CS3 Components panel problem

Hi everyone,
I'm developing a CF8 application in Dreamweaver CS3. If I go
to the Components panel, I can see the application's components
listed, but if I click the "+" next to any of them to see the
methods, I get the error "There is a problem with this CFC." Anyone
know how I can resolve this?
BTW, the components work fine in the application; it's just
that I can't browse them in the components panel.
Thanks,
Russ

I was having the same problem in Dreamweaver CS4/10. I found this article and low and behold it worked!
http://forums.forta.com/messages.cfm?threadid=34621DAF-3048-80A9-EF22911CE2D2E463#9
I had "Separate user name and password authentication (allows multiple users) " enabled in the CF administrator under "Security-Administrator" and "Security-RDS".
After I disabled it/set it to "Use a single password only (default)" for both, I could see all my CFC's.
Good luck!
MIke A.

Similar Messages

Dreamweaver CS3 - components panel not working?

When I try to view the components panel I go through all the signing in for RDS and receive the following error: I have seen this error posted last year but no one responded to the poster? Is there a solution?
Thanks
Susan G.
The packages and the CFCs within them cannot be listed. There are several reasons that this may occur.
1. The URL prefix (specified when you set up this Dreamweaver site) might be ill formed. Please check the URL prefix by using Define Sites on the Site menu.
2. The URL prefix might correspond to a website where CF MX is not running
3. The URL prefix might correspond to a website to a website that has no CF component. Press the plus button on this panel to create a CF component.

I was having the same problem in Dreamweaver CS4/10. I found this article and low and behold it worked!
http://forums.forta.com/messages.cfm?threadid=34621DAF-3048-80A9-EF22911CE2D2E463#9
I had "Separate user name and password authentication (allows multiple users) " enabled in the CF administrator under "Security-Administrator" and "Security-RDS".
After I disabled it/set it to "Use a single password only (default)" for both, I could see all my CFC's.
Good luck!
MIke A.

Dreamweaver CS3 - Database Panel Problem

I set up a site in Dreamweaver CS3 trial - my ColdFusion data
driven pages display OK in browser preview but I when I try to
display my datasources in the Database panel I get error "server
name or address cannot be resolved" even though the server name is
correct and working. The site's testing server is set up properly
(they run in the browser) and coldfusion is running properly.
I removed the connection scripts but that was no help. I'm
using the miserable SQLServer 2005Express (I tried checking
security permissions in WinXP - my file system is NTFS so there
*should* be a "Security" tab present in properties for me the
change permissions but it's not there...
i've run out of ideas - does anyone have any suggestions that
I can try?
thanks!

schep wrote:
> I set up a site in Dreamweaver CS3 trial - my ColdFusion
data driven pages
> display OK in browser preview but I when I try to
display my datasources in the
> Database panel I get error "server name or address
cannot be resolved" even
> though the server name is correct and working. The
site's testing server is
> set up properly (they run in the browser) and coldfusion
is running properly.
>
> I removed the connection scripts but that was no help.
I'm using the
> miserable SQLServer 2005Express (I tried checking
security permissions in WinXP
> - my file system is NTFS so there *should* be a
"Security" tab present in
> properties for me the change permissions but it's not
there...
>
> i've run out of ideas - does anyone have any suggestions
that I can try?
> thanks!
>
I can't help you with the central issue, but permissions in
XP are
controlled by a setting in folder options.
start, control panel, folder options, view. Near the bottom
of the list
is an option that by default is checked - "Use simple file
checking".
Try unchecking it, and you should be able to access the full
security
tab for files.
Harvey

ANN: AIR Components panel Extension

Hi there, after a long time of absence in the Dreamweaver
area, I'm happy to
announce that my latest extension, the AIR Components panel
for Dreamweaver
has been approved by Macromedia and is available for download
at the
Exchange.
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1260 018
The AIR Component Panel Extension for Dreamweaver parses the
contents of the
AIR Aliases and Code Hints to provide a tree view of the AIR
Class library
and drag and drop support via the component panel in Dynamic
Documents for
the following Server Models: ASP_Js, ASP_Vbs, ASP.NET_Csharp,
ASP.NET_VB,
JSP, PHP_MySQL, PHP_ADODB and HTML
This first version provides basic support for drag-drop
insertion of AIR
aliases and codehints, I'm planning to add more features in
future versions
such as popping up codeHints automatically after inserting an
Alias and
Dialogs for configuring the inserted code. I would love to
hear from you
about your Bugs, and feature requests.
Note that the extension depends on the codehints installed by
the AIR
Extension for Dreamweaver Beta from Adobe, if the codehints
are not
available only the first level of AIRAliases will be shown.
regards
Joris van Lier

