say you removed all but one, do any of them work? It might be worthwhile to remove them from the folder, then add one by one until you find one that is crashing things. That would at least get you part way forward.
And ... you might list which ones you have, in what versions. Folks around here might be able to help just seeing that.
Neil

Has anyone experienced, if so found a solution to having electrical shock, tingling, pain and burning in fingers hand and wrist from using the apple mac computers??

Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook?? If, so have you found a solution?? Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative

I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives. They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded. I can't explain it, and I just make sure not to touch them at the same time.
I have never had any sensation touching just one of the devices alone. Is that what you are experiencing?

Finally Found a Solution to the Missing Palettes/No Screen update problem!

Ever since CS3 came out, Photoshop and Illustrator in particular (the worst offenders) wouldn't run properl
y on my system unless I did a full reboot before running either. Photoshop would load, but all palettes would be empty. Illustrator would forget t
o update the client area of the screen. Neither application was useable in that state. I have complained about it before, to no avail.
Now I have found the fix: Increasing the User Handle and GDI handle limits in Windows.
Here's an article on how to do this:
Increasing User Handle and GDI Handle Limits
Have you ever been working with a good number of applications at once? Are you a naturally born multi tasker? Alright, answer me this - who has had Windows buckle under the weight of all of these applications and display error messages stating that the system is out of memory or out of resources, buttons and menus do not work correctly, or you get an error sound but no message on the screen? I’ve hit this numerous times, to the point that I’ve lost work because of it…
(By the way, Adobe, can you please implement that little feature that Microsoft Office has had for years known as “auto save”? I don’t know how many times I’ve managed to completely max out Windows designing a web site and have had Photoshop fall over dead and disappear off my screen, only to find out that when I open Photoshop up again that the entire thing saved jack-all, all of those layers and documents gone poof into the void of darkness… if Microsoft can do it, why can’t you?)
Sometimes this happens even when you have a lot of system memory (RAM) still available. For instance, open up Internet Explorer and hold Ctrl+N to open up as many Internet Explorer windows as you can before menus, icons, and menus start displaying incorrectly, disappear, buttons aren’t clickable, etc. Close a few out and check your Windows Task Manager in the “Performance” tab, I bet you will find that a lot of your Physical Memory is still available.
This publication applies to:
    * Microsoft Windows 2000 Professional
    * Microsoft Windows 2000 Server
    * Microsoft Windows 2000 Advanced Server
    * Microsoft Windows XP Home Edition
    * Microsoft Windows XP Professional
    * Microsoft Windows XP Professional x64 Edition
    * Microsoft Windows XP Media Center Edition
    * Microsoft Windows XP Tablet PC Edition
DISCLAIMER: mikedopp.com and mikedopp hold no responsibility or liability whatsoever should something go wrong, or if you incorrectly modify the Windows Registry. Please take extreme caution while following this publication and follow the steps correctly.
“Okie-dokie, if I have all of this memory still available, why is Windows saying I’m out of memory and out of system resources!?”
Simple. You have hit the “user handle” or “GDI handle” limit in Windows. This limit is there for two reasons:
    * Leaky applications or faulty code & malware can’t easily crash the system by attempting to overflow the system with GDI handles, making everything un-usable until a reboot is performed.
    * To prevent a user from opening up more applications than the system can handle.
If you have 1 gigabyte (or 1024MB) of RAM or higher, the default User Handle and GDI Handle limits can be pretty restrictive when running a large working set of applications that demand the most from your system and tax it heavily.
“Do you feel my pain?”
Yes, of course. Otherwise, I wouldn’t be writing this article that is more than likely a good 2 or 3 pages in length.
I’m a designer and coder, I use Adobe Photoshop with a lot of documents opened up - on top of that, I usually listen to music while working as it helps me work better, so Windows Media Player 10 is usually open on my machine. Also opened are Windows Messenger, Microsoft Office Outlook 2003, SmartFTP (one of the best FTP clients I’ve ever used, highly recommended), Microsoft Word, a few dozen Internet Explorer windows, some Mozilla Firefox windows with a few tabs opened in each one, and EditPlus 2 for coding.
