CS5 Rendering on a Nvidia GTX285 and Display on a Radeon
Hi,
I am trying to migrate to windows 7/64 and have used the Nvidia video processors for many years. I am currently using a GTX 285 with Premier Pro CS5 and the realtime rendering works exactly as advertised, it is truly phenomenal to see my effects immediately.
Unfortunately Nvidia has abandoned spanning the desktop accross two monitors, a feature that is built into ATI Radeon video cards. I would like to switch my displays over to a Radeon card and retain the Nvidia card in the system just for rendering.
Will CS5 still recognize the Nvidia card and use it for rendering?
Has any tried this configuration?
Any hints on how best to go about this?
Straight from the proverbial horse's mouth:
ManuelG
View Member Profile
Add as Friend
Send Message
Add to PM block list
Forward PM
Find Member's Topics
Find Member's Posts
Re:horizontal spanning, again, Today, 01:55 PM
Group: NVIDIA Technical Support
Posts: 1,333
Member No.: 194,471
Joined: 25-September 09
QUOTE
Hi Manuel,
Please answer this time. I am going to replace my entire system, because my mother board does not support SLI.
I need to know from you exactly what cards in SLI configuration support horizontal spanning under windows 7.
I do not need brands, just the gpu's
Please answer
Gerard
There is no horizontal span support for any of our graphics cards under Windows 7, either Quadro or Geforce. We do have a feature called NVIDIA Surround which is like Horizontal Span but requires 3 monitors. It will not work across two monitors only. Also, all three monitors are required to run at the same screen resolution, refresh rate and sync polarity.
Since you are building a new system, any of the 400 series supports GPUs will support 2D NVIDIA Surround. For more information, you can visit the system requirements page at:
http://www.nvidia.com/object/3dv-system-re...technology.html
Horizontal Span is only supported at this time under Windows XP.
NVIDIA Forums Technical Advisor
NVIDIA Software Downloads - http://www.nvidia.com/Download/index.aspx?lang=en-us
NVIDIA Knowledge Base - http://nvidia.custhelp.com/cgi-bin/nvidia....ser/std_alp.php
NVIDIA nZone Entusiast Website - http://www.nzone.com
NVIDIA SLI Zone - http://www.slizone.com
Twitter - http://twitter.com/nvidiacc
Similar Messages
-
I'm in the market for a Laptop MAC solution to GPU accelerated editing. Because of multi-client workflow needs, I need to edit HD video with both FCP-X and ADOBE CS5.5 Premiere. The only GPU capable Graphics Cards that seem to satisfy both "camps" are from NVIDIA - GTX285 and NVIDIA Quadro FX 4800
Does anyone have these cards AND using both softwares AND having success at it?
I sure would appreciate any experienced advice with using NVIDIA GPU accelration with MacBook Pro especially!
Thanks,
~mars9How do you plan on using a PCIe card with a laptop? Via a Thunderbolt PCIe adapter? I can't help with that. In fact, I didn't think those adapters were even out yet.
I do have a Mac Pro and I use the NVDIA Quadro 4000 For Mac. This works great for Premiere Pro. As good as the 4800 and for less money. Check out this comparison.
http://barefeats.com/wst10g11.html -
Dreamweaver 8 Display Mode renders website differently from IE7 and Firefox2
I'm trying to create a webpage with the following rows setup:
Header
Navigation/Issueinfo (2-column)
Left/Middle/Right (3-column)
OtherLeft/OtherRight (2-column)
Footer
It renders correctly in Dreamweaver 8's display window, but in IE7 and Firefox 2 the Navigation/Issueinfo row renders differently, and I can't figure out what the problem is. I've attached images of D8 and IE7 as well as the HTML and CSS codes. All help is greatly appreciated!
Dreamweaver 8's Display View: http://img28.imageshack.us/i/70399536.jpg/
Internet Explorer 7: http://img3.imageshack.us/i/ie7e.jpg/
HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
<link href="style.css" rel="stylesheet" type="text/css" />
<link rel="icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<div id="container">
<div id="header">
</div>
<div id="navigation">
<ul>
<li><a href="index.html">HOME</a></li>
<li><a href="archive.html">ARCHIVE</a></li>
<li><a href="blogs.html">BLOGS</a></li>
<li><a href="calendar.html">CALENDAR</a></li>
<li><a href="staff/staff.html">STAFF</a></li>
<li><a href="msms/msms.html/">MSMS</a></li>
</ul>
</div>
<div id="issueinfo">
VOLUME 21 ISSUE 3
</div>
<div id="left">
Left side text...
</div>
<div id="right">
Right side text...
</div>
<div id="middle">
Middle column text...
</div>
<div id="otherleft">
Otherleft text...
</div>
<div id="otheright">
Otherright text...
</div>
<div id="footer">Footer...</div>
</div>
</body>
</html>
CSS:
/* CSS Document */
/* Specify blanket rules for all elements */
body {
color:#000000;
font-family:Arial, Helvetica, sans-serif;
font-size:12px;
margin:0px;
padding:0px;
background-color:#000077;
a{
color:#000077;
text-decoration:none;
a:hover{
text-decoration:underline;
#container {
width:1020px;
margin:0px auto 0px auto;
background-color:#FFFFFF;
#header {
clear:both;
width:1020px;
height:130px;
background-image:url(images/banner.jpg);
#navigation {
float:left;
width:800px;
text-align:center;
background-color:#000077;
#navigation li{
display:inline;
list-style-type:none;
padding-right:30px;
#navigation a{
color:#FFFFFF;
text-transform:capitalize;
#issueinfo {
clear:right;
color:#FFFFFF;
text-transform:capitalize;
text-align:center;
margin:0px 0px 0px 800px;
background-color:#000077;
#left {
clear:left;
float:left;
width:318px;
padding:0px 10px 0px 10px;
#right {
float:right;
width:318px;
padding:0px 10px 0px 10px;
#middle {
margin:0px 340px 0px 340px;
padding:0px 10px 0px 10px;
#otherleft {
float:left;
width:510px;
#otherright {
margin:0px 0px 0px 510px;
#footer {
clear:both;
color: #FFFFFF;
text-align: center;
background-color: #000077;DW Design View is only an approximation of what various browsers will do.
Try this (note changes in red): Tested in FF 3.6.
#navigation {
float:left;
width:800px;
text-align:center;
background-color:#000077;
line-height: 2em; /**ADD THIS**/
#issueinfo {
clear:right; /**REMOVE THIS**/
color:#FFFFFF;
text-transform:capitalize;
text-align:center;
margin:0px 0px 0px 800px;
background-color:#000077;
line-height: 4em; /**ADD THIS**/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/ -
I am having an issue with MBL (CS5 version) . I get a "Not Responding" message when I open the EDIT section of the plugin. The screen turns black then white then the message.
I have contaced Red Giant and they say:
Update for Case # 16565
Hello Craig,
We currently have a compatibility issue with the latest Nvidia Driver. Can you try reverting to an older version of the Nvidia driver and let me know if this resolves your issue?
