CRYSTAL Reports 2010 for VS 2010 Installation and Deployment issues

On Installing Crystal Reports for Visual Studio 2010 the Crystal Report Viewer in the Toolbox reports itself as Version 13.0.2000.0. When dragging said viewer onto an ASPX Page it: -
1) Comes up with the wrong version: - Assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304", NOT 13.0.2000.0!
2) The ADE visualisation of the ASPX Page comes up with the following error: - "Error Creating Control - ContentPlaceHolder1. SessionState can only be used when enableSessionState is set to true. ...............
In my Web.Config file enableSessionState is set to true AND System.Web,SessionStateModule is referenced in <httpModules> the message is therefore less than helpful.
3) Surprisingly when I correct the Version to 13.0.2000.0, the same error happens. Even more surprisingly the page builds and in the development environment the CrystalReportViewer works@#@!! Unfortunately when deployed to a production Web Serrver W2K8 x64 and IIS7.x the page loads but the viewer does not, no errors are caught, the event viewer log is happy. (The click-once Runtimes x32 and x64 have been installed on the server).
The same code works fine in VS2008 targetting CR 2008.
How do I:
1) Get CR2010 for VS2101 Installed Correctly?
2) Deploy The Viewer to a production server?

This is a known issue (unfortunately, no KB created yet as I just duplicated and reported the issue to QA (tracking number; ADAPT01506220) two days ago).
The issue appears only on computers with side by side install of .NET 2008 and .NET 2010.
Follow these steps to resolve the issue:
1) Remove the following from the web.config:
<add assembly="CrystalDecisions.Shared, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
2) Open the form that has the viewer on it, go to code behind and replace this:
<%@ Register assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web"; tagprefix="CR" %>
with:
<%@ Register assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web"; tagprefix="CR" %>
3) Go to the Properties of the project, select references and remove crystaldecisions.web of version 10.5.3700
4) In the Properties, click the Add button and then the .NET tab and select crystaldecisions.web version 13.0.2000.0
5) Recompile.
Distribute the CRVS2010 runtime.
MSM:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
32 bit MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
64 bit MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
BTW. the same issue exists with WIN apps. The fix here is much easier; Remove all CR 10.5.3700 references from the project and add references to 13.0.2000 assemblies. (tracking number; ADAPT01506310).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

Crystal Reports 9.2.0.448 Formatting and exporting issues on CSV file

Hello,
when starting export to csv, excel or text - out of the crystal reports preview - content gets lost, i.e. crystal cuts parts of the csv text.
If I try exporting to word or pdf the whole content is being exported.
Can anybody tell me how to fix that problem?
Is this a known issue? Does there probably already exist a hotfix? I couldn't find any.
Would be great, if someone helped me!
Monika

Hi Monika,
No more fixes done to CR 9 since it's so old. Go to this link and download any patches you can find for CR 9:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
If that doesn't work try increasing the field width or using the Can Grow option. If that doesn't work then try downloading a trial version of CR XI R2 or Cr 2008 and test again. I suggest you try this on a PC other than your main PC just in case. We support side by side installs but you never know what it may do depending on what else you have installed.
Thank you
Don

Switch from OINV to ODRF in Crystal Report layout for print the Invoice?

Hi,
I have imported in Sap Business One some standard report developed by Sap with Crystal Report (like Sales Invoice).
I have try to print my Invoices and all is OK, then I have try to print a Draft Invoice and, even in this case, is all ok. Then I have open the Crystal Report designer for this print module, and the entry point is the OINV table. How can he print succesful the Draft Invoice (that is in the ODRF table ObjType = 13)? Formula Field? I don't understand!!
Thank for the help!!
Marco

Hi Marco,
You only need a single Crystal report for this. Base it on a stored procedure which has two INT type parameters @DocKey and @ObjectId. Within your SQL create IF blocks to handle different @ObjectId values:
IF @ObjectId = 13 then use the invoices tables OINV/INV1 etc.
IF @ObjectId = 112 then use the draft tables ODRF/DRF1 etc.
Don't forget to put the @ symbol at the end of the parameter in the report itself. That is all that is needed to create a single report that works for both added invoices and draft invoices. You could extend the SQL to handle other @ObjectId values like 14 for AR Credit Notes and so on.
Regards,
Andrew.

