Crystal Report Viewing Problem in SAP b1 2007

Hi ,
I have Installed Crystal Report Add On for 2007 SAP B1 but while display report i have getting following error,
Any one can tell me what i have to do,please resolved my issue
could not load file or assembly 'CrystalDecisions.Windows.Forms,Version=12.0.20000.0,Culture=neutral,PublickeyToken=692fbea5521e1304' or one of its dependencies,the system cannot find the file specified
Thanks
Chaitesh

Julie.
This change has already occurred?
Thanks.

Similar Messages

Crystal Report Viewer Control on SAP Form?

We are using Crystal Report XI to create custom SAP reports. We have integrated this into our Add-On by adding the Report Viewer Control to a Windows form and setting it's report source at runtime. This works ok but is a bit cludgy looking and causes some focus and redraw problems with SAP. I have tried for weeks to figure out how to get the ActiveX control onto an SAP form but with no luck.
Here is my code sample:
SAPbouiCOM.Item oItemX;
SAPbouiCOM.ActiveX oActX;
CrystalDecisions.Windows.Forms.CrystalReportViewer oCRX;
oItemX = this.sboForm.Items.Add("U_CRCtl", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X);
oItemX.Left = 0;
oItemX.Top = 0;
oItemX.Height = this.sboForm.Height;
oItemX.Width = this.sboForm.Width;
oActX = (SAPbouiCOM.ActiveX) oItemX.Specific;
oActX.ClassID = "{5E093535-5A5D-4E72-ACCD-F10B6D065BC9}";
oCRX = (CrystalDecisions.Windows.Forms.CrystalReportViewer) oActX.Object;
oCRX.ReportSource = @"c:\Test\Test.rpt";
I am not sure why this will not work. I always get either 'Specified cast is not valid' or 'Invalid Class ID'. If anyone has done this successfully or has any suggestions that would be great! Thanks for your help!
David

Hi Ibai,
Thank you for your interest in CrystalWave. I tried sending this info to the email address you gave but got an undeliverable message.
The links are as follows:
(please use Internet Explorer while accessing the download link)
1. CrystalWave info: http://www.twbs.com/CrystalWave.html
2. CrystalWave download: http://www.twbs.com/cwrfiv2004.asp (You need to fill in your info and the download will start.)
Please do let me know if you are not able to access these links and I can setup a temporary link for you to download the program.
Thanks,
Gopal Viswanathan

Crystal report viewer problem

Hi,
We have CR 2008 SP2 license version and We are using visual studio 2010 and downloaded CR for visual studio 2010. After upgrading when we run the application, report displays successfully with new report viewer but when i try to open another report it displays in new window rather than in current window. This issue occurs in Internet Explorer only. When i run this apllication in firefox it works....!!!! In firefox, it does not open new window for each report.
So, can you tell me this issue is related to browser or report viewer and what should we do to solve this issue?
Thanx in advance for any help.

Hi,
I got the exact problem which was occurred. We do have 3 frames in an aspx page. From the link given in one frame (left frame), we are loading new form in another frame(main frame) by giving the "target=main" in link. Suppose in left frame i have given options to load different reports. Report is loaded in main frame after clicking on one of the link given in left frame. Report is displayed successfully in main frame but after that if i click on any of the links given in left frame, page will be loaded in new window. That is the exact issue occurred over here.
By searching the solution for this problem, I got to know the reason. It is specified in community forum that in frames concept, frame name is taken "filter" by default. So i have to chahge my main frame id and name to "filter". I did that and the isuue is resolved...!!!! But for this reason, i have to change frame name in the application. May i know why this was happened..??? In earlier version i did not face this problem then why in upgraded version ...???
Thanks,

Crystal Report Viewer ActivX Control into an SAP Form

Hi
I need to show an Crystal Report Viewer in a SAP form This code show an blanck from.
I know that only ATL activX are supported by SB1, but I dont have more information about the Crystal ActivX.
Dim oFormTST As SAPbouiCOM.Form
Dim oCreatP As SAPbouiCOM.FormCreationParams
oCreatP = oApp.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
oCreatP.UniqueID = "TEST"
oCreatP.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
oCreatP.FormType = "TESTFtype"
oFormTST = oApp.Forms.AddEx(oCreatP)
Dim oItemX As SAPbouiCOM.Item
Dim oActivX As SAPbouiCOM.ActiveX
oFormTST.Height = 400
oFormTST.Width = 400
oItemX = oFormTST.Items.Add("TEST01", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X)
oActivX = oItemX.Specific
oActivX.ClassID = "CrystalReports11.CrystalReportViewer.1"
Dim oRep As CrystalDecisions.Windows.Forms.CrystalReportViewer
oRep = oActivX.Object
oRep.ReportSource = "E:\DevLoc\App\bin\FICHETECH.rpt"
oItemX.Height = oFormTST.Height
oItemX.Width = oFormTST.Width
oFormTST.Visible = True
Some one as an idea ?
Thks