That’s a pretty heavy working set of applications, and I demand the most out of my computer when it comes to multitasking (I have a Pentium 4 2.66GHz, with 1.5GB of RAM just for those who are wondering).
I too have nailed these handle limits - more than once. After much searching and pondering I have finally come up with a working solution around this issue (hurray!)
“Yeah yeah, stop rambling and cut to the chase!”
First and foremost, I must warn you that modifying these settings incorrectly can render your Windows installation near useless. Also, depending on your computer configuration and the amount of RAM in your system, you may wish to play around with the numbers until you find a setting that is perfect for your computer.
To back up everything, open the Registry Editor (click on Start, Run, and then type “regedit.exe” (without the quotes).
To backup a registry key:
    * In the Registry Editor on the left hand side, you will see the navigation pane. Using your mouse or keyboard, navigate to the following subkeys:
    * HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems
    * HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Windows
    * Right click on each of the subkeys above in the left hand pane and from the context menu that appears, choose the “Export” option. Save the exported registry data file where ever you wish, but make sure that it will be accessible should we need to restore the files.
“OK, I’ve backed everything up! Now what!?”
Don’t quit the Registry Editor just yet - we still need to make some modifications in order to increase the handle limits in Windows.
With the Registry Editor opened, navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems. You will notice a set of “REG_MULTI_SZ” and “REG_EXPAND_SZ” keys in the right hand pane. The one that we are interested in modifying is called “Windows”.
To modify the key, double click on it. It should look something like this:
%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
The section of this string we are interested in modifting is “SharedSection”.
In the SharedSection part of the string you will notice 3 numbers. What we are interested in is the middle value, “3072?. Modify this value so that the middle number is “8192?.
It should look something like this after modifying the value:
   %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,8192,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
Now that we’ve changed this, lets continue, shall we?
In the left hand pane of the Registry Editor, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows. In the right hand side, you will see two REG_DWORD values, named “GDIProcessHandleQuota” and “USERProcessHandleQuota”. We will need to modify both of these.
The first key we will want to modify is “GDIProcessHandleQuota”. This keys value can be set between 256 and 16,384 (maximum), and the default value is 10,000. I’d recommend using 15,000 as a value for this key, however if you are doing a lot of multitasking, shoot for the stars and go with 16,384.
This key can not be set past 16,384 as it is the maximum acceptable value.
Now, lets modify “USERProcessHandleQuota”. This keys value can be set between 200 and 18,000 (maximum), with a default value of 10,000. I’d recommend increasing this value to the same number used with “GDIProcessHandleQuota”, however as previously mentioned if you are working with a hefty application workload, shoot for the stars and go wth the maximum value of 18,000.
This key can not be set past 18,000 as it is the maximum acceptable value.
Do NOT attempt to increase these values past the maximum - Windows will become very unstable and may even stop working correctly. If Windows starts acting up after changing these values, lower them until the issues are resolved, or restore the backups of these keys’ values that we created before making modifications.
Now that you’ve changed these values, restart your computer and tax the system using the Internet Explorer trick mentioned previously - open Internet Explorer and hold down Ctrl+N on your keyboard to open up new Internet Explorer windows. Continue this until menus, buttons, and user interface elements stop working correctly. Also, open any applications you run day-to-day while you are performing this, so that you can get more of an idea if you have everything configured correctly.
You may also want to monitor your memory usage and handles information in Task Manager to see whether or not the above registry values need any more modifications.
I hope this helps with any multi-tasking issues you may have run into while running Microsoft Windows, now get back to work!

