CrystalEnterprise.DiskUnmanaged: Logon failure

I am trying to schedule a webi report and i want the output in excel format in a windows folder, but I get this error:
CrystalEnterprise.DiskUnmanaged: Logon failure: unknown user name or bad password
I've tried to do it with BOXIr2Sp2, BOXIr2SP5 and BOXI3.1, but I still have the same error even if the uid and pwd are correct.
These are the parameters:
Directory: //192.168.100.5/Sinistri/BO
User ID: QUINSRV\user11
Password: ********
any ideas? Where am I going wrong?
Please HELP!!

Hi Camillo,
The following information might be helpful in resolving the issue.
In CMC, schedule a report, set Destination to "Unmanaged Disk"
Specify the Destination Directory to a UNC path pointing a shared folder on remote machine (such as: //machineA/sharefolder). The BOE machine and remote shared machine are in a workgroup environment.
Fill in User Name and Password fields for accessing the remote shared folder.
Click Update button
Schedule the report
Cause
This is due to non sufficient user rights. The user specified on the destination page in the CMC needs to have "Logon Locally" rights on the Job Server machine. This right cannot be assigned to a user from another computer if it is not in a domain.
This is a normal behaviour in a Microsoft Windows workgroup. This issue has been assigned Track ID ADAPT00136664.
Resolution
Workaround:
Create the exact same user account with the same password on both computers and specify that user in the destination page when scheduling the report.
Regards,
Sarbhjeet Kaur

Similar Messages

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

"Logon failure: unknown user name or bad password" even with correct Credentials

I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem.
I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
"Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
I don’t fully understand this error, because on the surface, it’s just WRONG!
My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
just purchased last month.
I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
The six computers are as follows: (I figured this may make is easier to visualize the layout)
HostPC: HP Desktop W8.1
PC Name: DrsBlend
U/N: DrsBlend p/w: 123456 (not showing my real password)
PC1: HP Laptop W8.1
PC Name: DrsBlend-1
U/N: DrsBlend    P/W: 123456
PC2: HP Laptop W8.1
PC Name: DrsBlend-2
U/N: DrsBlend    P/W: 123456
PC3: HP Laptop W8.1
PC Name: DrsBlend-3
U/N: DrsBlend    P/W: 123456
PC4: HP Desktop W7 SP1
PC Name: DrsBlend-4
U/N: DrsBlend    P/W: 123456
PC5: Dell Laptop XP SP3
PC Name: DrsBlend-5
U/N: DrsBlend    P/W: 123456
Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
PC5.
The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC.
It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
Anyone have any additional suggestions?

Hi，
How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
And could you please tell us the detailed information about how the six PCs connect to the home network?
Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
Yolanda Zhu
TechNet Community Support

My PC cannot find my Mac and also it ask for a password and I put it in and tell Logon failure:unknown user name or bad password

I need some help on my MAC about them problem that I have and the question is: My PC cannot find my MAC and it ask a question about putting in the password and I did it come back and said: Logon failure: unknown user name or bad password.
Thank You
Lumpy

You have to explain a little more fully what you are trying to do and what protocol. Whats your set up?

An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph

Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

Logon failure due to an internal error-webi client tool

Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.

In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp

Logon failure due to an internal error

Hi,
We have installed XI 3.1 SP3 (plus fixpacks) on a server and I am trying to access Web Intelligence on the client machine. I get the error "Logon failure due to an internal error." Any ideas what the problem may be?
I can login into Web Intelligence when on the server directly using remote desktop. I am on SP3 on the client machine but may not be on the same level for fixpacks - will check. Could that be the problem?
I can access the CMC from the client machine.
Thanks

