Crvs 2010 beta - Chart shortcut menu issues

Hello,
In a previus message (see CRVS2010 beta - Chart Options dialog box), I referenced one option on the chart shortcut menu that opens the Chart Options dialog box that was not working properly.
The other 2 other options on the same shortcut menu option open dialog boxes that have the same problem.
When you right-click on a chart, select Chart Options - -> Template (which opens the Choose a chart type dialog box. I only see one tab. In crvs2008, it had 2 tabs, Gallery and Custom) and  Chart Options - -> Titles (which opens the Title dialog box) and you will see what I am referring to.
I'd like to know if all 3 of the dialog boxes that these menu options open, will be fixed when the next beta is released?
Thank you
Tracy
I added the names of the dialog boxes that need to be fixed - Edited by: training 2go on Jul 14, 2010 7:04 PM

Hi Don,
I understand your question, but maybe not.
The chart type doesn't seem to matter. I just opened bar, area and cross-tab chart reports and the problem is there.
Open a report that has a chart.
When I right-click on a chart on the main report window, I see a shortcut menu.
One of the options on this shortcut menu is "Chart Options".
When you hold the mouse pointer over the chart options option, I see three options - template, general and titles.
I am referring to the dialog boxes that each of the 3 options (template, general and titles) opens.
They display the programming name for the field.
For example, if you select the general option, the Chart Options dialog box opens.
Normally, in the title bar you would see "Chart Options". Instead "_ e _ Chart Option _ n _ psedoloc _ " displays in the title bar.
The same issue applies to all of the objects on the dialog box.
I think that this is an easy fix, because the program is pointing to the wrong field in the table, what I call the internal name for the object, instead of what I call the display name.
Let me know if this helps.

Similar Messages

  • Crvs 2010 beta - Numeric axis grids & scales dialog box for charts

    Hello,
    The dialog box was in crvs2008, but I don't see it in crvs2010 beta. Has it been removed or just moved and I can't find it?
    It was off the chart shortcut menu (when you right-click on a chart in design view) under the Chart Options menu option.
    Thank you
    Tracy

    Hi Don,
    I am not referring to the Chart Expert.
    If you open a report that has a bar chart in crvs 2008 and follow the info below, you should see it.
    In crvs 2008, when you right-clicked on a chart, the shortcut menu has an option called "grid".
    When you select the grid option, the numeric axis grids & scales dialog box opened.
    It has the following tabs across the top - general, scales, labels, numbers and grids.
    On the left it has 2 tabs: data axis and group axis.
    Thank you
    Tracy

  • CRVS 2010 beta 2 - check for update options

    Hello,
    In beta 1 on the Crystal Reports menu were 2 options to check for updates for the software.
    I noticed in beta 2 that both options have been removed. I looked around the application but did not see the options someplace else.
    Is there something new in the works to be able to check for updates when the product goes live?
    Thank you
    Tracy

    Hi Ludek,
    I understand that the check for update options won't work now. What is confusing is that the options were in beta 1, even though they didn't work and now in beta 2, they were removed.
    Are you saying that the options will be put back in for the final release? If so, from a programming perspective, it doesn't make sense to remove them to only have to pur them back, or am I missing something?
    Let me know.
    Thank you
    Tracy

  • CRVS 2010 Beta - Crystal Reports for Visual Studio 2010 Beta

    Can someone please post a working solution for deploying Crystal Reports with VS2010. i've been through the docs explaining how to implement it however it still doesn't work for me. a working solution .ZIP file that displays a report would help everyone. The error i get it (and i can't compile)
    Retrieving the COM class factory for component with CLSID {D7F5D7C3-B06C-4CAC-BC47-A06E66D2EE9B} failed due to the following error: 80000003 One or more arguments are invalid (Exception from HRESULT: 0x80000003).