Crystal Reports, version for Visual Studio 2010 Problem

Dear all,
I encounter a problem after installed the crystal report version for Visual Studio 2010. Once I call
                       ReportDocument.PrintToPrinter(1,False, 0, 0)
The error message prompt:
Report is unavailable(Index was out of range. Must be non-negative and less than the size of the collection. Parameter name:index)
If I try
                         ReportDocument.PrintToPrinter(1,False, 1, 1)
It can print the 1st page of the report.
I also try to create a simple report. It works.
After installed this version, my reports also encounter the same problem in Visual Studio 2008.
My report has sub-reports. My PC is Windows XP.
Anybody has idea on this issue!?

Now you can set the various printer options using the PrintOutputController. I'm using a UI box to select the printer but your developer should be able to figure this out. If not you can include him in the e-mail, it would be fine to go direct. Of course you will stay in the thread:
     private void btnSetPrinter_Click(object sender, System.EventArgs e)
          System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
          // Use the next line if you need to, you'll ahve to test. Depends on how the reports were saved.
            //CrystalDecisions.CrystalReports.Engine.PrintOptions.DissociatePageSizeAndPrinterPaperSize = true;
            //CrystalDecisions.ReportAppServer.ReportDefModel.ISCRPrintOptions.DissociatePageSizeAndPrinterPaperSize = true;
            //pDoc.DefaultPageSettings = pgSettings;
            PrintDialog dlg = new PrintDialog();
            dlg.Document = pDoc;
            if (dlg.ShowDialog() == DialogResult.Cancel)
                MessageBox.Show("Cancel Button clicked", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            else
                CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions MYPRTOpts = new PrintOptionsClass();
                if (rdoCurrent.Checked)
                    pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               // the next 3 lines may not be necessary.
                    MYPRTOpts.PrinterName = cboCurrentPrinters.Text;
                    MYPRTOpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                    MYPRTOpts.PaperSource = (CrPaperSourceEnum)
                        pDoc.PrinterSettings.PaperSources[cboCurrentPaperTrays.SelectedIndex].Kind;
                    MYPRTOpts.PaperOrientation = CrPaperOrientationEnum.crPaperOrientationLandscape;
                    //MYPRTOpts.PageMargins.Bottom = .1;
                    //MYPRTOpts.PageMargins.Top = .1;
                    //MYPRTOpts.PageMargins.Left = .1;
                    //MYPRTOpts.PageMargins.Right = .1;
                else
                    pDoc.PrinterSettings.PrinterName = cboDefaultPrinters.Text;
                    MYPRTOpts.PrinterName = cboDefaultPrinters.Text;
                    MYPRTOpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboDefaultPaperSizes.SelectedIndex].Kind;
                    MYPRTOpts.PaperSource = (CrPaperSourceEnum)
                        pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
                rptClientDoc.PrintOutputController.ModifyPrintOptions(MYPRTOpts);
                //MessageBox.Show("Printer set.", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
                rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
                //MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thank you
Don

How do I resolve error 1310 while installing crystal report version for visual studio 2010.

How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need help
urgently to work with this program in my system successfully. Please help.