Hi All,
I'll start by describing the basic logon connections made by all the client tools when connecting to a Business Objects CMS. From this hopefully it will help resolve the kind of issues described here.
------------------Background------------------
The CMS has a port number (6400). This port number is actually the port number of the name server. This name server stores the name, type of server, hostname and port for all the BusinessObjects servers that exist in the cluster. Whenever a program (such as a client tool) needs to know how to connect to a particular server, the name server will reply with the hostname (or IP) and port number to connect to. When each Business Objects server process starts it will register with the name server and tell it what its connection info (hostname and port) are.
In the case of a client logon it will first connect to the name server and then request the information to connect to the CMS service - (note that the name server and the CMS service are two logicial and seperate functions that the CMS process performs). The CMS service actually runs on the request port of the CMS.
------------------Cause of Logon Failures------------------
If you have no explicitly configured it, the hostname returned for connection could be the fully qualified name OR the short hostname of the machine and the port number will be random (and change each time the process is started). The client ALSO needs to be able to connect to the hostname and port returned by the name server to continue processing. If it can't then you will receive a logon error - in designer/desktop intelligence this will appear as a 'Transport Communication Error' in the deatils of the error message.
------------------Example------------------
You initially connect to boeserver.mycomp.com:6400. boeserver.mycomp.com is a DNS name that the client computer can resolve and the port 6400 is open through the firewall. The client connects to the name server (within the CMS process) and requests the connection information for the CMS services but these have not been explicitly set in the CMC->Server->CMS->Properties page.
The response from the nameserver might be to connect to the short name of the host: boeserver on port 54393 (or some other random port number). You will get a logon error if EITHER the hostname boeserver cannot be resolved (which can be quite common when the boeserver machine is in a different subnet) OR there is a firewall blocking the connection port (54393 in this case).
------------------Resolution------------------
Go to the CMC->Server->CMS->Properties page. Here there is a section where you can specify the hostname with with each business objects server will give as the hostname (or IP address) and port (request port) that it can be contacted on. In the example below I have said that it should be contacted on the fullyqualified name and on port 6401. Again 6401 would need to be open through the firewall.
No two servers can have the same request port. As you can see in the screenshot I have specified to connect to the CMS service on 6401 using the fullyqualified hostname boeserver.mycomp.com and finally that the name server port is the default 6400.
As mentioned previously there may be also other BOE servers that similar settings are required for, depending on the actions you are performing - e.g. IDT and designer need access to the input file repository server to input/export universes, WebiRich Client also should have access to the Output File Repository Server. Client tools should also have access to the Adaptive Processing Server that is running the Client Auditing Proxy Service so that any actions are audited.
One extra thing that can cause a block on the port number, other than a regular corporate firewall is the security on the server machine itself (e.g. the Windows firewall on the server can block incoming requests if there is not an expection created.
Regards,
Graham

SQL Server service not automatically starting (logon failure)

I just installed SQL Server 2012 on a machine. To run "SQL Server" as well as "SQL Server Agent" service I have created a domain account called SQLADMIN. This account is a service account and has no other rights like logon locally or
local administrator.
When the machine restarts, "SQL Server" service doesn't start automatically. When I click Start then it says "Logon Failure". Now if I simply enter the password again under tab "Log On" and then start service then it starts. Why
doesn't it start automatically?

Hello,
Please read the following article about permissions required by service accounts.
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx#Serv_Perm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
I do not see any special permission that is needed as per the article. For e.g. as per below:
SQL Server Service
Permissions granted by SQL Server Setup
SQL Server Database Engine:
(All rights are granted to the per-service SID. Default instance: NT SERVICE\MSSQLSERVER. Named instance: NT SERVICE\MSSQL$InstanceName.)
Log on as a service (SeServiceLogonRight)
Replace a process-level token(SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
I am running Database Engine service as DOMAIN\SQLADMIN account which can Log On As A Service. Other 3 permissions mentioned in article are not given so let me assign it and then see how it goes.
Could this issue be due to some domain policy? Because there is another SQL Server machine which shows same behaviour.

FIM CM Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)

