Crystalrep:how to use the summary of subreport to calculate in main report

mainreport main main sub      sub   main
Salesman      sales    Cost   Travel   Taxi   Margin
A1             100       50       20       20     sales-cost-travel-Taxi
A2             200       100     20       20     sales-cost-travel-Taxi
A3             300       200     40       30     sales-cost-travel-Taxi
eg.: A1 margin=100-50-20-20=10
main report linked to subreport by salesman and confirmed the data in report is correct. but the summary of travel and taxi is from subreport, if i want to calculate the margin, the travel and taxi can not be insert to the formula, only sales and cost can be calculated
how can i process travel and taxi ?

If you search the kbases (articles) for "c2007600" or "how to share subreport data with main report" you'll find what you need.
NOTE: One can NOT use data from a subreport object in a section in the main report that is previous to the section in which said subreport is located.

Similar Messages

How to use the field of 'FM for Determining Address' in report RSWUWFML2?

Dear gurus,
In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
Regards
David

I will test soon. Thanks to all involved.

Multiple subreports within a single main report?

I'm a newbie to BI Publisher, but have used Crystal Reports quite a lot.
I have a requirement which essentially consists of a set of 7 similar and closely related reports, each using a different SQL Select statement and printing different columns; the user will have the option of selecting either one of the 7, or all of them.
In Crystal Reports I would set up 7 subreports within a single main report, and depending on the parameter, suppress those subreports which are not required.
Is there a technique within BI Publisher which would enable me to achieve the same thing?

all the sub templates will go against a single XML. So if your sub reports in CR is handling different query, you need to take a step back and think of separating data and layout. So multiple queries will be handled by data templates. So, for example, if your main report fetches some records as Q1 query, and you have two sub templates with queries as SQ1, SQ2 (linked subreport). Then we have to see what relationship exists between the main report and the subreport. Say, the sub report query creates a relationship with the Main report data, to filter certain records. So this can be achieved in data template using Q1 and SQ1 using bind relationship, ie, Q1 is master query and SQ1 is a detail query. Similarly Q1 and SQ2 relationship can be established. The datatemplate when executed, will fetch a single XML data.So in this case you do not need sub template. The sub-report layout is not separate, and is to be created with the main report.
In case of unlinked subreport, the content of subreport is independent of main report, so you can simply define two datasets in BI Publisher and then select the Concatenation option. So the final XML data will be a concatenation of two XML data. The main report can read data of the main XML and the sub template can read data from the appended XML data. This can be done using xPath.

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
        xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <af:document title="untitled1.jsf" id="d1">
        <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
        <af:resource type="javascript" source="resources/js/home.js"/>
        <af:messages id="m1"/>
        <af:form id="f1">
           <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
            <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
                <af:noteWindow id="popupWindow">
                    <af:panelFormLayout id="pfl2">
                        <af:panelLabelAndMessage label="Task id" id="plam5">
                            <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Start Location Name" id="plam6">
                            <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
                            <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="tasktype" id="pla2m7">
                            <af:outputText value="#{homeBean.taskType}" id="ot9"/>
                        </af:panelLabelAndMessage>
                    </af:panelFormLayout>
                </af:noteWindow>
            </af:popup>
            <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
            <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
                                 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
                                 showMenuBar="false" showToolbar="false" iconPlacement="left"
                                 showTasksAsDailyBar="false">
                <f:facet name="major">
                    <dvt:timeAxis scale="days" id="ta1"/>
                </f:facet>
                <f:facet name="minor">
                    <dvt:timeAxis scale="hours" id="ta2"/>
                </f:facet>
                <f:facet name="nodeStamp">
                    <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
                               headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
                        <af:outputText value="#{row.PersonId}" id="ot1">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
                        </af:outputText>
                    </af:column>
                </f:facet>
            </dvt:schedulingGantt>
        </af:form>
    </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
    $("div[et]").live('mouseover', function (e) {
         $('#cb1').css("position", 'absolute');
         $('#cb1').css("top", e.pageY-4);
         $('#cb1').css("left", e.pageX);
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        var element = AdfPage.PAGE.findComponent("f1");
        var taskIdToPass = null;
        if ($(this).attr("tid") !=undefined) {
             taskIdToPass = $(this).attr('tid').toString();
        } else {
            taskIdToPass = $(this).parent().attr('tid').toString();
        var param = {            taskId : taskIdToPass        };
        AdfCustomEvent.queue(element, "jsServerListener", param, true);
        if (!popup.isPopupVisible()) {
            var hints = {};
            hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
            popup.show(hints);
    }).live("mouseout", function () {
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
    private RichPopup popup;
    private String taskId1;
    private String startLocation;
    private String stopLocation;
    private long taskId;
    private String taskType;
    public HomeBean() {
        super();
    public void serverEventHandler(ClientEvent clientEvent) {
        String taskIdString = clientEvent.getParameters().get("taskId").toString();
        this.taskId = Long.parseLong(taskIdString);
        DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
        ApplicationModule am = dc1.getApplicationModule();
        ViewObject vo = am.findViewObject("PdTrfDayView1");
        RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
        Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
        Row row = rows[0];
       this.taskId1 = row.getAttribute("PdTrfDayId").toString();
       this.startLocation = row.getAttribute("StartLocation").toString();
       this.stopLocation = row.getAttribute("StopLocation").toString();
       this.taskType = row.getAttribute ("PdTrfTypeId").toString();
        RichPopup.PopupHints ph = new RichPopup.PopupHints();
        vo.closeRowSetIterator();
    public long getTaskId() {
        return taskId;
    public void setPopup(RichPopup popup) {
        this.popup = popup;
    public RichPopup getPopup() {
        return popup;
    public String getTaskId1() {
        return taskId1;
    public String getStartLocation() {
        return startLocation;
    public String getStopLocation() {
        return stopLocation;
    public String getTaskType() {
        return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

