Difference between ATP qty and cumulative ATP qty

Can anyone advise what's the difference between ATP qty and cumulative ATP qty with examples?
Thanks
Peter

Hi Peter,
ATP quantity
The quantity available to MRP for new sales orders.
The ATP (Available-to-promise) quantity is calculated according to the following formula:
ATP quantity = warehouse stock + planned receipts - planned issues.
Please go through this link you can able to have idea on cumulative ATP
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55ff72545a11d1a7020000e829fd11/frameset.htm
I hope it will help you,
Regards,
Murali.

Similar Messages

Difference between Snapshot scenario and non cumulative scenario

Hi,
Can any one please tell me the difference between snapshot scenario and non cumulative scenario in
inventory management.
Also please give example. I read the pdf " how to handle inventroy management scenarios", but can any one please give some easy to understand examples.
full points guaranteed-

hi,
In Non-cummulative method your stock movements are stored in the cube (inflow and outflow of NC KF) and the Total stock is calculated during query execution. Hence if there are lot of movements in the stock for the period you want to report on, query will take long time to execute.
In case of Snap shot scenario Stock movements are not loaded to cube. you use ODS to load the status of the stock and then from ODS you can load to Cube once in a month. So only summarized data will be availabe in Cube. Reporting will be fast.
Check the below threads
Inventory Management - SnapShot model
snapshot scenario?
SNAP SHOT Scenario in IM

Cumulative values: difference between 3.5 and 7.0

Hi everybody,
I use queries which display an Amount on month.
JAN FEB MAR APR
A1 A2 A3 A4
I modify the Key Figure property to have cumulated values
JAN FEB   MAR      APR
A1 A1A2 A1A2A3 A1A2A3A4
In Bex 7.0, all is right i have my cumulated values
In Bex 3.5, it doesn't work ...
i have the following result:
JAN FEB MAR APR
1   3   6   10   ...
as if i had:
JAN=>Amount=1   JAN-> 1
FEB=>Amount=2   FEB-> 1+2 =3
MAR=>Amount=3   MAR-> 123 = 6
Why this difference between 3.5 and 7 ?
I would like the right result in 3.5,
How do i proceed ?
Thanks for your help!
Rodolphe.

Appararently,
On Bex 3.5 ...
I remplace for my KeyFigure:
Calculate Single Values As ...
"Counting All values" by "Nothing"
and option cumulated activated.
and it does work !!
Rodolphe.

What is the exact difference between Purchse order and purchase requisition

Hi all,
What is the exact difference between Purchse order and purchase requisition.
Thx

Hi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam.

Difference between fields MENGE and MNGLG

Hi All,
Can any one explain me the difference between fields MENGE and MNGLG ( both are Component Qty).
I need to know this we are developing a report based on
CS12, CS13…and which one I need to consider.
Thanks for the help

Hi,
MNGLG field gives the calculated component quantity based on your input required quantity EMENG. The value of which will match with the production order. ( no rounding off )
EMENG is the quantity of the parent product that you want to produce and then the function module will return you with the quantities of each of the components required to make this quantity of the parent product. The fields MNGLG, MNGKO will give you the required component quantity in base unit of measure and component unit of measure(as per the BOM).
Regards,
Narresh

Difference between Restricted KeyFigure and Filter

Hi Experts
Could anyone tell me what is the main difference between Restricted Keyfigure and Filter.. Normally in which scenario we will use Restricted Key Figure and when we will use in Filter...
Thanks
Ajay

Restricted Key Figure
In your sales analysis report you have customer,material,sales qty,value for an year..You want to show current month sales one more column.You will create a restritcted key figure based on the current month and show it in the report.You will end up with a report
customer,material,sales qty,value,Current Month Qty,Current Month value.
Filters
The above report you want to show only the current month sales.You will create a filter where the 0CALMONTH = current Month with customer,material,sales qtym,value for the current month only.
Regs
Gopi

Difference between delivery related and order related billing

Hello Friends,
Kindly explain the difference between delivery related and order related billing with an example. Thanks

The billing relevance is controlled by item category of material, which u have assigned to sales document type.
For example
1.item category TAN
Billing relevance is A- Standard-Delivery-related billing document
So in standard order of material which has to get delivered, we will bill it on its delivery. So billing relevance is delivery related billing.
2.BVN
In cash sales item category is BVN whose billing relevance is Relevant for order-related billing - status acc.to order qty.
So here we will bill the customer from sales order only, no need to go to delivery.
DONT FORGT TO REWARD POINTS IF THIS ANSWER SATISFIES YOU.
Thanks
Tushar
SAP SD, SAP BI
09822984340

Difference between incomplete order and backorder processing

What is the difference between incomplete order and backorder processing.

