CRVS 2010 beta - SQL error 4502 (on previous runtimes the report works)

I'm testing the new 2010 runtimes.
Almost every report work except some.
In one of them I obtain an error 4502 (View or function has more column names specified than columns defined) and I can't explain why.
Doing "verify database" on the report it seems ok. Running it with previous runtimes gives no problem.
Any hint or something to check?
Maybe the query that CR sends to SQL Server is wrong.. but how can I check without CR2010?
In CR11.5 it's correct.
Thanks

this is the "show query" for the main report (cr2008)
SELECT "ProSerAll"."FKCodPro", "ProSerAll"."DesPro", "ProSerAll"."Des2Pro", "ProSerAll"."CodIvaVenPro", "ProSerAll"."CodSosPro", "ProSerAll"."CtlStaPro", "ProSerAll"."ImpPro", "ProSta"."AnnRifSta", "ProSta"."QtaGenSta", "ProSta"."ValGenSta", "ProSta"."ValFebSta", "ProSta"."QtaFebSta", "ProSta"."ValMarSta", "ProSta"."QtaMarSta", "ProSta"."ValAprSta", "ProSta"."QtaAprSta", "ProSta"."ValMagSta", "ProSta"."QtaMagSta", "ProSta"."ValGiuSta", "ProSta"."QtaGiuSta", "ProSta"."ValLugSta", "ProSta"."QtaLugSta", "ProSta"."ValAgoSta", "ProSta"."QtaAgoSta", "ProSta"."ValSetSta", "ProSta"."QtaSetSta", "ProSta"."ValOttSta", "ProSta"."QtaOttSta", "ProSta"."ValNovSta", "ProSta"."QtaNovSta", "ProSta"."ValDicSta", "ProSta"."QtaDicSta", "ProSerAll"."FKAnaAzi", "ProSerOrdFor"."DatUltOrdFor", "ProSerOrdFor"."QtaUltOrdFor", "ProSerAll"."IDPro"
FROM   ("WinCodyDB"."dbo"."ProSerAll" "ProSerAll" INNER JOIN "WinCodyDB"."dbo"."ProSta" "ProSta" ON ("ProSerAll"."FKAnaAzi"="ProSta"."FKAnaAzi") AND ("ProSerAll"."IDPro"="ProSta"."FKIDPro")) INNER JOIN "WinCodyDB"."dbo"."ProSerOrdFor" "ProSerOrdFor" ON ("ProSerAll"."FKAnaAzi"="ProSerOrdFor"."FKAnaAzi") AND ("ProSerAll"."IDPro"="ProSerOrdFor"."FKIDPro")
ORDER BY "ProSerAll"."FKCodPro", "ProSta"."AnnRifSta"
Subreport 1 ("TEST" and "1" were subreport paramenters I input manually when I did "show query):
SELECT "LisRig"."Qta1LisRig", "LisRig"."Qta2LisRig", "LisRig"."Qta3LisRig", "LisRig"."Qta4LisRig", "LisRig"."Qta5LisRig", "LisRig"."PreEur1LisRig", "LisRig"."PreEur2LisRig", "LisRig"."PreEur3LisRig", "LisRig"."PreEur4LisRig", "LisRig"."PreEur5LisRig", "LisRig"."FKNumLisRig", "LisRig"."FKCodProLisRig", "LisRig"."FKAnaAzi"
FROM   "WinCodyDB"."dbo"."LisRig" "LisRig"
WHERE "LisRig"."FKNumLisRig"=1 AND "LisRig"."FKCodProLisRig"=N'TEST' AND "LisRig"."FKAnaAzi"=1
Subreport 2 (same as above for "TEST" and "1")
SELECT "ProStaAnnEse"."FKCodProSta", "ProStaAnnEse"."TotCarValSta", "ProStaAnnEse"."TotCarQtaSta", "ProStaAnnEse"."NumCarValSta", "ProStaAnnEse"."NumCarQtaSta", "ProStaAnnEse"."NumScaValSta", "ProStaAnnEse"."NumScaQtaSta", "ProStaAnnEse"."TotScaValSta", "ProStaAnnEse"."TotScaQtaSta", "ProStaAnnEse"."EsiAttSta", "ProStaAnnEse"."EsiIniSta", "ProStaAnnEse"."FKAnaAzi"
FROM   "WinCodyDB"."dbo"."ProStaAnnEse" "ProStaAnnEse"
WHERE "ProStaAnnEse"."FKCodProSta"=N'TEST' AND "ProStaAnnEse"."FKAnaAzi"=1
ORDER BY "ProStaAnnEse"."FKCodProSta"
Subreport 3 ("1" and "1" were parameters)
SELECT "CosGen"."CosPre", "CosGen"."CosUlt", "CosGen"."CosMed", "CosGen"."FKAnaAzi", "CosGen"."FKIDPro"
FROM   "WinCodyDB"."dbo"."CosGen" "CosGen"
WHERE "CosGen"."FKAnaAzi"=1 AND "CosGen"."FKIDPro"=1
Can't be more detailed than this.