Vishal,
I would like to let you know of an SBO addon that we have created called CrystalWave. This addon integrates Crystal reports with B1. This might save you a some time trying to recreate the wheel. Please take a look at the following link:
http://www.twbs.com/CrystalWave.html
YOu can download a fully functional copy at http://www.twbs.com/selectcwversion.html
This will work only on the SBODEMO_US company.
Let me know if you have any questions.
Gopal Viswanathan

Crystal Report Viewer (SmartViewerActiveX/ActiveXViewer) barcode problem

I am using the crystal reports viewer to show my reports in my asp website.
In the reports, I have a barcode using the font source IDAutomationHC39M.ttf.
This code must be a certain size that I indicated in my report design.
The problem is that the viewer appears in the browser with the barcode expanded to full size, and not with the size that I indicated in report design.
If I print from the program Crystal Reports, it appears according to the size indicated.
It seems that this is a problem of the Viewer in the browser.
Someone can help me? this matter is very urgent.
Thank you.

Thread moved to the .NET - SAP Crystal Reports forum.
A few details missing:
1) Version of CR?
2) CR updates applied?
3) Version of .NET?
4) OS?
5) What browser and version?
6) is the issue present on dev / deployed computer / both?
Oh, BTW.; if this is urgent, consider creating a phone case here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Feb 3, 2012 10:26 AM

Crystal Reports Viewer - pdf, prompts, icons problem

Hi all,
I am a new in BO.
I have some answer about Crystal Reports Viewer (not about setup.exe but about CRV application that I uploaded on Tomcat)
1) The old version (11.5) works good, only Export to PDF functionality is wrong. There are in the pdf file wrong display of specific czech characters (charset)
2) A new version, Crystal Reports Viewer 2008, show the same pdf mistake. I have J2SE Runtime Environment 5.0 Update 4 and Apache Tomcat 5.5.9.
I upload application on Tomcat, configuration (web.xml, crconfig.xml and context.xml) is the same with version 11.5.
Crystal Reports Viewer 2008 displayed reports, but the problem with PDF is present. The second problem is the look of CRV. First one, the icons (for export, print...all icons) are not displayd. I can copy old jar files into java (in application folder C:\WebReports\WEB-INF\lib), but then CRV looks like old version.
And CRV 2008 doesn't display listbox in dynamic prompt on crystal report. What shall I set to displaying prompts in CRV 2008 (on CRV or on report in Crystal 2008)?
Have you some idea? What and how can I set and configure application and where?
Veronika

Hi,
To confirm, are you talking about "Crystal Reports Viewer 2008" http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/viewer/index.epx
I suggest sending in the report, in the viewer, select "Help" - "General Feedback" and then pick the option to attach the report. In a couple of months there will be a refresh version of this view which will have Czech language support so it would be good if we could test out your PDF issue.
As for showing parameters in the prompt panel in Crystal Reports Viewer 2008, since the viewer cannot refresh the data, make sure the parameter does not used in the record selection formula but only in the saved data selection formula.

How to set printersettings for the crystal report viewer in SAP BI dynamically

Hello
I have set the URL method for my crystal report and with parameter passing as shown below, it was displaying the crystal report viewer by connecting to the SAP BI 4.0 server with this method.
http://cr:port/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sDocName=CRLabelParam&sType=rpt&lsSnPrinted=0&lsSsTestProjectNr=1
This URL will be called from Web application by different users, i would like to set the printer settings differently for different users for this crystal report viewer how shall i need to set the printer options?
shall i need to set the printer settings programatically for each user. Please advise me how do i need to proceed.
Thanks & Regards,
Rajeswari.