    Hi
    I read that CR2010 beta can be deployed with VS2010 with the CR2008 runtime. Also the getting started guide syas that
    Link no longer available (deleted)
    why should i wait until it goes to RTM, will it work or not, please elaborate.
    Thanks
    Message was edited by: Jason Lax

  • CRVS 2010 beta - Crystal Reports Beta 2 for VS 2010 fails to start

    Right after I install it. I try to add a Crystal Reports item to my project and get an error indicating that the temporary report (.rpt) file can not be oppened. When I click OK I get a seccond error message "invalid key".
    I tried reinstalling Crystal Reports and then Visual Studio with out success. This was working on the same laptop when using Vista, now I have Windows 7. But on my Windows 7 PC works ok.
    Please help
    Formated subject to meet the rules
    Edited by: Don Williams on Oct 2, 2010 11:06 AM

    Have you search forums for possible solutions before posting?
    Typically this is caused by not setting/using the 4.0 framework ( not the client version ) or instlaling with DEP and UAC disabled.
    Make the changes to security and then do a repair install.
    Thank you
    Don

  • CRVS 2010 beta - SQL error 4502 (on previous runtimes the report works)

    I'm testing the new 2010 runtimes.
    Almost every report work except some.
    In one of them I obtain an error 4502 (View or function has more column names specified than columns defined) and I can't explain why.
    Doing "verify database" on the report it seems ok. Running it with previous runtimes gives no problem.
    Any hint or something to check?
    Maybe the query that CR sends to SQL Server is wrong.. but how can I check without CR2010?
    In CR11.5 it's correct.
    Thanks

    this is the "show query" for the main report (cr2008)
    SELECT "ProSerAll"."FKCodPro", "ProSerAll"."DesPro", "ProSerAll"."Des2Pro", "ProSerAll"."CodIvaVenPro", "ProSerAll"."CodSosPro", "ProSerAll"."CtlStaPro", "ProSerAll"."ImpPro", "ProSta"."AnnRifSta", "ProSta"."QtaGenSta", "ProSta"."ValGenSta", "ProSta"."ValFebSta", "ProSta"."QtaFebSta", "ProSta"."ValMarSta", "ProSta"."QtaMarSta", "ProSta"."ValAprSta", "ProSta"."QtaAprSta", "ProSta"."ValMagSta", "ProSta"."QtaMagSta", "ProSta"."ValGiuSta", "ProSta"."QtaGiuSta", "ProSta"."ValLugSta", "ProSta"."QtaLugSta", "ProSta"."ValAgoSta", "ProSta"."QtaAgoSta", "ProSta"."ValSetSta", "ProSta"."QtaSetSta", "ProSta"."ValOttSta", "ProSta"."QtaOttSta", "ProSta"."ValNovSta", "ProSta"."QtaNovSta", "ProSta"."ValDicSta", "ProSta"."QtaDicSta", "ProSerAll"."FKAnaAzi", "ProSerOrdFor"."DatUltOrdFor", "ProSerOrdFor"."QtaUltOrdFor", "ProSerAll"."IDPro"
    FROM   ("WinCodyDB"."dbo"."ProSerAll" "ProSerAll" INNER JOIN "WinCodyDB"."dbo"."ProSta" "ProSta" ON ("ProSerAll"."FKAnaAzi"="ProSta"."FKAnaAzi") AND ("ProSerAll"."IDPro"="ProSta"."FKIDPro")) INNER JOIN "WinCodyDB"."dbo"."ProSerOrdFor" "ProSerOrdFor" ON ("ProSerAll"."FKAnaAzi"="ProSerOrdFor"."FKAnaAzi") AND ("ProSerAll"."IDPro"="ProSerOrdFor"."FKIDPro")
    ORDER BY "ProSerAll"."FKCodPro", "ProSta"."AnnRifSta"
    Subreport 1 ("TEST" and "1" were subreport paramenters I input manually when I did "show query):
    SELECT "LisRig"."Qta1LisRig", "LisRig"."Qta2LisRig", "LisRig"."Qta3LisRig", "LisRig"."Qta4LisRig", "LisRig"."Qta5LisRig", "LisRig"."PreEur1LisRig", "LisRig"."PreEur2LisRig", "LisRig"."PreEur3LisRig", "LisRig"."PreEur4LisRig", "LisRig"."PreEur5LisRig", "LisRig"."FKNumLisRig", "LisRig"."FKCodProLisRig", "LisRig"."FKAnaAzi"
    FROM   "WinCodyDB"."dbo"."LisRig" "LisRig"
    WHERE  "LisRig"."FKNumLisRig"=1 AND "LisRig"."FKCodProLisRig"=N'TEST' AND "LisRig"."FKAnaAzi"=1
    Subreport 2 (same as above for "TEST" and "1")
    SELECT "ProStaAnnEse"."FKCodProSta", "ProStaAnnEse"."TotCarValSta", "ProStaAnnEse"."TotCarQtaSta", "ProStaAnnEse"."NumCarValSta", "ProStaAnnEse"."NumCarQtaSta", "ProStaAnnEse"."NumScaValSta", "ProStaAnnEse"."NumScaQtaSta", "ProStaAnnEse"."TotScaValSta", "ProStaAnnEse"."TotScaQtaSta", "ProStaAnnEse"."EsiAttSta", "ProStaAnnEse"."EsiIniSta", "ProStaAnnEse"."FKAnaAzi"
    FROM   "WinCodyDB"."dbo"."ProStaAnnEse" "ProStaAnnEse"
    WHERE  "ProStaAnnEse"."FKCodProSta"=N'TEST' AND "ProStaAnnEse"."FKAnaAzi"=1
    ORDER BY "ProStaAnnEse"."FKCodProSta"
    Subreport 3 ("1" and "1" were parameters)
    SELECT "CosGen"."CosPre", "CosGen"."CosUlt", "CosGen"."CosMed", "CosGen"."FKAnaAzi", "CosGen"."FKIDPro"
    FROM   "WinCodyDB"."dbo"."CosGen" "CosGen"
    WHERE  "CosGen"."FKAnaAzi"=1 AND "CosGen"."FKIDPro"=1
    Can't be more detailed than this.