Thanks Andres for reporting this issue, it seems that the
extension somehow
goes into an infinite loop while extracting the CodeHints,
I'll investigate
and try to fix it.
Joris
"Andres Cayon" <[email protected]> wrote in message
news:[email protected]...
> I'm having problems with the URLRequest class:
> When you try to expand it, DW hangs for a while until
this message
> appears:
> "A script in C:\Program Files\Adobe\Adobe Dreamweaver
> CS3\Configuration\Components\Common\AIR\AIR.js has been
running for a long
> time. Do you want to continue?
>
> If you click 'yes', the same message is shown again
after a few seconds;
> if you click 'no' then a new message is displayed:
>
> "While executing getComponentChildren on AIR.htm, a
JavaScript error
> ocurred"
>
> Thanks!
> Andres Cayon
> Spain Adobe Dreamweaver User Group
>
http://www.dwug.es
> ----------------------
>
>
> "Joris van Lier" <[email protected]>
escribió en el mensaje de noticias
> news:[email protected]...
>> You can put it in the forum so it's searchable,
>> if you're talking about closing the last document
and getting an error,
>> I've already submitted v 1.0.2 to the exchange that
should fix that.
>>
>> However, I think I'd better re-implement it as a
floating panel, the
>> current AIR beta extension only provides Packaging,
code-hints and
>> colors support, until the final version is released
I have no idea about
>> the way AIR will be integrated in Dreamweaver. It
would seem logical to
>> create a "server model", that's why I used the
Components API, but
>> behaviors are also possible.
>>
>> Joris
>>
>> "Andres Cayon" <[email protected]> wrote
in message
>> news:[email protected]...
>>> Aaaah, got it 8-)
>>> Document relative ones. It works like a charm
with absolute ones 8-)
>>>
>>> Also, I found another problem (sorry, but I
can't stop playing with the
>>> panel): Do you prefer to receive it privately?
>>>
>>> --
>>> Andres Cayon
>>> Spain Adobe Dreamweaver User Group
>>>
http://www.dwug.es
>>> ----------------------
>>>
>>>
>>> "Joris van Lier" <[email protected]>
escribió en el mensaje de
>>> noticias
news:[email protected]...
>>>> Thanks Andres, I'll look into it , are your
using document relative or
>>>> absolute paths?
>>>>
>>>> "Andres Cayon" <[email protected]>
wrote in message
>>>> news:[email protected]...
>>>>> Hi Joris:
>>>>> The panel looks great!
>>>>> Just a feature request so far:
>>>>> I've noticed that the panel has problems
if the js file is not in the
>>>>> same folder than the current document.
It would be perfect if the
>>>>> panel were able to search for the path
included in the src attribute.
>>>>>
>>>>> Anyway, a real time saver: Just the
ability to see the whole tree at a
>>>>> glance is fantastic!!
>>>>> --
>>>>> Andres Cayon
>>>>> Spain Adobe Dreamweaver User Group
>>>>>
http://www.dwug.es
>>>>> ----------------------
>>>>>
>>>>>
>>>>> "Joris van Lier"
<[email protected]> escribió en el mensaje de
>>>>> noticias
news:[email protected]...
>>>>>> Hi there, after a long time of
absence in the Dreamweaver area, I'm
>>>>>> happy to announce that my latest
extension, the AIR Components panel
>>>>>> for Dreamweaver has been approved by
Macromedia and is available for
>>>>>> download at the Exchange.
>>>>>>
>>>>>>
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1260 018
>>>>>>
>>>>>> The AIR Component Panel Extension
for Dreamweaver parses the contents
>>>>>> of the AIR Aliases and Code Hints to
provide a tree view of the AIR
>>>>>> Class library and drag and drop
support via the component panel in
>>>>>> Dynamic Documents for the following
Server Models: ASP_Js, ASP_Vbs,
>>>>>> ASP.NET_Csharp, ASP.NET_VB, JSP,
PHP_MySQL, PHP_ADODB and HTML
>>>>>>
>>>>>> This first version provides basic
support for drag-drop insertion of
>>>>>> AIR aliases and codehints, I'm
planning to add more features in
>>>>>> future versions such as popping up
codeHints automatically after
>>>>>> inserting an Alias and Dialogs for
configuring the inserted code. I
>>>>>> would love to hear from you about
your Bugs, and feature requests.
>>>>>>
>>>>>> Note that the extension depends on
the codehints installed by the AIR
>>>>>> Extension for Dreamweaver Beta from
Adobe, if the codehints are not
>>>>>> available only the first level of
AIRAliases will be shown.
>>>>>>
>>>>>> regards
>>>>>>
>>>>>> Joris van Lier
>>>>>
>>>
>