How to use the Java embedding activity in BPel

hi all,
How to use the java embedding activity in BPEL
pls can u provide sample example

1 Use [Oracle BPEL Process Manager Client Java API Reference|http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/overview-summary.html] and especially [com.collaxa.cube.engine.ext|http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/com/collaxa/cube/engine/ext/BaseBPELXExecLet.html]
Instead of System.Out.println use addAuditTrailEntry(java.lang.String message)
2. If you want to import a package write in code (Source View) of bpel process
+<bpelx:exec import="package_name"/>+ for example +<bpelx:exec import="java.util.regex.Matcher"/>+
example 1:
String bodyAsString;
StringBuffer myStringBuffer = new StringBuffer();
try {
bodyAsString = (String)getVariableData("BodyString");
addAuditTrailEntry("bodyAsString1: "+ bodyAsString);
Pattern pattern = Pattern.compile("goodDay");
Matcher matcher= pattern.matcher(bodyAsString);
while (matcher.find()) {
matcher.appendReplacement(myStringBuffer, "shitDay");
matcher.appendTail(myStringBuffer);
bodyAsString = myStringBuffer.toString();
addAuditTrailEntry("bodyAsString2: "+ bodyAsString);
} catch (Exception ex) {
addAuditTrailEntry("Failed+bodyAsString",ex.getMessage());
I put in code (Source View) the following
<bpelx:exec import="java.util.regex.Matcher"/>
<bpelx:exec import="java.util.regex.Pattern"/>
example2:
Object temp;
try {
temp = ((XMLElement)getVariableData("inputVariable","payload","/ns2:FiscalisMessage/ns2:Body")).getChildNodes().item(1);
setVariableData("AdjReceipt",temp);
addAuditTrailEntry("ok",temp.toString());
catch (Exception ex) {
addAuditTrailEntry("Failed :",ex);
I put in code (Source View) the following
<bpelx:exec import="oracle.xml.parser.v2.XMLElement"/>

Bug or I don't know how to use the software?

I am using shared variables to summarize data to a main report for orders (in the main report) and credit notes (in the subreport) to the main report. I then have a formula that restates the sum of my orders per salesperson, done so that I can use that formula in a chart.
When I attempt to use that formula in a summary on my chart, it disregards the element of the original formula that was from the subreport (the credits) and only shows the part of the subtotal that relates to the main report.............
Is there a trick to this?

Hi,
Try creating a running total in the subreport.
Pass it in the main report and then use it in the chart.
Regards,
Sumit Kanhe

HT1382 How to use the i-tunes to backup my iphone apps, thanks

How to use the i-tunes to backup my iphone apps, thanks

Plug the iPhone into the computer.
From the Summary tab, select the option to backup to iTunes on the computer.
Sync.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

Crystalrep:how to use the summary of subreport to calculate in main report

Similar Messages

Maybe you are looking for