CUIC field Answered on CallType vs Skillgroup reports

Hi,
Currently i have a UCCE 9.0 environment with CUIC 9.0, some of my reports are not matching and have a lot of diferences on the total number of answered Calls
For the CallType report which includes the calls for the 4 Pheripheral Skillgroups i have 109 Calls unther the "Answered" field
For the Peripheral Skillgroup report i have a total of 25 calls for the same 4 Pheripheral Skillgroups.
The definitions on the CUIC documentation are:
For the Peripheral Skill Group Historical All Fields report, Answered: The number of calls answered by agents associated with a skill group during the reporting interval. This value is set by the PG. The number of calls answered includes only handled calls and internal calls received. The value is incremented at the time the call is answered. Derived from: Skill_Group_Interval.CallsAnswered
For the Call Type Historical All Fields report, Answered: The total number of calls of this call type answered by agents in the interval. This field is applicable to both Unified ICM and Unified CCE with the following exception: if the call is answered by an agent on a standard ACD, this field is incremented only if the call was translation routed. Derived from: Call_Type_Interval.CallsAnswered.
For me there is a lot of difference between them, and for what i can see on the documentation i suppose that those numbers should be very close. I've tried by doing a direct query on the data source and it match with the reports. If this is not an interpretation poblem, what could be wrong?
Regards,

Hi Claudio,
How different are the numbers? If they are out by a lot I would suspect there might be multiple call types you might not be aware of which are routing to the same Skill Group (ie if you have 10 call types all routing to the same skill group and you are only aware of 5 of them then when you add up the calls answered across the 5 call types you might be missing the calls answered from the remaining 5 call types which make up all the calls answered by the skill group).
Maybe have a look at the Call_Type_SG_Interval which you can use to count calls answered per call type per skill group. This will at least confirm where all the calls are coming from which are hitting that skill group so you can make sure you are counting all the call types.
Cheers,
Nathan

Similar Messages

0CO_ITEM_TX field needs to appear in the report

Hi,
I have a report which gets data from MULTI PROVIDER in turn from DSO 0CCA_O09 CO-OM-CCA: Actual - Line Items. This DSO has the field 0CO_ITEM_TX - but when I try to drag it in from dso to multi provider screen it disappears in the data fields of dso.
This Info Object is marked as attribute only and it gets errors when it is activated by unchecking the attribute only..
Please let me know how to make this field available in multi provider for reporting?
Thanks in advance
Anil

Roberto,
When I uncheck it and try to activate it it gives me errors:
EXCEPTION CX_RSRV_SID_CREATION_ERROR occured (Program:CL_RSDRO_GET_SIDS_FOR_ODSO====CP, include:
CL_RSDRO_GET_SIDS_FOR_ODSO====CM004,
I do not know if I give aclear picture, but if you can provide me ur mail ID, I can send you the screen shot of it. Thanks

SOME FIELDS SHOULD NOT SHOWN IN THE REPORT

Hi,
this is to inform you that, there is a requriment in reporting perspective (ALV),
Requriment:
i have to generate a ALV report which is viewed by our CFO with one t.code, in that report suppose there are 10 fields.
That is a specific report if some body apart from my CFO uses the same tcode to generate the same report than it has to display only 5 fields.
if my CFO uses the same t.code all the 10 fields must be visible.
please help me how to do it.
regards,
balajia.

There are couple of ways to achieve this,
1) - Create 2 variants, 1 variant for CFO with all the fields & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
Eg: UserID -
Fields
CFO -
ALL ( report should display all the fields)
NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
Regards,
Reazuddin MD

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

Can't add database field or text object to a report (new and existing)

We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report. I get a prohibition symbol (circle with a backslash inside it) when I hover over the report. Has anyone encoutered something like this? Any suggestions? Thank you.

Do you have two monitors?
I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
Ian

How to create a New Field in Characteristic Listbox in FBlXN reports

Respected Members,
When we execute the tcodes FBl1n, FBl3n and FBl5n
output is generated.
In the layout under current header rows i have to add something but i am not getting how to add.
Finally through characteristics in current header rows ,we can add the fields in header part of this reports.
But problem is that in characteristic list box the field which is required is not present.
How to add the field in this characteristic list box.
Suppose for eg on the selection screen of the tcode fbl3n ,
i had selected the Radio Button ALL items and given the posting date from value and To value also.
Now i want this in output this posting date range should come in header part of each account details.
How to make it .
If i am possible to add the field posting date in the characteristic with the functionality then the task will be over.
Please give me your valuable answers as soon as poosible.
THanks a Lot.