Hi,
I am trying to install FIM Certificate management 2010. I am not able to access the CM Web portal. Whenever I login it shows the following error
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
This is the CM Log
1) Exception Information
Exception Type: System.Runtime.InteropServices.COMException
ErrorCode: -2147023570
Message: Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
Data: System.Collections.ListDictionaryInternal
TargetSite: Void ThrowExceptionForHRInternal(Int32, IntPtr)
HelpLink: NULL
Source: mscorlib
StackTrace Information
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Clm.Security.Principal.LoggedOnUser.Logon(String userName, String password)
"2014-04-16 02:48:50.98 -07" "Microsoft.Clm.Security.Principal.RevertToSelfContext"
"Microsoft.Clm.Security.Principal.RevertToSelfContext RevertIfImpersonating()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Reverting to the process identity
"2014-04-16 02:48:50.99 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:50.99 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
DoesResxFileExist
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Resx exists [C:\Program Files\Microsoft Forefront Identity Manager\2010\Certificate Management\web\App_GlobalResources\WebResources.en-US.resx] for culture: en-US? False
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
DoesResxFileExist
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Resx exists [C:\Program Files\Microsoft Forefront Identity Manager\2010\Certificate Management\web\App_GlobalResources\WebResources.en.resx] for culture: en? True
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Void Application_BeginRequest(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Web UiCulture: en-US. Web Culture: en-US
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationConfiguration"
"Microsoft.Clm.Web.Authentication.FilteredApplication MapPathToApplication(System.String)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Mapping path: [error.aspx]
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationConfiguration"
"Microsoft.Clm.Web.Authentication.FilteredApplication MapPathToApplication(System.String)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Path: [error.aspx] was not found in the configuration section.
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Path: [error.aspx], filtered: False
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Builtin Principal: System.Security.Principal.WindowsPrincipal, Identity: System.Security.Principal.WindowsIdentity
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Builtin Identity Details:
Name: PCEDOMAIN\Administrator
IsAuthenticated: True
AuthenticationType: Negotiate
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Custom Identity Details:
Name: PCEDOMAIN\Administrator
IsAuthenticated: True
AuthenticationType: Negotiate
Ticket:
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.03 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.03 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
Thanks

On Wed, 16 Apr 2014 10:15:55 +0000, Priyesh92 wrote:
I am trying to install FIM Certificate management 2010. I am not able to access the CM Web portal. Whenever I login it shows the following error
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
1. Make sure that you've got all of the required Kerberos delegation
settings and SPNs setup correctly.
2. Make sure that you've added the portal to Trusted Sites in IE and that
you configure the security settings to for Trusted Sites to log on
automatically.
3. Make sure that you have the password for the CLMWebPool account set
correctly.
Paul Adare - FIM CM MVP
But these are not inherent flaws in [NT]. They are the result of deliberate
and well-thought-out efforts. -- M$ Spokesweenie

New-OfficeWebAppsFarm : Logon failure: unknown user name or bad password.

Hi,
Recently we bought windows server 2008 r2 from myhosting.com . I tried to install office web apps 2013 on this machine. I followed this URL(http://technet.microsoft.com/en-us/library/jj219455.aspx)
to configure office web apps 2013 in the machine. After installed the office web apps 2013, I created the Office Web Apps 2013 Server farm in the machine using power shell command.
New-OfficeWebAppsFarm –InternalURL "http://vps1141344" –AllowHttp -EditingEnabled
When I run the command on power shell I got the below error
New-OfficeWebAppsFarm : Logon failure: unknown user name or bad password.
At line:1 char:1
+ New-OfficeWebAppsFarm –InternalURL "http://vps1141344" –AllowHttp -EditingEnable ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-OfficeWebAppsFarm], AuthenticationException
+ FullyQualifiedErrorId : System.Security.Authentication.AuthenticationException,Microsoft.Off
ice.Web.Apps.Administration.NewFarmCommand
Please help me some one to fix this issue.
Thanks,
Nattuthurai
Nattuthurai.K

hi, I encountered the same error with you,
i resolved the issue with following steps:
1. add you Office Web Apps server to domain;
2. login Office
Web Apps server as domain user;
3. run power shell as administrator;
4. run shell command;
5.success.
白云谦逊的站在天之一禺，晨光给他带上了彩霞。。。

