Crystal: Hide part of the field

Hi there,
I need to hide part of the contents of a field, as shown in the example below:
Field Example: Description (remarks)
For the above example, I need to hide the information that come after the parentheses = (remarks). Only the Description should be displayed.
Thanks in advance.
Kind Regards,

Create a formula like this and use it on the report instead of the field:
Split({MyTable.MyField}, '(')[1]
"Split" will split the text from the field into an array based on where the "(" is and "[1]" will give you the first element in the array which will be all of the text prior to "(".
-Dell

Similar Messages

  • Mass changing for accrual object assignments part of the field profit_ctr

    Hi Experts,
    Does any one know about mass changing for accrual object assignments part of the field profit_ctr (profit center).
    How can we do this?
    Best Regarts.

    Hi,
    I have equal problem. How did you save him?
    Regards,Irena

  • Select Query: Part of the field

    Hello Experts,
    I have an issue.
    In my selection from one table T1, i need to select just lines that have the field F1 begins by some numbers. For example, all lines that have the field F1 like that '12345678xxxxx'. 
    The problem is: in my selection i can't use 'Like %' or a range with Option 'CP'  because the field F1 is a DECIMAL and not a CHAR!!
    In the fact, the field is in the format: 'AAAAMMJJhhmmss', and i want  all lines that have the date 'AAAAMMJJ'  irrespective of the hour.  The type of this field is DECIMAL 15.
    Do you have any idea how i can do it?
    Thank you in advance.

    Could you try to get all data say between 20081211000000 and 20081211235959 ?
    This may work to solve your problem.

  • Is it possible to hide part of the line in webI line chart

    I had webI line chart which is showing for 2 months data, and is it possible to hide the line for only first 10 days in the line chart and continue the line after 11 th day till the end?

    @rajesh:  I didn't understand why should we use Relativedate() function?can you please explain little bit more. Becuase the report has customer exit written such a way that if I run the report today it will show up previous 60 days
    For example:
    today is 04/06/2011
    so in the report date column has values and shows up like
    02/06/2011
    02/07/2011
    02/08/2011
    04/05/2011.
    So now I should hide/avoid/shouldn't show First 10 days. In example above 02/06/2011, 02/07/2011,02/08/2011.....like wise 10 days so till 02/16/2011 shouldn't be shown in the report. The beginning of the report should start from 02/17/2011 till 04/05/2011..
    Edited by: saathiyaa on Apr 6, 2011 9:31 PM

  • Conditionally hide and show the fields

    Hi,
    I want to make fields conditionally rendered true or rendered false on page load.
    Karthik

    Hi,
    803955 wrote:
    I want to make fields conditionally rendered true or rendered false on page load.public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
    super.processRequest(oapagecontext, oawebbean);
    ---Get the webBean of the items and set rebdered property true or false
    OAMessageStyledTextBean NameBean = (OAMessageStyledTextBean)oawebbean.findChildRecursive("nameId");
    if("Value".equls(Value))
    NameBean .setRendered(true);
    else
    NameBean .setRendered(false);
    Regards
    Meher Irk

  • Display only part of the STRING field, but search ALL field

    Hi all,
    I have a field VARCHAR2(4000) that holds a lot of text.
    When I make a report in APEX, it shows in each row, ALL text, so the report is very "ugly".
    I want to limit the display of that column for only the first 60 characters.
    I tried to use the SUBSTR function, that worked, but the search option will search for the text only in that 60 lenght characters, and will now search in the rest (not displayed) part of the field.
    Is there a way to do this full search and display only part of the field?
    Thanks

    You can have the 'substring' column displayed to the user, but have another column which shows the full text lets say it has an ALIAS of "*SEARCH_LARGE_TEXT*" in the report definition(and is among the displayed columns).
    You can hide the large text column(SEARCH_LARGE_TEXT) using JS as
    $('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
    Note: ^= syntax used to match data column even when break formatting used
    You can make sure that the column stays hidden even after an IR filter or refresh by binding it to the refresh event of the IR by
    $('#apexir_WORKSHEET_REGION').bind('apexafterrefresh', function(){ 
      $('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
    change the string "SEARCH_LARGE_TEXT" with your column's alias
    Hope it helps

  • Can we hide the field in Shopping Cart of SRM

    Hi..
    Can we hide the field in Shopping Cart of SRM??
    I have to hide some of the fields from SRM shopping cart screen. is it possible to hide the fields??
    Please suggest me
    Thanks.
    Regards,
    Manoj Tiwari