There are no BI / CR APIs that would do this for you. The way I see it, you'll have to have your own print button and populate it with the correct printer information for each user as they request the report. Of course, alternatively, use the viewer printer button and get the users to choose the correct printer.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Problem in Crystal Report Viewer 2008

Dear all,
I found that the crystal report viewer 2008 (Windows XP) could not display report properly when the file extension is in upper case. (report.RPT). In order to view this report, I must launch the viewer and click file --> open --> select file name.
After rename the file name to report.rpt, I can the report by double click report file.
This problem does not exist in Crystal Report Viewer XI. Any people encounter this problem?
Michael LO

Windows 2000 is not supported in current versions of CR. Check the platforms PDF file.

Problem showing the crystal report viewer in form after added the component on it

Greetings
I have a problem running a program. I created a form which I added the component Crystal Report Viewer perfecty but during program execution when I call that form my VS 2012 Ultimate show the following error:
Translated:
Failed to create the form. See Exception.InnerException for details. Error: An exception occurred in the type initializer for 'CrystalDecisions.Shared.SharedUtils'.
Note: If I remove the component from the form. the applications runs fine when calling the form without the component CrystalReportViewer
It is something related to my VS? o just that the actual version 13.0.9 is not yet compatible?

Report.Show?
How about you try:
CrystalReportViewer1.ReportSource = <path to your report>
Or:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
crReportDocument.Load(<path to your report>)
CrystalReportViewer1.ReportSource = crReportDocument
Or, if the report is added to the project:
crReportDocument = New test
CrystalReportViewer1.ReportSource = crReportDocument
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Message was edited by: Ludek Uher

Problem with vertical text in crystal report viewer

Hi,
I am displaying vertical text in crystal report designer and deploying the report in crystal reports server 2008. The deployed report is being displayed using JAVA in crystal report viewer control.
Problem: Vertical text header is getting collapsed wth other vertical headers.
Please help on this.
Thanks,

Hi Vijay,
I found out another method of retaining all the chart formatting that is done in the preview pane.
Once you have done all the changes then you will find interestingly there is a chart menu option that appears in the tool bar. Once you click on it there is an option "Apply Changes to All Charts".
Select that option, close your preview. Open it once again and you will find that all the settings are still there and the Web Viewer is able to display them properly.
I think that I resolved this.
Regards,
Gourav

Crystal Report Viewer and border problems

Post Author: catalinandrei00
CA Forum: Deployment
Hello there, I've created an report and I've added borders for the fields in the report (Right click on the field > Format Object -> Border -> Choose for the 4 margins the line-style single). The report is correctly exported to different formats (.doc, .pdf, .xls). My problem is that when I display the report in an ASP.NET 2.0 page using an Crystal Report Viewer the report is correctly shown but the borders don't appear.My question is why the borders don't appear in the Crystal Report Viewer? Thanks for helping for solving this issue. It's very important.Catalin

Hello catalinandrei00
I have the exact opposite problem as yours.
I am using integrated crystal reports with Visual Studio 2005 and I have put a Crystal Viewer on a web page.
First I also had the same problem like yours and then in one of the post i found a solution for this. Hope it will work for you too. here it is :-
Just remove the following line from your aspx page.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
Now regarding my problem. My problems is that now i can view the borders and everything correctly in the viewer but when i try to print the report it automatically exports to Adobe first and BAM!!! the format disappears. Though if i export to word Doc format it export perfectly fine with all the borders and everything
I hope some other reader will come to my rescue...pls HELP.

Problem with Crystal Report Viewer and Dual Monitors

Post Author: jtgoff
CA Forum: .NET
Hey Guys,
I'm running into another problem with the Crystal Report Viewer. Here's a little info before I get started, I'm developing a Windows App using WinForms in VS2005 and Crystal 11 Release 2. I'm referencing all the latest Crystal dlls from Service Pack 2 of Crystal 11 Release 2. The problem occurs when I drag my Windows Form that contains a Crystal Report Viewer onto my second monitor and try to scroll or resize it, when I try this the Report Document within the Viewer becomes glitchy, blocky, and un-readable. I drag it back onto my main monitor and perform the same actions and the Report appears perfectly fine. I notice this occurs after a number of Report Previews through my App. Initially when I start my App, I can drag the reports onto my second monitor and resize it and scroll through it no problem. However, after a number of Previews, I notice the problem occurs on my second monitor. This is a very strange bug that doesn't produce an error and appears to happen randomly. I was wondering if anyone has come across this problem, if so... Is there a solution for this?
Thanks in advance!