  • Powerpoint chart created in office2013 is showing the word "VALUE" in versions of 2010 powerpoint... compatibility issue?

    Hello,
    A user created a chart in powerpoint 2013 that shows up great. When a user opens the chart in 2010, certain values show up as [VALUE] instead of the number. The number is clearly there in excel. Is this a bug or is there something the user is doing wrong?
    (sorry for the blurry powerpoint2010 picture)

    Hi,
    How did the user create the chart? Did only the chart occur the issue?
    Create the chart the Excel and copy it to PowerPoint 2013.
    Create the chart directly in PowerPoint 2013.
    I had tested both of the two ways and it displayed correctly in PowerPoint 2010.
    Thus, I recommend you follow the below steps to check the issue:
    1. Create a new create with new data to test again. If every chart occurs the issue, I recommend you check the PowerPoint 2010.
    Start PowerPoint 2010 in safe mode. If it works fine, the issue may be caused by the add-ins, please check the add-ins one by one.
    Upgrade the Office 2010 patches and repair Office 2010.
    2. If the issue only occur in the chart, please try to copy the chart to a blank PowerPoint 2010 or follow the below link to re-create the chart the test.
    http://office.microsoft.com/en-us/powerpoint-help/add-a-chart-to-a-presentation-HA102809565.aspx
    If the issue still exists, please upload a sample presentation include the chart through OneDrive, I'll test in my environment.
    Regards,
    George Zhao
    TechNet Community Support

  • Image Run-Time Shortcut Menu

    OK, more on the non-standard behavior of Image Controls (in LV 2009 SP1 at least)...
    Having had to deal with the fact that one cannot detect a user right click in an Image Control, I figured that maybe I could at least build my own shortcut menu (the one that pops up when you right-click on an object). Not such luck without loosing some functionalities.
    If you do so, you loose most items that are available by default at runtime (these are called the application items for any other controls):
    - Palette
    - Save Image...
    - Clear ROI
    - Zoom to Fit
    I could rebuild all these functionalities in my custom menu, but:
    1) why should I have to do that?
    2) why do the items above not appear when one opens the default run-time shortcut menu? They do appear at run-time!
    3) why do ALL other shortcut menu items available at edit time (some of which could be handy at run-time) not appear when one opens the default run-time shortcut menu?
    4) At run-time, none of the menu items listed above are returned in the event structure when polling the Shortcut Menu Selection events (either App or User). Why????
    Thanks for reading.

