Separate line item for taxes in accounting document of MIGO

All SAP Gurus,
As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
Similarly is it possible to have separate line item for tax amount which is inventoried.
Regards,

Hi Rajan,
Freight is from pricing procedure whereas tax is from taxing procedure.
Tax cannot be shown in separate g/l in MIGO.
Reason:
If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
U can also try doing the same and then check.
Reg
Raja

Similar Messages

  • Separate line item for each invoice in payment document

    Dear Experts,
    while making payment for a vendor through F-58 for multiple invoices, the system grouping the invoices on Business Area basis and giving the line items.
    For example there are 2 invoices for 5000 and 6000 in one BA and another 2 for 4000 and 9000 in second BA, the system is generating the entry as follows
    Vendor  A/c Dr   BA1  11000
    Vendor A/c  Dr   BA2  13000
    Bank    A/c  Cr            24000
    I want the system to generate separate line item for each invoice instead of 2. How do i do it?
    But this is not happening when i am making partial payment and in that case it is generating 4 line items.
    regards
    Suresh

    Thanks for the reply
    Checked it but still it is working in the same way.
    It is a requirement for the client, is there anyway to do it?
    Regards
    Suresh

  • Seperate Line item for taxes in MIGO and MIRO

    All SAP Gurus,
    We want to inventories the CST (central sales tax) amount.
    For this we have used the condition type JIPS, check marked the accounting key 'JI7' and gave posting indicator as '2' Separate line item.
    Now, CST amount is getting inventorised at the time of GR. (but no separate line item is created at the time of GR).
    During MIRO, the inventoried CST amount is getting deinventorised (although separate line item being created here).
    Can we have separate line item in MIRO, without getting value deinventorised? (as it happens for freight)
    Regards,

    Hi Kunal,
    Thanks for the reply.
    As you have rightly said, we need to tick 'NOT DEDUCTIBLE' in OBCN (we have already did that).
    And key has been already assigned in Atx procedure for the appropriate condition type.
    But the problem is that, we want separate line item for this tax amount in MIGO.
    Is it possible to have separate line item for the tax amount in MIGO (as we can get separate line item for freight in MIGO).
    Regards,

  • Double line Item For Tax

    Hi SAP Gurus,
    I have a issue related to invoice verification.
    We have following tax procedure
           Basic Price  + Excise + Frieght + VAT  = Gross Price
    But here frieght is taxable on which VAT is caluculated.
    But while doing MIRO system is showing two line items  for Tax condition (VAT)
    1. One line item VAT amt calculated on   (Basic price + Excise duty)
    2. Second line item VAT amt calculated on (Frieght amt.)
    I have maintained single line item in OBCN.
    My client want to have single line item.
    Pls tell me how to solve this.
    Regards
    Gitesh

    Hi
    DCGR means freight GR. System automatically creates this at the time of MIGO, if freight condition is mentioned in PO itself.
    Hence in MIGO creation systems creates one material GR and with the same number one DCGR.
    You can see it from purchase order history through PO.

  • FB60 - Two line items for tax amount (Posting Key - 50)

    Hi,
    I am facing some issue in FB60 invoice posting. For the same vendor(say V1) I am posting 2 different invoices for 100 USD - the <u>company code, G/L, CostCenter & Tax Jursdiction code are different</u> in both the cases. Once I do FB60 and got to document overview screen this is what I see...
    <b>Case1</b> - in the document overview screen I see a Posting key(PK) 31(invoice amount), PK50(tax amount) & PK40(total amount)...which is fine.
    <b>Case2</b> - in second case the document overview shows two line items for PK50(credit - tax amount) and tax amount is different.
    Two questions...
    1) Why there are two tax items (PK50 items) - is that dependent on tax rule or vendor or company code?
    2)My client says the tax amount should be same in both cases - but I am wondering how can it be, when tax codes are different in both the cases? Where can I check how these tax values are getting calculated.
    Any adivse/hints will be greatly appreciated/rewarded.
    Thanks
    Kiran

    AKu
      I got the same scenario also
      this second document display because of material price change u can double click that document

  • PRRW - Displaying separate line items for separate Wage Type / tax Code

    Hi ,
    In the Travel trip PR05 after the trip is setteled, the trip no. need to run with the Posting run through Tcode: PRFI. Then we need to Run the Created Document using the Tcode: PRRW. My Requirement is that for some WAGE TYPE which are assigned with the Expense type which are assigned to the Same GL Account. While posting in FI we need to get the Different line items history for diffrent Expense type even though the expense type are assigned for the same Account Number.
    For Eg:
    EXPENSE TYPE: BUSB settelment amount -1.53
    BUSL settelment amount -2.67
    VERM settelment amount 50.00
    After Posting i need to get as Same Doc Number with different line items in the FBL1N while posting.
    I found the BADI for the same TRIP_POST_FI, but to get the soultion to my requirement i need the help on that.
    Please provide me with the sample code so that i can get over the issue.
    Best Regards
    Bhavana

    could u please share on how u found the resolution for this.
    It will be a great help.
    thank you,

  • Tracing the line item change in a accounting document

    We have to send accounting document line items details which have been created or changed to non-SAP system.
    I am looking for way to identify the line items which have been changed as I don't want to send the other line items of the accounting documents which are not changed.
    Thanks.

