CTBW - Unable to add add't characteristics to datasource 0MATERIAL_ATTR

Hi BW Gurus,
I need your help on this. I need to add additional classification characteristics from the material class (001) to an existing datasource 0MATERIAL_ATTR (1CL_OMAT001) using transaction CTBW. The characteristic I am trying to add is one with the "multiple values" flag checked. I have applied note 350296 to allow extraction of multiple value characteristics (The system supposed to only extract the first of the multiple values).
I am receiving message "Characteristic Y_XXXXXX does not exist" when I tried to add the new entry. I checked and make sure that this characteristic does exist using transaction CL03.
Am I missing someting here? Since the datasource was created using class type 001, Can I pick characteristics from any class within the class type 001. Our system does have multiple classes with class type 001.
Any help you can offer would be greatly appreciated.
Thanks,
Andrew

I have resolved the issue.

Similar Messages

Cannot add a new characteristics from the system catalog

Hi,
I am trying to pull and add a new characteristics from the existing characteristics catalog. However when i save and activate the new char, the system throwing a yellow warning message as "Field KMKDGR has the same name as field KDGRP". When i proceed to save it since its just a warning message the system says all fields are saved. However when i quit and come to the characteristics list of the op concern, i notice the new characteristic is not added into the list of characteristics. Why is it so?
Is it because of the warning message?

Hi
The warning message can be ignored...
Once you save the char, you need to reactivate your data structure in KEA0... Ideally, when you save and press the back button, system itself gives a pop up message to reactivate the data structure...
1. Push the char from right to left
2. There will be a "match-stick" icon at the top left of the screen.. Click it
3. Then press back button
4. Whether with our without pop up message, activate your data structure in KEA0
Regards
Ajay M

I followed your help directions on "Corrupt extension files" under "Unable to install add-ons", foolishly deleting the files you told me to. Now firefox won't open. I tried reinstalling firefox but it still won't open. Now what do I do?

I was trying to install the SEOQuake add on. After clicking install Firefox would hang up saying the script had timed out and asking if I want to stop it or continue. Didn't matter which option I chose nothing would happen. The only way to stop it was to close Firefox and restart. Tried restarting the computer. Still wouldn't install. Tried installing the Outwit add on and got the same error leading me to conclude it was a problem with Firefox, not the add on. I found this help page <http://support.mozilla.com/en-US/kb/Unable+to+install+add-ons?s=addons+won't+install&as=s> and did everything it told me to. Finally at the end I got to "Corrupt extension files". I foolishly deleted the files you told me to and now Firefox won't even start! I tried reinstalling Firefox and it still won't start. Tried restarting the computer. I have no idea how to get back to where I was let alone install the add ons I wanted to install. Please help. At this point I'd just be happy to be able to get Firefox working.

See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I am unable to manually add artwork via itunes 12 on windows 7. I've tried all the suggestions to no avail. Has anyone succeeeded on the same platform as me?

i am unable to manually add artwork via itunes 12 on windows 7. I've tried all the suggestions to no avail. Has anyone succeeded on the same platform as me?

The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
If you still cannot add artwork via any of these methods then I would suspect a permissions problem. See Repair security permissions for iTunes for Windows.
tt2

Unable to view / add / change apps in hpconnected

I am completely unable to view, add or change my apps for my printer on the hpconnected website. All other sections of the website work - I can see my device (it says it is working properly), etc - but when I click on the "Services" tab, it just "Retrieving Subscriptions" and gets stuck there. This has been the case now for over a week - so I assume its not a service related issue but instead specific to my account.
Any ideas on what could be causing this? I have tried restarting the printer, reconnecting it to the internet, etc. It says that it is connected to hpeprint in its status. Anything else I might be able to do to get this working? I wanted to get the scan to email app on to this printer.
Thanks for any advice.