    Hy,
    For screen variants, just go to transaction SHD0.
    The only screen variants available in SRM 4.0 are:
    Item data overview in an invoice without purchase order reference: BBP_IV_NON_PO
    Item data overview in the invoice with purchase order reference: BBP_IV
    Item data overview in the confirmation: BBP_CF
    Item data overview in the confirmation for time recording: BBP_CF_TIMEREC
    Item data overview in the purchase order: BBP_PO;
    Item data overview for contracts: BBP_CTR_ITEMLIST
    Item data overview for selection of contracts: BBP_CTR_ITEM_SELLIST
    Search results for entering an invoice and/or confirmation: BBP_SEARCH_PO
    Search results for entering a purchase order: BBP_SEARCH_SC
    Search results for displaying/processing an invoice: BBP_CHANGE_IV
    Search results for displaying/processing a confirmation: BBP_CHANGE_CF
    Search results for entering/displaying/processing/status of a shopping cart: BBP_SC;
    Worklist for Sourcing: BBP_SOCO_WL
    Work area in Sourcing: BBP_SOCO_GA
    This is very light, and most of the SRM project have to make Templates, or ABAP screens repairs, to Hide/Show fields.
    Regards.
    Vadim

  • The # sign is part of db field names

    I'm using an odbc to a database where the # sign is part of
    the field name. I have researched it and found that suggested
    solutions don't work. Anyone know of a workaround for a field name
    ISREC#

    I get the following error;
    Error Executing Database Query.
    [Macromedia][SequeLink JDBC Driver][ODBC Socket][IBM][iSeries
    Access ODBC Driver][DB2 UDB]SQL0206 - Column "isrec#" not in
    specified tables.
    The error occurred in
    D:\usersites\taxsearch\htdocs\update2\submit.cfm: line 5
    3 : <cfparam name="lastname" type="string">
    4 : <cfparam name="recnum" type="numeric">
    5 : <cfquery name="GetIndiv" datasource="AS400"
    username="quser" password="quser" dbtype="odbc">
    6 : select "isrec##" as isrec,ISLNAM,isfnam,iscity from
    istatic
    7 : where ISrec = recnum
    SQL select "isrec#" as isrec,ISLNAM,isfnam,iscity from
    istatic where ISrec = recnum
    DATASOURCE AS400
    VENDORERRORCODE -206
    SQLSTATE 42S22

  • Hide the fields

    hi gurus
    how i hide the fields?

    Hi,
    To Hide the field in Material Master, follow the steps:
    1.Just click the tab ,(Which is u want to Hide)and get the field name ( pessing F1 and Tech TAB)
    2.Go to T.Code: OMSR and enter that field name and get Selection Group
    3.1. Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type){{ ( example :;For ROH material type  the Field reference is ROH)
    3.2. use T.code:OMS9,, Double Click your Field Reference and select field selection Group  & select round box of  Hide and save.
    Regards,
    Biju K

  • How to change the field size cache/buffer in a query

    I query a field from sql developer, the field is cases_history, it resides in a data mart in the global network of our company.
    this field is big in size, it stores logs in a sequential way, so field size increases a lot.
    when i query it and try a "single record view" the field is cut off and can´t see all of its content..
    WHAT I THOUGHT AND IT DOESN´T APPLY
    1. maybe in database connections in the system tab, I go to the oracle data mart that i am interested in and change buffer and cache
    but it doesn´t work, sql developer keeps showing part of the field
    2. maybe it was then the buffer size in sql developer, so I change it, but no luck
    WHAT IS THE PROBLEM HERE?
    MANY THANKS IN ADVANCE

    many thanks in advance for your help,
    1.the data type in the remote oracle data mart is VARCHAR2(4000)
    2.editing with the pencil cuts off at somepoint (which is the same line and last word)
    3.this is the query I write
    ||select case_history from wfm_case where case_id='xxxx'||
    this is to test if I can get a long case_history, which we know it is because it is fully accessible through a web solution to revise cases.
    PLS note. I have a tns connection which is of the following type :
    (in data sources (odbc) -- system dsn -- oracle odbc driver configuration ...oracle .. buffer size =9000 , cache buffer size =4000 and FORCE SQL_WCHAR SUPPORT is enabled
    many thanks,
    Jordi.

  • When I upload a single file into a production in FCS I can access all the fields in the metadata set, when I upload a batch of files, I can only access a partial number of fields in the metadata set.  Does anyone know why this happens?

    When I upload a single file into a production in FCS, I can access all the fields in a metadata set.  When I upload a batch of files into the same production in FCS, I can all access part of the fields in the metadata set.  Does anyone know why this happens?

    dredcomm,
    Great answer, and it led me to where to solve the problem.  In the field definition screen there is a category drop down list.  If you choose something other than none from the category drop down list then that field won't appear in the list of fields when you attempt to batch import a group of files.
    Thanks,
    Dave

  • Updating text inside the field

    Can I update the specific part of the field e.g. the column foo contains one entry: "Hello Wworld" and I want to update just Wworld leaving the rest of the data. I given very simple example but in my case the data contain 3900 chars
    Thanks & best regards

    My question still remained unasnwered
    Perhaps I am not able to explain in a good wasy. again I didn't want to update the specific record of the field but want to update specific part of the specific record e.g.
    id
    1214
    description(FieldName)
    Mr Volodymyr Novytskyi Minister of Industrial Policy of Ukraine estimated that Ukraine development of steel output by 3% to 4% in 2009.
    Mr Novytskyi stated that steel producing indexes in 2008 will be a little lesser than anticipated, about 43.7 million tonnes versus _46 million tonnes predicted_.
    He stated that “Such a situation occurred due to drastic price reduction for steel on the world markets, which lead to problems of the Ukrainian enterprises in sales of their products. The risks on the foreign markets that may be caused by expansion of the Chinese metal products were not taken in consideration. Thus, over the last months, China supplied metal to the same markets with Ukrainian enterprises.”
    There is a complication of providing the mining complex with raw materials necessary for steel producing in special coke.
    ==========================================
    e.g. I want to update record 1214 description field but a part of field "46 million tonnes predicted" to "46 billion tonnes predicted" and didn't want to change rest of the record
    Is there any solution for it like editing text file
    Thanks & best regards

  • Hide subtotal based on the values not the field.

