CSS....Format Tags Not Working Properly IN Fire Fox
Hi Folks,
Setting up a External style sheet.... the h tags (h5 and 6)
in this case are not letting the text align to top of the table in
fire fox.
When I preview in FF the text is one return down from the top
and in IE it is at the top.
When I take the Htags off and preview in Fire Fox they are in
the right place.
I've tried aligning in everyway possible, with css and in the
properties panel. Why is fire fox having an issue with the tags.
Won't align correctly......
Thanks so much
Can you try giving a custom format expression as below
=IIF(Val(Fields!FieldName.Value)<0,"(#,##0,,)", "#,##0,,")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Similar Messages
-
Date format is not working properly for Calender value help
Hi Experts,
We have two problems.
1. We want to change the format of date displayed. We want format of dd-MMM-yy. For that we have created one Simple
Type Dictionary Object with Displaying format dd-MMM-yy. It is working
fine for the non editable UI. But once I apply the dictionary type
object as data type for an input field, probem happens. Once the user
choose a date from calender value help the value in the input field is
coming like 01-011-12 not like 01-Jan-12.
The date format is not changing from the calender. But if we set the
display format of the dictionary object to MM-dd-yy or MM/dd/yy or
dd/MM/yy or dd-MM-yy the format conversion from calender to input field
is happening properly.
The only problem once we put MMM in place of MM for the input field
where user is selecting from a calender value help.
2. We want to restrict users from entering the value manually for date input field. The user
should be able only to enter value by selecting from calender value
help.
Please give suitable solution for these problems
Thanks
ShankhaHi Sankha,
Please refer the links below:
http://scn.sap.com/thread/1659463
http://scn.sap.com/thread/1533443
Regards,
Manoj -
Format Expression not working properly in SSRS Report table cell
Hello, for negative number format i am using the following format expression "#,##0,,;(#,##0,,)". For negative zero (negative values rounded to zero) the expression works fine in excel sheets(Format Cell expression) but not giving parenthesis for
negative zero in SSRS Reports.
Please help me for this issue.
Thanks in advanceCan you try giving a custom format expression as below
=IIF(Val(Fields!FieldName.Value)<0,"(#,##0,,)", "#,##0,,")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Keyword Tag not working properly
I'v assigned keywords to all of my pix. If I choose, for instance, from the Keyword Tag list "Lighthouse" it says there are 18 photos containing that keyword. In reality only 9 photos show up on the thumbnails. I went back to search the other nine and they definitely have the Keyword Tag "Lighthouse" in them.
This is happening to all of my keywords. 0 out of 77 show up for another Tag. 23 out of 240 for another. It varies. I did remove and reload LR.
LR 1.3.1 Windows XPThanks John, It was a filter that was on. Problem solved.
-
Undo,redo not working properly with JPopupMenu
if i use JButton for undo ,redo it is working fine. but the same code is not
working properly if i add it in JPopupMenu.
what could be the problem.
thankswhat could be the problem.Your code is different or written incorrectly and since you didn't post any we can't help.
[url http://java.sun.com/docs/books/tutorial/uiswing/misc/action.html]How to Use Actions
If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting. -
Filter and navigation not working properly
Hi Gurus,
I have two reports - report1(source) and report2(target) report.
In report1, it shows two columns - Market_ID, Amount_sold
In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
Best Regards,
Jyes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM -
HTML Editor in HTMLDB Does Not Work Properly
Dear Developer,
The HTML Editor provided in the Build 1.5.0.00.33 (9i) does not work properly. The problems are:
1. When you press Enter Key in HTML Editor <P> tag is
added instead of <BR> tag. This causes inconvenience to the end user while editing & displaying the fields formatted by HTML Editor.
2. Similar problems occur when Bullets are used.
3. Maximum field width for varchar is only 4000 & there is no other field provided by HTML DB which can store more than 4000 characters information.
I would like to know whether:
1. The problem is fixed in the newest buid ?
2. Is there any workaround or am I missing something, please comment.
I am using HTML Editor so that user can write long free flowing HTML text, but end users have inconvenience.
Thanks.Hi Ayush,
The answer to your question 3 is increase the size of the Maximum width on the item. I increased it to 32767 and was able to insert into a clob. I think the limit is 32767.