Hello adahya,
Welcome to the HP Support Forums!
Sorry to hear about the problems installing / managing Apps when logged into HPconnected.com. I would like to see if I can help find a way to get this working for you, can you answer a few questions first?
What is the model of printer?
What is the Operating System installed on the computer, Windows or Mac?
What is the web browser you are using to log into HPconnected.com with?
Look forward to hearing back from you.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to manually add podcasts or TV shows

I am unable to manually add podcasts or TV shows to my 5.5G iPod. I have restored the iPod, thrown out the com.apple.ipod.plist, switched from sync to no sync, it makes no difference. I cannot drag Podcasts or TV shows from my iTunes list to my iPod in the device menu. It just won't accept them. The iTunes help document specifically says that I should be able to do this. They only way I can get podcasts or shows onto the iPod is to sync them, which doesn't let me put the specific episodes that I want on my iPod. I have my music set to sync, which is what I want. Is this a known bug? Any thoughts? I'm using iTunes 7.7. I have no problem dragging individual files to my iPhone.

They only way I can get podcasts or shows onto the iPod is to sync them, which doesn't let me put the specific episodes that I want on my iPod.
It does if you choose "selected podcasts" or "selected TV shows" in your preferences within the summary screen.
I have my music set to sync,
If you have chosen to auto sync your music, you cannot drag and drop other content such as Podcasts or TV shows to the iPod.

I cannot add add-ons with aurora

I just downloaded aurora firefox and I want to add add-ons. I went to the add-on manager and clicked on "get add-ons". all it tells me, is that, "when you are connected to the internet this pane will feature some of the best and most popular add-ons for you to try out". But I am connected to the internet. So how do I get add-ons?

What happens when you try?

Unable to Manage Add-ons to My Account over the In...