Thanks,
-Nate
Would you do this in a system that is working perfectly otherwise? (WIn 7, Quadro FX3800 etc...)
Can anyone let me know what version of the NVIDIA driver they are using please. How do I know what is current and what to roll back to?
RDA - I have sent you a PM because I know it works for you as tested yesterday.I don't mind you posting my PMs for the common good.
Now, regarding the nvidia drivers for the Quadro cards, version 266.35 was available fro download until yesterday or early today when it was replaced by version 266.45 which broke MBL on my machine as explained in my PM.
Once I removed the HD audio driver, which is part of the nvidia package, MBL was working again.
Here is what I suggest you should do :
1. Download and install the 266.45 drivers.
2. Remove the nvidia HD Audio driver in the "Uninstall or change a program" panel..
3. Launch PPro and apply a MBL effect to a clip and see if my solution works for you.
Good luck (nod to Bill)
Robert -
Rendering stops and display an error
Did anyone have this: Render stops and displays that the file is used by another application. Than I will render again and after a while it displays the same message again.
And what is the solution?
Thanks.We seemed to have figured out our render error at work. It was caused by the way the IT guys set up or machines to connect to our XServe. Our machines were trying to mount several volumes from the server automatically on login but we (the editors) didn't have access to those folders so we canceled the connection and for some reason it caused a couple of probelms with our software. Once the IT guys disabled the auto-login everything was fine. Not sure if your render problems were from the same cause.
-
Calculating and displaying the Length of the side of a triangle
Hi everyone. I am currently working on Dragging and Stretching a triangle on screen. Ive got it working to a certain extent but the only problem is that whenever I go to the point from which i have to drag my triangle i.e. the Left hand Corner of the BAse at exactly 300,300 it redraws a new triangle below the existing one and then when i stretch it from the top and the right it leaves a trail of triangles everytime. But when i resize my window it clears the trail only to start agian when I drag or stretch it...
All my code for wahtever I have done is displayed below. I would appreciate all the help that any one can offer.
Secondly , as I stretch my triangle I would like to calculate My Length of the hypotenuse and the other 2 sides as they change and display it in System.out.println for now...
PLEASE HELP
the code is
This is my Main Form --- Interactive Geometry.java
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.event.MouseEvent;
import java.awt.event.MouseMotionListener;
import javax.swing.JFrame;
* InteractiveGeometry.java
* Created on 30 November 2004, 20:29
* @author Kripa Bhojwani
public class InteractiveGeometry extends javax.swing.JFrame {
public EastPanel eastpanel;
public Container container;
public GeomPanel gp;
public boolean pressed = false;
public boolean pressT = false;
public boolean pressR = false;
/** Creates new form InteractiveGeometry */
public InteractiveGeometry() {
initComponents();
eastpanel = new EastPanel();
container = new Container();
Model model = new Model(300,150,450,300,300,300);
gp = new GeomPanel(model);
container = getContentPane();
container.add(eastpanel,BorderLayout.EAST);
container.add(gp,BorderLayout.CENTER);
setSize(1400,9950);
gp.addMouseMotionListener(
new MouseMotionListener() { //anonymous inner class
//handle mouse drag event
public void mouseDragged(MouseEvent me) {
setTitle("Dragging: x=" + me.getX() + "; y=" + me.getY());
public void mouseMoved(MouseEvent me) {
setTitle("Moving: x=" + me.getX() + "; y=" + me.getY());
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
jMenuBar2 = new javax.swing.JMenuBar();
jMenu2 = new javax.swing.JMenu();
jMenuItem1 = new javax.swing.JMenuItem();
jMenu1 = new javax.swing.JMenu();
jMenuItem2 = new javax.swing.JMenuItem();
addMouseMotionListener(new java.awt.event.MouseMotionAdapter() {
public void mouseDragged(java.awt.event.MouseEvent evt) {
formMouseDragged(evt);
public void mouseMoved(java.awt.event.MouseEvent evt) {
formMouseMoved(evt);
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
exitForm(evt);
jMenuBar2.setBackground(new java.awt.Color(0, 102, 204));
jMenu2.setBackground(new java.awt.Color(222, 222, 238));
jMenu2.setText("File");
jMenu2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jMenu2ActionPerformed(evt);
jMenuItem1.setBackground(new java.awt.Color(204, 255, 255));
jMenuItem1.setText("Exit");
jMenuItem1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jMenuItem1ActionPerformed(evt);
jMenu2.add(jMenuItem1);
jMenuBar2.add(jMenu2);
jMenu1.setBackground(new java.awt.Color(199, 215, 255));
jMenu1.setText("Theorem ");
jMenuItem2.setText("Pythagoras Theorem");
jMenuItem2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jMenuItem2ActionPerformed(evt);
jMenu1.add(jMenuItem2);
jMenuBar2.add(jMenu1);
setJMenuBar(jMenuBar2);
pack();
private void jMenuItem2ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void formMouseDragged(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
private void formMouseMoved(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
public void mouseDragged(MouseEvent me) {
setTitle("Dragging: x=" + me.getX() + "; y=" + me.getY());
private void jMenu2ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void jMenuItem1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
System.exit(0);
/** Exit the Application */
private void exitForm(java.awt.event.WindowEvent evt) {
System.exit(0);
* @param args the command line arguments
public static void main(String args[]) {
InteractiveGeometry ig = new InteractiveGeometry();
ig.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
ig.show();
// new InteractiveGeometry().show();
// Variables declaration - do not modify
private javax.swing.JMenu jMenu1;
private javax.swing.JMenu jMenu2;
private javax.swing.JMenuBar jMenuBar2;
private javax.swing.JMenuItem jMenuItem1;
private javax.swing.JMenuItem jMenuItem2;
// End of variables declaration
This is my Panel -- GeomPanel.java which draws everything -- /*
* GeomPanel.java
* Created on 30 November 2004, 20:29
import java.awt.*;
import java.util.*;
import javax.swing.*;
import java.awt.Graphics.*;
import java.awt.event.MouseListener;
import java.awt.event.MouseMotionListener;
import java.awt.geom.Line2D;
import java.awt.geom.Point2D;
import java.awt.event.*;
import java.awt.Graphics2D;
import java.awt.geom.Ellipse2D;
import javax.swing.event.TableModelListener;
import javax.swing.JScrollPane;
import javax.swing.event.*;
import java.awt.Dimension;
import java.awt.Container.*;
* @author Kripa Bhojwani
