Cumulative amount in the same line item for the same account

Hi
I have an account which appears more than once in the same accounting document.Can I cumulate the amount in the same line item.
IF it's possible, please how can i do it.
Thanks in advance

Hi Maher,
Assumption:
You have an accounting document in which more than one line item is there with the different amount. All the other details of the line items are same.
Solution:
If you want to make it one line item, key the amounts as zero in other line items and add the value to a single line item.
Warm regards,
Murukan Arunachalam

Similar Messages

  • Same material can exist on multiple line items for the same order.

    Hi
    Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
    Regards

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • How user can get a Sales Text for the any Line Item in the Billing?

    Salute Masters ! !
    How user can get a Sales Text for the any Line Item in the Billing?
    It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
    Where I can configure in system for all.
    Rgds
    Srivastav
    09973504950

    Hi,
    Sales text can be copied from customer to order , order to delivery and delivery to billing .
    Check the T-code : VOTXN , do the customization as per your requirement.
    check the below link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

  • Line items for the PO are not automatically displayed

    Hi all,
    When attempting to post an invoice against PO, the line items for the PO are not automatically displayed. When we went to the Listing of PO's and brought this up, we noticed under the "invoice"tab that the: Invoice Receipt & GR-BsdIV is checked.
    need your help
    Thanks
    Fayaz

    Hi,
    Can you check delivery complete indicator in PO. It is in PO item details delivery tab.
    In MIRO transaction, select the  tab Purchase order/scheduling agreement, enter PO number and press enter.
    Right hand side select the layout all information .
    Regards,
    Chandra

  • Sample Material in the 3rd Line item of the Sales Order

    Hi,
    We have configured the system in the sales order as follows.
    1. Commercial Material
    2. Bonus Material.(ie Free Material)
    Now, i want to add the 3rd line item in the sales order as Sample with different Material number. How go about this. kindly let me.
    Regards
    Ravi

    Hi there,
    Enter the material in the sales order & change the item catg manually in VA02.
    But free goods & sample materials are dealt differently..
    Freegoods is entered as TANN item catg along with nornam TAN item in standard order OR.
    But sample materials or free of charge items are processed through different order type FD for eg.
    Even thought the item catg proposed in FD is TANN,, the whole process will not have pricing as TANN items arenot relevant for pricing.
    Regards,
    Sivanand

  • Final total cannot appear when the last line item reached the page end

    Hi All,
    My report included 2 pages. Problem is the final total cannot appear when the last line item reached the page end. (page 2)
    final total will appear on the middle of last page (page 3) when i comment (type    = 'BOTTOM').
    Below is the program.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          dialog   = 'X'
          form     = 'ZBOTM_VOUCHER'
          language = sy-langu.
      sort itab by vblnr.
      LOOP AT itab INTO wa_itab.
        move wa_itab-vblnr to reguh-vblnr.
        move wa_itab-lifnr to reguh-lifnr.
        move wa_itab-rbetr to reguh-rbetr.
        reguh-rbetr = reguh-rbetr * -1.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            window  = 'MAIN'
            element = 'DETAIL'.
        t_rbetr = reguh-rbetr + t_rbetr.
        AT LAST.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              window = 'LINE'.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              element = 'TOTAL'.
              type    = 'BOTTOM'
              WINDOW  = 'MAIN'.
        ENDAT.
    Thanks.

    Hi,
    Where should I include the code for bottom?
    How to open text editor?
    Thanks.
    Edited by: Alice8 on Feb 7, 2011 9:09 AM

  • Bapi to copy the PO line item below the existing PO line item

    Hi All,
    I am new to work on BAPI, Can any one help me out,
    Requirement is to copy the PO line item below the existing PO line item (Replicate the line item for returns purpose) . So is there any bapi to do this task.
    Thanks in Advance
    Pallavi
    Moderator Message: Please employ the SAP procedures to identify the right BADIs and Exits and help yourself.
    Edited by: kishan P on Nov 16, 2010 1:56 PM

    Hi,
    What i think is you should use two BAPI one is BAPI_PO_GET_DETAIL to fetch existing details of line items and then BAPI_PO_CHANGE to create s second one.
    Nabheet

  • How to handle the multiple line items in the Inbound idoc FM

    Hi ,
    Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
    Thanks in Advance,,,,
    Regards,
    Bharani

    Hi ,
    Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
    Thanks in Advance,,,,
    Regards,
    Bharani

  • Two PR Line items for the TAB Item category

    Hi,
    We have created a sales order with TAB item category.
    In MD04 we found two line items of the same firmed PR.
    Any idea why two lines of PR are generated?
    Regards,
    Vengat

    Hello Friend,
    Please check
    In Material Master MRP1 view check for the rounding value.If rounding value is 10 and order is for 30 then 3 line items of PR will generate.Hope it helps.