    VTHokie wrote:
    Hi Xavier,
    You can keep an eye out for CAR numbers in the known issues lists as they are published with software patches and releases, but especially in the bug fixes lists to see if a specific CAR has been remedied in that release.
    - Greg J
    Greg, neither of those lists contain references to issues within Vision Development Module... 
    If you are looking for a similar style list for Vision, the only location these are currently published is in the release notes for each release, such as here:
    http://ftp.ni.com/support/softlib/vision/Vision%20Development%20Module/2010/readme.html
    Also, I found reference to a VDM-specific known issues list here:
    http://zone.ni.com/devzone/cda/tut/p/id/11942
    Eric

  • Cant uninstall Click to run MS Office 2010 beta

    Trying to upgrade MS office 2007 to 2010, it won't allow me to install. It says it can't upgrade a beta version of 2010, so uninstall to continue.
    When I try to install the upgrade I get a setup error which states "setup is unable to proceed due to the following errors: Microsoft Office 2010 does not support upgrading from a pre release version of Microsoft Office 2010. You must first uninstall
    any pre release version of Microsoft Office 2010 products and associated technologies. Correct the issues listed above and re run setup."
    So I then go into my control panel under programs and uninstall or change a program, the only thing I find related is Microsoft Office click-to-run 2010 beta. When I try to uninstall this I get this message, under click to run application manager it says
    "the action cannot be completed. Try the action again. If the problem continues, contact Microsoft product support."
    Any ideas on how to proceed?

    sorry, i have find out the root cause of this issue
    i changed winecfg version to win7, last night. it became normally after i changed it back to XP.
    BTW , office 2010 needs msxml6 and office 2007 needs msxml3 , they are different .dont make it wrong.
    though office 2010 works fine , but @thisllub , you are right , activation is still broken.

  • How to create a shortcut menu in the VIEW panel of Diadem

    Hi everyone,
    Is it possible to create your own shortcut menu in the VIEW Panel of Diadem? 

    Hi Ovidius,
    What do you mean by "shortcut" menu?  You can add a custom menu to the top of any DIAdem panel and fill it with whatever menu items you want.  You can also add/customize any icons at the top or the left of any DIAdem panel and program them to do what you want.  There is additionally limited support in DIAdem 2010 and prior versions for adding custom context menus to VIEW areas.  We are looking into expanding this support for DIAdem 2011.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Copy picture of graph to clipboard through run-time shortcut menu

    Hi,
    I have following problem. I would like to copy picture of graph to clipboard through graph “run-time shortcut menu”. It’s easy when I want copy exactly what I see. There is an Item Tag: APP_SC_COPY_DATA. That works nice. Try an example1.vi. (Run then right click on the graph...)
    But problem is when I want to change the graph appearance before copying (only change the colour of the graph to be more printer-friendly). I have created a subVi with copy of the graph with changed colour. But how to simulate for the graph inside the subVi same runtime shortcut event? How to call APP_SC_COPY_DATA of subVi graph from outside Vi?
    I hope I’ve explain it clear.
    If you have better method for clipboard copying tell me.
    ThanksMessage Edited by jochynator on 08-03-2006 11:48 AM
    jochynator
    LV 8.0.1, WinXP Pro
    Attachments:
    examples.zip ‏37 KB

    You should use GetImage Not ExportImage.
    I modified you VI.
    George Zou
    http://gtoolbox.yeah.net
    George Zou
    http://webspace.webring.com/people/og/gtoolbox
    Attachments:
    export.vi ‏14 KB

  • Report Viewer 2010 Column chart Side Margin

    Hi,
    In Report Viewer 2010 Column chart, there is a side margin between x-axis and first column. There is only option to Enable or Disable it but i would like to have this with some small width or custom value.
    How can i reduce side margin in Report Viewer 2010 Column chart?
    Regards,
    RajeshPuniya

