CUCM Upgradign from cucm 7.1.3-3000-1 to cucm 8.6.2-2000-2

Dear All,
I am doing upgrade from CUCM 7.1.3 to 8.6.2. COP file is successfully installed. CUCM 7.1.3 is installed on cisco UCS c200 series OS is ESXI with 4GB memory and 80GB Hard Disk. When it installing CUCM 8.6.2 database it provide a screen with error and then revert back to previous version. Image of screen and Installation error logs is attached. Kindly help me out?

Hi,
I think this bug could be the issue
Upgrade process needs to cleanup refresh upgrade files
CSCtq68899
Description
Symptom:
When performing L2 upgrade on a VMWare server with 80 GB HDD, upgrade fails due to lack of disk space.
Conditions:
Workaround:
Using root access, run the following command:
rm -rf /common/refresh_upgrade
Known Affected Releases:
(1)
8.6
regds,
aman

Similar Messages

CUCM Upgrade from 8.6(2a) / 8.6.2.20000-2 to 8.6.(2a)SU2 (8.6.2.22900-9)

I'm getting ready to upgrade a client's CUCM cluster from 8.6(2a) / 8.6.2.20000-2 to
8.6.(2a)SU2 (8.6.2.22900-9). They use extension mobilty with UCCX version 8.5.1.11003-32.
Does anyone know of any issues with ugprading this cluster vis a vis their UCCX version ?
The current CUCM Version 8.6(2a) / 8.6.2.20000-2 shows a JTAPI shows the following JTAPI version:
admin:show packages active cm-jtapi-
Active Side Package(s): for cm-jtapi- package(s)
cm-jtapi-plugin-8.6.2.10000-2
From the ReadMe For Cisco Unified Communications Manager Release 8.6(2a)SU2
http://www.cisco.com/web/software/282074295/93949/cucm-readme-862asu2.pdf
I see that it shows:
cm-jtapi-plugin-8.6.2.10000-10.i386.rpm
Once I have performed the CUCM upgrade - do I need to upgrade the JTAPI plugin on the UCCX Platform?
TIA

Mohamed,
I have not actually peformed the upgrade yet. If you have done so - please reply with any lessons learned that you have.
I would upload the file to all the servers in your cluster prior to your upgrade maintenance window. This should not be service impacting.
Then during your upgrade maintenance window -
Step 15 Once the Publisher and the subscribers have been upgraded, a version switch must be completed so the servers reboot to the new upgraded partition as follows;
Web Browse to the Publisher’s OS Administration GUI
To restart the system and activate the upgrade, choose Settings > Version; then, click Switch Version.
The system restarts and should be running the upgraded software. Once the Publisher is accessible, proceed with the subscribers.
Good Luck,
Amir

CUCM upgrade from 6.1(2) to 6.1(3b) - rollback problems...

Hi all,
I have upgraded our test lab CUCM server from 6.1(2) to 6.1(3b). Although we have a genuine MCS server bought from Cisco, we run only the demo licencing on the server (simply because we only have a few test phones and gateways running on the server). We have rebuilt this server a few times so we may have had more licences installed previously - the 'demo' licencing seems to allow me test all i need to.
The upgrade to 6.1(3b) seemed to go ok. My only concern was the time it took after the CUCM server restarted for the IP phones to 'register' - seemed to take 30 mins or more before they jumped into life and re-registered etc? Is that normal? (I suspect the CallManager Service took a while to start?)
However, I have had a few problems when trying to rollback the upgrade to the older partition. I followed the Cisco doco and all seemed to work ok, the CLI showed it selecting the old partition on the reboot, and then starting services for 6.1(2) [lots of green [OK] messages etc)
Upon the full restart of the server, i noticed that the CallManager Service and the Cisco Messaging Service were NOT running! I tried all i could think of to get these to restart:Went to Service Activation – stopped and restarted the CallManager service and the other one. Then went back to Feature Services. CallManager was ‘running’ then after i refresh the page it reverts to ‘Not Running’ ! IP Phones therefore do NOT register.
Tried a restart of the server (same partition) - Watching CLI during reboot – all green [OK] messages. No errors reported that i can see. IP phones still dont register when server restarts. The two services remain 'Not Running'
I then restarted using 'switch' and ran the upgraded CUCM version - this started fine, and all ran ok! Phones regsitered, all seems fine!
I have attached a few screenshots, not sure if they are relevant or of any use.
Has anyone seen this issue before after an upgrade? I am not overly comcerned becaue the 'upgrade' worked, but it would be nice to know i can rollback if i need to do incase of any issues.
Is there anywhere in CUCM i can check to see if the failed services are generating an error message or a reason for them not starting?
Thoughts appreciated
Rgds