    Shailendra,
    You've hit the nail on the head - CDHDR and CDPOS are the central repository tables that contain all changes - wherever logged.
    There's no other way.
    P.S.: I'm assuming you know how to extract data from these tables - so am not going into it.
    Remember to assign points if found useful.
    Regards
    Gulshan

  • Maintain separate line item for discount-Urgent response will be appreciate

    Hi SD Gurus,
    I need to apply a separate credit line item on a invoice to reduce the net amount billed against that invoice.The scenarios is Engineer-To-Order.The billing document is order relevant only.So pls help me on this.whether I have to create new material for discount or what can i do ?
    Thanks
    Hari Challa.

    Hi,
    Can you explain the scenario with a suitable example ?
    Regards,
    Amrish Purohit

  • Maximum no of Line items for sales order,delivery document and billing docu

    Dear friends,
    How many line items we can enter for the following,
    1) a Sales order
    2) a Delivery document
    3) a Billing Document
    Thanks in advance.
    Regards,
    Shrikant

    Hello,
    the maximum limit of line items are as follows
    order-9999
    for delivery and invocie , it is restricted to 999 accouitng line items. since the tranfer to accounting can handle only 999 items , the restriction on delivery and invocie
    ex if there are excise postings, for a single line , there might be 5/6 lines genetrated for each line in invocie , therfore as per this the line in invocie get restricted
    you have a sap note , which offers suggestions to partially over come this
    hope this helps
    Thanks
    akasha

  • Cumulative amount in the same line item for the same account

    Hi
    I have an account which appears more than once in the same accounting document.Can I cumulate the amount in the same line item.
    IF it's possible, please how can i do it.
    Thanks in advance

    Hi Maher,
    Assumption:
    You have an accounting document in which more than one line item is there with the different amount. All the other details of the line items are same.
    Solution:
    If you want to make it one line item, key the amounts as zero in other line items and add the value to a single line item.
    Warm regards,
    Murukan Arunachalam

  • CST SEPARATE LINE ITEM

    Hi all,
    Is it possible to get CST as a separate line item in MIGO.
    Please let me know why is this happening!!
    I'm raising a PO for say 1000 tons and now Im capturing excise invoice for half the quantity i.e. 500 tons. Excise invoice has BED, CESS, SHECESS & CST. Here CST is getting inventorized.
    While doing MIGO
    1. Im entering the reference PO number
    2. Im entering the required details and referring the excise invoice number
    3. Reducing the quantity by half and posting the document.
    Now in the material document when I see the CST amount that got inventorised it is observed that CST amount is getting reduced by half again. i.e.
    -On 1000 tons my CST is Rs. 1000/-
    -In J1IEX I have captured for 500 tons and my CST is getting captured as Rs. 500/-
    -Now in MIGO as Im reducing the quantity to 500 tons (as the qty in PO is 1000 tons)
    -After posting the document value is "material value + Rs. 250 (CST got reduced again by half)"
    The difference is getting loaded on to material during MIRO.
    I'm not able to understand why is this happening. Can anyone give some input on this.
    Regards
    Ayyallas

    hi
    if u need it as separate line item then use NAV  account key against your cst conition (now it must be NVV ) in your tax procedure (t code OBYZ)
    The difference between NAV & NVV is in the Posting indicator
    NAV key has Posting Indicator - 2 Separate line item
    & NVV Has Distribute to relevant expense/revenue items
    regards
    kunal

  • How to inventorise CST with a separate line item during GRN

    Dear All,
    Please could anybody tell me how to post the CST to a diff GL during the accounting entries in MIGO.
    I have a tax code where there is ED, Cess,Secess & CST(Which is inventorised). Now the CST is getting added to material cost during GRN. There is no separate line item for CST. But my client wants the CST will be inventorised but it should be posted to a different GL in MIGO.
    Waiting for your kind reply,
    R Panda

    hi,
    its a standard SAP functionality.
    u cannot find diif line item for CST.
    regards,
    sujit

  • Get Open Items for GL Reconciliation account for Customers

    Hi All
    We have a difference on our AR to GL reconciliation, we are unable to view all postings to the GL account using Tcodes FBL3N or FS10N ?  - the function is not available on that GL account.
    how do we compare the open items on customer accounts to the postings in the GL reconciliation account if we can not get a line item report ?
    Thanks in advance for any assistance
    Dylan

    Hi,
    Generally for recon accounts, the indicator Lina item display will set to off. So you will not get line items for your recon account in FBL3N report. But still you can get the GL balances in FS10N for that recon accounts.
    If you want to see the line items also for that recon account, then go to master data of that GL and select Line item display option  and block the account in company code for postings temporarly.
    Now run report RFSEPA01 in SE38 for you recon GL account.
    Again go to GL master and unblock the blocking indicator.
    Now check the line items in FBL3N for that recon account.
    Thanks,
    Srinu

  • Display Variance line items for Orders

    Hello Sapients,
    I am trying to execute Transaction code KOB3 (Display Variance line items for Orders) ( /n > Accounting> Controlling > Product Cost Controlling > Cost Object Controlling > Product Cost by Order > Information System > Reports for Product Cost by Order > Line Items > KOB3 )
    But for some reason I do not see any thing.
    Your Advise is greatly appreciated.
    Thanks and Regards
    Ravi

    There is no problem with Authorization.
    And i am checking for the correct cost elements and prorcess orders.
    Not only KOB3 but also the related reports are not working (viz: GR55-> 7KV9)
    thanks and Regards
    Ravi

  • G/L account item without tax code in document with deferred taxes

    Hi ,
    While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
    Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
    Please guide what could be the problem in the Discount Condition?
    Thanks and Best Regards

    whats this Z condition type. Is it  a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
    Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check  whats the GL Account assigned to this Account key (VKOA).
    Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
    Hope this helps
    Regards
    Sai

Maybe you are looking for