Hi,
Incomplete order is an order in which all the fileds(To which the Incompletion procedure is assigned) are not filled before saving the sales order.Using backorder processing, you can list sales documents relevant for requirements for particular materials and confirm them manually. You can assign available-to-promise (ATP) stock to outstanding order quantities. In addition, you can withdraw already confirmed quantities and reassign them to different items. This means If the stock of a material has been confirmed to a particular order or delivery, and after that you have recieved an order which ahs to be delivered immediately , then you can change the stock allottment of the previous order to this new order using back order processing. The transaction code for this is "V_RA". Transaction code to see which incompletion procedure is assigned to your sales order type is "VUA2" And to see the Incompletion procedure itself is "OVA2". Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

What is difference between additive delta and new status for change record

Hi Experts
Can any one explain me about the difference between additive delta and new status for change record with example
if any one has a document please post it iam thank full to u
thanks
Ahmed
Please search the forum before posting a thread
Edited by: Pravender on Feb 12, 2012 1:54 PM

Hi
Additive delta --- We will get the changed quantity.
say suppose you have sales order and quantity like 1111 30 which is loaded to cube(BW).
now same record qty has changed from 30 to 40. As we have additive delta, we will get new record as 1111 10.
new status for change record: This is same as like After image delta type in standard SAP data sources. for every change in record you should have new record.
say if you have any number which will be generated by system for new/changed record, then you can use this.
You can use this option when delta option set to "numeric pointer"
Regards,
Venkatesh

Difference between SNP PDS and PPDS PDS

HI Experts.
Can you tell the major differences between SNP PDS and PPDS PDS.
Thanks
Raja kiran R

Hi Raja,
Unlike PPDS planning (time-continuous planning), the least time bucket in SNP planning (bucket oriented planning) is a day, not seconds. Which is why the duration of individual activities in SNP PDS are planned in days only. Scheduling in SNP is based on the fixed duration of an activity and not based on order quantity or capacity load. If a plan contains 3 activities each with fixed duration of 1 day, then the SNP planned order will have duration of 3 days.
On the other hand in PPDS, the duration of an acitivity is calculated based on the resource load that generates the order quanitity, which means larger the qty to be produced, the longer the duration of the activity.
Hope this helps!
Regards,
Umesh

Difference between open quantity and delivery quantity

Hi all,
Please anybody explain me the difference between open quantity and delivery quantity My question is both are same in the value or different I need to report these 2 fields based on date.
open quantity is available in table vbbe
delivery quantity available in table lips.
for open quantity i have one select statement.
for delivery quantity i have another select statement.
i want to club these 2 fields into a single report.
please clarify my doubt.
regards
chandu

Hi,
Open quantity is nothing but the quantity which we have at the DAY starts.
Delivered quantity means which was delivered on that DAY.
So Opening qty - Delivered qty = Closing qty for a DAY.
Again this Closing qty will be the Opening qty for next DAY.
I think based on POSNR u need to club both the quantity in single report.
select vbeln posnr matnr omeng mbdat into itab from VBBE where....
select vbeln posnr matnr lfimg mbdat into itab1 from lips where....
loop at itab.
read table itab1 with key....
move:....to itab2.
endloop.
Thanks.
I hope this will help you.
Message was edited by: Deepak333 k
Message was edited by: Deepak333 k

Difference between HA00/HB00 and RA00/RB00

Dear Gurus,
I am bit confused on this , please give me some idea about the difference between HA00/HB00 and RA00/RB00 when both are manual discount condition types. Earlier also it was discussed in forum, i have gone through many links available in google but still not clear about it. please help.
Regards
Arunava

Hi,
First of all HA00 and HB00 both is Header Condition Type.
Both will use for the calculating Discount or Surcharge.
Both are header condition type, Dosen't have Acess Sequence. So, manual price entry will be possible.
The difference is...
HA00 is Percentage (%) Condition Type.
Means Discount or surcharge will calculate based on %.
HB00 is fixed value condition type.
Means discount or surcharge will calculate based on fixed amount.
RA00 and RB00 have the same functionality as like HA00/HB00.
This both has similar functionality, but not same.
Both is header condition but the amount we charge as a header will distribute differently from HA00/HB00.
HA00&HB00 will distribute header charge base on quantity.
Ex - sales order have 3 line items. (Hb00 - 100, means for 6000 qty charge is 100)
     Qty     HB00
A - 1000    16.67
B - 2000    33.33
C - 3000    50.00
Where as RA00 and RB00 Amount distribution will be different.
It will Distribute same charge to all items.
(Ex - RB00 -100)
So, it will be same for all qty A - 100, B - 200, C - 100 at line item level.
Apart from this many corrections are there. Kindly once ready condition type control. Once you clear with all control, you will be able to identify the difference by seeing the condition type control.

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

What is difference between Shared ,Exclusive and Exclusive but not commulat

what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
briefly :
You can lock the table or record by using following types of locking:
1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
Activation of Lock Object
1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
Thanks
Seshu

Differences between 11.x and 9.x??

Hi Frndz,
Could any one gimme differences between 11.x and 9.x systems?
Thanks

Have a look at the cumulative feature tool - https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
It will allow you to pick the versions and see the new features within each version by product
Cheers
John
http://john-goodwin.blogspot.com/

Difference between ATP qty and cumulative ATP qty

Similar Messages

Maybe you are looking for