Which version of crystal reports can link to Windev 14 and SQL server 2008 applications

I am developing an application with windev 14 and sql server 2008, i would like to know which version of crystal report can i use?

Hi GS,
Move to .NET SDK forum.
I don't know how CR for Visual Studio will integrate into WinDev but to get the installer for VS 2010/2012/2013 go to this page:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
It's the runtime for CR 2011 or 2013 now.
As for SQL 2008 you need to install the Client tools and when creating reports use the SQLNCLI10.dll as the client DB driver for ODBC or OLE DB.
Don

Similar Messages

Where can I find which versions of Crystal Reports are compatible with the Runtimes?

The Crystal Runtimes run reports authored in Crystal Reports. Where is it documented which version of Crystal Reports can be used to author reports for which version of the Runtimes?
If I use the latest Runtimes can I consume reports authored in any version of Crystal Reports, e.g. Crystal Reports version 10? Or Crystal Reports 2013?

Latest runtimes is rather vague(?), but yes the runtime for CR 2008 and "SAP Crystal Reports, Developer Version for Visual Studio .NET" will have no issues running reports create in previous versions of CR - all that way back to CR 9.x. After that, it gets more difficult the further back you go.
As for reports create in CR 2011 and / or CR 2013 no issue in "SAP Crystal Reports, Developer Version for Visual Studio .NET", guaranteed. Using those reports in CR 2008 should also not be an issue - e.g. I can't think of any features introduced in CR 2011 / 2013 that would not work in CR 2008.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Message was edited by: Ludek Uher

Which version of Crystal Report XI do I have?

Post Author: MarinoDp
CA Forum: .NET
Hello everybody.I know this may sounds odd, but I'm currently facing some problems (about PDF output) that should have been resolved with Crystal Reports R2 and I'm not sure which version I have. The fact is that all the 'old' developers left the company and currently no one exactly knows which version of Crystal Report we use.The embedded .msi we install is named "CrystalReports11_NET_EmbeddedInstall.msi" and all the dll versions are numbered "11.0.0.1424".So, is this R1 and I have to upgrade to R2 or my problems are due to something else? Thank you in advance, Marino Della Puppa

Post Author: Argan
CA Forum: .NET
11.0.xxx is R1, not R2.

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

Database link between oracle and sql server

dear all,
i m a newbie to oracle and i need your help to know how to create a database link between oracle and sql server.my oracle version 10.2.0.3 and platform is redhat linux 5.7.your help appreciated.
thanks in advance.

[oracle@localhost ~]$ rpm -qa | grep -i odbc
php-odbc-4.3.9-3.15
unixODBC-kde-2.2.11-1.RHEL4.1
MyODBC-2.50.39-21.RHEL4.1
postgresql-odbc-7.3-8.RHEL4.1
freeradius-unixODBC-1.0.1-3.RHEL4.3
qt-ODBC-3.3.3-9.3
unixODBC-devel-2.2.11-1.RHEL4.1
unixODBC-2.2.11-1.RHEL4.1
is this showing odbc installed in os?

Reporting with Report Builder 3.0 and SQL Server 2008 R2

Hi everyone
I'm trying really hard to find books about Report Builder 3.0 or SQL Server 2008 R2
I found the following books on the "learn" site, sadly they do not cover Report Builder 3.0 or SQL Server 2008 R2 since there all too old.
Microsoft® SQL Server® 2008 Analysis Services Step by Step
Microsoft® SQL Server® 2008 MDX Step by Step
Microsoft® SQL Server® 2008 Reporting Services Step by Step
What are good books (like the ones above) for the newest system?