public class GeomPanel extends javax.swing.JPanel implements Observer, MouseMotionListener, MouseListener {
private Model model;
private boolean pressed = false;
private boolean pressT = false;
private boolean pressR = false;
/** Creates new form GeomPanel */
public GeomPanel(Model model) {
this.model = model;
model.addObserver(this);
addMouseListener(this);
addMouseMotionListener(this);
initComponents();
setBackground(Color.getHSBColor(6,600,660));
public void paintComponent(Graphics gfx) {
Graphics2D g = (Graphics2D) gfx;
Point tc = model.getTop();
Point lc = model.getLeft();
Point rc = model.getRight();
Point2D.Double p1 = new Point2D.Double(tc.getX(),tc.getY());
Point2D.Double p2 = new Point2D.Double(lc.getX(),lc.getY());
Point2D.Double p3 = new Point2D.Double(rc.getX(),rc.getY());
Line2D.Double line = new Line2D.Double(p1, p2);
Line2D.Double line1 = new Line2D.Double(p2, p3);
Line2D.Double line2 = new Line2D.Double(p1, p3);
g.setColor(Color.BLACK);
g.draw(line);
g.draw(line2);
g.draw(line1);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
setLayout(new java.awt.BorderLayout());
addMouseMotionListener(new java.awt.event.MouseMotionAdapter() {
public void mouseDragged(java.awt.event.MouseEvent evt) {
formMouseDragged(evt);
private void formMouseDragged(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
public void mouseClicked(MouseEvent e) {
public void mouseDragged(MouseEvent e) {
System.out.println("Dragged at "+ e.getX()+ "," + e.getY());
if(pressed == true){
model.setLeft(e.getX() , e.getY());
else if(pressT == true){
model.setTop(e.getX() , e.getY());
else if (pressR == true){
model.setRight(e.getX(), e.getY());
else{
pressed = false;
pressT= false;
pressR=false;
repaint();
public void mouseEntered(MouseEvent e) {
public void mouseExited(MouseEvent e) {
public void mouseMoved(MouseEvent e) {
System.out.println("Mouse at " + e.getX() +"," + e.getY());
public void mousePressed(MouseEvent e) {
if (model.getLeft().getX()== e.getX() && model.getLeft().getY()== e.getY()){
pressed = true;
else if (model.getTop().getX()==e.getX() && model.getTop().getY()==e.getY()){
pressT = true;
else if(model.getRight().getX() == e.getX() && model.getRight().getY()==e.getY()){
pressR = true;
// else if(model.getCircle().getX() == e.getX() && model.getCircle().getY() == e.getY()){
// inoval = true;
else {
pressed =false;
pressT = false;
pressR = false;
} repaint();
public void mouseReleased(MouseEvent e) {
if(pressed == true){
model.setLeft(e.getX(),e.getY());
else if (pressT ==true ){
model.setTop(e.getX(), e.getY());
else if(pressR ==true){
model.setRight(e.getX(),e.getY());
else {
pressed = false;
pressT = false;
pressR = false;
repaint();
public void update(Observable o, Object arg) {
repaint();
// Variables declaration - do not modify
// End of variables declaration
This is my Model class called Model.java which Holds all teh data for my triangle
import java.awt.Point;
import java.util.Observable;
* Model.java
* Created on 05 December 2004, 14:11
* @author Kripa Bhojwani
public class Model extends Observable{
private int x1,x2,x3, y1,y2,y3;
private int _transx;
private int _transy;
private int _c;
private int _d;
/** Creates a new instance of Model */
public Model(int x1, int y1, int x2, int y2, int x3, int y3) {
this.x1 = x1;
this.y1 = y1;
this.x2 = x2;
this.y2 = y2;
this.x3 = x3;
this.y3 = y3;
setChanged();
notifyObservers();
public void setTop(int x1, int y1){
//this.x1 =x1;
this.y1= y1;
setChanged();
notifyObservers();
public void setRight(int x2, int y2){
this.x2 = x2;
// this.y2 =y2;
setChanged();
notifyObservers();
public void setLeft(int x3, int y3){
_transx = x3 - this.x3;
_transy = y3 - this.y3;
this.x3 += _transx;
this.y3 += _transy;
this.y2 += _transy;
this.x2 += _transx;
this.x1 += _transx;
this.y1 += _transy;
setChanged();
notifyObservers();
public Point getTop(){
Point p = new Point(x1,y1);
return p;
public Point getRight(){
Point p1 = new Point(x2,y2);
return p1;
public Point getLeft(){
Point p3 = new Point(x3,y3);
return p3;
public void update() {
setChanged();
notifyObservers();
This is my TableModel which is the JTable to display all the Cordinates and Lengths and other Measurements like angles etc./*
* TableModel.java
* Created on 03 December 2004, 15:08
import javax.swing.JTable;
import javax.swing.JScrollPane;
import javax.swing.JPanel;
import javax.swing.JFrame;
import java.awt.*;
import java.awt.event.*;
import java.util.Observer;
import javax.swing.event.TableModelEvent;
import javax.swing.table.AbstractTableModel;
* @author Kripa Bhojwani
public class TableModel extends AbstractTableModel implements Observer{
private String[] columnNames = {"Point", "X Coordinate", "Y Coordinate"};
private Object[][] data = {};
private int rowCount;
private int columnCount;
/** Creates a new instance of TableModel */
public TableModel() {
rowCount = 0;
columnCount = 3;
public int getColumnCount() {
return columnCount;
public int getRowCount() {
return rowCount;
public String getColumnName(int col) {
return columnNames[col];
public void setColumnName (String[] name){
columnNames = name;
public void setValueAt(Object obj, int row, int col) {
data[row][col] = obj;
fireTableCellUpdated(row, col);
TableModelEvent tme = new TableModelEvent(this);
fireTableChanged(tme);
public Object getValueAt(int row, int col) {
return data[row][col];
public void update(java.util.Observable o, Object arg) {
This is the Panel on the east side of My Main application form which will display all the measurements and Cordinates ---EastPanel.java
import java.awt.BorderLayout;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.TableModelListener;
import java.awt.Dimension;
* EastPanel.java
* Created on 04 December 2004, 23:07
* @author Kripa Bhojwani
public class EastPanel extends javax.swing.JPanel implements TableModelListener{
private TableModel tm;
/** Creates new form EastPanel */
public EastPanel() {
initComponents();
tm = new TableModel();
JTable table1 = new JTable(tm);
table1.setPreferredScrollableViewportSize(new Dimension(250,264));
table1.getModel().addTableModelListener(this);
JScrollPane sp = new JScrollPane(table1);
add(sp,BorderLayout.EAST);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
setLayout(new java.awt.BorderLayout());
public void tableChanged(javax.swing.event.TableModelEvent e) {
// Variables declaration - do not modify
// End of variables declaration
}import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.text.NumberFormat;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.DefaultTableCellRenderer;
public class G
public G()
TriangleModel tri = new
ri = new TriangleModel(175,100,175,250,325,250);
TriangleView view = new TriangleView(tri);
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(view.getUIPanel(),
Panel(), "North");
f.getContentPane().add(view);
f.getContentPane().add(view.getTablePanel(),
Panel(), "South");
