CS3 Color Customizer Help

I'm trying to duplicate the customizer found here:
http://www.reebokhockey.com/gear/products/goalie/customizers/product/premier-iii-sr-pro-cu stomizer/
But make a few tweaks to it. I'm using CS3 and AS3 to build the file but really am a novice with working in any kind of action script. I was able to get the file this far:
http://stinehour.com/premier3.html
There are really 4 changes I'm trying to figure out.
1. need to figure out the if statement that would change the color on the logo to white if the background was dark.
2. need to figure out how to do the "embossed" colors which I assume would be an overlay of a graphic
3. need to figure out how to get color names to show. I can get it display the hex numbers, but not sure how to change the name
4. I'd like to eventually figure out how to have the color pickers transfer the color to an html dropdown. I actually wouldn't mind getting rid of the color box pickers if I could get the dropdown to feed the flash file.
Are there any tutorials or online help sources that you'd suggest to accomplish these things?

Thanks for silent help!
Now it's work properly.
But I declaired classes ISelectionManager and ITextEditSuite in WRPDialogController.cpp.
That's mean:
#include "ISelectionManager.h"
#include "ITextEditSuite.h"
don't embeded.
What is this mean? Help please with this now!

Similar Messages

Photoshop CS3 color help.

Got photoshop cs3 color worked for brushes for a while then stopped. I tried everything I could with the scales and swatches and nothing helps.. any ideas?

dave milbut wrote:
John Joslin wrote:
It deletes them from the palette, not from the hard drive. They can be reloaded from where they were saved.
if you haven't saved custom brushes externally DO SO before resetting the brushes!
Yes, thanks for that. That was my implication but I should've spelled it out.

Lightroom/CS3 color issues on Mac

Hello,
I've seen a few posts about color issues, and I've tried following the advice posted, and I'm still having a problem. My photos appear fine in PS and in Lightroom (as well in in Mac's previewer) but when I upload them to the web or view the saved file on another computer, they appear severely desaturated with a blue tone.
I'm using running Mac OX X on a new MacBook Pro. I have Lightroom and CS3 installed and fully patched.
I am shooting in RAW with my Nikon, and importing the photos to Lightroom. In Lightroom, I choose "edit in CS3" and then the file opens in CS3. My settings for that are to open it as a 16 bit PDF ProPhoto RGB. My color settings in CS3 are set to ProPhoto RGB working space, preserve embedded profiles, ask when opening and pasting.
The files still look great when I open them in PS, and then I save them and when I look at them again in Lightroom they also look good (the same). However, if I export them as .jpgs from Lightroom, or save them directly from CS3, they lose their color quality.
I've found that if I change my proof setup to "monitor RGB" then I can see the photos the same way they appear when saved (the bad, desaturated version).
I would really appreciate any help anyone could provide. I am generally happy with my Lightroom/CS3 workflow, but I'm totally baffled with this color issue.
Emily

Well, I think what you need to do is get a better grasp on the fundimentals of color management-which is a bit beyond the scope of what the forums can offer you.
The bottom line is that Lightroom & Photoshop CSx (meaning past CS or actually even back to 7) can and does make use of display profiles (you can't turn it off even if Photoshop has a setting that makes you think you can). An image in Lightroom and Photoshop is always color managed...outside of an app that is color management, all bets are off.
Save, assigning and converting to profiles are all very different. Photoshop CS3's color settings are absolutely critical because that's how you deal with managed and unmanaged color.
Until you learn different, I would suggest that you set your CS3 color settings to North American PrePress 2....if you want images for the web, Convert To sRGB or use the new Save For Web (which can now do the sRGB conversion-finally).
For other uses and purposes, I would suggest that you seriously consider using Adobe RGB-until such time that you understand the implications of using Pro Photo RGB.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