Hey Andy,
Hope all is well buddy!
The problems you are seeing here are most likely "purely" License related due to the changes
that were implemented between 6.1(2) and 6.1(3). I don't see this being a problem with permanent
"production" Licenses. Have a look;
Cisco Unified Communications Manager Releases 7.1(2) and 6.1(3) introduce these licensing enhancements.
Description
Cisco Unified Communications Manager Releases 7.1(2) and 6.1(3) identify the state of a license; that is, if it is missing, if it is a demo license, or if it is an uploaded license. In addition, Cisco Unified Communications Manager Administration warns you whether Cisco Unified Communications Manager currently operates with demo licenses, with an insufficient number of licenses, or with an incorrect software feature license.
GUI Changes
The following windows display the state of licenses in Cisco Unified Communications Manager
Administration:
- Cisco Unified Communications Manager currently operates with demo licenses, so upload the appropriate license files.
- Cisco Unified Communications Manager currently operates with an insufficient number of licenses, so upload additional license files.
- Cisco Unified Communications Manager does not currently use the correct software feature license. In this case, the Cisco CallManager service stops and does not start until you upload
the appropriate software version license and restart the Cisco CallManager service.
License File Upload (System > Licensing > License File Upload)-This window displays a message
that uploading the license file removes the demo licenses for the feature.
http://www.aironet.info/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613a.html#wp472518
Now for the Cisco Messaging Service
This is only used in "Legacy" integrations which I'm guessing is not
the setup for your lab, so you should be good to go here.
Cisco Messaging Interface Service
The Cisco Messaging Interface allows you to connect a simplified message desk interface (SMDI)-compliant external **Third Party** voice-mail system with the Cisco CallManager. The CMI service provides the communication between the voice-mail system and Cisco CallManager. The SMDI defines a way for a phone system to provide a voice-mail system with the information needed to intelligently process incoming calls.
Hope this helps!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727

CUCM 7.1 sip to Tandberg MXP 3000

Hi All,
Does anybody have any pointers on getting a CUCM 7.1 cluster talking to a Tandberg MXP 3000 via SIP.
We have separate ISDN Bri for our Tandberg and want to get rid of them and pass voice only calls via call manager and a 2821 gateway router with 2 PRI's.
Any pointers would be real helpful.

yes you can
just setup a SIP trunk or H323 ICT trunk with the CUCM
and make sure you have the right setup in VCS and CUCM interns of SIP uri, or H323 ID
and in CUCM make sure you setup the right, regions/codec, locations, and CSS
also by using search rules and transformations in VCS you can control which call to send to CUCM ( for example on PSTN calls )
you can test it before you remove the existing PSTN lines ( recommended )
good luck

Move CUCM VM from one UCS220 to another during maint window

Hello,
I understand it is possible and supported to be able to cold migrate / host to host move a CUCM VM from one Cisco C220 server to another during a maint window to deal with a server issue.
However I can't seem to find the exact process to follow to perform that move. We dont have vmotion but I understand it isn't needed for a cold migration between two C220's.
thanks
Bill

Hi
Yes , you are completely true.You will find all your answers here , but you have to make sure that you have vcenter.
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements#VMware_vMotion
https://supportforums.cisco.com/thread/2208089
Thank you
Please rate all useful information

Export dump only 1000 tables from the schema which contains 3000 tables.

Hi,
I have an requirement to export the dump only with particular 1000 tables from the schema which contains 3000 tables.
As I want to take the dump, I need to mention the List of tables in "TABLES" Parameter. But syntax won't allow for 1000 tables.
Kindly guide me on this to proceed further to take the dump of only particular 1000 tables.
Thanks in advance.
Thanks,
Orahar.

I have an requirement to export the dump only with particular 1000 tables from the schema which contains 3000 tables.
As I want to take the dump, I need to mention the List of tables in "TABLES" Parameter. But syntax won't allow for 1000 tables.
Kindly guide me on this to proceed further to take the dump of only particular 1000 tables.You haven't mentioned the oracle release version.
if you're using 10g, you could use datapump export/import to achieve this. Not a straight way.
Check Metalink Export/Import DataPump Parameters INCLUDE and EXCLUDE - How to Load and Unload Specific Objects - 341733.1
Under section 9. Exporting or Importing a large number of objects.
HTH
-Anantha

Moving CUCM Cluster from 7.1.5 to 10.5 and migrating P2V

Community - What I am looking for is advice from those who have actually done it! Reading about sex and having sex are two different subjects. I am finding relevant docs on the CISCO site, some are contradictory. One doc on CISCO Prime Deployment says yes to CUCM 7.1.5 and another says no. We know the standard "refresh" upgrade process, cop files and that entire drill. What we are looking for is comments from those who have done it before! Our Cluster is mixed MCS servers with CUCM PUB and SUB at Version 7.1.5. Unity/UCCX at 8.0.2 with no HA (don't ask). We want to end up with BE6000 and have UCCX in HA mode on Version 10.5 (10.6)! So what do you think, Migrate all in cluster to a common base like 9, then migrate to VM and upgrade? Or try to do it some other way.
All Comments welcome and very appreciated!

