Cumulative values: difference between 3.5 and 7.0

Hi everybody,
I use queries which display an Amount on month.
JAN FEB MAR APR
A1 A2 A3 A4
I modify the Key Figure property to have cumulated values
JAN FEB   MAR      APR
A1 A1A2 A1A2A3 A1A2A3A4
In Bex 7.0, all is right i have my cumulated values
In Bex 3.5, it doesn't work ...
i have the following result:
JAN FEB MAR APR
1   3   6   10   ...
as if i had:
JAN=>Amount=1   JAN-> 1
FEB=>Amount=2   FEB-> 1+2 =3
MAR=>Amount=3   MAR-> 123 = 6
Why this difference between 3.5 and 7 ?
I would like the right result in 3.5,
How do i proceed ?
Thanks for your help!
Rodolphe.

Appararently,
On Bex 3.5 ...
I remplace for my KeyFigure:
Calculate Single Values As ...
"Counting All values" by "Nothing"
and option cumulated activated.
and it does work !!
Rodolphe.

Similar Messages

Difference between Snapshot scenario and non cumulative scenario

Hi,
Can any one please tell me the difference between snapshot scenario and non cumulative scenario in
inventory management.
Also please give example. I read the pdf " how to handle inventroy management scenarios", but can any one please give some easy to understand examples.
full points guaranteed-

hi,
In Non-cummulative method your stock movements are stored in the cube (inflow and outflow of NC KF) and the Total stock is calculated during query execution. Hence if there are lot of movements in the stock for the period you want to report on, query will take long time to execute.
In case of Snap shot scenario Stock movements are not loaded to cube. you use ODS to load the status of the stock and then from ODS you can load to Cube once in a month. So only summarized data will be availabe in Cube. Reporting will be fast.
Check the below threads
Inventory Management - SnapShot model
snapshot scenario?
SNAP SHOT Scenario in IM

Difference between parent currency and parent in value dimension

Hi
Dear friends please tell me about following:
1.Difference between <Parent Currency> and <Parent> in value dimension and its significance.
2.Difference between <Parent Currency Adjs.> and <Parent Adjs.> in value dimension and its significance.
Thanks
Mayank
Edited by: mayanka bhusan on Jun 17, 2010 10:08 PM

When you have an entity which contributes to two or more parent entities, you can specify if an adjustment applies and contributes to all parent entities or the selected entity.
1. Create the adjustment to <Parent Curr Adjs> and the adjustment value contributes to all parents.
2. Create the adjustment to [Parent Adjs] and you can select which parent entity you want the adjustment value to contribute to.
<Parent Currency> is where the translation happens.
<Parent Curr Total> is the total of the translated value plus any adjustments applying to all parents -i.e. <Parent Curr Adjs>
[Parent] simply carries the <Parent Curr Total> numbers to the next level of the value hierarchy
[Parent Total] is the total of the previous level plus any adjustments applying to the specified parent -i.e. [Parent Adjs]

Report - quantity and value difference between delivery and invoice?

Hello experts,
My client use u201EProof of deliveryu201D t-code: VLPOD. There is always quantity and value difference between delivery and invoice.
Do you know any report which will show this differences between delivery and invoice?
Best regards,
Maciej

Hi,
Note 867678 - Proof of delivery (POD), delivery and billing document will help you to understand POD flow.
You have the tcode VLPODF/VLPODL/VLPODA, but perhaps they will not help you. So, as the before note suggests you, you can use the tables VBFA, LIKP, LIPS, VBRK, VBRP, TVPOD and TVPODG to do your own report.
I hope this helps you
Regard,
Eduardo

Difference between ATP qty and cumulative ATP qty

Can anyone advise what's the difference between ATP qty and cumulative ATP qty with examples?
Thanks
Peter

Hi Peter,
ATP quantity
The quantity available to MRP for new sales orders.
The ATP (Available-to-promise) quantity is calculated according to the following formula:
ATP quantity = warehouse stock + planned receipts - planned issues.
Please go through this link you can able to have idea on cumulative ATP
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55ff72545a11d1a7020000e829fd11/frameset.htm
I hope it will help you,
Regards,
Murali.