CS3 color management won't match prints

Okay, I know there are a lot of boneheds who can't figure out how to set up color in Bridge and CS3 but I am at my wits end on this so bear me out.
Windows XP and CS3
Bridge is set to; Enable color management in Bridge
RAW conversion is SRGB
CS3 color settings/working space set to SRGB
Print color management is set to SRGB and Photoshop manages colors
Printer is set to "application manages colors" (HP B9180)(btw, I have also tried it set to SRGB)
Image looks the same on Bridge, RAW conversion, CS3 and print screen (dark)Image looks LIGHTER when viewed with any other program (including windows picture and fax viewer, HP print program, Paint Shop Pro and online) and prints to match the lighter image both on my HP and from my lab!
The closest I have been able to get to a total sync is to set Photoshop's color settings to "Monitor color," and uncheck the box in Bridge that says "apply color management settings in Bridge." In that case, Bridge and CS3 produce a lighter image but RAW conversion is still darker. Plus, who the hell wants to use monitor color in Photoshop!?

That's pretty much it David... I could get Photoshop to match my prints but then any other program would show the prints as being waaaay off-color.
Today I bought a spider2express and color balanced my monitor. Now everything seems to look in sync and my prints match very close (a little warm for my tastes..). Tech support at Photoshop told me it was a calibration issue but I thought that was bull... i mean, how can calibration make an image that looks different in two different programs look the same? Well, it does. As far as I understand it now (layman's terms)when you look at an image in windows viewer ot explorer or any other non-color management program you are looking at the image based on your monitor profile. When you look at the same image in photoshop the program uses it's own color management which then gets filtered through your monitor program to your eyes (but not to the printer). If your monitor profile is bad, the image looks bad.
Or something like that :)

Dynamic Color Customization

Does anybody know where I can get the source code (ie, color.pll and fmb) to implement the "Dynamic Color Customization" in the Oracle Forms?
I saw this white paper in the Forms product center by Oracle Forms community and wondering about the source code.
Thanks

Hello,
<p>The pl/sql code is available here</p>
Francois

About Java 2 opaque font color question, help needed!

About Java 2 opaque font color question, help needed!
I was trying to test opaque font (the string has a foreground color and a background color), but i can't find the method for doing that.
i can change foreground by Graphics2D.setPaint(Color.black).
Anybody know how to change the background of the string?
Thanks!

Hi. The way I'd do it would be to use the font metrics to find the length of a string and draw a rectangle and then drawstring over the rectangle. If you want an example, I can post it although I suspect theres a better way.

Color range HELP #2

OK - I guess I need a little more guidance with the specifics of the step-by-step - do you have time to explain a little more in detail? Many thanks again, it's greatly appreciated! Original post below:
I need to change the color of this boat hull from blue (which is very monochromatic, solid blue) to a sage green (also attached for reference as per client request) and I'm having a really hard time with it. I need to be able to maintain the reflective nature of the paint on the sunny side and subtle shadow variations, so can't simply paint it in with replacement color. Maybe a combination of desaturation in an HSL layer, and channel mixer or replacement color in some way? At least it's easy to mask...
A Curves Layer to edit the luminance and a Solid Color Layer set to Blend Mode Color might help, both in a Group with a Layer Mask.

As basis for the Mask I actually used the a-channel of a copy of the image in Lab-mode, which I edited with curves and painted out the regions that exceeded boat and reflection.
This is used as a Layer Mask on a Group that contains a Solid Color Layer (af a desaturated green) set to Blend Mode Color under which I put a Curves Layer (set to Blend Mode Luminance) to lighten the affected regions as they appeared faily dark otherwise.
Switching to 16bit might help if banding becomes noticable.
Edit:

Woke up and my phone was completely dead. Won't turn on, no charging, nothing at all. Thought maybe some kind of water damage because it was on my windowsill, but neither of the water detectors have turned a color. Help?

Woke up and my phone was completely dead. Won't turn on, no charging, nothing at all. Thought maybe some kind of water damage because it was on my windowsill, but neither of the water detectors have turned a color. Help?

No that’s probably what I’ll do. I'm thinking the guys at the apple store can only do basic technical support since most of them are sales people that don't know how to physically repair phones. It seems kinda silly that, as fine as a product the iPhone is, when something like this happens they just tell you to replace the entire device without doing any proper diagnostic. If it was any other phone you could simply take it to a cell phone repair shop and they'll usually fix it. It’s almost as though Apple assumes their products will never fail so that when they do, the only solution is to replace the entire device at a cost higher then it would be if it was just a simple fix. So hopefully the local cell repair shop can do something instead of having to replace the entire phone. I'll accept the fact if I have to replace it after taking it to a few places and having some real technicians look at it, instead of a 5 minute trial and error diagnostic done by a sales associate at the apple store being quick to tell me that the phone is useless and has to be replace for several hundreds of dollars.