f.setSize(500,500);
f.setLocation(200,200);
f.setVisible(true);
public static void main(String[] args)
new G();
class TriangleModel // (x1,
y1)
{ // |\
static final int SIDES = 3; // | \
private int cx, cy; // |
| \
Polygon triangle; // |_
|_ _\ (x3, y3)
int selectedIndex; // (x2,
(x2, y2)
NumberFormat nf;
Line2D[] medians;
Point2D centroid;
public TriangleModel(int x1, int y1, int x2, int
int y2, int x3, int y3)
int[] x = new int[] { x1, x2, x3 };
int[] y = new int[] { y1, y2, y3 };
triangle = new Polygon(x, y, SIDES);
nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(1);
public boolean contains(Point p)
// Polygon.contains doesn't work well enough
return (new Area(triangle)).contains(p);
public boolean isLineSelected(Rectangle r)
Line2D line = new Line2D.Double();
for(int j = 0; j < SIDES; j++)
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
int x1 = x[j];
int y1 = y[j];
int x2 = x[(j + 1) % SIDES];
int y2 = y[(j + 1) % SIDES];
line.setLine(x1, y1, x2, y2);
if(line.intersects(r))
selectedIndex = j;
return true;
selectedIndex = -1;
return false;
* Only works for right triangle with right angle
angle at (x2, y2)
public void moveSide(int dx, int dy, Point p)
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
switch(selectedIndex)
case 0:
x[0] += dx;
x[1] += dx;
break;
case 1:
y[1] += dy;
y[2] += dy;
break;
case 2:
double rise = y[2] - y[0];
double run = x[2] - x[0];
double slope = rise/run;
// rise / run == (y[2] - p.y) / (x[2]
] - p.y) / (x[2] - p.x)
x[2] = p.x + (int)((y[2] - p.y) /
)((y[2] - p.y) / slope);
// rise / run == (p.y - y[0]) / (p.x
y - y[0]) / (p.x - x[0])
y[0] = p.y - (int)((p.x - x[0]) *
)((p.x - x[0]) * slope);
public void translate(int dx, int dy)
triangle.translate(dx, dy);
public Polygon getTriangle()
return triangle;
public String findCentroid()
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
// construct the medians defined as the line
the line from
// any vertex to the midpoint of the opposite
opposite line
medians = new Line2D[x.length];
for(int j = 0; j < x.length; j++)
int next = (j + 1) % x.length;
int last = (j + 2) % x.length;
Point2D vertex = new Point2D.Double(x[j],
Double(x[j], y[j]);
// get midpoint of line opposite vertex
double dx = ((double)x[last] -
le)x[last] - x[next])/2;
double dy = ((double)y[last] -
le)y[last] - y[next])/2;
Point2D oppLineCenter = new
Center = new Point2D.Double(x[next] + dx,
y[next]
y[next] + dy);
medians[j] = new Line2D.Double(vertex,
uble(vertex, oppLineCenter);
// centroid is located on any median 2/3 the
2/3 the way from the
// vertex (P1) to the midpoint (P2) on the
) on the opposite side
double[] lengths = getSideLengths();
double dx = (medians[0].getX2() -
etX2() - medians[0].getX1())*2/3;
double dy = (medians[0].getY2() -
etY2() - medians[0].getY1())*2/3;
double px = medians[0].getX1() + dx;
double py = medians[0].getY1() + dy;
//System.out.println("px = " + nf.format(px)
rmat(px) +
// "\tpy = " +
py = " + nf.format(py));
centroid = new Point2D.Double(px, py);
return "(" + nf.format(px) + ", " +
", " + nf.format(py) + ")";
public String[] getAngles()
double[] lengths = getSideLengths();
String[] vertices = new
es = new String[lengths.length];
for(int j = 0; j < lengths.length; j++)
int opp = (j + 1) % lengths.length;
int last = (j + 2) % lengths.length;
double top = lengths[j] * lengths[j] +
lengths[last] *
lengths[last] * lengths[last] -
lengths[opp] *
lengths[opp] * lengths[opp];
double divisor = 2 * lengths[j] *
lengths[j] * lengths[last];
double vertex = Math.acos(top /
h.acos(top / divisor);
vertices[j] =
ertices[j] = nf.format(Math.toDegrees(vertex));
return vertices;
public String[] getLengths()
double[] lengths = getSideLengths();
String[] lengthStrs = new
rs = new String[lengths.length];
for(int j = 0; j < lengthStrs.length; j++)
lengthStrs[j] = nf.format(lengths[j]);
return lengthStrs;
public String[] getSquares()
double[] lengths = getSideLengths();
String[] squareStrs = new
rs = new String[lengths.length];
for(int j = 0; j < squareStrs.length; j++)
squareStrs[j] = nf.format(lengths[j] *
lengths[j] * lengths[j]);
return squareStrs;
private double[] getSideLengths()
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
double[] lengths = new double[SIDES];
for(int j = 0; j < SIDES; j++)
int next = (j + 1) % SIDES;
lengths[j] = Point.distance(x[j], y[j],
(x[j], y[j], x[next], y[next]);
return lengths;
class TriangleView extends JPanel
private TriangleModel model;
private Polygon triangle;
private JTable table;
private JLabel centroidLabel;
private boolean showConstruction;
TriangleControl control;
public TriangleView(TriangleModel model)
this.model = model;
triangle = model.getTriangle();
showConstruction = false;
control = new TriangleControl(this);
addMouseListener(control);
addMouseMotionListener(control);
public void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.draw(triangle);
if(model.medians == null)
centroidLabel.setText("centroid location:
id location: " + model.findCentroid());
// draw medians and centroid point
if(showConstruction && !control.dragging)
g2.setPaint(Color.red);
for(int j = 0; j < 3; j++)
g2.draw(model.medians[j]);
g2.setPaint(Color.blue);
g2.fill(new
g2.fill(new Ellipse2D.Double(model.centroid.getX() -
2,
model.centroid.getY()
model.centroid.getY() - 2, 4, 4));
public TriangleModel getModel()
return model;
public JTable getTable()
return table;
public JLabel getCentroidLabel()
return centroidLabel;
public JPanel getUIPanel()
JCheckBox showCon = new JCheckBox("show
ox("show construction");
showCon.addActionListener(new
ener(new ActionListener()
public void actionPerformed(ActionEvent
(ActionEvent e)
boolean state =
boolean state =
((JCheckBox)e.getSource()).isSelected();
showConstruction = state;
repaint();
JPanel panel = new JPanel();
panel.add(showCon);
return panel;
public JPanel getTablePanel()
String[] headers = new String[] { "", "", "",
// row and column data labels
String[] rowHeaders = {
"sides", "lengths", "squares", "angles",
", "angles", "degrees"
String[] sidesRow = { "vertical",
rtical", "horizontal", "hypotenuse" };
String[] anglesRow = { "hyp to ver", "ver to
"ver to hor", "hor to hyp" };
// collect data from model
String[] angles = model.getAngles();
String[] lengths = model.getLengths();
String[] squares = model.getSquares();
String[][] allData = { sidesRow, lengths,
lengths, squares, anglesRow, angles };
int rows = 5;
int cols = 4;
Object[][] data = new Object[rows][cols];
for(int row = 0; row < rows; row++)
data[row][0] = rowHeaders[row];
for(int col = 1; col < cols; col++)
data[row][col] = allData[row][col -
lData[row][col - 1];
table = new JTable(data, headers)
public boolean isCellEditable(int row,
ble(int row, int col)
return false;
DefaultTableCellRenderer renderer =
(DefaultTableCellRenderer)table.getDefaultRenderer(St
ring.class);