Difference between hierarchy node and single value

Hi experts,
Can anyone explain me the difference between hierarchy node and single value?
This is my problem:
I have a query that uses a characteristic (0ORGUNIT) with a hierarchy and I execute it without any problem but when I try to set a fliter on this characteristic and I try to find a single value, for example 101, it doesn't appear in the single value list, instead it appears in the hierarchy nodes list in the selection window.
I think I'm confused about both terms because I thought a hierarchy node was always the one who has one or more values as its lower levels like this:
A. 10
    A1. 100
    A2. 101
    A3. 102
         A3.1. 1021
B. 11
I this case I thought , for example, 101 was a single value but not a hierarchy node so I must find it in the single values list in the selection window, however, 102 can be both and must appear in both lists, is it true?
Thanks in advanced

In BW, hierarchy node with more information compare to the single value. for example, it always carries its father node information, which it belongs to. and some time information if it is time-dependent.
So, when you using hierarchy node, it means at least 2 information: value and "position" (who is its father node)
That's the reason why you see the hierarchy tree when choosing the node.
If you want to expand the hierarchy to the certain level, you can setting in the property. Another choice is restrict in the query designer.

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

Difference between Key figure and a Key field?

Difference between Key figure and a Key field?
Thanks,
Pramod

Hi,
Key fileds as just like your primary key of R/3 Tables.
Key figure are type of info object which is used to hold amout,value for your info providers..
check this link for key figures and there types...
http://help.sap.com/saphelp_bw31/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
under "Tab Page: Aggregation". you can be able to find three aggregation options:
Minimum
Maximum
Sum
Types of non-cumulative keyfigures
Regards,
Viren.

What is difference between tax procedure and pricing procedure?

Dear Gurus,
Would you please let me know the difference between tax procedure and pricing procedure?
Why it is necessary to maintain them separately?
Thanks in advance,
Ranjan

Hi
Tax procedure settings
OBBG - Assign Country to calculation procedure.
OBCO - Specify structure for Tax Jurisdiction code. For country like U.S.A.
LG -> character length of first level of hierarchy within your tax jurisdiction code structure.
LG -> Second level of hierarchy as above.
LG -> Third level of hierarchy as above.
LG -> Fourth level of hierarchy as above.
TX -> Tick if you want the system to determine taxes on a line by line basis instead of determining them on a cumulative basis
per tax jurisdiction code.
OBCP - Define Tax Jurisdiction code
Dil -> Tick if you do not want tax amounts included in the based amount used for calculating cash discounts.
Txl -> Tick if you want the cash discount amount deducted from the base amount that is used to calculate taxes.
FTXP - Define Taxes on Sales/Purchases Code.
OBCL - Allow Tax codes for non-taxable transactions.
In MM module, pricing procedure is used during RFQ and PO creation. Total value of material based on all addition and subtraction like discount, surcharge, tax, freight, etc. In this we are defining pricing procedure and linking to vendor and purchase department through the virtual schemas.
Following steps for pricing procedure as,
1. Define conditions.
2. Define pricing procedure.
3. Define virtual purchase organization and vendor.
4. Info Record.
Regards,
Raman

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

What is difference between u2018credit exposureu2019 and u2018credit limitu2019?

Hi
What is difference between u2018credit exposureu2019 and u2018credit limitu2019?
What transaction I can used for to see these tow information?
best regard
francoise

Credit exposure is total AR and open sales values. Credit limit is used for block sales documents if the total exposure will exceed the credit limit. For Example:
Credit Limit : 600
   Open AR ( Customer Balance) : 100
   Customer Open Orders (Order Quantity have been confirmed, but no delivery document is created) : 100
   Open Delivery (Delivery has been created, but no billing ) : 100
   Open Billing (Billing is created, but has not release to Financial Accounting): 100
So far, the credit exposure is 400. If a new sales order is coming with value of 260, the sales order will be blocked, but the credit exposure is still 400.
Then if someone release the new sales order , then the credit exposure is 660.
Hope this is useful for you.
Flex Yang

What is difference between local variable and property node ?

What is difference between local variable and property node ?
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
- Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
- Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Race condition.vi ‏9 KB
Compare Locals Properties and Wires.vi ‏18 KB

What is difference between Shared ,Exclusive and Exclusive but not commulat

what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
briefly :
You can lock the table or record by using following types of locking:
1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
Activation of Lock Object
1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
Thanks
Seshu

Cumulative values: difference between 3.5 and 7.0

Similar Messages

Maybe you are looking for