Help please. Vista / CS3 Color Managment issue. Going nuts...

Hi all.
I'm in desperate need for some assistance since time is running out on a project that needs Powerpoint.
If I use color management in Bridge and look at my NEF and Jpegs they look somewhat desaturated and lacking vibrance as in comparison to another program, like AcdSee.
When i open up in Camera Raw, and then Photoshop, it looks the same. But hwen I copy to Powerpoint - it looks very vibrant and with a lot of saturation, luminance and hue. But it looks much better "eyecatching".
If I shut of color correction in Bridge, then the picture looks just as vibrant and nice as the end result in powerpoint and it looks just as good as in AcdSee! But the steps in between, that is Camera Raw and Adobe looks awful, and I'm supposed to make some color adjustments etc, making it absolutely impossible to know what the end resutl will be, since the color management is ON in Camera Raw and Photoshop.
I've callibrated my monitor, spyder3, I've set Adobe Bridge to use CS3 for monitor. I've tried alternating between Adobe RGB and sRGB. I've tried everything there is, but the colors in Camera Raw and Phtoshop are very wrong in relation to the end result. Can I shut down color management in Photoshop? Change it to Vista's? I know Adobe is right at the end of the day, it just doesn't work with the end result!
To add on to this, I've tried AcdSee and colors are correct in the RAW format. Thus, they don't have the same color correction and this looks exactly like the end result in the powerpoint.

>> the colors in Camera Raw and Phtoshop are very wrong in relation to the end result
Then you need to Photoshop> Convert to profile> Save As to the profile based on the end result because the end result sounds like an unmanaged application.
This is likely sRGB -- have you tried this?
What monitor, what did you profile it to (2.2 gamma/6500)?
http://www.gballard.net/psd/assignconvert.html

InDesign CS3 Color Printing Incorrectly - Please Help!

I purchased Creative Suite 3. When I print photos in Indesign, the colors do not print accurately. It looks liked I smeared orange sherbet all over the photo. I still have InDesign CS on the computer and I did a test print and the color is fine. I tried reinstalling CS3 Suite and the same things occurs. Any thoughts?

This is probably a color management issue.
Color management was off by default in CS, and is on for later versions. Unless you've calibrated your monitor and embedded profiles in your images, I suspect that what you are getting from either program is hit-or-miss and may not resemble the "real" color in the image file, particularly if there is no accurate profile for your printer.
Painful as it is to say, the best thing you can do is go to the library or bookstore and get a book. I highly recommend Real World Color Management as the easiest to understand resource I've seen.
Peter

Any apps to enable more color customization for Windows 7 interface?

Windows 7's default UI customization feature set is lacking and incomplete. Any apps that can solve this?
Personally, I would be interested in an app for Windows 7 that will allow changing the "glow" color around the text of windows' titles. Because I use a dark theme and the current unchangeable white glow clashes with my dark theme. I would like
to be able to set that glow to black and my windows’ title text to white.
Additionally, there is a permanent light blue tinting on a lot of the Windows 7 UI. I would prefer to set that to gray so it can fit universally with any color theme. Or better, be able to adjust the color of the tinting.
And then there is the green progress bar--I personally would prefer to be able to set that to a blue. Or better, be able to set that to any color.

Hi,
To set the color of Windows Title bar, please go to Windows Color and Appearance to check the result.
Right click desktop -> Personalization -> Windows Color -> in the item list, choose
Active Title Bar -> change its color 1 and 2
To change the color of the tinting, please refer to the following steps.
1. Make sure your computer's brightness is on full.
2. Go to Start -> Control Panel -> Display.
3. On the left bar, click Calibrate Color.
4. Follow on the on screen instructions to correct your gamma.
5. After you're done with this, on the next screen click "Skip brightness and contrast adjustment"
6. Click next, then you'll l be on the color balance adjustment screen, which is where you will correct the blue tint.
The slider on the right where the color blue is located, slide the slider to the left 3 notches. Adjust as needed based on your screen.
7. On the next page you'll have the ability to switch between what you had it on previously and what you set it to.
To set the green progress bar to blue, please see if the following article is helpful.
http://www.sevenforums.com/customization/19207-blue-progressbars-windows-7-a.html
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Replace Color - selected areas turn gray instead of desired sample color. HELP?!