@Jamie I think we eliminated PCD as a strategy. We see this as following the usual upgrade process and assume we will be taking multiple steps. Step one would be to get all on a common version and we are thinking 8.5. At that point we could do the P2V and then upgrade to 10.5 on ESXi. We need to create some HA for Unity and UCCX, but will do that after we get to 10.5. Hopefully we can upgrade the CUCM Publisher, during which time the rest of the cluster will be operational? Put Pub back online as 8.5 and then do the subscriber. Again, we think UCCX and Unity will be operational on PUB as we upgrade SUB. Once on CUCM 8.5 we will then schedule maintenace windows to upgrade Unity and UCCX. At that point we have a cluster on 8.5 ready for P2V. We do that migration and when all are on ESXi, we do the upgrade to 10.5 and add in a HA server for UCCX and Unity. How does that sound? As we really dont want phones rebooting and downloading firmware, we will do that ahead of time, but are researching the level we should get them to before the 8.5 upgrade.
@Amn thanks for the link. We have been reading all we can on the CISCO site, and are really seeking out those who have done this and can share experience.
Thanks to all who comment.

CUCM upgrade from 7.1.5 to 10.5.1.10000-7

Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2.
The reason why I preferred because this jump upgrade we can achieve in isolated network.
In that case can anybody please help to get specific document for that. Kindly have a look on this case.
Regards,
Abi

You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..
Please refer to the vide below.
https://www.youtube.com/watch?v=JzG4kz1_hL4
All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html

CUCM Upgradation from 8.6 to 9.1

Hi
when we upgrade cucm 8.6 to 9.1, can we use the same 9.1 iso file which we wre using for the full installation?
Thanks in Advance....

Hi Midhun,
You need to use an upgrade file, not the bootable file that you use for fresh installation. You can either request it through the PUT tool or you can download it from the following link
http://software.cisco.com/download/release.html?mdfid=284510097&flowid=45900&softwareid=282074295&release=9.1%282%29SU1&relind=AVAILABLE&rellifecycle=&reltype=latest
HTH
Manish

CUCM Upgrade from 9.1.2 to 10.5

Hi all,
I have tested upgrading CUCM from 9.1.2 to 10.5 in my lab. As i read before, we need some cop files to upload to CUCM before upgrade procedure.
Cisco named this upgrade as <Refresh Upgrade> and during this process, RHEL version will also upgrade with CUCM version.
On my test, i dont upload any cop file before upgrade. Just uprade to 10.5 version.
Before upgrade my RHEL version was 5(32 bit) and after upgrade it is 6(64 bit).
After upgrade, everything seems ok but upgrade took lots of time, like 4 hours.
During upgrade there is no connection to CUCM and i saw blue screen :)
What is your opinion? Will this method work on customer enviroment?
Do you test this procedure before?
Best Regards,
Mesut

Dear Carlo & Chris, May I ask you to clarify on below comment which is mentioned in Release note of CUCM 10.5
I don't understand why Cisco has mentioned this, if its not required ? I would appreciate your any inputs.
Preupgrade COP File
If you are upgrading to Cisco Unified Communications Manager Release 10.5(1), or later, from a release earlier than Cisco Unified Communications Manager Release 10.0(1), you must download and install ciscocm.version3-keys.cop.sgn on every node in the cluster. This Cisco Options Package (COP) file has the RSA keys that are required to validate the upgrade. Missing RSA-3 keys will result in status errors in the Software Installation/Upgrade window of the Cisco Unified Operating System Administration interface.
Suresh

Is it possible to transfer an active call from a PLAR line to another extension? CUCM 9.1

We have multiple PLAR's set up that work great but not everyone has them on their phone. So the problem arises when someone who does not have a certain PLAR on their phone and wants to join the conversation. We had hoped that we could transfer/conference the call on the PLAR to the extension of the person who does not have it on their phone but get a busy tone as soon as the transfer key is pressed. Is this at all possible?