On 27th Oct I signed up for a telephone and broadband service in a shopping arcade.
On 29th, I got a letter from BT detailing the order. The add-ons I expected were missing. I was particularly worried that I was Ex Directory and I did not want to lose my existing entry - the directory staff might close off at any time, leaving me unlisted for a whole year.
The letter told me I had an e-mail address and password, and I should check for e-mails regularly. During November I tried to access it but couldn't. I looked at BT sites and there were promises that I could amend my details over the internet.
- "Welcome to My BT
- My BT has everything you need online - you can view and download your bills 24/7, manage all your services, track your orders, get the latest offers and help - and much more"
I could not get this to work either.
Nearly 30 different explanations/advice I got for why I had no e-mail and couldn't change Add-ons over the internet are listed below.
(1) 0800 111 4567: E-mail is not working because the line is not yet connected.
I asked for technical support since this seemed to conflict with the letter.
(2) Security locked - give it 5-10 min.
I tried for 80 min. On dialling the same number
() explanation 1 again, and I asked to speak to a supervisor.
(3) Super said wait until Broadband is connected.
BT.custhelp let me send a complaint (I would rather have called it a problem at this stage). I also e-mailed a copy to the salesman.
The salesman asked me to explain what I had, in fact, patiently and carefully put in the e-mail.
(4) He said he would call BT and cancel the order. I told him I thought his brinksmanship was a poor show.
(1 again) He said to wait until the line was connected and it would be easy to sort out.
(5) Eventually he insisted on handling the Directory Entry: I also wanted a slight change to the entry so that it said {Surname} {Wife's initial} and {My initial}. It took three attempts to get him to understand this, possibly because he was in the noisy arcade. This is why I prefer to do things on-line or by post.
(6) E-mail in reply to the "complaint": wait until connected. The originator said that he was to send a helpful e-mail within 24 hours. Call closed. I had 7 days to re-open it (what if on holiday?) The e-mail never arrived.
I re-opened. A... in Belfast 'phoned me - she was enthusiastic about helping me.
(7) Unfortunately, she had already gone into my account and changed me to paperless billing. This is not one of the things I wanted - another reason to want to do my own amending on-line. She volunteered to change this so I will get both paper and on-line bills.
(6 again) She will send me a helpful e-mail with a link, and she persuaded me that the call could be closed. I am not sure I ever got that e-mail.
(8) A... 'phoned again to give me a number to call about the directory entry: I thought she had arranged something and the number she gave me would connect me with someone who would know.
The engineer arrived, connected me to BT and transfered the number. He was efficient and helpful. (But he knew nothing about BT e-mail etc.)
The 'phone line worked well and the Broadband was faster than my previous service.
I got to access my Btinternet.com e-mailbox.
I could not access BT.com/youraccount to change my Add-ons because
(9) The system claimed I had chosen the security question "Mother's Maiden Name" from a list given to me. I had not chosen this. A... had asked me that question in order to set it up but when I did not reply immediately, she gave me a choice and let me set up a different question.
Later, I accessed this web page again and instead of asking me for Mothers Maiden Name, it asked me to set up the security question and gave me the options.
I tried to get in to update my Add-ons or my Account.
(10) "We are sorry. Our records show ... Outstanding order on this line ... to discuss ... helpful advisor on 0800 731 0286 8 am to 10 pm Mon to Sat".
(11) I 'phoned this. A2 said this was Directory Entry business, but it would clear at midnight.
(10 again) The following day, same message on BT.com.
I remembered A...'s words and 'phoned the number she had given regarding my Directory entry.
It was a general number for Directory things and when I got through the "Press 1 for ..." maze, the Advisor seemed to have no record of my problem.
(12) She said that I did have a Directory Entry, so either the original threat in the letter to make me Ex- has not (yet) been processed or the salesman came through.
(13) With regard to the listing, I explained what I want, but what she said in her thick accent gave me mixed feelings about if I will get it.
(14) 0800 713 0286 again. Advisor said there was no outstanding order. I should be able to get on now. I tried BT.com again
(15) "We are sorry ... we have noticed you already have one of our great package deals. Please call one of our helpful advisors on 0800 800 150 who will advise you on how to change your package."
I tried again. This time, I get
(16) "We are sorry we are unable to show you what your calling plan and add ons are. You may still change them on line - simply click the Change your Calling Plan link. Or contact a customer advisor on 0800 800 150 from 8am to 10 pm Monday to Saturday." I clicked 'Change your Calling Plan'.
The next screen showed a radio control against my Account number and phone number and another to allow me to enter an alternative number and my postcode. I clicked the control against my existing details and ticked a check box to confirm me as the account holder. A screen told me that my 'phone line was being checked. The next screen was a repeat of the message about already having a package deal.
I called 0800 800 150. I had a lot of trouble working out an appropriate key to press in response to the automated message and I got told
(17) "We do not have an order for you", but I got some more options. Remember that it says on the internet that I can call from 8am to 10pm. Ut was only 9:15.
(18) After going through all the rigmarole, I was told that Advisors are available 8am to 9pm.
(An e-mail to my BT.com preferred address told me I could now look at my bill online. I followed the link. The web page had no bill on it and none of its four links got me access.)
I called 0800 800 150 again.
(19) The advisor did not know anything about the internet - I should contact BT Shop on 0800 917 0510 where someone would talk me through it. Unfortunately, they were now closed for the weekend.
(20) He continually pushed for me to do my Add-ons over the 'phone - yet he had obviously not listened to what I had said since he wanted to fix the wrong things for me.
I received a letter confirming signing up for online billing.
An e-mail on Btinternet.com thanked me for signing up to BT.com.
(21) I was to click a link in it to finish the procedure. I did this.
Immediately I was set up for On-line Billing only. No advance warning. No confirmation screen. It seems incredibly easy to update my details over the internet to what BT want them to be, but, once again, it was impossible for me to get in and update them to what I wanted.
(22) Logging out I got "We are sorry, but there has been a problem/ Your order can not be fulfilled".
(23) The letter mentioned screen option "Profile". There was one called "Your Profile". I had not tried this before. It sent me off to a screen about BT OneID. A red herring.
(24) I called BT Shop. Internet was nothing to do with them.
I called 0800 800 150 again. The Advisor said she would also have recommended BT Shop.
I called 0800 800 150 again. A transfer, I forget where. No sooner had I got through than I was cut off by a dialling tone.
Dialled 100. After a strange procedure, I was through to an Accounts Advisor.
After another little adventure, he put me through to what I thought he said was the Accounts Department.
(25) The lady said that Call Centres know nothing about the internet, and that I will never be able to use it to access my details since I will only be able to speak to Call Centres. She said she was in the Cancellation Department.
(26) This probably meant that the previous Advisor had thought that my only hope was to cancel my entire service and get a new one.
She transfered me to Billing.
(27) S... checked my details and said that I did not have Paperless Billing set up(!), nor Direct Debit. I think also redit/Debit Card details that I had seen on one of the internet pages. She assured me that if I put these in I would be able to amend my Add-ons (I could change/delete these afterwards if I wanted).
Setting up the Direct Debit was complicated by one screen saying that I could change to a Regular Payment or Direct Debit, and the next only mentioning Regular Payment: in trepidation I opted for the Regular Payment, and the screen after that allowed me to set up the Direct Debit.
Having set up all the options suggested, I waited to be able to change my details. And waited.
It was at this point that I searched the internet for "We have noticed you already have one of our great package deals." It came up with BT Community Forum, and that the visitors all say how helpful the Moderator is. Here goes.