Hi, I am using Photoshop CS3 and have a question regarding "replace color."
First...here are the steps I enacted prior to trying to use the 'replace color' function:
1. In RGB Mode - - Selected and filled a shape a color.
2. Ran the selected object through Alien Skin/Impact "Chrome" function.
3. Selected 'adjustments/desaturate.' Did this so that I could then go to Adjustments/color balance..... and then change the entire color of the object to a predominantly red chrome looking scheme.
4. After giving the object a 'chrome' appearance, I wanted to go into the 'white' hilite areas of the object and sample them - and then change them to a bright red color....this is where the 'REPLACE COLOR' function comes in.
5. So I use the color sample eye dropper within 'REPLACE COLOR' and select the white areas I want to change to red...as the 'selection color.'
6. Then, I click down in the lower color box (result color) and sample a color that I want to change the white hilite areas to...in this case, red.
7. This is where the problem occurs - - even though I chose a result color of red...the white areas turn to grayscale within my colored object...so just those areas are gray!!! What the heck??!!
So... how can I desaturate a selected object... then recolor it using 'Color Balance'.... and then replace colors and have the replaced colors actually be a color instead of a gray color?
My file is in RGB mode and everything else is in COLOR.... yet I cannot replace areas within this colored graphic with other colors...it just keeps putting gray tones into the object.
HELP??
Thanks.

Hi Curt - - this occurs even if I select a color within the same file... something about desaturating the file and then adding color back into it...I can't get it to replace color after that.

Pages background color customization for poster template?

HOw can I customize the color of the background on the template poster on pages for iPad? It is normally blue and I would like to change it.

Hi Satyadev,
You have 3 options:
Within the forms builder you can get a white background by setting the form to either "border" or "no border". This is done by clicking anywhere on the form (where there is no other element) and modifying the "style" property
You can modify the portal theme so that the background colour is your choice. However this will affect all forms in the portal, not just this one.
Or you can manually modify the form XSL stylesheet. This involves typing the html code to apply your chosen colour. However, this modification is lost if you re-generate the XML forms project, so this should be a last resort.
Hope this helps,
Chris

OSX + Epson 2200 + CS3 and LR2 - help!

Please help.
I just moved to a Mac Book Pro running Mac OS X 10.5.4 (9E17) and the latest CS3 and LR2. I have used an Epson 2200 successfully for years on my previous Windows machine. I have a color managed system. Now I have several issues on the Mac. Any suggestions will be greatly appreciated.
My issues:
1) I see all of my profiles (icc files) in the CS3 Print screen but none are listed in the Epson printer setup screen. Why?
2) My prints are awful; very magenta and with banding. Something fundamental is set incorrectly. What could it be?
3) I read about Epson Easy Print but I still have to go into the Epson Printer setup screen from the CS3 or LR2 print screen to, for example, turn off color management. Why?
4) In LR2 when I go to the Epson Print setup screen and try to select Print Setting or Color Management, they are lined-through and I receive this message: "The bundle Color Management could not be loaded because it does not contain a version for the current architecture". Any ideas on this?
Thanks in advance for your help.
Dave

Thanks. I already did all of that. A couple of times.
Checking all the sites it looks like there is confusion about what driver I should be using. I did get the latest one from the Epson site. I am confident it is the correct one. But then I read on both the Epson and Apple sites that the OS already has the latest version and not to install another one. So I wacked them all and let the OS do it. Then it installed the Gutenprint driver. And that didn't fix the issue either.
I need to read more about the Open-source printer drivers (CUPS, Gimp-Print, Easy Software Products)that seem to come with OSX.

CS3 Color Customizer Help

Similar Messages

Maybe you are looking for