Similar Messages

SSRS Subscription error "An error occurred during rendering of the report"

I have created a subscription that will place a report on a file share. When the subscription runs to build an excel file and put it on the shared drive, it gives the following error: An error occurred during rendering of the report.
Problem is that some time subscription run successfully and sum time it give error: An error occurred during rendering of the report.
Help me
Mehmood G

When i subscribe report with xls format it complete successfully but when i subscribe report with xlsx then above error occur. i am not understanding problem help me..
i am using sql server 2008 R2
An error occurred during rendering of the report. --->
Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException:
An error occurred during rendering of the report. --->
Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An
error occurred during rendering of the report. --->
System.IO.IsolatedStorage.IsolatedStorageException: Unable to determine the
identity of domain.
Mehmood

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

An error has occurred while loading the report

Hello all,
I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop:
An error has occurred while loading the report. Please contact technical support.
Has anyone else run into this problem?
Thanks!

Hello Eddie,
please post some more information about your problem.
What is the name of your CRM app?
Who developed this app?
Did it never work or do you get this error only now?
Always or only sometimes only?
In what versions and on what patchlevel are you working ?
Thanks for some more info
Falk

Custom code throws error with email subscription. Otherwise, the report works fine.

I have a SSRS report that parses RTF to TXT and displays it in a report. The report works fine and everything displays correctly. The subscription email, however, contains a report with errors: Request for the permission of type
'System.Security.Permissions.UIPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
The report contains embedded code as well as references to System.Security and System.Windows.Forms. I've updated .....\Reporting Services\ReportServer\rssrvpolicy.config and ....\Reporting Services\ReportManager\rsmgrpolicy.config to change permissions
to FullTrust. Not sure what else I need to do. Please help.

Hi Chimuelo,
According to your description, if the report contains custom code and assemblies, the subscription email contains an error “Request for the permission of type 'System.Security.Permissions.UIPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
failed”.
In your scenario, the issue could cause by that the report can’t access those assemblies. Please modify the policy configuration files to grant additional permissions for those assemblies. For more information, please refer to this article:
How to grant permissions to a custom assembly that is referenced in a report in Reporting Services.
Similar thread for your reference:
Custom assembly throwing #error in reports with subscriptions
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

CRVS 2010 Beta - Crystal Reports for Visual Studio 2010 Beta

Can someone please post a working solution for deploying Crystal Reports with VS2010. i've been through the docs explaining how to implement it however it still doesn't work for me. a working solution .ZIP file that displays a report would help everyone. The error i get it (and i can't compile)
Retrieving the COM class factory for component with CLSID {D7F5D7C3-B06C-4CAC-BC47-A06E66D2EE9B} failed due to the following error: 80000003 One or more arguments are invalid (Exception from HRESULT: 0x80000003).