I am going to assume that you provisioned PLAR by using a "null" translation pattern (i.e. pattern with no digits). And that the phones will automatically connect to the PLAR destination when they go off hook.
When you try to do a transfer, the CUCM digit analysis process will use the same CSS logic as it does for a standard/direct call. So, the behavior you are observing is expected. You can't use a PLAR line as if it was a regular phone line.
Your scenario has sparked my curiosity. In my experience, PLAR lines are usually added to common area phones outside of a secure area or something similar. It sounds like you are using PLAR as secondary lines on user stations. I may be mis-interpreting your scenario but I am inclined to think that you may be better served by using other UCM features. More information about your requirements would be needed to give you proper guidance.
If interested then please share more info. Otherwise, the answer to your original question concerning PLAR is that it doesn't work the way you want it too.
HTH
-Bill (@ucguerrilla)
http://ucguerrilla.com

ELM shows insufficient licenses after CUCM upgrade from 9 to 10.0.1

Hi All,
I just finished upgrading cucm 9 to cucm 10.0.1. Upgrade completed successfully, but elm now shows insufficient license message.
This is a Vmware installation BTW, I doubt that it matters the CUCM 901 worked fine with its ELM.
The ELM is coresident with CUCM. I though that upgrading CUCM will upgrade ELM too, but the Dashboard says to upgrade to latest version of ELM.
When I ordered upgrade through UCSS and downloaded all the files that were included in this upgrade order, one of the files was CiscoPrimeLM_64bitLnx_10.0.1.10000-19.sgn.iso.
I tried to use CUCM OS administration with this file to upgrade ELM, but OS Administration doesn't recognize it as a valid file.
The file that I used for CUCM upgrade was: UCSInstall_UCOS_10.0.1.10000-24.sgn.iso
So at this point I'm not sure whether ELM needs to be upgraded or I need new licenses for CUCM version 10.
Thanks
Yury Brodsky
Telecommunications Specialist
AudioCodes
27 Worlds Fair Drive
Somerset, NJ 08873
Direct: 732-652-2162
Fax: 732-469-2298
Email: [email protected]

Upgrading co-res CUCM should have upgraded your ELM as well. It should now show as Prime License Manager when you log in. I'm guessing you just don't have any CUWL 10.x licenses installed. Can you attach a screenshot of the License Usage page in PLM?
You may need to email [email protected] to move your 9.x licensing to 10.x licenses.

Cucm upgraded from 8.6 to 9.1 and now want to add uri dialing

Environment:
Upgraded 8.6.2 to 9.1
AD Sync users and authentication
Upgrade went well
I thought that with the upgrade the existing AD integration would bring over the Directory URI or give me the option to choose the Directory URI choices from the existing AD integration. I went to the existing LDAP Directory integration and I can't choose to sync Directory URI with MSRTCP... or email. I am forced to create a new LDAP directory so I can have the option to choose. Fair enough I said... I will create another one pointing to the same AD. I did that and then I was going to delete the old LDAP directory. It gives me a warning that all users that were created with this LDAP integration will be deleted. Yikes!!!
I'm stuck. Should I sync the new LDAP directory with the URI (which is pointed to the same AD as the old one) then delete the old LDAP Directory? Will my users stay intact?

I found a note in the documentation that expkained that MSRTCSIP... URI needs to be populated manualy or if the user was/is a Lync user it is populated automatically by Lync. Easy fix was add all users as Lync users then delete users as Lync users and then the AD attribute stays populated.

Converting CUCM user from local to LDAP synchronized

Hello.
I am trying to convert a few local users to users that have been synchronized with LDAP. When I am on the End user configuration page, I cannot seem to find anything that would relate to synchronizing with LDAP. Also, if I try to create them from scratch, it automatically creates them as local. Any thoughts?
Thanks.

Everything is definitely set up correctly. We were migrating from and older call manager to a new call manager, and were having some troubles with importing certain people, as the Ip phone field was getting blasted away in AD. To the people that was happening to, our consultant converted them to local users. Is there any way to simply reverse this, or do I have to resync LDAP and see if it works?

No audio from speakers on pavilion dm1z-3000

I'm getting no audio from the internal speakers on my pavilion dm1z-3000. Headphones work fine, haven't tried HDMI. I tried uninstalling the drivers and reinstalling the drivers I got off the HP website (sp51371.exe) with no luck. After installing drivers the audio worked for a few seconds, started stuttering, then quit completely. Thanks for any help!

As the previous poster noted... I would suggest updating your bios to latest version. From what i can tell that should be version F.03 SP 51519. Also check back in a week or two F.05 will release to hp.com as well.
In addition once you have confirmed you have F.03 bios you can try to run the troubleshooting tool located at the following URL. I have had success with this tool in the past.
http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows
Although I am an HP employee, I am speaking for myself and not for HP.”

CUCM Upgradign from cucm 7.1.3-3000-1 to cucm 8.6.2-2000-2

Similar Messages

Maybe you are looking for