Vivek -
Jms is not working properly in clustered environment
Hi all,
i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
we are using the jndi.properties as follows ...
java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
java.naming.security.principal=oc4juser
java.naming.security.credentials=oc4juser
oracle.j2ee.rmi.loadBalance=lookup
we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
i have seen that for every instance there one jms server. at runtime it is taking one application servers services
say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
here jms is not working properly when i send message
As we have clustered environment message must be propagated all the applications who use above jndi.properties.
if i keep use only one application server opmn say
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
then its is working excellently
please can u provide any solution ASAP
thanks in advance
ManuDear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN -
JSP-Editor not working properly
Hi everybody,
I am working with ISA5.0 and NWDI. I have checked out the Web-Module Project crm/isa/web/b2b.
Now I would like to modify JSP-Files. Unfortonately the JSP-Editor is not working properly.
The JSP-Editor cannot resolve references to Tag-Libraries like
<%@ taglib uri="/isa" prefix="isa" %>
Furthermore I get Errors with JSP-Includes
<%@ include file="checksession.inc" %>
The JSP-Editor does not show any other compile errors until the above mentioned errors are resolved.
So the JSP-Editor does not help with compile errors.
I have tried to use Lomboz instead, but due to the modularization in ISA5.0 and NWDI (ie the Taglibraries are defined in a separate module) I did not get it to work either.
Does anybody have experience on how to get the JSP editor to work properly?
Thanks for your help,
AndreasHighlite the clip in the timeline, control click on it and choose "send to soundtrack as an audio file project" in the pop up menu. Don't do an "open with editor". This should work.
If it doesn't and it's just the one clip, you could launch Soundtrack and then open that clip as an audio project . . . don't do a open with editor, just open it directly. Make your adjustment and save over writing the file with the new audio. You may want to copy the clip first as a backup. When you open your FCP project, you'll have to re-link the clip. Once you do it will show up with the new sound. -
Resize() of applet is not working properly in java6.0
Hi iam new to applets i have given one task,that is to display multiple tiff pages in applet, So i have written one applet which displays multiple pages tiff file, i have kept next and previous buttons in the applet to navigate to different pages and here iam using resize() of applet for refreshing applet up to now all fine this all thing i have done in java5.0, but i got a requirement to do in java6.0, in java6.0 applet is not refeshing in the webpage.
i found the reason that resize() is not working properly.
Please can someone help me..........
Thanks&Regards
Manmohan ADear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN -
Calendar popup is not working properly in af:inputDate
HI,
I am using af:inputDate component as,
<af:inputDate label="Input Date :"/>
The popup calendar is not working properly in my case. When I click on calendar buttong of the component, it is opening the calendar popup properly with showing proper date.
Now in this popup I am able to change month or year only once. Means if I am watching January month initialy and now I changed it to May, it reflect the month properly. But before closing the dialog, if I again change the month to some another month, it is not changing the calendar at all. The same case is with year also.
One more thing i want you to notice is, this component is working properly on a sample page where there is nothing in that page. But when I am adding it in my application with the same tag, it is not working.
Can any one tell me where I should look for the fix?
SujaySujay,
It's always frustrating when someone says "it is giving me exception" without providing the details. It's akin to going to your automobile mechanic and saying, "a warning light comes on." Wouldn't you think it pertinent to tell the mechanic which warning light came on? If yes, then why wouldn't you provide the exception (and perhaps the pertinent part of the stack trace) here?
Furthermore, since it works in a "very simple page," the component does at least work part of the time. If your car started at least part of the time, you'd tell your mechanic what you did that causes it not to start (for example, when I leave the headlamps on all night, it doesn't start the following morning). So... what is special about your page that it doesn't work?