    Hi RajeshPuniya,
    In Reporting Service, we can only enable or disable the side margins on the X-Axis of the chart. There is no such feature support us to customize the width of the side margin.
    Personally, I understand your feeling and how frustrated when you find this issue. So, it is my pleasure to help you to reflect your recommendation to the proper department for their consideration. Please feel free to submit your situation on our product
    to the following link:
    https://connect.microsoft.com/SQLServer/Feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
    Thank you for your understanding.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Cannot Access Shortcut Menu for Adding Input/Output in Formula Node

    This is a wierd problem. I cannot access the shortcut menu in formula node. I right click the border, nothing happens. Anyone run into this before? Is there any other way to add inputs and outputs?
    I am running Vision Builder AI and want to use a formula node in my calculator tool.
    Solved!
    Go to Solution.

    As the saying goes, "when you hear hoofbeats, think horses and not zebras".  Let's get a few things out of the way.
    Is the VI in edit mode?
    Is autotool on?
    Drop a fresh FN on a New VI and try it again.
    The only other way I know to add/remove inputs is scripting, let's not go there.
    I have had a few issues with context menus, very few which persisted past a LV and/or computer restart, so I won't rule out a zebra just yet.

  • CRVS2010 Beta - Can't use the the Runtime for VS 2010 Beta

    Hi,
    I changed my web.config as described in the PDF but I'm always getting this error message:
    Assembly 'my Assembly' uses 'CrystalDecisions.Web, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' which has a higher version than referenced assembly 'CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
    What's wrong?
    Thanks,
    Michael
    Edited by: MGuder on Apr 22, 2010 11:53 AM
    Edited by: Jonathan Parminter on Apr 22, 2010 7:47 AM

    Hi Guys,
    Are you using the VS 2010 CR for VS2010 plug in and if so is this a Beta issue?
    Or are you using a previous versions of CR runtime in VS 210 issue?
    If it is a VS 2010 and CR plug issue then the subject line needs to be changed to follow the rule for posting beta questions to:
    CRVS2010 Beta - Can't use the the Runtime for VS 2010 Beta
    If it's a migration of existing CR 2008 or previous version of CR application into VS 2010 then it's not supported. CR 2008 and previous versions of CR have not been tested with 4.0 framework and therefore it will not work and no escalation path to make it work at this time, don't upgrade your old projects.
    Thank you
    Don
    Sorry I see Jonathan has already changed the title.
    Edited by: Don Williams on Apr 22, 2010 7:52 AM

  • Microsoft Office 2010 Beta

    I recently downloaded Office 2010 beta. While I am unable to print print internet pages fine but anything I complete in Word. Excel or Powerpoint is giving me problems.  Every time I attempt to print from these programs the printer menu continuously says it is spooling and the information never reaches the printer.  For me to remove the print jobs I have to reboot my system. It is getting me very frustrated.

    One thing to check would be the printer selection.  Office 2010 may not properly select the default printer as default.  Goo to File, Print and check the printer settings to make sure your printer is selected.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Problem setting the PoolList attribute in a WLST script

    Hello ! I ran the configToScript command over config.xml which has a JDBCMultipool composed of two JDBCpools. It threw the next script to create the JDBC Multipool: print 'configuring resource: JDBCMultiPool/MyJDBC MultiPool ' try: myResource = creat

  • Why are my clips red?

    When I upload a clip of something I recorded from my camera I get a red screen. I can hear the sounds from the clip but I can't see anything I recorded. This isn't making any sense to me. I've read through most of the help section and I've tried anyt

  • IOS4 and video out

    We normally connect our iPhones (both 4 and 3G) to a screen using the composite video cables. Recently, the static image on the phone has "shifted" upwards such that the top is no longer visible. Which means the scrub bar has disappeared as well. Any

  • Best practice to NOT transport reports?

    Hi, I was once told that it was best practice NOT to transport reports, templates, process chains and packages. (BW 3.5). These objects changed so often that you would spend to much time transporting. Now I have heard from others that it is usual to

  • Can I change a key value?

    Is there some Processor that can be used to change a key value for a cache entry? Or do I have to do a get and a put with the new key? Thanks, Andrew