Hello Dorohidea,
Do you mean that when you install crystal report in virtual studio 2010, you receive the error message about error 1310?
Please take a look at the following KB.
Support for Crystal Reports for Visual Studio
https://support.microsoft.com/kb/317789/en-us
In Visual Studio 2010, to create a Crystal Reports project or Web site or to import existing projects or Web sites that were created by using older versions of Visual Studio or Crystal Reports, you must first install a version of Crystal Reports that is
compatible with Visual Studio 2010.
For more information about how to use Crystal Reports in Visual Studio 2010, visit the following SAP Crystal Reports website:
http://www.sap.com/crystalreports/vs2010
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

Crystal Reports asking for Dbase username and id

When I try to select a dBase file as my data source location in Crystal Reports, CR wants a user name and log in id for the dBase file...I do not have a user name or log in id for my dBase file...
How can I get past this?
Mitch

I don't believe this is a DB2 z/OS question, perhaps it would be better to ask in another SDN forum?

Crystal Reports 2008 failed to retrive data, and instead deleted it.

I have been using crystal reports 2008 for the past year or so with our billing software through an OBDC data source. I was using xp pro sp3. However I recently upgraded to a new computer running xp pro sp3 as well, and now I am having some serious issues.
When I try to connect to a data source in the database expert, it shows all the tables, and then the field explorer shows the fields, but when I actually try to brows the data, view a preview, verify the database, or refresh an old report it gives me an error and DELETES the .dat file that the field was located in. I am so glad I have regular backups to restore too, because pulling a report nuked 5 .dat files.
The errors I am getting are as follows:
"Failed to retrieve data from database."
Clicked ok
"Failed to retrieve data from database."
Clicked ok
"Database Connector Error: 'HY000:[Pervasive][ODBC Client Interface][LNA][Pervasive][ODBC Engine Interface][Data Record Manager]The file cannot be created with Variable-trail Allocation Tables (VATs)(Btrieve Error 105)'"
Clicked ok
"Failed to retrieve data from database.
Details:HY000:[Pervasive][ODBC Client Interface][LNA][Pervasive][ODBC Engine Interface]Unable to open table: <nameoftable>"
Click ok
and Crystal stays open but has just deleted the .dat file that the table was located in. It will still show the fields but no data. Trying to open the other software leads to an error "missing <name of table>.dat" It then has to be restored from a backup.
I have tried updating crystal as well as fully uninstalling it and reinstalling it, we have created a new ODBC connection, and cloned the database for testing purposes. The same thing occurs with the new database and ODBC data source.
We have no other computers, except my old one that has crystal reports on it. I have tried the old computer again and it is working fine.
Does anyone have an suggestions? This is pretty critical. Thanks in advance.
Edited by: Russellk on Jan 13, 2010 8:27 PM

Hello, you could try turning on ODBC tracing to see if it logs anything. It's a pain to get going but here's how.
Go to ODBC Admin, Click on the Tracing tab and create a log file and save. Don't start tracing yet. Close the ODBC admin and then re-open it and then turn tracing on. You may have to do this a few times to get it working.
Once it's tracing then open CR and try the demo data. Then close the report, log off, log onto the real data and do the same with a new report. You'll see a bunch of ODBC API's but there may be one or 2 that don't look right or errors may be logged compared to the DEMODATA.
Another suggestion is it may not be your PC doing the deleting. Maybe the Server thinks you have infected the data files and it's deleting them. Have a look in anti-virus quarantine logs on the server to see if it's doing the nasty....
Check the trust between your PC and the server.
I've also seen this type of odd behaviour with corrupted Profiles. Check with your IT guys on creating a new one for you, it's apain because you loose everything on your work station.
What happens if you log on from another PC using your account? Does that also delete the files? Or get someone else who it does work for log into your PC, does that work? If so it may be your Profile is either not trusted or it's been corrupted.
Good luck
Don