    Hi,
    i am developing an ALV(FM) report to display the status of the Sale order (cleared and not cleared). my need in this is
    1. i need to show the subtotal of the cleared sales orders values only and hide the not cleared SO values.
    2. while sorting by status, i want to show the status for each rows rather than displaying on the whole.
    please provide me some hints for this.
    thanks in advance.

    Hi,
    Have you appended the fields to sort table like this:
    it_sort-fieldname = 'Item Field'.
    IT_SORT-TABNAME = 'GI_FINAL'.
    IT-SORT-SPOS = '2'.
    IT_SORT-SUBTOT = 'X'.
    IT-SORT-UP = 'X'.
    APPEND IT-SORT.
    it_sort-fieldname = "Header Field'.
    IT_SORT-TABNAME = 'GI_FINAL'.
    IT-SORT-SPOS = '1'.
    IT_SORT-SUBTOT = 'X'.
    IT-SORT-UP = 'X'.
    APPEND IT-SORT.
    HERE SPOS IS SORTING POSITION...
    LIKE IN YOUR ITAB..
    SORT ITAB BY Header-field and Item-field.
    THE PREFERENCE OF SORTING....
    Regards,
    Kumar.

  • Crystal report displays only a part of a field

    I created a Crystal report based on a BW Query. The user enter a comment about a sales order in SAP. This field has only a key but no text in BW.
    So the text is the key. The whole comment can be seen when I run the query with Bex Analyzer. The key is displayed on the report.
    However Crystal report cuts the length of this field although I use the key in the Crystal report as well. Only 143 characters can be seen.
    I adjusted the font or can grow option of the field but it doesn't work.
    I tried this formula as well but it did not work.
    Stringvar s1:={field} [1 to 100];
    Stringvar s2:={field} [102 to 200];
    S1&s2;
    Can somebody help me about this issue?
    I will be very thankful.
    Deniz

    That would be CR 2013, Service Pack 2. CR 2013 is now on SP 5 and it would be good to update to that. Links to updates are here:
    https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/patch_download/main_public.htm
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow me on Twitter

  • How to get the total amount and hide the field

    Hi Experts,
    In Crystal report parameter screen, user has the option to Mutliselect either Donor or Grant or Donor & Grant; based on that in report output user is expected to see list of Donors with Grand Total. Requirement is not to split Amount by Donor rather need to show list of all Donor in header and Grant Total in Footer.
    For example from the above list if user selected Algeria, Austria, Australia and India each country/Donor contribution  is 150 than expected output will be
    Algeria
    Austria
    Australia
    India
    America
    Grand Total = 600
    please let me know if any one get idea about this requirement.
    Best Regard,
    sowjanya.k

    Hi Sowjanya,
    If you're simply trying to place a grand total, use the 'Insert Summary' option.
    Choose the measure field as the 'Field to Summarize' > Choose 'Sum' as the summary operation > Under 'Summary Location' choose 'Grand Total Report Footer'.
    -Abhilash

Maybe you are looking for

  • External Hard Drive Won't Mount

    I've got a new 500GB Toshiba external hard drive, connected to my computer via a USB. The first time I connected it, it showed up just fine, but after ejecting it, and connecting it again, it doesn't show up in Finder. I've gone to Disk Utility, and

  • Can't Distribute Forms - Acrobat Standard 9.5.5

    We have recently upgraded our last XP user to a new computer with Windows 7 Pro SP1. She uses Acrobat to create forms for our customers to fill out. Using Acrobat 9 to distribute forms on XP for a few years no problem. On Win 7, when we go to distrib

  • Customisation to Account Maintenance transaction FP06

    Hi, I have a business requirement such that when I do a clearing through Account Maintenance(FP06), the tax items that are calculated on the items that are being cleared should not be wriiten to a specific tax G/L account. Normally clearing through a

  • Shell toast notification displaying only limited contents in push notification windows phone

    Hi, I have implement  push notification services for my Windows app .  I used shell toast to display the notification on my app.  The notification does come through but is cut-off -  displaying only limited contents, I need the whole set of contents

  • Issue while moving from string to field symbol -- waiting for help

    Hi Abap Experts, At present I got stucked here at client place. Please help me . Thanks in advance. I have a structure in field symbol. I also have data in the string (rec ty ) I need to move it to corresponding fields in the field symbol. While movi