Crystal needs user and password.

When I run my program in the same laptop that I have devoloped my application I dont have problems, but when I try run the application in another laptop I have problems with user and password.
In my application, into load event of my report I have read this sentence.
report.SetDatabaseLogon(UsuarioSQL, ClaveSQL, MaquinaSQL, BaseDatosSQL, True)
Any idea, please?
Thanks in advance.

"What version of Crystal Reports are you using? 10,5 Version
What are you developing yoru application in? Visual Studio 2012."
This is where your problem is. Version 10.5 of the Crystal assemblies does not work with VS 2010 and above. You need to do the following:
1. Uninstall your current version of the Crystal development tools.
2. Download the "Install Executable" of CR for VS SP 9 from here: http://scn.sap.com/docs/DOC-7824
3. Install CR for VS.
4. Change all of the references in your project to point to the version 13.9.x assemblies.
-Dell

Similar Messages

Problem in getting Portal Mapped user and password in Web Dynpro iView

I am developing a webdynpro iview.My app need to read mapped user and password form a system in Portal runtime.
I used the following codes in my Web Dynpro java program:
     IWDClientUser user = WDClientUser.getCurrentUser();
     IUser iuser = user.getSAPUser();
     IUserMappingService iums = (IUserMappingService)WDPortalUtils.getServiceReference(IUserMappingService.KEY );
//     IUserMappingService iums = (IUserMappingService)
//     PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
     IUserMappingData iumd = iums.getMappingData (systemalias, iuser);
     Map map = new HashMap ();
     iumd.enrich(map);
     String userid = (String)map.get( "user" );
     String pwd = (String)map.get ("mappedpassword");
I've add a sharing references in project properties,the value is "PORTAL:sap.com/com.sapportals.portal.prt.service.usermapping.IUserMappingService"
But when I run the iview on my Portal, it goes wrong, the message is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/HomePage'' for startup. Reason= Clusterwide exception: Failed to start dependent library ''com.sapportals.portal.prt.service.usermapping.IUserMappingService'' of application ''local/HomePage''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
    at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:184)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:117)
Anybody can help me?And are there anyother methods can get mapped user and password of Portal systems in Web Dynpro JAVA.

Hi Wayne,
      Did you added com.sap.security.api.jar to your webdynpro project. if not follow this steps.
1. Right-click the project in Eclipse or SAP NetWeaver Developer Studio.
2. Select Properties.
3. Choose Java build path -> Libraries -> Add Variable -> Select variable WD_RUNTIME -> Extend -> com.sap.security -> lib -> com.sap.security.api.jar.
I hope this should solve your problem.
Regards, Suresh KB

I can not login into the Folio Builder, I introduce my user and password and keeps logging in...

I've introduced my user and password, the Folio Builder tries to login but gets stuck logging in with the wheel spinning.
I've tried to uninstall and install Indesign CS6 again several times but nothing different happened...
Could you help me please?
Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
You can check if there are entries in the password manager with an empty user name.
Make sure that you haven't saved multiple (uppercase, lowercase) versions of that name and password.
Remove saved Password(s):
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
If you click "Never" then you create an exception that needs to be removed.

Cannot erase user and password in safary

Hallo, I need some support. In Safary setting i have user and password with empty webpage and I cannot erase this data. After erasing and reopen, data are still there. Thanks for support

You may want to enable Private Browsing. Tap "Private" to enable/disable Private Browsing. If the top of page is black, Private Browsing is enabled.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

WebService Publication asks for user and password

Hello,
I have a WebService with No Authentication.
The problem is that when I try to open the WSDL in the WebBrowser SAP asks for User and Password of the WebAS.
I have tried to Consume the WS through a 3rd application and when I try to consume it user and password is needed and the WS has no authentication.
I have read this topic:
Roles for SOAMANAGER
And the basis guy told me he has already done that configuration so If you know how to solve this problem I will be very grateful if you post it.
Thanx in advanced.

Hi,
SAP Web Application Server requires a username and password. This makes sense. Even if your web service is has No Authentication, you still have to access the server.
How to bypass this.....
Try reading the link given above.