Respected Members,
When we execute the tcodes FBl1n, FBl3n and FBl5n
output is generated.
In the layout under current header rows i have to add something but i am not getting how to add.
Finally through characteristics in current header rows ,we can add the fields in header part of this reports.
But problem is that in characteristic list box the field which is required is not present.
How to add the field in this characteristic list box.
Suppose for eg on the selection screen of the tcode fbl3n ,
i had selected the Radio Button ALL items and given the posting date from value and To value also.
Now i want this in output this posting date range should come in header part of each account details.
How to make it .
If i am possible to add the field posting date in the characteristic with the functionality then the task will be over.
Please give me your valuable answers as soon as poosible.
THanks a Lot.

Unable to print Remarks field from InBank book & Cash Book Reports

Hi,
for this bankbook and cashbook reports, we are using Financial Reports-> Accounting -> General Ledger
in this General Ledger Interface, "BP and Accounts" are two types. For both of modes, i am using same PLD Report.
I draged the Outgoing payment Remarks and Incoming Payment remarks on the Report, but i am unable to see the Remarks data on the report. when i drag the "Journal Remarks" field it is displaying on the report.
-How to bring the "Outgoing Payment and Incoming Payment Remarks " in General Ledger (Bank book & Cash Book)
- for bank book and cash book, General Ledger is the right Report or any other?
plz hep me asap. urgent.
Regards,
Nagababu

I don't think you would be able to add Outgoing payment Remarks and Incoming Payment Remarks to this template. They are neither available for display nor is the OVPM or ORCT tables available to be added as a table to the PLD.
Suda

Field filtering of FI-AA balance report by ALV grid

Hi, Gurus,
Here is very simple question for reporting program in FI-AA
Symptoms likes below,
Transaction : Impossible to filter " Asset class" field on several FI-AA standard reporting
Display option: ALV GRID ,
Field name : Asset class (ANLAV-ANLKL, Character)
Length of field : 8
Status : Asslet class criteria is already involved to their layout of report.
             Indivisual asset list and each asset class is successfully displayed.
             When set filter on asset class cuolumn, Possible entry list is displayed.
            But filnally after i determine value for filter asset class cretiera, result of execution is nothing to be displayed
As you konw, several standard reporting program is services in Fi-AA
For this reason , I guess this symptommay will be found on your coompany code
If you have any good idea or solution for this , Just let me know
I will appreciate your response in advance,
Regard

Try to write an * after the value of the class of the asset on the filter.
Bye

Want to hide a field in the last page of report

Hi All
I have an issue .. can anyone of the oracle techies give me a solution for this ..? pleeaassee
The issue is that let us say i have a report for 5 pages. I have placed a field on the margin of a report to display CONTINUE.. . Now we dont want this field to be displayed when the report is on the last page. We tried of setting property of the field Print on to All but last page but it is not accepting that
can anybody provide a solution for that ..?
Thanx in advance
Hari

The problem you're hitting is that the margin area is formatted before the body area in the report. Since this is the case, you don't know if you are on the last page since the body has yet to be printed when you print your "continue" column.
There are a several ways to accomplish what you want:
- Guess whether it is the last page and print based on your "guess"
Normally you'd use a running count along with a total count to see if you've printed the last instance of the repeating frame and are hence on the last page. Since your object is in the margin rather than the body, you'd need to estimate how many records will fit on the page and if there are less then these many records left then you shouldn't print the "continue" field.
This can be tricky to do if your frame is variable sized so you don't really know how many instances of the repeating frame will be on each page.
- Place the "continue" field in the body rather than the margin
To do this, you need to create a fixed sized frame that all your normal layout goes into. This should be sized to your typical page size. Then create the "continue" field after the fixed sized frame (you may need to re-size the body area - do this in "margin" mode). Set the print condition to "all pages" against the "continue" field so that it prints on every page. You can then use the running count/total count method to determine if the last repeating frame has been printed when you come to print your "continue" field.