New installed components not showing in components panel in cs4

Hi,
I'm currently reading the excellent book "ActionScript 3.0
Quick Reference Guide". In some chapters, the authors ask us to
install third-party components. They install well in the Extension
Manager CS4, but for a reason I don't know, they're not showing in
the Components panel...
I use Flash CS4... but I also have Flash 8 and Flash CS3
installed (in fact, all the suites) and it never caused problems
before, so I don't think that's the problem... By the way, if I
install them in CS3, they show up in the panel.
FYI, I have a French Canadian Windows XP version and I work
with English Flash versions...
Particularly, the extensions I tried are:
- as3webservice by Pieter Michels (wellconsidered.com);
- Yahoo! Astra Library (by Yahoo!, of course);
- Accordion Panel V3AS3 (by JumpeyeComponents).
Thank you.

Well, we're making progress...
No, there're not in that folder, but from what I understand,
they shouldn't be there either, because in that folder, it's the
place for the default ones (that comes with Flash).
The ones that we add are in the Documents and Settings
folder:
So, since I installed the same components in Flash CS3 and
Flash CS4 (because they weren't working in CS4), they appear in:
C:\Documents and Settings\Nelson Therrien\Local
Settings\Application Data\Adobe\Flash
CS3\en\Configuration\Components... Good.
Now, do they appear in Flash CS4 (path C:\Documents and
Settings\Nelson Therrien\Local Settings\Application
Data\Adobe\Flash CS4\en\Configuration\Components)... NO!!
BUT!! I don't know if it's because I tried the French version
once or because I have a French Operating System, but I also have a
fr folder (full path: C:\Documents and Settings\Nelson
Therrien\Local Settings\Application Data\Adobe\Flash
CS4\fr\Configuration\Components) and... THEY APPEAR THERE!!
So, I copied them from the fr folder to the en folder and
Voilà! They now appear inside the Flash CS4 Components
Panel...!
Thank you for pointing me in the right direction!
Nelson

Compiling with mxmlc Using CS3 Components

Hi, I would like to use the Flex SDK 3.0 to compile a project
which currently compiles successuflly in Flash CS3 (because it's
quicker). I am importing assets from swfs using [Embed ...] tags
without any problems. I can also use CS3 components by exporting
them to an SWC file, adding that to the library path for mxmlc and
then reating new instances of them in AS. However, I have some
assets which contain components which were statically placed within
them in the CS3 IDE and given an instance name. These are not
working. For example, the buttons I have typed as
fl.controls.Button in the AS code but I get a run time error saying
that it can't coerce a MovieClip instance into a Button. Does
anyone have any ideas? The CS3 compiler is driving me nuts because
it's so slow. I used to use MTASC and am looking for something
similar to work with AS 3.0.

I agree that compiler is painfully slow, especially when you use a library and have some (one is enough) projects dependendant upon it. Minor change in library starts compiling everything for a few minutes . This really slows development process in later stages. Adobe should do something about this.

I cannot install iTunes 10.5. Problem is that there are rest of installations. I uninstalled all iTunes, Quicktime, Bonjour, Apples components, but problem goes on. I run WIN XP SP 3 32 BITS. I accept ideas to solve, thanks.

I cannot install iTunes 10.5. Problem is that there are rest of installations. I uninstalled all iTunes, Quicktime, Bonjour, Apples components, but problem goes on. I run WIN XP SP 3 32 BITS. I accept ideas to solve, thanks.

A bit of repetition, mainly for the benefit of anyone else with the same issue. In your case the "for older video cards" version might be worth a try.
When cleaning folders you need to check both the Program Files and Program Files (x86) folders, which you may well have done but didn't mention in the detail above.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Mobile Device Support won't install normally.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Server Behavior, Bindings and Components Panels [subject edited by moderator]

How do I get Server Behavior, Bindings and Components Panels and Database feature this is the most retarded program ever! I installed the extension manager, then it wanted the panel installed, which won't installed because of photoshop version. How in the hell do I get Server Behavior, Bindings and Components Panels and Database feature!!!