Hi Jim-in-Hemel,
Welcome to the forum. Sorry to hear of the problems you're having with your order.
If you could send in your forum username and BT account details to the email address registered against my profile I'll see what we can do to help.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Unable to compile add.jsp

I am able to run the examples in the tomcat, but unable to run my own add.jsp which tries to connect to oracle9i. The following error is displayed. add.jsp file is copied at the end of this error message.
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
C:\Tomcat 4.1\work\Standalone\localhost\examples\add_jsp.java:7: '.' expected
import DbConnect1;
^
1 error
     at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:130)
     at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
     at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:353)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:370)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:473)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:190)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:494)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2417)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:193)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:781)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:549)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:666)
     at java.lang.Thread.run(Thread.java:534)
The add.jsp contents are
<%@page contentType="text/html" import="DbConnect1,java.util.*,java.sql.*,java.lang.*"%>
<html>
<head><title>JSP Page</title></head>
<%
String no,name,c;
//int n;
no=request.getParameter("NUMBER");
//n=Integer.parseInt(no);
name=request.getParameter("NAME");
c=request.getParameter("check");
if(c==null) c="";
if(c.equals("1"))
out.println("Retry Again");
if(name==null )
{name="";}
if(!name.equals(""))
          try{
          DbConnect1 t=new DbConnect1();
               t.insert(no,name);
               response.sendRedirect("display.jsp");
          }catch(Exception e){response.sendRedirect("add.jsp?check=1");
else {%>
     <form action="add.jsp" method=post>
     <input type=hidden name=check>
     <BODY BGCOLOR=PURPLE>
     <BR><PRE><FONT COLOR=WHITE SIZE=4 STYLE="WESTERN"><B><BR><BR><BR><BR> NUMBER <INPUT TYPE=TEXT SIZE=10      NAME="NUMBER">
     <BR><BR> NAME <INPUT TYPE=TEXT SIZE=20 NAME="NAME"><BR>
     <BR><BR><BR><BR> <INPUT TYPE="SUBMIT" VALUE="ADD" onClick="display()">
     </FORM>
     </form>
     <%}%>
<SCRIPT LANGUAGE ="JavaScript">
function display()
window.location="/project/display.jsp"; }
</SCRIPT>
</html>
Any help would be greatly appreciated.
Thanks
Geetha

if you want to know how to declare a package for your classes
Follow the steps to make your application work
Make this as the first statement in your DbConnect1 class
package DbConnect1;
Compile the class and place the DbConnect1.class file into
Tomcat/webapps/<yourapplication>\WEB-INF\classes\package\ directory
for eg : if your package name is test then place the class files under
Tomcat/webapps/<yourapplication>\WEB-INF\classes\test directory
This is where Tomcat looks for class files
If you have any doubts regarding directory dtructure to be followed in Tomcat please refer to some of the example packages under Root directory
In your JSP say
page import = packageName. DbConnect1
-Hope this helps
Regards
Manikantan

Change COPA Report - need to add Variable and Characteristics

Hello,
I need to change the existing COPA report, Need to add WBS element as a selection criteria and also a characteristics so it can be drilled down. Create WBS as a global variable in KE3E and it is not showing up in when i change the report in KE30 in the available list of characteristics. And also it is not showing up in KE35 when i change the general selection to add as a Variable.