Keycode missing in Crystal Reports Basic for Visual Studio 2008

I just upgraded from Visual Studio 2005 Professional to Visual Studio 2008 Professional (with SP1 installed also). Crystal Reports Basic for Visual Studio 2008 is listed as installed under the VS Help dialog, but no key code is shown. And when I attempt to open a Crystal Report, I get a dialog saying 'Please wait while Windows configures Crystal Reports Basic', which eventually terminates with an 'Invalid Keycode' message.
I've tried repairing the Visual Studio install, and even uninstalling and reinstalling the whole thing. To no avail.
Other facts: My VS 2005 version still works with its version of Crystal Reports. I am running Vista Professional. Looking in the registry, under HKEY_LOCAL_MACHINE | SOFTWARE | Crystal Decisions | Crystal Reports | VSNET | Keycodes | CR9 NET, I see a Type REG_SZ with a data value in the form xxxxxx-xxxxxxx-xxxxxxxxxxxxxxxxxxxxxxxxxx [6 chars-7 chars-26 chars].
Help! How do I get Crystal Reports Basic for Visual Studio 2008 to work?

Hi Elaine,
Thanks for your response. I do have versions of Visual Studio 2003 and Visual Studio 2005 on my machine, and the earlier versions of Crystal Reports worked with these versions. In addition to the registry key I cited earlier (which I now understand is a VS 2003 version), there is an entry under HKEY_LOCAL_MACHINE | SOFTWARE | Crystal Decisions | Crystal Reports | 10.2 | Crystal Reports | KeyCodes | CR Ent. I see that you are correct, and this corresponds to my VS 2005 installation (which still works). However, there is NO entry under HKEY_LOCAL_MACHINE | SOFTWARE | Crystal Decisions | Crystal Reports | 10.5 (the CR Basic for Visual Studio 2008 path you indicated). There is an entry under HKEY_LOCAL_MACHINE | SOFTWARE | Business Objects | 10.5 | Crystal Reports, but it has only keys for ChartSupportPath, CommonFiles, DisablecheckForUpdates, and Path.
The Windows\assembly folder has 25 files that are CrystalDecisions.xxx, version 10.5.3700.0. This is consistent with my seeing 'Crystal Reports' listed as installed in VS 2008 Help. But no KeyCode!
I tried a complete uninstall and reinstall of VS 2008, without luck. I can't clean my system of earlier verions of Crystal Reports, because I am still supporting a body of work that I did under VS 2005, and I can't convert all this stuff to 2008 -- at least until I have a fully working VS 2008 suite. After this experience, I fear that if I were to uninstall an earlier version, i might never get it back!
I've spend quite a few hours on this with no luck, so any help would be enormously appreciated.

How generate a crystal reports layout for Batch Report

Dear Experts,
I want to create a crystal reports layout for Batch Report that appears when printing Delivery Note.
I've tried using DocKey@ token but it only works in the delivery note layout itself. The following code at the select expert for this crystal layout doesn't work:
{ODLN.DocEntry} = {?DocKey@}
Kindly guide me in the above issue. Thanks.

I am using version 8.8 SP.00 PL.10
It is very strange that I cannot get the layout connected to the database as I have followed the same steps for all layouts. It all works fine until I get to the invoice stage and then I cannot make the connection.
(I dont need to worry about the sales invoice as this was provided at installation point by our vendor)

Installing crystal reports 9 for the first time

Hi,
I am trying to install Crystal Reports 9 for the first time. We just received a package with 4 envelopes including Crystal Reports 9 Advanced, Standard, Professional, and Developer. Each envelope also includes Crystal Enterprise Report Appliation Server which I don't think I need (or I'm not sure). I have read a little bit on how I can go online to the SAP Service Marketplace and request license keys. I have not requested a permanent license key yet. I believe that I can install Crystal with a temporary key and then input the permanent key later. What I have done is insert the installation CD for Crystal Reports 9 Developer and then input the product key code found on the back of the Crystal Enterprise Report Application Server CD cover that was packaged with the Crystal Reports 9 Developer CD. However I get a message saying that the product key code is not valid or has expired. There is no product key code on the cover for the Crystal Reports 9 Developer CD but there is one on the Crystal Enterprise Report Application Server CD cover so that is why I input it.
Why is this key code expired? Please note that I am installing on a test PC before I install on the PC of the user who will be using Crystal for work purposes. Therefore I wanted to just install with a temporary key if there is such a thing at this time.
thanks
JW