renderer.setHorizontalAlignment(JLabel.CENTER);
centroidLabel = new JLabel("centroid
centroid location: ", JLabel.CENTER);
Dimension d =
sion d = centroidLabel.getPreferredSize();
d.height = table.getRowHeight();
centroidLabel.setPreferredSize(d);
JPanel panel = new JPanel(new
anel(new BorderLayout());
panel.setBorder(BorderFactory.createTitledBorder("tri
angle data"));
panel.add(table);
panel.add(centroidLabel, "South");
return panel;
class TriangleControl extends MouseInputAdapter
TriangleView view;
TriangleModel model;
Point start;
boolean dragging, altering;
Rectangle lineLens; // used for line
line selection
public TriangleControl(TriangleView tv)
view = tv;
model = view.getModel();
dragging = altering = false;
lineLens = new Rectangle(0, 0, 6, 6);
public void mousePressed(MouseEvent e)
Point p = e.getPoint();
lineLens.setLocation(p.x - 3, p.y - 3);
// are we over a line
if(model.isLineSelected(lineLens))
start = p;
altering = true;
// or are we within the triangle
else if(model.contains(p))
start = p;
dragging = true;
public void mouseReleased(MouseEvent e)
altering = false;
dragging = false;
view.getCentroidLabel().setText("centroid
centroid location: " +
model.findCentroid());
view.repaint(); // for the construction
truction lines
public void mouseDragged(MouseEvent e)
Point p = e.getPoint();
if(altering)
int x = p.x - start.x;
int y = p.y - start.y;
model.moveSide(x, y, p);
updateTable();
view.repaint();
start = p;
else if(dragging)
int x = p.x - start.x;
int y = p.y - start.y;
model.translate(x, y);
view.repaint();
start = p;
private void updateTable()
String[] lengths = model.getLengths();
String[] squares = model.getSquares();
String[] angles = model.getAngles();
JTable table = view.getTable();
for(int j = 0; j < angles.length; j++)
table.setValueAt(lengths[j], 1, j + 1);
table.setValueAt(squares[j], 2, j + 1);
table.setValueAt(angles[j], 4, j + 1);
view.getCentroidLabel().setText("centroid
centroid location: " +
model.findCentroid());
Hey sorry mate.. ive got a nother problem.
I need to add loads of theorems to this tool. so i need a JMenu Bar called File with all the normal things. then another Menu called Theorems where i can have a list of JMenuItems with the theorem names --- Like when they click on Pythagoras Theorem it opens up all the triangle and the traingle data that u helped me with.
The thing is im using netbeans and in netbeans i can do it coz its there and all you got to do is put the components together.
Please Help
Thanks...
Sharan -
Xorg.conf , nvidia 96xx and dual head failure
i cant get Xorg to work with nvidia driver at all.
here is where i am.
setup aurch linux [X]
setup xserver with NV driver 1 head[X]
setup dual head[]
ok so i cant even get nvidia drivers to work or dual head on the NV driver.
i dont have an xorg.conf setup but i have tried the xorg.conf from my fedora setup but it just black screened.
here is my error log.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux mypc 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 24 03:43:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Device0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0622:1462:1270 nVidia Corporation G94 [GeForce 9600 GT] rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000d800/128, BIOS @ 0x????????/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 16:13:29 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:54:58 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Ive tried everything i could think of or what arch wiki could. I came to aurch linux to learn more about linux (fedora holds your hand to much.) but i dont think i can figure this one out on my own.serverman,
let me see if I understand your situation.
You are using the nvidia drivers and want to setup a dual screen with independent screens (?).
Without a xorg.conf one screen should work out of the box with one screen.
For the proprietary drivers you will need a minimal xorg.conf:
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
DefaultDepth 24
EndSection
This still has only one screen, but can you try it and tell what happens ?
Mektub -
Mac Pro Nvidia 8800GT and snow leopard 10.6.4 problems
I have a Mac pro 1.1 with a Nvidia 8800GT and I have having a lot of problems since update to snow leopard latest release. My computer start to show lines and giggle with lines static and then freeze, it make so bad that you can't do anything even restart the computer does not solve the problem. I have reset the pram and all possible solution available. Maybe the video card is going to die soon?
My MacPro 3.1 with Nvidia 8800 Gt is also not HP.
Initially I was getting some video glitches just after start up but then the machine would settle down and run for the session.
about a week ago the situation got increasingly worse so that from last Sat morning its will not even boot up 4 times out of 5 tries.
Gets to the apple symbol then freezes
I've tried booting from the snow leopard install disc but even then its freezes and I see many video artifacts.
I've ordered a ATi Radeon 4870 to replace the graphics card as I thought that might be the issue. The 8800 GT was full of fluff I feared it had cooked itself this summer.
But now I'm concerned from reading several forum topics that a recent OSX update has effectively killed machines with the 8800 Gt card.
I can't really operate fully without my macpro as that where most of the software is held. CS5 master suite etc
My business partner did say just get another machine but i'm not happy to go down that route just yet. Yes of course a 12 core is tempting but at ££££.££ cost.
lucky I have my Macbook pro to use otehrwise i'd be -
Store and Display Image from Database
Now that MySQL is working (woo hoo!) with JSC, I have a couple of questions for any experts out there...
1. How would I perform an image or other file upload from a browser?
2. How would I retrieve and display an image from a db on a jsp page?
Thanks for any help.Craig, I think I have a simpler way to load an image on the page, although for the time being I'm not retrieving from a database, but from the file system. The problem is that I'm not getting the pages to load continuously with new images. At some point it apears that the session gets clogges and can not load new pictures. I'll try to include the page bean code just below. This time I'm not adding the "code" tags because I haven't being successful with that. If you have problems , please, contact me at [email protected].
The core of the code is in a couple of button_action methods.
If you need, I can give access to the http server where this is running.
Luiz
package untitled;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import com.sun.jsfcl.std.*;
import javax.faces.component.*;
import javax.swing.filechooser.*;
import javax.swing.*;
import java.io.*;
* Creator-managed class.