Hi
I read that CR2010 beta can be deployed with VS2010 with the CR2008 runtime. Also the getting started guide syas that
Link no longer available (deleted)
why should i wait until it goes to RTM, will it work or not, please elaborate.
Thanks
Message was edited by: Jason Lax

Crvs 2010 beta - Numeric axis grids & scales dialog box for charts

Hello,
The dialog box was in crvs2008, but I don't see it in crvs2010 beta. Has it been removed or just moved and I can't find it?
It was off the chart shortcut menu (when you right-click on a chart in design view) under the Chart Options menu option.
Thank you
Tracy

Hi Don,
I am not referring to the Chart Expert.
If you open a report that has a bar chart in crvs 2008 and follow the info below, you should see it.
In crvs 2008, when you right-clicked on a chart, the shortcut menu has an option called "grid".
When you select the grid option, the numeric axis grids & scales dialog box opened.
It has the following tabs across the top - general, scales, labels, numbers and grids.
On the left it has 2 tabs: data axis and group axis.
Thank you
Tracy

SQL error when I execute a Bex report

Dear All,
I have a customer exit for an important BeX report. When the report runs, it throws me the below error.
"ORA-01795: maximum number of expressions in a list is 1000"
I understand this error and I refered note 568768 after going through the earlier forums. Everyone is suggesting to ask the Basis people to increase the tablespace and empty some filesystem and all. The Basis team at my end had a thorough check of the system and told that there is no such problem. Below is my customer exit ---:
WHEN 'EMPL_OP1'.
    IF i_step = 2.
      READ TABLE I_T_VAR_RANGE INTO loc_var_range WITH KEY VNAM = 'EDT_RFI'.
      select /BIC/CPS_EDATE /BIC/CPS_EFSQ /BIC/CPS_EMPL /BIC/CPS_EMPST
      from /BIC/ACPS_JOB00 into table it_job
      where /BIC/CPS_EDATE <= loc_var_range-low.
      LOOP AT it_job INTO wa_job.
        CLEAR l_s_range.
            l_s_range-low = wa_job-/BIC/CPS_EMPL.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
        clear:wa_job.
      ENDLOOP.
      refresh it_job.
    ENDIF.
The problem is occuring only in the line "APPEND l_s_range TO e_t_range" and there are no errors before that. That is - when 'e_t_range' is getting displayed. I never faced this problem for other reports and I am surprised why it is showing only records less than 1000. If my result set contains 1000 or greater records, it is giving the above dump. Guide me to optimise the code. I am sure someone might have faced this issue and were able to solve it.
Cheers........!!!!!
Srinivas

Hi,
Check this Note 996017 - More than 1000 entries in Selection.
Regards
Pcrao.

Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

We're using ASP.net with .Net 4, developing with Visual Studio 2012. We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service). The reports are
executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
We only receive this when running a report that uses expressions on a separate thread. I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
This didn't occur with the previous version of our application which used .net 3.5.

As mentioned, we are not using the Reportviewer control, we are rendering locally. Not certain if that would make a difference.
Also, I had tried using all the built-in accounts. Just for kicks I changed it to LocalSystem again, then reset IIS (see image below). I then tried to export the report in a worker thread and received the same error.
Here is the text from the exception:
Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
--- End of inner exception stack trace ---
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

Error RCIRAS0546, failure occured while the report was being processed

Hello all,
We use Crystal Reports 2008 V1 server on Linux. With 2 reports now we get the error when viewing the report from the Central Management Console (CMC)
"Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator. [RCIRAS0546]"
In de /var/log/messages, I get messages like these:
Sep 28 17:37:30 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report file 2:11154 (RCIRAS0568)
Sep 28 17:37:40 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report '10. LEN Rapportage per scenario (kapitaallasten, investeringen, algemene gegevens) (V1)' (id=11154) for user 12 (RCIRAS0567)
I tried several parameters on the CrystalReportsProcessingServer, like increasing/decreasing the Maximum Current Jobs and Number of Prestarted Children. None of these make a difference. Als the error occurred when viewing the report as Administrator.
The reports has a dynamic parameter, wtih content coming from the database (drop-down list). When selecting one value the report is viewing fine. With a selection of more values the error occurred. In Crystal Reports 2008 there is no problem.
I restarted the CRProcessingServer with -trace. In the trace I see the following lines:
It seems that several subprocesses start for retrieving data based on the parameter values.
After the crash of the first child, the above mentioned error occurs.
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:82) PageChildDesc constructor (id=3)
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:5489) doCreateChild() created a new child 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6814) cleanupChildren() starting
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||[ProcWorkerManager.cpp : 6854] RAS-CORE-METRICS (before cleanup) number of child processes = 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6979) child id=1 crashed
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6994) cleanupChildren() removing child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:101) PageChildDesc destructor (id=1)
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7028) cleanupChildren() marking as stopped: worker id=1 in child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorker.cpp:2703) stopping worker id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7168) cleanupChildren() ending
Does someone know this problem and what to do about this?
With kind regards,
Pim van Stam
SvSnet