You can update the parameters using Crystal Viewer 2008. I had the same problem with the "CHANGE" button being grayed out.
Go to your Report -> Select Expert -> and now you have three choices: Record, Group, Saved Data. Put your select statement using your parameters in the Saved Data only (remove it from Record if already there).
It works awesome and even works on dynamic parameters!

Problem in crystal report viewer control's toolbar "export"button using SSL

Hi,
I would like to ask. My project is using BO XI Release 2 and VS-Studio 2005. Initially my project doesn't use SSL... At that time when i view the report with crystal report viewer control and can export (using built-in toolbar "export button"). Now project is using SSL and canu2019t export the error is
u201CInternet Explorer cannot download file from server.
Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.u201D
Actually this error can solve "Cache-control" change to "no-cache". But I donu2019t know in crystal reportu2026
Anyone can help ???
Thanks

In Internet Explorer, go to Tools -> Internet Options -> Advanced and ensure "Do not save encrypted pages to disk" is unchecked.
Default is to have that option checked.
It was considered a IE security issue that IE saves all content to temp disk location unencrypted, even those pages served by HTTPS (for example, let's say you use HTTPS to download your bank info, and it's stored to temp disk for someone else to retrieve later). So more recent versions of IE implemented that option setting.
How that option setting works is strange - it downloads the file, saves to disk, then deletes the copy from the disk immediately, before passing it to the application responsible for the MIME type. So the application tries to open a directory path to a non-existing file.
Issue is specific to IE, and it's not something you can control via the SDK.
Sincerely,
Ted Ueda

Error in Preview and Print in Crystal Report Viewer 2.0.0.7 in Workstation

Hi Guys,
I am encountering a problem when clicking preview and print in Crystal Report Viewer 2.0.0.7. It returns an error
Unhandled exception has occurred in your application. If you click Continue the application will ignore and attempt to continue. If you click quit, the application will close immediately. Load report failed.
I already install the runtime crruntime_120_mlb, . net framework 3.5 sp1 and the add-on itself. The viewer is working properly in SAP Server. My version of SAP is SBO 2007 A SP00 PL10.
Regards,
Michael

here's the detailed error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
CrystalDecisions.Shared.CrystalReportsException Load report failed. --- System.Runtime.InteropServices.COMException (0x80004005) The device is not ready.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
   at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
   at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3620 (GDR.050727-3600)
    CodeBase fileCWINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll
SAP_CR
    Assembly Version 2.0.0.7
    Win32 Version 2.0.0.7
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRSAP_CR.exe
Interop.SAPbouiCOM
    Assembly Version 8.0.0.0
    Win32 Version 8.0.0.0
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.SAPbouiCOM.DLL
System.Windows.Forms
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll
System
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3614 (GDR.050727-3600)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll
System.Drawing
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll
CustomMarshalers
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32CustomMarshalers2.0.0.0__b03f5f7f11d50a3aCustomMarshalers.dll
Interop.CR_Crypto
    Assembly Version 6.0.0.0
    Win32 Version 6.0.0.0
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.CR_Crypto.DLL
System.Data
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll
System.Configuration
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll
System.Xml
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3082 (QFE.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll
System.Transactions
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll
System.EnterpriseServices
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll
CrystalDecisions.Windows.Forms
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Windows.Forms12.0.2000.0__692fbea5521e1304CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Shared12.0.2000.0__692fbea5521e1304CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportSource12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportSource.dll
CrystalDecisions.CrystalReports.Engine
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.CrystalReports.Engine12.0.2000.0__692fbea5521e1304CrystalDecisions.CrystalReports.Engine.dll
System.Web
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3618 (GDR.050727-3600)
    CodeBase fileCWINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll
CrystalDecisions.ReportAppServer.CommLayer
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CommLayer12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ClientDoc12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.DataSetConversion
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportAppServer.DataSetConversion12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.DataDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.Controllers12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CubeDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ReportDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.0.840
    CodeBase fileCWINDOWSassemblyGACBusinessObjects.Licensing.KeycodeDecoder12.0.1100.0__692fbea5521e1304BusinessObjects.Licensing.KeycodeDecoder.dll
JIT Debugging
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example
configuration
    system.windows.forms jitDebugging=true
configuration
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Crystal Report Viewing Problem in SAP b1 2007

Similar Messages

Maybe you are looking for