Best,
John -
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
i was trying to work on texteditor to code a simple html page but its not working properly like the shows only two color on the background that are green and black
i dont know whats the issue but it use to work fine in mountain lion
i have even tried to use color code still it didnt work then i re-installed the os but the same problem again!
is there any special setting ?
i have change it to plain text and traditional html ..
thank youHi,
Do you really think it applies to all these:-
Categories: Accessibility, Boot Camp, Finder Tabs & Tags, iCloud Keychain, iMessage & Messages, Internet & Wi-Fi, Installation, Migration & Setup, Mail, Contacts & Calendar, Maps, Multiple Displays, Printing, Users & Groups, Using OS X Mavericks
Tags:wireless, backup, ical, screen, email, duplicate, printer, preferences, time,
hard, login, restart, vpn, font, dvd, excel, kernel, address, migration, mode, locked,
dvd_problem, hdd, thunderbolt, gray
It would be useful to see the HTML code you are using.
It would also useful to know which version of HTML you are using to do that.
8:57 pm Wednesday; March 12, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Charger is not working properly
Hi, after 10.9.2 update my charger is not working properly. First I thought the problem was the charger itself had died, but then I saw a pale light. I searched here and found that resetting SMC could be a solution. It worked for a while, but now the problem is back and resetting again doesn't work. I also resetted PRAM and nothing happens. The light is now green, but battery status says it isn't charging.
What else can I do? Mavericks updates are a headache that has already made me format my laptop – because of another problem– and I'd love to avoid it. Thanks in advance.If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.
OOW: Take your MBP & charger to your local Apple Store or an AASP. Diagnostic testing is FREE! -
RFC adapter in XI 3.0 not working properly with BAPI in R/3 4.6C
Here is the scenario.
An XML file is received from our customer. This file contains purchase order information that is used to create a sales order in our SAP 4.6C system. Once the sales order is created an acknowledgement is generated and this is returned back to our customer in an XML format. This scenario is working perfectly fine in our XI 2.0 system but is not working properly in our XI 3.0 test environment. Our custom function module in R/3 is a wrapper function that uses a standard SAP BAPI to create the sales order. Part of the function module does use the statement
call function 'BAPI_TRANSACTION_COMMIT'
The last thing the BAPI does is call another function module that using an RFC destination that will return and order acknowledgement.
Here is what happens within XI and our SAP system.
The XML file is received and mapped to our imported RFC. The RFC adapter is called and the information is passed onto SAP where our customer function module executed. The sales order is created within SAP without any problems and the second function module is called which references an RFC destination assigned to our XI 3.0 system. The information is sent back to XI and an appropriate file is created for our customer. All seems to be working properly except that when the original RFC is sent from XI to SAP, SAP creates a short dump stating
"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:" Then it is put back into the que where 5 minutes later it executes again and trys to recreate the sales order in SAP. (again, this same function module executing from XI 2.0 works fine)
I believe I have everything configured properly because the SAP side is being executed and I am successfully passing information back from SAP to XI. However the original function module in SAP is failing with the above error message. It appears that the original function module cannot communicate back with XI. I have had SAP looking at this issue and they have not been successful yet in solving this problem.
Any ideas.
Thanks,
Jim d'HulstHi,
I think the problem is with the send back of acknowledgement to XI. Does the DeliveryException state something about the sender agreement? I guess you are using a statement like below:
CALL FUNCTION 'ZABCD'
destination <tcp/ip destination>
exporting
input = ack.
In that case, check whether the TCP/IP destination is working fine. Also, to be able to exchange message, the structure of the Function Module ZABCD needs to be identified as the sender in XI Configuration (Integration Directory).
Also, check your config with the blog mentioned below:
<a href="/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit">/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit</a>
Regards,
Amitabha
Maybe you are looking for
-
I have an iPad Air and want to downgrade to iOS 7. How does this work?
iOS 8.1 is really slow on my iPad Air so i want to downgrade to iOS 7. What should i do?
-
AP ageing report & LSMW parking
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. > Hi Guys I have two questions 1] Is any standard report is available for ageing
-
SQL Query - SCOM2012R2 Performance Counter
Need some assistance with a SQL query against my SCOM DW. I want this to do a select within a select. The inner select must collect the raw data for a performance counter, for the last 5 minutes. But SCOM will only give me counters that collected in
-
Hey All, I hope this is the correct forum. I just started working with Flex in addition to my other duties. The learning curve has been pretty steep for me so far. I need to speed things along and I'm willing to compensate someone for their time. You
-
Hello, i need to to convert mpg file to flv file using java. could any body help please