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

Error in SUMCT while running the report!!

Hi guys,
I am getting following error...Dont understand why cannot use SUMCT..???
Previously when I used for another report.. I can run the report.
<b>The formula operation SUMCT is not allowed here (formula 484CS49UMN7V9G4MLDVL628O6)
Message no. BRAIN429
Diagnosis
Operator SUMCT is only allowed and sensible for structure elements.
UNIID = 484CS49UMN7V9G4MLDVL628O6
OPERA = SUMCT
OPER1 = 484CR5A490BMERJ00F7ND438M
OPER2 =
Procedure
Please correct the query.</b>
Pls give me an solution..

Hi
We are facing similar problem. Could you please let me know how you solved it?
Thanks in Advance.
Regards
Swapnil.

Error REP-0001 While starting the Report service

Hi
When trying to start the reports service from 9iAS, i am getting error message as "REP-0001 Unable to open the message file", and in the Window Title it shows "Message 16200 not found, No message file for product rw".
Regards
Ranganath

Hi,
You(The user) need to have access permission to read the mesg files. The DBA installing Reports will be able to run the reports.
Grant read access to rwus.msb and rwus.msg files on $ORACLE_HOME/reports/mesg/
Try to run it, should work.
Thanks,
Oracle Reports Team.

Error while saving model to the reporting repository with logical views

I have created a view object in the logical model based on objects from the logical model. When I try to save the model to the reporting repository, an error occurs.` If I remove the view object, I can successfully save the model to the reporting repository. Here is the log detail:
2012-03-01 14:00:50,419 [Thread-71] ERROR ReportsHandler - Error Exporting to Reporting Schema:
java.lang.ClassCastException: oracle.dbtools.crest.model.design.logical.AttributeView cannot be cast to oracle.dbtools.crest.model.design.logical.Attribute
     at oracle.dbtools.crest.model.design.logical.LogicalDesign.getObjectsWithMeasurements(Unknown Source)
     at oracle.dbtools.crest.exports.reports.RSMeasurements.export(Unknown Source)
     at oracle.dbtools.crest.exports.reports.ReportsHandler.export(Unknown Source)
     at oracle.dbtools.crest.swingui.ControllerApplication$ExportToReportsSchema$1.run(Unknown Source)
Any thoughts on what is wrong.
Thanks

Hi,
thanks for feedback.
Any thoughts on what is wrong.The program code is wrong - I logged bug for that.
Philip

Access Denied Error Message in KM for the report published from BI

Hi,
Whenever we publish a Report from Bex Report Designer using Bex Broadcaster the report is getting published in the right KM Folder we choose, but when we click that link with in KM and choose Details we get a message saying "Access Denied". Due to this error that link is invisible in the actual iview where my KM folder is displayed.
This Problem occurs only with Reports from Report Designer and not with Query from Query Designer and Web Templates from Web Application Designer.
The user I use in BI and EP is the same. I am the owner of the KM folder and so I have full access to the folder.
Is there any particular authorization required from BI side?
Thanks
Sathish

This forum supports setup of the .NET Framework itself.
For best suggestions on your web project configuration issue, I suggest you ask in a topical ASP.NET forum, here:
http://forums.asp.net/
This forum may be best:
http://forums.asp.net/26.aspx/1?Configuration+and+Deployment
Thank you for your understanding.

CRVS 2010 beta - SQL error 4502 (on previous runtimes the report works)

Similar Messages

Maybe you are looking for