System Error: Logon failure: unknown user name or bad password

Hello experts,
my system NW2004s (SPS14.1) is producing a lot of the following error messages caused by the internal user Guest... The system user Guest has all the necessary rights using a service user.
*getting mapped math - java.io.IOException: Logon failure: unknown user name or bad password*
at java.io.WinNTFileSystem.canonicalize0(Native Method)
at java.io.Win32FileSystem.canonicalize(Win32FileSystem.java:333)
at java.io.File.getCanonicalPath(File.java:513)
at com.sapportals.wcm.repository.util.file.StdFileImpl.getCanonicalPath(StdFileImpl.java:74)
at com.sapportals.wcm.repository.util.file.StdFileImpl.getCanonicalFile(StdFileImpl.java:70)
at com.sapportals.wcm.repository.manager.sfs.FSRepositoryManager.startUpImpl(FSRepositoryManager.java:141)
at com.sapportals.wcm.repository.manager.AbstractRepositoryManager.start(AbstractRepositoryManager.java:538)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToStart(CrtThreadSafeComponentHandler.java:246)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler$1.run(CrtThreadSafeComponentHandler.java:252)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:382)
I am not sure about the severity of the error. I can observe the error message almost every minute in the Log file and I have the impression that this message occours more often before the portal has more "problems" in general and is for a short time not accecible (it freezes and sometimes a java server restarts itself). I am asking myself if this error message could give a hint for the system crash we have had today. (a restart of the host was needed.)
However I would like to know what causes the error message?
It is a critical error message? It means can it cause a system crash? Or is it not important?
What can I do to solve the problem?
I appreciate your helful answers.
Thanks in advance.
Thomas

I think the password for the proxy account needs to be changed (expired)
Arthur My Blog

ICM services not starting up due to logon failure

Hi,
I have UCCE 8.5.3 in my setup as duplex mode as Progger A and Progger B and AW/HDS on another server.Every time if i cycle or restart the logger and AW services an error pops up - Services cannot start up due to Logon failure. I have checked ther services account manager and its in default ICM domain account and the connection is healthy. Every time i have to edit the service account to start the Logger and AW services.
Can any one help me on this.
Thanks,
R

Hi Rahul,
Try using local system account rather than Domain user account as shown below:

Logon failure; the user has not been granted the requested logon type at this computer (IE App)

Hello,
Question of a newbie:
In Windows Server 2012 I'm using IE10 to simulate numerous different users. But for some of these "fake" users I got the error:
Logon failure; the user has not been granted the requested logon type at this computer.
So I opened PowerShell : GPEDIT.MSC
Computer Configuration / Windows Settings / Security Settings / Local Policies / User Rights Assignment.
In the detail zone : Double-Clic sur Allow log on locally.
Dialog box : Allow log on locally properties
But the Add User or Group
button is grayed out!
What can I do?
Thanks for your help!

Several months after...
I found the solution : the user has to be member of the Server
Operators in Active Directory.
That's all :)
Thanks

How do i troubleshoot CAS logon failure in W2K

i have installed netscape directory service 4 (with ias), and calendar server on Windows 2000 Advanced Server. Upon rebooting the CAS service fails to start due to a logon failure (unknown username or password).
i am assuming CAS is attempting to logon to LDAP but
how do i find what username/password is being used?

Thanks for the response, @Tesserax.
I live in a single-family home, so the neighborly bandwidth can't be very high or growing at a high rate. For sure, I wouldn't expect things to suddenly stop working but rather a slow degradation. Also, I cannot maintain a wireless connection when standing next to the router.
And, no, we don't even have a landline phone system. Just a couple cell phones here.
I'm not sure about your question of wireless clients connecting to other wireless clients. I cannot really even get on my wireless network to connect to other wireless clients. For instance, my iPad gives me an "Unable to join the network" dialog.
I do have two computers talking to each other wired-to-wired through the network. They share a mouse+keyboard via Synergy. I will say I shut down the router overnight and plugged it back in this AM and there was a moment there where I didn't think the wired connection was working, either. But it's been solid throughout the day.
Thanks again!

Unable to find OWA logon failures in security log

After I fail to authenticate in Outlook Web App, I could not find the logon failure events from the security log in CAS 2010 server. Please advise.

I'm assuming (and I think it makes sense) that it is an ODL logging format.
[2013-05-15T17:13:34.337-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: Thread-83] [userId: <anonymous>] [ecid: 0000JucH_VM3n3wb0DMaMF1H^sQy000000,1:18515] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: logTimeEnd] PERF: 0000000009 UserConnection oAdm.openConnection I think for all EPM components the execution context is started by anonymous. Check this chapter *11.2 Understanding ODL Messages and ODL Log Files* http://docs.oracle.com/cd/E15523_01/core.1111/e10105/logs.htm
Regards
Celvin
http://www.orahyplabs.com

CrystalEnterprise.DiskUnmanaged: Logon failure

Similar Messages

Maybe you are looking for