  • Amount spliting in 3 line items for single customer

    Hi All,
    Here i am facing one small issue  at the time of billing docment relesing  to finance.
    here i am getting 3 line items for single cumenter, custmoer debited in 3 line itmes.
    why i am geting 3 line items can any one help me in this issue.
    thanks
    kiran

    Hi,
    If you have new GL with document splitting active then if you have created billing for 3 items then system can split the customer line as well into 3 lines in GL view particularly if you have 3 items are getting credited to separate GL Accounts as sales revenue.
    In Classic GL view you will not see customer line getting split. Hoep it helps you.
    Regards,
    Sanjay

  • Separate line item for taxes in accounting document of MIGO

    All SAP Gurus,
    As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
    Similarly is it possible to have separate line item for tax amount which is inventoried.
    Regards,

    Hi Rajan,
    Freight is from pricing procedure whereas tax is from taxing procedure.
    Tax cannot be shown in separate g/l in MIGO.
    Reason:
    If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
    I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
    U can also try doing the same and then check.
    Reg
    Raja

  • How could i enter 100 materials in the single line item in the repair order

    Hello SD Guru's
    The below requirement is related repair process.Can you please suggest how i can go head.
    I have a one requirement related to repair process in SAP SD. As of now the the repair order creating for only one material in the single line item. But the requirment is if they returned morethan 100 material from same customer, how to process that in systme prospective and standard SAP.
    The standard SAP working based on single material  for each line item so that the repair indicatior is triggered for that single material only. So how cound i enter multiple materials in the single line item and how could i create 100 materilals in the sigle line item and how could the repair indicatior triggered for that line item which is having 100 materials
    Thanks in advnce
    Thanks
    KV

    Hello Chakrapani,
    Thankyou for your quick responce.
    How it could be possible if it is possible in SAP.
    Can you please suggest how can we achive in this scenario.
    Thanks & Regards,
    KV

  • Multiple line items for the same POs in MD04

    Hi,
    There is Purchase Order created for a material with other 5 line items.
    When checking MD04 for a material it is showing multiple records with the same Purchase Order and the corresponding item number in the Purchase Order correctly, but with different quantities in each line in MD04 randomly.
    I am unable to understand the reason for this strange behaviour.
    Thanks
    Ramakanth
    Edited by: Ramakanth Y. on Jan 20, 2009 4:04 PM

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • Blocking somw of the retention line items for processing

    Hi all,
    My client wants a list of retention line items to be blocked from further processing and the same to be released on a case to case basis, only on approval .
    How should i proceed?
    regards
    Jaya

    Dear:
             First go to SPRO....Financail Accounting....Select Vendor...Master Data...Preparation for creating master data...Define A/c Group with Screen Layout....Select your relevant account group....Go to company code data...Payment transactions... Here you can maintain the field status of Payment block. After that
    Go to OB32 . There you will find BSEG-ZLSPR payment block field. Double click it and check it for field can be changed. I hope this will resolve your issue.
    Regards
    Edited by: Atif Farooq on Mar 2, 2011 4:26 PM

  • How to find out the PO line items for which no GRN has been done

    Dear Friends,
    I need a report which will show all the fully open PO items for which no GRN has been done.
    In ME2N when I give the selection parameter "open goods receipt" then it shows all the line items with partially & fully open. But my requirement is to get a report of only fully open items.
    Regards
    Rutabhadra Panda

    Hi Friends,
    Thanks a lot for your reply.
    But this is a report which projects the expected GRNs & does not depend whether partial or full.
    Is there any other way out?
    Can  I download from the table directly.
    Regards
    Rutabhadra Panda

Maybe you are looking for

  • How to do Free of Charge Goods

    Hi Folks, In SRM is there a way to create Free of Charge goods Purchase orders? SRM Does allow to creat SC for $0 and get stuck at Purchase order processing. As R/3 has check box Free of Charge flag at Purchase order line item. I could not find it at

  • Installing OS X on a USB hard drive?

    Hi all, Is it possible to install OS X on a USB drive? I am attempting to do so with a drive hooked up to an iBook, but not having any luck - the installer says it cannot be installed to the drive. I know that this is possible with Firewire, but what

  • Why is FF 15 the only browser Adobe Muse seems to have issues with?

    For some reason you get a blank page when you click on "Resume PDF" Works on every other browser. Adobe says the error is on FF's end. Help?

  • Parameters to be mapped for connection spec in JCA connection

    Hi,     Anyone please let me know the parameters(exact Keys) to be mapped in connection spec of JCA. I am using JNDI to get connection to backend system. Here is the code which i am using. ctx = new InitialContext(); connectionFactory = (IConnectionF

  • PDA (Pocke PC) - Serial Write Timeout

    Hello List, I am developing serial routines to communicate with external hardware. In many cases, XON/XOFF flow control is used. I have configured my PDA device to write out a large file. During the transmission, I use my development computer to moni