Crystal Report can't add Currency field when connect to SAP Infosets.

Hi,
I created a simple Crystal Report which connect SAP Infosets.
Everything is fine except I add a "Currency" field into report. Three errors returned.
Fail to retrieve data from database -> Database connector error :'Syntax error in program SAPLHRPADINA1' -> Database connector Error: 'RFC_CLOSED'
Do you have any idea?

Hi,
can you run a InfoSet query based on the InfoSet ?
Can you create a QuickView on top of the InfoSet ?
ingo

Similar Messages

  • Crystal Reports can't add stored procedure using Oracle Provider for OLE DB

    Hello,
    I am trying to bind an oracle stored procedure to a crystal report through Visual Studio 2008.
    This oracle stored procedure returns a ref cursor.
    I am using an oracle 11g database (11.2.0.2.0) .
    When I use the Oracle Provider For OLE DB driver to bind the store procedure with the report, I get the following error message:
    Description : ORA -06550 Line 1 Column 7
    PLS 00306 wrong number of types or arguments to the "Strored Procedure Name"
    But When I use the Microsoft OLE DB provider for oracle driver, I can bind the stored procedure to the report successfully .
    I cannot use the Microsoft OLE DB provider for oracle driver because it does not support the CLOB data type which I plan on having the stored procedure return once I can get everything working.
    I have tried setting PLSQLRSET = 1 IN "HKEY_LOCAL_MACHINE\SOFTWARE\KEY_OraDb11g_home1\OLEDB", but that does not seem to work either
    Any assistance would be greatly Appreciated
    My Stored procedure is very simple as the moment (I just need to get it working then I'll add more stuff). Here's what it looks like:
    CREATE OR REPLACE PACKAGE PROMO.PKG_REPORT as
    TYPE OUT_Type IS REF CURSOR;
    procedure Report_ThisReport (
    p_ThisIdField IN number,
    IO_CURSOR IN OUT OUT_Type
    end PKG_REPORT;
    CREATE OR REPLACE PACKAGE BODY PROMO.PKG_REPORT as
    procedure REPORT_ThisReport (
    p_ThisIdField IN number,
    IO_CURSOR IN OUT OUT_Type
    IS
    BEGIN
    OPEN IO_CURSOR FOR
    SELECT ThisField
    FROM ThisTable
    WHERE ThisIdField = p_ThisIdField ;
    END REPORT_ThisReport;
    end PKG_REPORT;
    Edited by: 894988 on Nov 3, 2011 2:45 PM
    Edited by: 894988 on Nov 3, 2011 2:46 PM
    Edited by: 894988 on Nov 3, 2011 2:47 PM

    It seems that some questions posted here on the XE forum are really questions about other Oracle technologies.
    Concretely, for you there is an Oracle Provider for OLE DB Forum that is active and a terrific resource for you to use.
    Oracle Provider for OLE DB
    Cheers!

  • How can i add multiple fields when multiple fields match?

    Ok, I am really new to JavaScript and need as much help as I can get.
    Ok, here's what I have: I have 10 drop boxes labeled HAZ1-HAZ10. In each drop box the user can choose 1.1 - 1.6. I also have 10 numeric fields labeled NEW1T - NEW10T. These numeric fields multiply the sum of two other fields. I also have a "from" and "to" text fields labeled FROM1 - FROM10 and TO1 - TO10. In these text fields the user can input a building number.
    I need to add the NEW fields if the HAZ fields = 1.1 into a "grandTotal 1.1" field and I also need it to tell me if it's going "to" or "from" a particularly building number.
    I also need to do the same for 1.2-1.6. Can any one help?

    When creating a new email, open the Photos app.
    Select the Album.
    Tap Select.
    Select the items desired.
    Tap the Sharing icon and select Mail.
    Create the email.
    When replying to an email, it is not possible.