* Your code should be placed at the end.
public class Page1 extends AbstractPageBean {
private HtmlForm form1 = new HtmlForm();
private FileSystemView filesystem = FileSystemView.getFileSystemView();
private File path = new File("C:/Documents and Settings/Luiz Costa/My Documents/Creator/Projects/PictureAlbum/build/images/Isadora\'s Wedding");
private File[] fileslist = filesystem.getFiles(path, false);
private int counter = 1;
private int iw = 0;
private int ih = 0;
private Integer aiw = new Integer("1");
private float aar = 0;
private float ar = 0;
private ImageIcon ii = null;
public HtmlForm getForm1() {
return form1;
public void setForm1(HtmlForm hf) {
this.form1 = hf;
private HtmlGraphicImage image1 = new HtmlGraphicImage();
public HtmlGraphicImage getImage1() {
return image1;
public void setImage1(HtmlGraphicImage hgi) {
this.image1 = hgi;
private HtmlCommandButton button1 = new HtmlCommandButton();
public HtmlCommandButton getButton1() {
return button1;
public void setButton1(HtmlCommandButton hcb) {
this.button1 = hcb;
private HtmlCommandButton button2 = new HtmlCommandButton();
public HtmlCommandButton getButton2() {
return button2;
public void setButton2(HtmlCommandButton hcb) {
this.button2 = hcb;
private HtmlGraphicImage image2 = new HtmlGraphicImage();
public HtmlGraphicImage getImage2() {
return image2;
public void setImage2(HtmlGraphicImage hgi) {
this.image2 = hgi;
private HtmlOutputText outputText1 = new HtmlOutputText();
public HtmlOutputText getOutputText1() {
return outputText1;
public void setOutputText1(HtmlOutputText hot) {
this.outputText1 = hot;
* This constructor contains Creator-managed initialization code.
* Your initialization code can be placed at the end,
* but, this code will be invoked only the first time the page is rendered,
* and any properties set in the .jsp file will override settings here.
public Page1() {
// Creator-managed initialization code
try {
catch ( Exception e) {
log("Page1 Initialization Failure", e);
throw new FacesException(e);
// User provided initialization code
public String button1_action() {
// Add your event code here...
outputText1.setValue(fileslist[counter].getAbsoluteFile().getPath()+fileslist.length+"left"+counter);
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image1.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image1.setHeight(""+(int)aar);
outputText1.setValue(image1.getHeight());
image1.setUrl("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image2.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image2.setHeight(""+(int)aar);
outputText1.setValue(image2.getHeight());
image2.setUrl("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
counter = (counter-1+fileslist.length) % fileslist.length;
return null;
public String button2_action() {
// Add your event code here...
outputText1.setValue(fileslist[counter].getAbsoluteFile().getPath()+fileslist.length+"right"+counter);
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image1.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image1.setHeight(""+(int)aar);
outputText1.setValue(image1.getHeight());
image1.setUrl("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image2.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image2.setHeight(""+(int)aar);
outputText1.setValue(image2.getHeight());
image2.setUrl("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
counter = (counter+1+fileslist.length) % fileslist.length;
return null;
} -
Revision: 13988
Revision: 13988
Author: [email protected]
Date: 2010-02-05 00:24:52 -0800 (Fri, 05 Feb 2010)
Log Message:
PARB feedback: change mediaWidth and mediaHeight properties on layout renderer related classes to measuredWidth, and measuredHeight.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/composition/CompositeDisplayObjectTrait.as
osmf/trunk/framework/OSMF/org/osmf/containers/MediaContainer.as
osmf/trunk/framework/OSMF/org/osmf/display/MediaContainerGroup.as
osmf/trunk/framework/OSMF/org/osmf/layout/DefaultLayoutRenderer.as
osmf/trunk/framework/OSMF/org/osmf/layout/ILayoutTarget.as
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.as
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutTargetSprite.as
osmf/trunk/framework/OSMF/org/osmf/layout/MediaElementLayoutTarget.as
osmf/trunk/framework/OSMFTest/org/osmf/display/TestMediaContainerGroup.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestDefaultLayoutRenderer.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestLayoutRenderer.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestMediaElementLayoutTarget.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TesterLayoutTargetSprite.asHi Lucas,
We don't recommend making layout renderers for each item that needs to be laid out. In fact you shouldn't be creating layout renderers at all (they are created automatically by the MediaContainer). The best way to layout Media is to add LayoutMetadata to the MediaElements. If you want to integrate layout into your controls, which aren't MediaElements, I wouldn't suggest you place them manually on the stage, and do you yourself. If you absolutely need to use the OSMF layout system, I would recommend creating a MediaElement to wrap your controls, and then give the wrapper the layout metadata you need. The easiest approach though, is to look at the OSMFPlayer example, which has a skinnable player. You can specify image for every button in the player, as well as background color, etc....
We will be releasing a white paper on the subject of layout in the coming weeks. I'll be sure to include a section on laying out your player controls.
Ryan O'Connell
OSMF Engineering -
Parse and display xml doc when click on JTree node?
Ok so here is the code that I have now. You will have to make alot of html files to run the program, but they can be empty for now. What you can do is just put the same exact html file to be displayed in each node element. for example.
DefaultMutableTreeNode n1_node1_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Device", "device.html"));could be changed to
DefaultMutableTreeNode n1_node1_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Device", "status.html"));And just keep adding the status.html page to each one of the nodes.
anyway.
For now when I click on the node, the html file is displayed in the JScrollPane rPane = new JScrollPane(htmlPane); and the htmlPane is a JEditorPane
what I need it to do.
When I click on the JTree node. I would like to go out to an xml file, parse the information in it, and display it to the pane.
I will need to later, be able to add, edit, or delete information on the xml through the pane later.