How Do I add new fields to Repeating Frames in existing Report

Hi,
How do I add new fields to Repeating Frames in existing Report. The Report has 2 GRPFR, 1 HDR and 2 Repeating Frames. I would like to add a new field(column) to inner most repeating frame. I added the new golumn to QUERY and GROUPs in Data Model. After adding the new column to inner most Repeating Frame in Layout Model, the Layout model is losing all other frame and it is showing only the modified one.
How do I add new column to repeating frames without disturbeing other frames.
Any hellp will be appreciated!!!!!!!!!!!.
I am using Oracle Reports 6i.
Thanks,
Ravi.

you must work in your layour editor
expand your repeating frames do it more big
for add your new items or field. after you inserted or add, can you put more little your repeating.
too can you to do one copy of one field in your repeating frame and assign it in his source your new item in your data model.
normally i begin with the principal frame and go one by one internally.

How to have some fields in the header of the report

Hi All,
we would like to have some fields in the header of the report (every page but the first page), but Word won’t let you insert fields into the header. Are there any work arounds to do something like that?
Thanks,
Vandana

'Insert Menu -> Field' does not work for headers.
Try this. Say if you want to insert a XML tag named TRX_NUMBER in header. Put <?TRX_NUMBER?> in the header. This will display TRX_NUMBER tag in header.

Form on a report - using a field with search button to run report

I am trying to do a very simple report with a custom search field on the top of the form. I am looking at Denes Kubicek's example of Search form on table. Page 68. I want to have a region with the fields to search on, a button and then a report with the data.
I am having problems getting the report to run with the data. Is there an easy step by step guide to do this somewhere? Is there a 'trick'? I setup the branches (created by my buttom), the items, the button, the 2 regions (form on table ) and my report. I don't need the process search_empno as i don't have any hidden fields.
Is there a step by step explanation of how to create the search field and have it call the report? It's wonderful to have the examples but i'm not sure what i am missing
thanks
angie

user629851 wrote:
Robert
Thank you very much. I just went through the report wizard and it didn't ask me which field to query on? I wonder if that is only in certain versions? :(There is a little select box: "Enable Search" on one of the wizard pages. It defaults to NO. Set it to YES and the columns to search on are shown.
i think it is the wizard-page just after you add the query for the report.

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

BI Answers: Having blank text field as prompted filter, used by report.

Hi,
I need a prompted filter field, where a customer will enter a number, that will then be used by the report to calculate
a statistic within the report.
Is that beyond what the report can do?
Many thanks for any answers.
- Jenny

Mike,
Had you modified your syntax inside of the a href since the first time it worked and when it failed.
I always suggest testing in small increments.
The solution you have for linking to a website is the correct way to do it in Oracle BI 10g. I would suggest reducing the operations to something manageable to ensure that it is not the use of the HTML override but indeed something in your syntax,
Perhaps,
Test This is Working
and
then update the syntax to adjust the ID value and then the display test, etc.

CUIC-Total Answered Call in Peripheral Skill Group are different with Skill Group Abandon-Answer

Hi UCCE/CUIC Expert,
I have CUIC 9.1(1). Now I am trying to access Cisco Historical Report (Stock).
When I accessed Peripheral Skill Group Historical All Fields, I found total "Answered" are different when I produced using Skill Group Abandon-Answer Distribution Historical.
My question is:
- What kind of call will produce symptom above?
- Is there any miss step in ICM Script so that CUIC will produce this report?
Thanks in advance,
Heribertus

Hi
Some, but not all, Half_Hour tables now have an equivalent Interval table. The Half_Hour tables still appear in the database, but are no longer populated. For CUIC only (and not for WebView) the equivalent Interval tables are populated by either half-hour or fifteen-minute data, based on configuration. WebView uses “half-hour views” to pull 30-minute data from the Interval tables.
While configuring the PG, you will give whether the Reporting interval should for 15 minutes or 30 Minutes, If you have 15 minutes selected then will see 15 minutes Interval in the Agent_Skill_Group_Interval Table.
Regards,
Senthil

CUIC field Answered on CallType vs Skillgroup reports

Similar Messages

Maybe you are looking for