Go to KE91 and create the report.
In KE91, the Characteristic Cost element (KSTAR) is available. Add it as below.
Cost Element .... Check the box Hierarchy node ...... check the box Variable on/off ...... KSTAR...... Cost element.
After this, just check in Variable, the Cost element shuold appear
Line item based reports are defined in KE91 (segment level reports in KE31).
Both types of reports can be started in KE30 and changed in KE32
Let us know if you still have any queries
Thanks
Edited by: nkonnipati on Feb 19, 2012 5:34 AM

Unable to edit, add or change passwords in iphoto web gallery

Iphoto and Web Gallery were working great but recently, I am unable to add, change, or delete passwords to my web galleries. When I go Settings and into Edit Names and Passwords, I can add or change a password but when I click OK, it will not allow either clicking on OK or hitting return. I have also posted an album to web gallery and it does not appear in the list in Settings or in the Edit Name and Password lists but I can see my gallery out on the web with all photos.
Any help on why this is. I have both a IMAC and a Macbook and it is the same with both computers using my imac account. Both have updated software and the Macbook has Parallels installed. I
ran repair in Keychain Access with no problems. I created another account and this did not help.
Thanks

bretj:
Welcome to the Apple Discussions. Try the following:
1 - repair disk permissions with Disk Utility.
2 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I recently asked a question regarding my ipad calendar not syncing. Now I noticed I am unable to even add an event ( the sign in the upper right hand corner) is greyed out, nothing happens when you touch it. My notes aren't syncing either

Calendar not syncing, unable to add events as the + sign at the top right is greyed out and nothing happens when you touch it. Then realized that my Notes aren't syncing either nor are my reminders. What the heck is going on. This ipad mini is just barely 6 months old. Software is up to date. Someone please help me.
I have always wanted an ipad now beginning to wonder why...

Turns out once I shut down the iPad and turned it back on my issues were resolved.
Thank you

TS3899 Unable to re-add email account after updating to IOS 6

Hi,
I have tried to search to see where this has been covered previously and have followed many of the helpful suggestions.
I have updated to IOS 6. On IPhone 4.
I was unable to send email. I have followed all tips such as switching phone off.
I have deleted email account as it kept saying "null accout is already configured..".
Now I can't add my email account again.
I have been on email providers website and can get web mail fine.
Any suggestions would be most welcome.

precisely the same issue on 2 computers on 10.9 and 10.10
- the accounts are google apps for business accounts
- imap is on
- 2 step verification is off
- upgrading the 10.9 machines resulted in the same issue/error
- running onyx and cleaning out everything did nothing
- trashing mail prefs nothing
- creating new user account on the macs...same issue
- i can setup the accounts on my own 10.10 machine (ios also works for those 2 accounts)
completely dead in the water....my next step to try is to clean install the 2 effected machine....

Approval unable to see add additional line items

Hi Everyone,
User created a shopping cart which went to the approver for approval. Approver was unable to see blank line items to add further more items. This is case with only single user for other users shopping cart this is working fine.
Regards,
Munna

Hi,
I have received the following error message.
Account 1999990, company code xxxx is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

I am unable to manually add music to my iphone.

I have an iphone 3gs. Laptop running windows XP.
I have, for years, manually managed my music etc. I have the "manually manage music" box checked.
But when I drag music onto my phone in the sidebar, instead of getting the "+", at which point the device shows the spinning "synch" circle, I get a grey crossed out circle - the international symbol for "NO".
My phone has space on it.
Also, if I delete a song off my phone in itunes, it doesn't actually delete it off the device - there is no "synch" process. If i delete the song off the phone through the music ap, my computer/itunes thinks it's still there.
All i want to do is add an album, but this *** doesn't even do that. What is it, is my phone no longer supported by itunes because it's old?
Have i simply gone too long without buying a new phone and now it's "locked" (im being facetious, i know, but this is infuriating).
Please note, i do NOT want to "restore" or delete my phone. That is not a viable option for this sort of thing. You wouldn't get that in a hospital: "I've broken my finger."
"Ok, let's cut your arm off, and attach a new one"
I also do not want to automatically synch music - doing so will erase my music, and my computer library is bigger than the phone. I only want specific songs that i chose.

The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
If you still cannot add artwork via any of these methods then I would suspect a permissions problem. See Repair security permissions for iTunes for Windows.
tt2

CTBW - Unable to add add't characteristics to datasource 0MATERIAL_ATTR

Similar Messages

Maybe you are looking for