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.JTree;
import javax.swing.JPanel;
import javax.accessibility.*;
import javax.swing.UIManager;
import javax.swing.JComponent;
import javax.swing.JEditorPane;
import javax.swing.tree.TreeSelectionModel;
import javax.swing.event.TreeSelectionEvent;
import javax.swing.event.TreeSelectionListener;
import javax.swing.tree.DefaultTreeCellRenderer;
import javax.swing.ImageIcon;
import java.net.URL;
import java.io.IOException;
import java.awt.Dimension;
* @author orozcom
public class Example extends JFrame implements TreeSelectionListener
private JEditorPane htmlPane;
private URL helpURL;
private static boolean DEBUG = false;
private JTree tree;
public Example()
super("Example");
setSize(1200,900);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JMenuBar jmb = new JMenuBar();
JMenu fileMenu = new JMenu("File");
JMenuItem openItem = new JMenuItem("Open");
JMenuItem saveItem = new JMenuItem("Save");
JMenuItem exitItem = new JMenuItem("Exit");
exitItem.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
System.exit(0);
fileMenu.add(openItem);
fileMenu.add(saveItem);
fileMenu.add(new JSeparator());
fileMenu.add(exitItem);
jmb.add(fileMenu);
setJMenuBar(jmb);
// **************** start JTree ******************//
JPanel lPane =new JPanel();
lPane.setLayout(new BorderLayout());
DefaultMutableTreeNode top = new DefaultMutableTreeNode(new ModuleInfo("Devices","splashScreen.html"));
DefaultMutableTreeNode branch1 =
new DefaultMutableTreeNode(new ModuleInfo("Module 1", "module1.html"));
DefaultMutableTreeNode branch2 =
new DefaultMutableTreeNode(new ModuleInfo("Module 2", "module2.html"));
//DefaultMutableTreeNode branch3 =
//new DefaultMutableTreeNode(new ModuleInfo("Module 3", "module3.html"));
//adding to the topmost node
top.add(branch1);
top.add(branch2);
//top.add(branch3);
* BRANCH 1 *
//adding to the First branch
DefaultMutableTreeNode node1_b1
=new DefaultMutableTreeNode(new ModuleInfo("Status", "status.html"));
//branch1.add(node1_b1);
DefaultMutableTreeNode n1_node1_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Device", "device.html"));
DefaultMutableTreeNode n2_node1_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Network", "network.html"));
DefaultMutableTreeNode n3_node1_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Chassis", "chassis.html"));
DefaultMutableTreeNode n4_node1_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Resources", "resources.html"));
node1_b1.add(n1_node1_b1);
node1_b1.add(n2_node1_b1);
node1_b1.add(n3_node1_b1);
node1_b1.add(n4_node1_b1);
DefaultMutableTreeNode node2_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Project Editor", "projedit.html"));
DefaultMutableTreeNode node3_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Project Manager", "projmngt.html"));
DefaultMutableTreeNode node4_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Administration", "administration.html"));
DefaultMutableTreeNode n1_node4_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Device", "device.html"));
DefaultMutableTreeNode n2_node4_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Network", "network.html"));
DefaultMutableTreeNode n3_node4_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Users", "users.html"));
node4_b1.add(n1_node4_b1);
node4_b1.add(n2_node4_b1);
node4_b1.add(n3_node4_b1);
DefaultMutableTreeNode node5_b1 =
new DefaultMutableTreeNode(new ModuleInfo("Logging", "logging.html"));
branch1.add(node1_b1);
branch1.add(node2_b1);
branch1.add(node3_b1);
branch1.add(node4_b1);
branch1.add(node5_b1);
* BRANCH 2 *
//adding to the Second branch
DefaultMutableTreeNode node1_b2 =
new DefaultMutableTreeNode(new ModuleInfo("Status", "status.html"));
DefaultMutableTreeNode n1_node1_b2 =
new DefaultMutableTreeNode(new ModuleInfo("Device", "device.html"));
DefaultMutableTreeNode n2_node1_b2 =
new DefaultMutableTreeNode(new ModuleInfo("Network", "network.html"));
DefaultMutableTreeNode n3_node1_b2 =
new DefaultMutableTreeNode(new ModuleInfo("Chassis", "chassis.html"));
DefaultMutableTreeNode n4_node1_b2 =
new DefaultMutableTreeNode(new ModuleInfo("Resources", "resources.html"));
node1_b2.add(n1_node1_b2);
node1_b2.add(n2_node1_b2);
node1_b2.add(n3_node1_b2);
node1_b2.add(n4_node1_b2);
DefaultMutableTreeNode node2_b2=
new DefaultMutableTreeNode(new ModuleInfo("Project Editor", "projedit.html"));
DefaultMutableTreeNode node3_b2=
new DefaultMutableTreeNode(new ModuleInfo("Project Manager", "projmngt.html"));
DefaultMutableTreeNode node4_b2=
new DefaultMutableTreeNode(new ModuleInfo("Administration", "administration.html"));
DefaultMutableTreeNode n1_node4_b2=
new DefaultMutableTreeNode(new ModuleInfo("Device", "device.html"));
DefaultMutableTreeNode n2_node4_b2=
new DefaultMutableTreeNode(new ModuleInfo("Network", "network.html"));
DefaultMutableTreeNode n3_node4_b2=
new DefaultMutableTreeNode(new ModuleInfo("Users", "users.html"));
node4_b2.add(n1_node4_b2);
node4_b2.add(n2_node4_b2);
node4_b2.add(n3_node4_b2);
DefaultMutableTreeNode node5_b2=
new DefaultMutableTreeNode(new ModuleInfo("Logging", "logging.html"));
branch2.add(node1_b2);
branch2.add(node2_b2);
branch2.add(node3_b2);
branch2.add(node4_b2);
branch2.add(node5_b2);
* BRANCH 3 *
//adding to the Third branch
DefaultMutableTreeNode node1_b3=new DefaultMutableTreeNode("Status");
DefaultMutableTreeNode n1_node1_b3=new DefaultMutableTreeNode("Device");
DefaultMutableTreeNode n2_node1_b3=new DefaultMutableTreeNode("Network");
DefaultMutableTreeNode n3_node1_b3=new DefaultMutableTreeNode("Chassis");
DefaultMutableTreeNode n4_node1_b3=new DefaultMutableTreeNode("Resources");
node1_b3.add(n1_node1_b3);
node1_b3.add(n2_node1_b3);
node1_b3.add(n3_node1_b3);
node1_b3.add(n4_node1_b3);
DefaultMutableTreeNode node2_b3=new DefaultMutableTreeNode("Project Editor");
DefaultMutableTreeNode node3_b3=new DefaultMutableTreeNode("Project Manager");
DefaultMutableTreeNode node4_b3=new DefaultMutableTreeNode("Administration");
DefaultMutableTreeNode n1_node4_b3=new DefaultMutableTreeNode("Device");
DefaultMutableTreeNode n2_node4_b3=new DefaultMutableTreeNode("Network");
DefaultMutableTreeNode n3_node4_b3=new DefaultMutableTreeNode("Users");
node4_b3.add(n1_node4_b3);
node4_b3.add(n2_node4_b3);
node4_b3.add(n3_node4_b3);
DefaultMutableTreeNode node5_b3=new DefaultMutableTreeNode("Logging");
branch3.add(node1_b3);
branch3.add(node2_b3);
branch3.add(node3_b3);
branch3.add(node4_b3);
branch3.add(node5_b3);
tree=new JTree(top,true);
//tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
tree.getSelectionModel().setSelectionMode(TreeSelectionModel.CONTIGUOUS_TREE_SELECTION);
//Set the icon for leaf nodes.
ImageIcon deviceIcon = createImageIcon("/device.gif");
if (deviceIcon != null)
DefaultTreeCellRenderer renderer = new DefaultTreeCellRenderer();
renderer.setLeafIcon(deviceIcon);
tree.setCellRenderer(renderer);
else
System.err.println("Leaf icon missing; using default.");
//Listen for when the selection changes.
tree.addTreeSelectionListener(this);
//Create the scroll pane and add the tree to it.