Forget router user and password

Dear All,
I forget my CISCO1921-SEC/K9 and cisco 1941 routers user and password. So I want to reset my router. I have tried by following method, but did not success. Every time ask user name and password for User Access Verification. Pls. help me.
Method1:
I am tried to factory reset by press reset button. Did not work
Method2:
1) Connect via console to the device
2) Power on the device
3) Hit ctrl+break until you are in rommon mode
Type confreg 0x2142 at the rommon 1> prompt in order to boot from Flash.
This step bypasses the startup configuration where the passwords are stored.
Type reset at the rommon 2> prompt.
The router reboots, but ignores the saved configuration.
Type no after each setup question, or press Ctrl-C in order to skip the initial setup procedure.
Type enable at the Router> prompt.
You are in enable mode and should see the Router# prompt.
Thanks,
Qamrul

thank you for provide link.
i tried but failed. now i need to try by following method. but i don't know how can i remove flash from router and what is step?
If unable to break into ROMMON mode, perform these steps:
Remove flash.
Reload the router. Router will end up in ROMMON mode.
Insert flash.
Perform standard procedure for password recovery.
http://www.cisco.com/c/en/us/support/docs/routers/3800-series-integrated-services-routers/112058-c1900-pwd-rec-00.html

Downloaded music apps o.k. Says login failed when I put in user and password. No trouble when getting any other apps.

Downloaded music apps o.k. Says login failed when I put in user and password. No trouble when getting any other apps.

Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.

How to reset user and password on MacBook Pro without CD

I recently bought a MacBook Pro, 15" with Lion on Ebay.
There are times when I am asked for a password. I have asked the person who I bpught it from, but he does not remember.
I do not have the original disk, so I need a method to reset the user and password.
Thanks

Thank you for your input.
I received an e-mail from a computer tech that thought the following would work; please let me know what you think:
ResetLion password with Single User mode
Anyone running Mac OS X Lion cantake advantage of this method:
Shut down your Mac and turn it back on while holding     down the Command and S keys at the same time until your see     a black screen with white text. This is known as Single User mode.
You can skip this step, but it’s recommended that you     don’t because it will check the consistency of your hard drive. At the     prompt, type fsck -fy and press Enter.
Once the disk check is complete and the prompt returns,     type mount -uw / and press Enter.
Type launchctl load     /System/Library/LaunchDaemons/com.apple.opendirectoryd.plist and press     Enter.
Type ls /Users and press Enter. All of the     usernames on the computer will be listed, which is helpful if you don’t     know or remember what these are.
Type dscl . passwd /Users/username password     while replacing username with one of the users displayed in     the previous step and replacing password with the new password     of your choice. Press Enter. You will likely get an error message about a     file or directory not being found – it’s safe to ignore this.
Type reboot and press Enter.

I am trying to connect to tyne internet and computer requires my user and password in which i do not remember

i am trying to connect to tyne internet and computer requires my user and password in which i do not remember

I'm guessing that you are referring to Tyne Internet in the UK? Are you forgetting your Tyne username and passcode, or one for the computer? To recover the Tyne, you will need to contact them. If it is your Mac, from what little I understand about Mac computers, do you have it in your Keychain?

ACS database users and passwords.

Hi, i need to get all users and passwords from a acs 3.3 database unencrypted.
How can i do it?
Could you help me ?

To get a list of the USers in the ACS database use the CSUTIL tool on Windows platform.
go to bin directory under the ACS install folder and do
CSUtil.exe -u
this will generate a file "users.txt" in the same folder.
But I dont think you can get the password in unencrypted form.

Can't activate ipad which we forget the user and password

can't activate ipad which we forget the user and password
what i need to activat it please

Strange that you all (we) cannot remember user and password.
Got any reason why?

Do you standard users and password solman 4.0

dear friends,
system: solman 4.0
database: microsoft SQL server 2005
do you standard users and password solman 4.0.
i m not able to log to system ..
i also tried DDIC and SAP* from 000,800..
do you know any other user of solman .. and it's password..
please give me solution..
thanks
zaheer

Hi,
it is a newly installed system? or you forgotten the sap* passowrd
we can try sap* with the password "PASS".But for that you need to carefully delete it at the database level.
the statment somewhat look like
delete USR02 where UNAME = 'SAP*' and MANDT='000'
, since the table, USR02, which is the one that keeps the passwords.
After this, you will be able to log on as SAP* again with password PASS.
Thanks,
Jansi

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

External Web Service - User and password in HTTP header

Hi!
How is it possible to add user and password in the HTTP header in a external web service call?
I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio. I following the Java Development Guide - Web Service Security, and use the <i>secured service connection</i>. I have also created a new <i>System Landscape</i>, but should the new system be based on HTTP, my own PAR or what?
How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
Cheers
Asle

Hello All,
I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
Sorry for the long post. Hope someone can help. Thanks.

Crystal needs user and password.

Similar Messages

Maybe you are looking for