You work like I do. It's very cool that you published this fix for XP people, but yow, what a lot of detailed things to check/set! Seems like it might just be simpler just to move up to Windows 7...
-Noel

Finally Found a Solution to the No Screen update problem!

Ever since CS3 came out, Photoshop and Illustrator in particular (the worst offenders) wouldn't run properl
y on my system unless I did a full reboot before running either. Photoshop would load, but all palettes would be empty. Illustrator would forget t
o update the client area of the screen. Neither application was useable in that state. I have complained about it before, to no avail.
Now I have found the fix: Increasing the User Handle and GDI handle limits in Windows.
Here's an article on how to do this:
Increasing User Handle and GDI Handle Limits
Have you ever been working with a good number of applications at once? Are you a naturally born multi tasker? Alright, answer me this - who has had Windows buckle under the weight of all of these applications and display error messages stating that the system is out of memory or out of resources, buttons and menus do not work correctly, or you get an error sound but no message on the screen? I’ve hit this numerous times, to the point that I’ve lost work because of it…
(By the way, Adobe, can you please implement that little feature that Microsoft Office has had for years known as “auto save”? I don’t know how many times I’ve managed to completely max out Windows designing a web site and have had Photoshop fall over dead and disappear off my screen, only to find out that when I open Photoshop up again that the entire thing saved jack-all, all of those layers and documents gone poof into the void of darkness… if Microsoft can do it, why can’t you?)
Sometimes this happens even when you have a lot of system memory (RAM) still available. For instance, open up Internet Explorer and hold Ctrl+N to open up as many Internet Explorer windows as you can before menus, icons, and menus start displaying incorrectly, disappear, buttons aren’t clickable, etc. Close a few out and check your Windows Task Manager in the “Performance” tab, I bet you will find that a lot of your Physical Memory is still available.
This publication applies to:
    * Microsoft Windows 2000 Professional
    * Microsoft Windows 2000 Server
    * Microsoft Windows 2000 Advanced Server
    * Microsoft Windows XP Home Edition
    * Microsoft Windows XP Professional
    * Microsoft Windows XP Professional x64 Edition
    * Microsoft Windows XP Media Center Edition
    * Microsoft Windows XP Tablet PC Edition
DISCLAIMER: mikedopp.com and mikedopp hold no responsibility or liability whatsoever should something go wrong, or if you incorrectly modify the Windows Registry. Please take extreme caution while following this publication and follow the steps correctly.
“Okie-dokie, if I have all of this memory still available, why is Windows saying I’m out of memory and out of system resources!?”
Simple. You have hit the “user handle” or “GDI handle” limit in Windows. This limit is there for two reasons:
    * Leaky applications or faulty code & malware can’t easily crash the system by attempting to overflow the system with GDI handles, making everything un-usable until a reboot is performed.
    * To prevent a user from opening up more applications than the system can handle.
If you have 1 gigabyte (or 1024MB) of RAM or higher, the default User Handle and GDI Handle limits can be pretty restrictive when running a large working set of applications that demand the most from your system and tax it heavily.
“Do you feel my pain?”
Yes, of course. Otherwise, I wouldn’t be writing this article that is more than likely a good 2 or 3 pages in length.
I’m a designer and coder, I use Adobe Photoshop with a lot of documents opened up - on top of that, I usually listen to music while working as it helps me work better, so Windows Media Player 10 is usually open on my machine. Also opened are Windows Messenger, Microsoft Office Outlook 2003, SmartFTP (one of the best FTP clients I’ve ever used, highly recommended), Microsoft Word, a few dozen Internet Explorer windows, some Mozilla Firefox windows with a few tabs opened in each one, and EditPlus 2 for coding.
That’s a pretty heavy working set of applications, and I demand the most out of my computer when it comes to multitasking (I have a Pentium 4 2.66GHz, with 1.5GB of RAM just for those who are wondering).
I too have nailed these handle limits - more than once. After much searching and pondering I have finally come up with a working solution around this issue (hurray!)
“Yeah yeah, stop rambling and cut to the chase!”
First and foremost, I must warn you that modifying these settings incorrectly can render your Windows installation near useless. Also, depending on your computer configuration and the amount of RAM in your system, you may wish to play around with the numbers until you find a setting that is perfect for your computer.
To back up everything, open the Registry Editor (click on Start, Run, and then type “regedit.exe” (without the quotes).
To backup a registry key:
    * In the Registry Editor on the left hand side, you will see the navigation pane. Using your mouse or keyboard, navigate to the following subkeys:
    * HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems
    * HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Windows
    * Right click on each of the subkeys above in the left hand pane and from the context menu that appears, choose the “Export” option. Save the exported registry data file where ever you wish, but make sure that it will be accessible should we need to restore the files.
“OK, I’ve backed everything up! Now what!?”
Don’t quit the Registry Editor just yet - we still need to make some modifications in order to increase the handle limits in Windows.
With the Registry Editor opened, navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems. You will notice a set of “REG_MULTI_SZ” and “REG_EXPAND_SZ” keys in the right hand pane. The one that we are interested in modifying is called “Windows”.
To modify the key, double click on it. It should look something like this:
%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
The section of this string we are interested in modifting is “SharedSection”.
In the SharedSection part of the string you will notice 3 numbers. What we are interested in is the middle value, “3072?. Modify this value so that the middle number is “8192?.
It should look something like this after modifying the value:
   %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,8192,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
Now that we’ve changed this, lets continue, shall we?
In the left hand pane of the Registry Editor, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows. In the right hand side, you will see two REG_DWORD values, named “GDIProcessHandleQuota” and “USERProcessHandleQuota”. We will need to modify both of these.
The first key we will want to modify is “GDIProcessHandleQuota”. This keys value can be set between 256 and 16,384 (maximum), and the default value is 10,000. I’d recommend using 15,000 as a value for this key, however if you are doing a lot of multitasking, shoot for the stars and go with 16,384.
This key can not be set past 16,384 as it is the maximum acceptable value.
Now, lets modify “USERProcessHandleQuota”. This keys value can be set between 200 and 18,000 (maximum), with a default value of 10,000. I’d recommend increasing this value to the same number used with “GDIProcessHandleQuota”, however as previously mentioned if you are working with a hefty application workload, shoot for the stars and go wth the maximum value of 18,000.
This key can not be set past 18,000 as it is the maximum acceptable value.
Do NOT attempt to increase these values past the maximum - Windows will become very unstable and may even stop working correctly. If Windows starts acting up after changing these values, lower them until the issues are resolved, or restore the backups of these keys’ values that we created before making modifications.
Now that you’ve changed these values, restart your computer and tax the system using the Internet Explorer trick mentioned previously - open Internet Explorer and hold down Ctrl+N on your keyboard to open up new Internet Explorer windows. Continue this until menus, buttons, and user interface elements stop working correctly. Also, open any applications you run day-to-day while you are performing this, so that you can get more of an idea if you have everything configured correctly.
You may also want to monitor your memory usage and handles information in Task Manager to see whether or not the above registry values need any more modifications.
I hope this helps with any multi-tasking issues you may have run into while running Microsoft Windows, now get back to work!