  • Crystal Report That Uses Stored Procedure Errors when connecting to the DB

    We had developed reports a few years ago, including one that calls a Stored Procedure on an iSeries AS400 DB2 database.  We upgraded our environments to Crystal Reports 2008 and BO XI 3.1.  Now, the existing report that previously ran in the old environment is not running (note that the other SQL-based reports work without a problem, only this one which uses a store procedure is not working).  I downloaded the report into my local Crystal Reports designer and tried to run it from there and I got the following error message:
    ======
    Failed to retieve data from the database.
    Details: ADO Error Code: 0x
    Source Microsoft OLE DB Provider for ODBC Drivers
    Description: [IBM][iSeries Access ODBC Driver] Statement violates access rule:  Connection is set to read only.
    SQL State: 37000
    Native Error: [Database Vendor Code: 30186 ]
    ======
    {CALL "<database>"."<library>"."RELEASEDNOTINVOICE"({d '2010-03-01'})}
    This call will still work from on a SQL client running on a JDBC connection.  Is there some problem with the new verion of BO and Crystal Reports with using the iSeries ODBC driver?

    ...my issue was resolved by setting the ODBC.INI registry entry for AllowProcCalls from 0 to 1.

  • Crystal report : can't add table in the samples provided by SAP

    Hello,
    I tried to add tables in the generic samples provided  by SAP.  I used the database expert and just added a new table but when I save the report in SAP and want to run it it is blank.
    Is there another way to add a table ?
    BR

    Already tried all those tricks!
    My question is concerning the standard layouts provided by SAP (downloaded from marketplace). The idea behind those reports is that you can use them as Templates. 
    The tables are not hardcoded with the table.field name but with a specific syntax that allows you to use those templates in any type of document (ex : you can use the template of sales order for delivery and invoices). The problem is that if you add a new table the report doesn't work!
    Thank you for the response anyway.
    Best Regards,
    Arnaud

  • How can I add a field to a Repeating Frame in the body of a 9i Report

    How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
    I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
    I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
    Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
    Thanks,

    Hi,
    i also got same query can u pls tell me elaborately, if u can can u pls send some code.
    Thanks & Regards
    Jagadeeshwar.B

  • While generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)

    while generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)

    Wrong forum to post the question, try to post the question in crystal reports community.
    Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
    --SumanT

  • While generating a crystal report can we edit database files in field explorer ?

    Hi,
    while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
    Regards,
    Mahendra

    Wrong forum to post the question, try to post the question in crystal reports community.
    Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
    --SumanT

  • How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

    Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
    Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

    I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
    Thanks for any suggestion

  • Which version of crystal reports can link to Windev 14 and SQL server 2008 applications

    I am developing an application with windev 14 and sql server 2008, i would like to know which version of crystal report can i use?

    Hi GS,
    Move to .NET SDK forum.
    I don't know how CR for Visual Studio will integrate into WinDev but to get the installer for VS 2010/2012/2013 go to this page:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
    It's the runtime for CR 2011 or 2013 now.
    As for SQL 2008 you need to install the Client tools and when creating reports use the SQLNCLI10.dll as the client DB driver for ODBC or OLE DB.
    Don

  • I am trying to manage family sharing and I get a warning "invalid apple ID" that accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    I am trying to manage family sharing and I get a warning "invalid apple ID"  accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

  • The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

    The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

    Hold down shift as you right-click > Get Info to get the old style dialog box.
    tt2

  • How can we add additional fields to the BP Search RESULT screen?

    Dear Experts,
    How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
    Thanks!!!

    Hi Laxman,
                           I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
    Thanks
    Vishwas Sahu
    Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
    Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

  • How can i add Custom fields into the

    Dear Experts
    We have Ecc6.0 system,
    How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
    But in PM01 i am unable to find the enhance infotype tab.
    How can i do it ....pls help.....
    Regards
    Sajid

    Hi,
    Do it thru the third tab : Single Screen.
    There write down the infotype number (e.g. 0022) and say generate objects.
    Regards,
    Dilek

  • Can we add additional fields in work center creation using any user exit ?

    Hi,
    is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
    regards,
    madhu kiran

    hi,
    requirement is can i get the additional fields like equipment and asset in the work center creation ?
    i would like to maintain these against a work center
    and  using any user exit can i add additional fields ?
    regards,
    madhu kiran

Maybe you are looking for