Hi Josh,
I would like to add few things with above suggestion
For a new key code :
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key .
If your existing Key code does not work :
You need create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ .
Hope this helps,
Regards,
Shweta

Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

Hi Experts,
do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
For example
Sales Register
Purchase Register
Journal Register
Sales Analysis - Crystal Report
Purchase Analysis - Crystal Report
Check Register - Crystal Report
Production register
Pending Sales Order
Outstanding Receivable
Outstanding Payable
BankBook
CashBook
General Ledger
BP Ledger (Customer / Supplier)
Trial Balance
Balance Sheet
Profit & Loss Statment
Cash Flow statment
Excise reports
   RG 23 A Part I
   RG 23 A Part II
   RG 23 C Part I
   RG 23 C Part II
   Daily Stock Account
   RG 1
   ER 1
   etc....
Documets Layout
   Incoming Payment
   Outgoing Payment
   Journal Entry
   Transaction Journal Report - Crystal Report
   Sales Quotation
   Sales Order
   Sales Delivery
   Sales Return
   Sales Invoice (A/R Invoice)
   Purchase Order
   Goods Receipt PO
   Purchase Goods Return
   Purchase Invoice (A/P Invoice)
Inventory Transfer
Inventory - Goods Receipt
Inventory - Goods Issue
Best Regards,
Samir Gandhi

Hi Neetu,
Do you wish that at all customer site all concern involved in implemtation do the same work ?
I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
Best Regards,
Samir Gandhi

An error in Crystal Reports Basic for Visual Studio 2008

Greetings from Peru,
We have a problem with one of the Crystal Reports products weu2019d like you to help us with. We work with Crystal Reports Basic for Visual Studio 2008.
The error weu2019ve detected is in one of our systemu2019s reports; this report shows data inside frames. When the content to show is larger (in height) than the space left in the page, the container object of the report makes a line break keeping the title and the frame empty at the end of that page, but the information is shown in the next page. What we need is that not empty frame is displayed.
Weu2019ve tried to solve this problem by adjusting the report in different ways (by programming coding), but unfortunately this problem is related to how much data is displayed, because if this data fit in the space left in the page, the line break would not occurs and the data is shown at the end of the same page.
We hope you can help us with this issue. I look forward to your comments.

All I can think of is trying CR 2008 (v.12.x). You can obtain an eval copy from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Dynamic command execution fails in Crystal report viewer for parameters

We are using the Crystal Report Viewer for the .Net Application on the client side.The reports are designed using Crystal Report XI R2.
The issues that we are currently encountering is that, we are unable to load the combo-boxes in the pop-up for the parameters.
All the reports have multiple commands and the variables are of 'dynamic' type.
When the dialog box for requesting the pop-up comes up, It comes up empty even though they are linked to the respective commands.
Also,For reports having multiple parameters we are unable to give a single dialog box to get in all the parameters.It appears as a series of prompts.
Both,these issues are not encountered when the reports are launched via the Crystal reports developer tool.

Hello Varun,
I recommend to post this questionin the [dedicated NET forum|SAP Crystal Reports, version for Visual Studio;.
This forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Falk

Installing Crystal Report AddOn for 8.8

Dear All,
Please let me know how to install Crystal Report AddOn for 8.8 B one ? After installing the Addon When I am starting the Add On I am getting as error as External Connection to the database failed. SAP Crystal AddOn may not function properly. Please rerun the account setup with superuser login.
And when I click on Administration>>Crystal Reports Administration>> Account Setup screen to setup the account, I am getting error as Item- Could not commit action because the item is currently in focus [66000-23].
Regards,
Noor

Dear Noor,
You may check this thread:
Crystal reports for Business One 8.8
Thanks,
Gordon

CRYSTAL Reports 2010 for VS 2010 Installation and Deployment issues

Similar Messages

Maybe you are looking for