Hello wishmasterIN,
Thank you to post your question on TechNet forum.
Based on my experience, the books are always delayed to the new technology, since the author need time to summarize and analyze the new features in the new product or technology, write it down and publish it. If you want to have a quick learning about the
new technology, MSDN library is a good place. It can be a cookbook for you. It contains some detail steps for tools, such as Report Builder or BIDS. It also contains many new features introduction. It is always very useful for you to understand the new features.
In addition, it is based on web and many links make you can jump to the other technical point freely. The most important is all of these is free and all the information will be updated if the new feature is released.
In short, if you want to learn the latest technology about Microsoft product, MSDN is a good choice. I hope my introduction is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support

Xcelsius and SQL Server 2008 Reporting Services

I am totally and utterly p1$$3d off and surely I cannot be the only person to be using a similar setup i.e. Xcelsius along with SQL Server 2008 Reporting Services.
I have installed and tried to get working the XRS gateway and get connectivity to Reporting Services so that SSRS reports can be utilized with Xcelsius... BUT NO...
when trying to configure and use the GetReports command from the xrs.asmx web file I get an error, namely:
<?xml version="1.0" encoding="utf-8" ?>
<ROOT>
<Message>Client found response content type of '', but expected 'text/xml'. The request failed with an empty response.</Message>
<StackTrace>at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.ReportingServices.ReportingService.ListChildren(String Item, Boolean Recursive) at Microsoft.ReportingServices.CatalogManager.CreateXmlNode(XmlDocument Doc, CatalogItem Item, XmlNode ParentNode) at Microsoft.ReportingServices.CatalogManager.SerializeToXML() at Infommersion.XRS.Service.GetReports()</StackTrace>
</ROOT>
Only to be told when I logged a support call, that "SQL Server 2008 Reporting Services is NOT SUPPORTED"
please go back to using 2005!!!
I find this totally and utterly unbelievable, it's not even as if its a new product... and surely i am not the only person using Xcelsius and wanting to utilise 2008Reporting Services Reports...
has anyone come across this error or understand what is not occuring to get this message and how to resolve?
yours eternally grateful if anyone can shed light on the matter
dean

Indeed, got the XRS gateway working but it isn't able to connect to RS2008.
I guess the cause is that for RS2005 the web service connection point is the file ReportService.asmx. In RS 2008 this file is renamed to ReportService2005.asmx and therefor the XRS gateway cannot connect to it.
A fix pack seems to be in the making:
[1400035 - Xcelsius 2008 with MS Reporting Services 2008 Supportability |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433303330333033333335%7D.do]

Xcelsius Reporting Services Gateway (XRS) and SQL Server 2008

Hello,
I saw on a post somewhere that SAP support had stated that XRS wasn't compatible with SQL server 2008.
Is that correct? I have hit an error.
<?xml version="1.0" encoding="utf-8" ?>
- <ROOT>
<Message>Client found response content type of '', but expected 'text/xml'. The request failed with an empty response.</Message>
<StackTrace>at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.ReportingServices.ReportingService.ListChildren(String Item, Boolean Recursive) at Microsoft.ReportingServices.CatalogManager.CreateXmlNode(XmlDocument Doc, CatalogItem Item, XmlNode ParentNode) at Microsoft.ReportingServices.CatalogManager.SerializeToXML() at Infommersion.XRS.Service.GetReports()</StackTrace>
</ROOT>
when trying to Invoke the GetReports method from a browser.
This is in response to a client of ours having a similar problem.
Ian
Flynet

Hi BlakeDuffey,
Generally, we may see the error messge "Default appdomain failed to initialize" in the application log when try to start Reporting Services if the RSreportserver.config file has been modified unexpectedly. At this time, I suggest that you back up your
current RSreportserver.config file, and then check the config file referring to the following article:
RSReportServer Configuration File
Note: The RSReportServer.config is located in the <drive>:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer folder.
If you cannot find the exceptions in the RSreportserver.config file, please post the config file so that we can help you to check it.
Meanwhile, please also check the Reporting Services Log file to see if there are any error messages related to the issue. If there are, please post the error messges as well. The Reporting Services Log file is located in the <drive>:\Program Files\Microsoft
SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles folder.
Hope this helps.
Regards,
Mike Yin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Mike Yin
TechNet Community Support

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

Can service broker work between SQL Server 2008 and 2012, ssbdiagnose returned an error !