You work like I do. It's very cool that you published this fix for XP people, but yow, what a lot of detailed things to check/set! Seems like it might just be simpler just to move up to Windows 7...
-Noel

(Possible solution found) Can my wife and I use the same Lion DL even with two separate Apple IDs?

EDIT: Sorry; original search terms didn't give me my answer. I think I found a solution though. Will update whether it works out.
My wife and I each have our own MBPs, and we each have our own Apple IDs that pre-existed our marriage. Apple doesn't make it easy to have one family account with subaccounts managed underneath this, and we don't want each others iTunes purchases populating our libraries.
Is it possible for me to DL and install Lion with my Apple ID, copy it to hers, and install it there with my same info yet still allow her to use her own ID for other things? Or will we need separate IDs for each download?
Message was edited by: super reubs

iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189
Chris CA's instructions on sharing one iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - Multiple users using a single library file - similar post at: https://discussions.apple.com/thread/3753008
Suggestion by Turingtest for multiple users and one library - http://discussions.apple.com/message/9117622 - use smart playlists and tags to isolate groupings.
Discussions on using purchases from multiple AppleIDs in one iTunes library - https://discussions.apple.com/message/19543804

"Adobe has found a solution or workaround for the recent crash in Adobe Flash CC" ...not really.

Hi guys,
My Flash CC crashes all the time, it's always been doing it since when I started using it on CS4, and I've somewhat given up on this bug being fixed, it crashes at least 20-30 times every document I create. I'm using a Wacom Bamboo Fun Pen&Touch tablet and drawing a lot, I think the problem is that it can't handle this much drawing.
Anyways, it just crashed and for the first time after reopening I found this nice message from Flash:
"Adobe has found a solution or workaround for the recent crash in Adobe Flash CC.
Please click here for further details."
Excited, I clicked on it! At last, a solution! Amazing!
...but it just points to http://www.adobe.com/
... I don't understand.
What's happening? I'm genuinely puzzled.
Also, anybody else experiencing frequent crashes?
Thanks!
Ciao!

Yes, this is not good -- you're already mad when it crashes, then "We found a solution!" But, for me clicking on the link does nothing - no link even to adobe, just a tease - nothing opens.
It's bad enough crashing a couple times a day and losing work (I do save every chance I get), but then to get taunted with this bogus message, it's discouraging and exactly the best 'user experience' for a really expensive product from company that is all about helping professionals create good design/user experience ..
I like the way this is headed though! it just doesn't work right now.

24" Cinema display is flickering every 30 seconds or so. Has anyone found a solution?

I have a 2009 Power Mac tower with a 24" cinema display also 2009. About a year ago the display started flickering, like it was turning on and off. I've got a duel display set up and the other one (older acrylic 20") works fine. I've checked the cords, updated to the latest soft wear, at least I think I have. I see others having the same issue. Has anyone found a solution? This is really annoying when trying to do graphics work. Any help would be much appreciated

Hi 517 Design,
Thanks for visiting Apple Support Communities.
If you are seeing flickering on your Cinema Display, you can find many additional troubleshooting tips in this guide that can be helpful:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Best Regards,
Jeremy

Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

Has anyone found a solution to the issue of default email account on iPhone continually changing?