The Deprecated Server Behaviors were removed for good reason. The code is woefully outdated and the old MySql connections won't work on servers with PHP 5.5 or higher.
Which operating system?
Which version of PS?
Which version of DW?
Which version of Extension Manager?
Replace Deprecated Server Behaviors with a modern commercial extension -- MySQLi (improved) or PDO:
http://www.webassist.com/dreamweaver-extensions/mysqli
http://www.dmxzone.com/go/22096/updated-replacing-dreamweaver-server-behaviors-with-dmxzon e-extensions/
Nancy O.

Where is the Components Panel and the Design Mode button in FlashBuilder 4.7 Premium?

I'm new to FlashBuilder. I've been using many years just Flash and now I'm switching to FlashBuilder. I've seen some tutorials, but the Interface in my copy of the program do not match the one in the tutorials. I could't find the componets Panel and the Design Mode button. Any ideea why?
My Laptop runs on Windows 7. FlashBuilder 4.7 Premium is via Creative Cloud:
SnapShot from Tutorials I've seen
SnapShot From my application
with yelow i've marked the place with the "Components View" and the "Design" mode button
whith that red line I've marked the place where the "Design" mode button is expected
I've notice the following menu:
Whe you click on Views: Window->Show Views->Other... an interactive dialog appears with the tree of views available. Above there is a textField where you can enter a filter. As you type the text, the tree updates accordingly, after each letter.
I've searched for the Components panel ... surprise!!!
nothing on filter
filtering for Outline View
filtering for Component View
the tree complete
the tree finds the Outline View
the tree is already empty
As you notice the list of views is empty even before I finish the spelling of the word "Component".
Is there something I should configure, or this feature is not available in this particular distribution ?

I found the answer myself. Looks like this new version does not support these features anymore: http://www.adobe.com/ro/products/flash-builder/buying-guide.html.
Strange...
The question rising here is what happens with this feature?
Will be available with a future update?
Will no longer be availalble in FlashBuilder, but in another Adobe Project?
Will never be available?
I belive this features are not important for advanced users... but I'm just learning this. I'm used to work in Flash. I write ActionScript, but I'm not familliar with the objects availlable in Flex, so the Component Panel and Design Mode is quite handy on this stage.
Plus, there is a real concern about the future of this technology, now beeing available HTML5. So, there is a question of oportunity investing time in learning things no longer supported. The most frustrating thing is not having an answer to this question. Even a "No" is better than "We don't know yet" <- the answer I received from online support.

DW CS3 site cache problem

I upgraded to CS3 with no problems except I now find that if
I attempt to delete a word of pdf file that I know is linked to an
htm page, DW no longer gives me a warning message. This means that
If I do a sync. any updated word or pdf files do not get uploaded
to the server. If I do re-create the site cache the files still do
not get "re-linked". Anybody got an idea what is going on? I have
an awful lot of pdfs and docs linked from my site.
Thanx in advance

I figured out if I drag the file window to the left it will
stay on the left. I thought
before in previous version when you select files to be on the
left the preferences menu they would go to the left. Problem
solved.
RazorTrak

I installed a mxp and it doesn't appear in components panel

Hi,
I have a new Mac Pro, an Adobe Master Suite and when I installed a mxp component it doesn't appears in components panel.
The Adobe Extension Manager is the latest too.
All is in engliish.
I installed also the Flex Component Kit and the same occurs.
Teoricly it is so simple.... just double click the mxp file and Adbe Extension Manager opens and register.
How can I fix it?

What book?
An ibook?
Or an audiobook?

Does the nb7.1 support using the javafx Components panel to design the ui?

does anyone knows whether the nb7.1 support using the javafx Components panel to design the ui? thanks

Hello guys, what kind of support would you like to see?
Code snippets in the palette?
Please answer here: What would you like to have in NetBeans 7.2 for JavaFX?

Cs3 align panel is showing no options how can i restore them?

cs3 align panel is showing no options how can i restore them?

Have you got more than one object selected? If so you might need to replace your preferences...

Components panel Dreamweaver CS6

I am not seeing any components in the components panel. I've tried creating a new one as well as finding the existing components. Any clue on how to get this to work? Is there a place to define the existing components directory path?

Moved from the Creative Cloud to the Dreamweaver forum. They will be able to help you here.

Dreamweaver cs3 - files panel

dreamweaver cs3 files panel I can only see manage sites
How do I go back to the defaut view

What you see IS the default view. The "manage sites" link opens the site manager, as does Sites>Manage Sites from the menu bar.
You can always go to Window>Workspace Layout>Resetxxx and reset your workspace. But the Files panel will be the same because it is set to the default ciew.

CS3 Components panel problem

Similar Messages

Maybe you are looking for