Hello,
We have a setup of three applications that sends and receive messages using Service Broker.
One part is on a server, we'll call 'S' have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64)
The other part, we'll call 'E' use to have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64).
But I am migrating these apps to a new server, we'll call 'C' that has: Microsoft SQL Server 2012 (SP1) - 11.0.3339.0 (X64)
I have used this command line tool to test it :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/CService" -S "ServerC" -d EDatabase TO SERVICE "//S/S/ECService" -S ServerS -d SDatabase ON CONTRACT //E/S/ECContact
It returned:
An internal exception occurred: Cannot read property ServiceBrokerGuid.
This property is not available on SQL Server 7.0.
So, I am wondering, is it supposed to work between these two versions ?
As more info, in the previous setup, it was using certificates but I have changed the Endpoints to use only Windows Authentication.
Thanks for any advice.
Claude

Hello,
Many thanks to you and Fanny for looking at my question.
In fact I was unclear, please let me provide you with more details.
Maybe the use of "always on" plays a role here... I will use different names so it might be clearer...
ServerSoftware2008 server has SoftwareDB database.
ServerEmployees2008 server has EmployeesDB database.
Service broker use to work fine between those two above, with certificates.
The new server comes in, two virtual servers with SQL Server 2012 Enterprise Edition with Always On.
I call it ServerEmployeesC but this is the listener. Behind, there is ServerEmployees2012_A and ServerEmployees2012_B and of course, both have a EmployeesDB database.
So, to use SSBDiagnose, I wonder if I need to use quotes around values and if I can use the listener name with FQDN. Concerning the use of instance name in the syntax, there is only one instance per server, is it best practice to use it on the command
line ?
Here is again, my command :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/E" -S "ServerEmployeesC.sub.acme.com" -d EmployeesDB TO SERVICE "//S/S/E" -S "ServerSoftware2008.sub.acme.com" -d SoftwareDB ON CONTRACT //E/S/E
Again, many thanks for any help you will be able to provide, the people who configured this application at first are no longer here and I am trying to configure the new server in a task of migrating to SQL Server 2012 for one of the two servers involved
and I am having a lot of problems doing it.
Best regards,
Claude

Can I recover a damaged SQL Server 2008 database with the undamaged .mdb and .ldf files?

Their original SQL Server was 2008, with SP unknown, but installed on D: and C: drives. The power spike corrupted their O/S on the C:
drive and someone reinstalled both the O/S and the SQL Server, which is now SQL 2008, SP4. They have intact files for all system databases, both .mdb and .ldf. Is there some way they can reconnect with the user databases using the intact copies
of the previous system databases? I have heard that if the SQL Server is stopped, previous Master and Msdb .mdb and .ldf files moved into place and the server restarted, that any previous user database .mdb and .ldf files can be accessed by the SQL server.
Is this the case, or are there details missing?

Hello! try this steps
1 Open your SQL Server Management Studio console. This application shortcut is available in the SQL Server directory in the Windows Start button.
2 Enter the system administrator user name and password. SQL Server's administrator user name is "sa." This account is required for privileges to restore the database. If your restoring on a host provider server, use the administrator user name
and password they supplied for your account.
3 Right-click your database name and select "Attach." In the new window that opens, click the "Add" button to open a dialog box.
4 Select your MDF file and press the "Ok" button. It may take several minutes to restore the database if it is a large file. Once the process is finished, browse your tables to verify the data. The database is now restored.
If nothing helped try to use:
https://www.youtube.com/watch?v=1cbOYdvBW2c