//JScrollPane treeView = new JScrollPane(tree);
tree.setToolTipText(" and ");
lPane.add(tree);
getContentPane().add(lPane);
// **************** end JTree ******************//
htmlPane = new JEditorPane();
htmlPane.setEditable(false);
initHelp();
JScrollPane rPane = new JScrollPane(htmlPane);
JSplitPane jsp = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT, lPane, rPane);
jsp.setDividerLocation(180);
getContentPane().add(jsp, BorderLayout.CENTER);
JPanel bPane = new JPanel();
JButton okButton = new JButton("Ok");
JButton applyButton = new JButton("Apply");
JButton clearButton = new JButton("Clear");
bPane.add(okButton);
bPane.add(applyButton);
bPane.add(clearButton);
getContentPane().add(bPane, BorderLayout.SOUTH);
setVisible(true);
/** Required by TreeSelectionListener interface. */
public void valueChanged(TreeSelectionEvent e)
DefaultMutableTreeNode node = (DefaultMutableTreeNode)
tree.getLastSelectedPathComponent();
if (node == null) return;
Object nodeInfo = node.getUserObject();
if (node.isLeaf())
ModuleInfo module = (ModuleInfo)nodeInfo;
displayURL(module.moduleURL);
if (DEBUG)
System.out.print(module.moduleURL + ": \n ");
else
displayURL(helpURL);
if (DEBUG)
System.out.println(nodeInfo.toString());
private class ModuleInfo
public String deviceName;
public URL moduleURL;
public ModuleInfo(String device, String filename)
deviceName = device;
moduleURL = (URL)Example.class.getResource("/" + filename);
if (moduleURL == null)
System.err.println("Couldn't find file: "
+ filename);
public String toString()
return deviceName;
private void initHelp()
String s = "YFDemoHelp.html";
helpURL = Example.class.getResource("/" + s);
if (helpURL == null)
System.err.println("Couldn't open help file: " + s);
else if (DEBUG)
System.out.println("Help URL is " + helpURL);
displayURL(helpURL);
private void displayURL(URL url)
try
if (url != null)
htmlPane.setPage(url);
else
{ //null url
htmlPane.setText("File Not Found");
if (DEBUG)
System.out.println("Attempted to display a null URL.");
catch (IOException e)
System.err.println("Attempted to read a bad URL: " + url);
/** Returns an ImageIcon, or null if the path was invalid. */
protected static ImageIcon createImageIcon(String path)
java.net.URL imgURL = Example.class.getResource(path);
if (imgURL != null)
return new ImageIcon(imgURL);
else
System.err.println("Couldn't find file: " + path);
return null;
public static void main(String args[])
new Example();
//new AssistiveExample();
}Thanks orozcomyes i can at the time of MIRO u can see both
go in SU01 for and user
in Parameters enter IVFIDISPLAY in Parameter ID and X in Paramater Value
thus for that user u will be able to c Invoice number and accounting number after saving MIRo
u will get message like
Invoice document 5105608893 was posted ( Accountng Documnt: 5100000000 )
hope this helps -
Photoshop: How to save as a pdf and display description?
The only other Photoshop I ever used was CS3, and when I clicked "print" it saved as a pdf first, and I could choose to make it display different metadata. That feature has been removed for all newer versions for some reason, and I have no idea how to do what I want to do.
I need to save it as a pdf, and display the description/subject metadata under the photo. I can't find anything online on how to do this.BlazeHeatnix,
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
Please understand that "CS5" does not clear up the issue of what version of Photoshop you are using. "Photoshop CS5 12.0.1" would.
A screen capture would be very helpful.
Also, have you trued the Print command, then Save As PDF?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
CS5.1 with Mac OS X Retina Display
Hello,
I recently installed adobe elements CS5.1 onto my Macbook Pro retina display running Mountain Lion. All of the Adobe programs (Photoshop, Illustrator ect) are blurry and pixelated when I open them. Can you please let me know of a solution to this problem? I especially notice it with the fonts dropdown. Thanks!This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com. -
Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 after?
I have just installed CS4 on Windows 7 and I get the message that I need to update NVIDIA driver.
Is it really neccassary to update driver even if I have no problems using Photoshop?
Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 afterwards or is there a way around it?
Here are the technical details:
Processor speed: 3325 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 220/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce GT 220
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver Version: 8.15.11.8627
Built-in memory: 3063 MB
Free memory: 1981 MB
Memory available to Photoshop: 1643 MB
Memory used by Photoshop: 60 %
Image cache levels: 4I have never had to reinstall any program for a video driver.
Now, check out the instructions for your particular nVidia driver, and the exact steps can differ. Just did my Quadro FX-4500 and it was just an install over the older driver. However, looking at another nVidia card's driver, and there were 3-4 settings in the nVidia console, that had to be reset BEFORE installing that driver. Did not affect me, but would have been a different operation for the next guy, with a different nVidia card. nVidia makes it easy with the necessary instructions - follow those to the letter, or issues can arise and the entire driver can get hosed. Things could be a simple as download, and execute, to having to do several things before you execute.
Good luck,
Hunt -
Windows 7 RC and Display Question
I have successfully installed Win 7 64 bit on an early Mac Pro with Nvidia FX 4500 display adapter attached to acrylic 23 Cinema Display via Apple ADC-DVI adapter. Both the current Nvidia Win 7 64 drivers and those automatically installed during Win 7 setup failed to work except in safe mode as a generic VGA adapter. With regular boot up, the display remained black.
I downloaded from the Nvidia site an archived driver for Vista 64 bit dated 8/2008 that worked, recognizing a "PNP display." This driver file allowed use of the native Cinema Display resolution.
Does anyone know why the most recent and specific Win 7 drivers fail to work with my display and adapter???papadude wrote:
Hi, Do you have a working solution for the Scanjet G4050 driver for use with Windows 7 (32 bit)?
This page indicates G4050 drivers are available from Windows Update and will be available for download from HP.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Maybe you are looking for
-
How to declare and use a variable in BI Publisher report
Hi Experts , I have to groups of serial numbers and both group are put in same table and same row one after another , and i have a condition that if no serial number is present in both group than the line of that table should not be appeared ,i used
-
FCP wont open motion projects on tileline anymore
I have been using the FCP suite by creating motion projects and imoporting the project file onto my fcp timeline, I really like doing this it cuts out allot of wasted time. However I just installed the new itunes and the new quicktime update and sudd
-
Workflow status is getting cancelled .
Hi All , I am using a workflow which working completely fine but at the end of workflow I am getting the status as ''CANCELLED" rather than Completed, I can see in the log that after the complition of last step I am getting the status logically delet
-
Error while running in background for inherintance
Hi All, i am inherinting the customised class from the standard class CLASS zcl_history DEFINITION INHERITING FROM cl_gui_alv_grid FINAL. But while running in the background it is showing fatal error .
-
JUST PROBLEMS rendering and quality issues
Hey, all. I've been posting here a few months and recently got a mac and fcp. I've been editing for over ten years on velocity and avid. Had great luck at figuring stuff out with manuals and the threads and freinds. But I'm at a total loss trying to