I am seeing an irritating problem with the default mail account, calendar and contacts list on my iPhone 4.
Every so often (I think it happens randomly after syncing or even just connecting the iPhone to my iMac without syncing) I notice that some or all of my default email account, calendar and contacts list have changed away from my desired default (which is my Exchange account).
The iPhone is running iOS 4.3.5 (8L1) and I'm using iTunes 10.4.1 on my iMac.
I found this discussion: https://discussions.apple.com/thread/1639451 dating back 2 years to the days of iOS 2.1 without any solution. Googling hasn't helped me find any answers yet.
I have 5 accounts set up on the iPhone - a MobileMe "Find my phone" account that's only used for that purpose, not email, a GMail account, a couple of vanilla IMAP accounts and my main, Exchange 2010-based account that I use for mail, contacts and calendar.
Most frequently after a change I find that the default email has switched to the GMail account, the calendar and contacts lists have switched to my iPhone and most of my Exchange account mail folders are empty and have to re-sync when I tap on them.
I know from Googling that other people have been seeing similar issues.
Has anyone found a workaround or solution?

Has no one found any solutions to this?
Or at least what causes it (so that it might be avoided)?
I find it difficult to believe this issue has existed so long in iOS without being addressed!

Anyone found a solution to the corrupt preferences issue: CS4?

Soooo, annoying. I don't understand how Adobe can have 20+ years of experience with Illustrator and still not have fixed a few simple things. I keep getting the corrupt preferences warning every time i open ill. I can't find any solutions anywhere for this. What is the deal?
If anyone can let me know how I can take care of this annoyance I would really appreciate it. It's driving me crazy.

Sorry, ya. Silly me.
Windows XP Pro. Running as admin.
I've deleted the settings folder. No effect. If I reboot Ill will present the same warning. If I close Illustrator for a couple hours, same thing. It's a common problem. I've seen plenty of people on the web complaining about it, including on this forum, but have never found any solutions that work. The common suggestion is to either move the settings folder or delete it altogether and have illustrator rewrite the pref file but like most other people out there, that hasn't worked. The issue is recurring. The other is to delete the pref file upon illustrator start up. Still same issue. No matter what, when illustrator closes it corrupts the pref file or when it opens it doesn't recognize the pref file as valid. Quite annoying. So, my recent files don't show up, my keyboard shortcuts, gone, my scratch disk settings, units, all of that has to be redone everytime. My workspace is unaffected though. So really, it's just the pref file. It really is quite annoying. Any help from anyone would be greatly appreciated.

HP PSC 2355 Has anyone found a solution that worked ?

Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a lot of headaches setting it up. Seemingly, after downloading a latest 10.4 up-grade, I lost all functions with this 3 in 1 printer. I’ve done all the procedures on the HP site, purged everything HP on my computer relating to applications, and re-installed the software. However, the printer does not show up on the ‘Printer List’ in the ‘Printer Setup Utility. Error message stating that ‘No default Device Detected’ or, Error ‘Sorry, scanner could not be initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X (10.4.7) iMac G5 1.8GHz, 20in.

Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a
lot of headaches setting it up. Seemingly, after
downloading a latest 10.4 up-grade, I lost all
functions with this 3 in 1 printer. I’ve done all the
procedures on the HP site, purged everything HP on my
computer relating to applications, and re-installed
the software. However, the printer does not show up
on the ‘Printer List’ in the ‘Printer Setup Utility.
Error message stating that ‘No default Device
Detected’ or, Error ‘Sorry, scanner could not be
initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X
(10.4.7) iMac G5 1.8GHz, 20in.
I am not sure if you are having the same issue or not since you did post this back in Dec but itf it is still a ongoing problem after downloading updates to the Mac OS follow this docuemnt --------------------------------------------------> http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=422000&dlc=en&lang=en
And by the sounds of it i know you have gone though this document already
Download this driver it is the lates driver and it fixes alot of things
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=422000&lang=en&softwareitem=mp-42125-1
G4 Mac Mini Mac OS X (10.4.7)

I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it. Has anyone found a solution for this?

I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it.
Is there an email app that I can use?
Has anyone found a solution for this?

This seems to be an annoying part of the newer OS. When I first got my Pearl in 2008, I didn't have that occur. However once the OS got upgraded, and now with the Tour, it seems like that is the way it works. Not clear to me why they would have thought this is preferable.

Crossing my fingers..found a solution to MMS issue on the LG G2

Similar Messages

Maybe you are looking for