Reports quit working after upgrade to SQL Server 2008

Folks,
I'm running Visual Studio 2008 (sp1) and recently upgraded to SQL Server 2008. Reports worked fine until after upgrade. Now I get the "Login Failed" error message.
Here is code snippets:
        CrystalDecisions.CrystalReports.Engine.ReportDocument oReport = new   CrystalDecisions.CrystalReports.Engine.ReportDocument();
        TableLogOnInfo LonOnInfo = new TableLogOnInfo();
        TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
        TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
        private Tables crTables;
        private Table crTable;
        ConnectionInfo crConnectionInfo = new ConnectionInfo();
            crConnectionInfo.IntegratedSecurity = true;
            crConnectionInfo.ServerName = Properties.Settings.Default.InstanceName + "
Instance";
            crConnectionInfo.DatabaseName = "DATABASE";
            crTables = oReport.Database.Tables;
            for (int i = 0; i < crTables.Count; i++)
                crTable = crTables<i>;
                crtableLogoninfo = crTable.LogOnInfo;
                crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                crTable.ApplyLogOnInfo(crtableLogoninfo);
            oReport.RecordSelectionFormula = xFormula;
            crystalReportViewer1.ReportSource = oReport;
Has anyone had this problem? Any help would be appreciated.
Terry

CR 2008 does not support MS SQL 2008 yet, meaning we have not had time to test it completely and add it to our supported platforms.txt file.
One thing I noticed is you are using trusted authenication:
crConnectionInfo.IntegratedSecurity = true;
Make sure you give access to all users, MS changed the security properties a lot since SQL 2005 and you can't simply log into any database now. If you have a DBA check with that person on how to configure NT Authentication or the Help file. You can also do a quick test and simply use MS SQL Server authentication to confirm if it's a user permission issue.
Try creating a report that doesn't use Integrated Security, check the box off on your data logon prompt in the Designer.

Which Laptop is good for VS 2012/2013 and SQL SERVER 2008 R2 /2012 ?

Hi,
I am planing to buy a laptop.
I am gonna be using mostly for Visual sStudio 2013 and Sql Server 2012 .
my budget is $1000.
confuse between DELL/ HP / LENOVO..!!!
please help.

This is only a personal taste of mine:
I prefer to work in Virtual Machines. In fact I did set up a VM just for my programming. This has the advantage that games and other stuff are not slowed down by SQL Server Services and similiar stuff.
This also allows me to quickly make a small virtual networks with multiple clients if I need to test some client/server stuff.
Plus I am also a bit of an adminstrator and prefer to test stuff in VM's before I try them in the real world.
I prefer using Virtual Box for Virtual Machines, so one thing of big importance was support for VT-X/AMD-V. Without them Virtual Box cannot run x64 guests even on a x64 host system.
Otherwise I wanted Windows 8 (so I could finally learn to live with it/learn programming for it's UI). And of big importance was an upgrade of gaming ability (my old one had difficulty/impossibility to run most current games).
So I bought a x64, Win8 Gaming Laptop with 8 GiB RAM (so I can run 3-6 Windows 7 hosts in paralell) and looked that the CPU supported Hardware Virtualsiation.
Otherwise pretty much every current laptop will work. x64 OS might be prefereable, as .NET has some limitations under x32/x86 OS (like the
2 GiB limit). Multicore (2 or more) is pretty much the state of the art (are there still any single core CPU's out there?).
It of course needs to be a Windows (7 or 8) to support VS. New Laptops should have UEFI (all that are sold with Windows 8 have).
If you do not need a lot of storage, using a SSD instead of a HDD will propably speed up startups (Windows, Programms) and compilation times a lot (those are disk-heavy operations) - but I only know that it should and heard of people who have them.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008

Hi ,
     I want to install SAP NetWeaver 7.02 (not SP6) in Windows Server 2008 R2 x64, but I don't know which version of Java I should install first, I have downloaded the following four types of Java:
j2eesdk-1_4_02_2005Q1
j2sdk-1_4_2_09_windows_i586
j2re-1_4_2_19-windows-i586-p
j2sdk-1_4_2_19-windows-i586-p
    But, I don't know which type I should choose to install first.
    Thanks for help!

Hi Cathal,
    Thanks for your help!
    But the document of SAP installation says:
If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
Do not use 1.6.x! The installation will start, but not finish.
JRE 1.4.latest or 1.5.0_22 (tested): it means I should install j2re-1_4_2_19-windows-i586-p, is it right?

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

Which version of crystal reports can link to Windev 14 and SQL server 2008 applications

Similar Messages

Maybe you are looking for