CUP 5.2 - LDAP Authentication error - "User credentials not valid."

Hi Experts ,
I have set up LDAP "SUN ONE" as a authentication source for our CUP 5.2 SP11 Patch1 (Build-62316). But when I try to logon with my network id,I receive error "User credentials not valid."
Please find the log below.
Thank you for your help,
Regards,
Abderrahim
2011-03-01 12:07:57,232 [SAPEngine_Application_Thread[impl:3]_27] ERROR Failed to log in a867168
com.virsa.ae.service.umi.AuthenticationFailureException: No user details found
     at com.virsa.ae.service.umi.ldap.LDAPAuthenticator.validate(LDAPAuthenticator.java:140)
     at com.virsa.ae.actions.LoginAction.requestorLoginHandler(LoginAction.java:847)
     at com.virsa.ae.actions.LoginAction.execute(LoginAction.java:82)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:256)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:423)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by:
com.virsa.ae.service.umi.UMIException: SUNONE error reading search results
     at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUsers(LDAPSearchUser.java:698)
     at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUserById(LDAPSearchUser.java:760)
     at com.virsa.ae.service.umi.ldap.LDAPAuthenticator.validate(LDAPAuthenticator.java:131)
     at com.virsa.ae.actions.LoginAction.requestorLoginHandler(LoginAction.java:847)
     at com.virsa.ae.actions.LoginAction.execute(LoginAction.java:82)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:256)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:423)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by:
javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name ''
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3030)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2757)
     at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1828)
     at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1751)
     at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:386)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:347)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:332)
     at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:252)
     at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:252)
     at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUsers(LDAPSearchUser.java:518)
     at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUserById(LDAPSearchUser.java:760)
     at com.virsa.ae.service.umi.ldap.LDAPAuthenticator.validate(LDAPAuthenticator.java:131)
     at com.virsa.ae.actions.LoginAction.requestorLoginHandler(LoginAction.java:847)
     at com.virsa.ae.actions.LoginAction.execute(LoginAction.java:82)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:256)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:423)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

My issue is stil not received, i hav send a document to the system team to follow for the integration. The AD configuration for QM shud be very expicit or else integration will not work. I am attachin the doc here. Let me knw if that helps.

Similar Messages

Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.

Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

LDAP Authentication Failed :user is not a member in any of the mapped group

Hi,
I tried to set up the LDAP Authentication but I failed.
LDAP Server Configuration Summary seems to be well filled.
I managed to add a Mapped LDAP member Group: This group appears correctly in the Group list.
But itu2019s impossible to create a User. Although this user is a member of the mapped group (checked with LDAP Brower) , an error message is displayed when I tried to create it (There was an error while writing data back to the server: Creation of the user User cannot complete because the user is not a member in any of the mapped groups)
LDAP Hosts: ldapserverip:389
LDAP Server Type: Custom
Base LDAP Distinguished Name: dc=vds,dc=enterprise
LDAP Server Administration Distinguished Name: CN=myAdminUser,OU=System Accounts,OU=ZZ Group Global,ou=domain1,dc=vds,dc=enterprise
LDAP Referral Distinguished Name:
Maximum Referral Hops: 0
SSL Type: Basic (no SSL)
Single Sign On Type: None
CMS Log :
trace message: LDAP: No such attribute: supportedControl, assuming no ranging support.
trace message: LDAP: LdapQueryForEntries: QUERY base: dc=vds, dc=enterprise, scope: 2, filter: (samaccountname=KR50162), attribute: dn objectclass
trace message: LDAP: LdapQueryForEntries: QUERY result: 0 took 2453 ms
trace message: LDAP: LdapQueryForEntries() QUERY number of entries returned: 1
trace message: GetParents from plugin for cn=huh\,chen, ou=accounts, ou=users, ou=domain1, dc=vds, dc=enterprise.
trace message: LDAP: De-activating query cache
trace message: LDAP: LdapQueryForEntries: QUERY base: , scope: 0, filter: (objectClass=*), attribute: supportedControl
trace message: LDAP: LdapQueryForEntries: QUERY result: 0 took 0 ms
trace message: LDAP: LdapQueryForEntries() QUERY number of entries returned: 0
trace message: LDAP: query for DSE root returned 89
trace message: LdapQueryForEntries: incr. retries to 1
trace message: LDAP: Updating the graph
trace message: LDAP: Starting Graph Update...
trace message: LDAP: LdapQueryForEntries: QUERY base: , scope: 0, filter: (objectClass=*), attribute: supportedControl
trace message: LDAP: LdapQueryForEntries: QUERY result: 0 took 0 ms
trace message: LDAP: LdapQueryForEntries() QUERY number of entries returned: 0
trace message: LDAP: query for DSE root returned 89
trace message: LdapQueryForEntries: incr. retries to 1
trace message: LDAP: LdapQueryForEntries: QUERY base: , scope: 0, filter: (objectClass=*), attribute: supportedControl
trace message: LDAP: LdapQueryForEntries: QUERY result: 0 took 0 ms
trace message: LDAP: LdapQueryForEntries() QUERY number of entries returned: 1
assert failure: (.\ldap_wrapper.cpp:3066). (pSetAttributes : no message).
trace message: LDAP: No such attribute: supportedControl, assuming no ranging support.
trace message: LDAP: LdapQueryForEntries: QUERY base: dc=enterprise, scope: 2, filter: (&(cn=gp-asia)(objectclass=group)(member=cn=huh
, chen, ou=accounts, ou=users, ou=domain1, dc=vds, dc=enterprise)), attribute: objectclass
trace message: LDAP: LdapQueryForEntries: QUERY base: , scope: 0, filter: (objectClass=*), attribute: supportedControl
trace message: LDAP: LdapQueryForEntries: QUERY result: 0 took 0 ms
trace message: LDAP: LdapQueryForEntries() QUERY number of entries returned: 1
assert failure: (.\ldap_wrapper.cpp:3066). (pSetAttributes : no message).
trace message: LDAP: No such attribute: supportedControl, assuming no ranging support.
trace message: LDAP: LdapQueryForEntries: QUERY base: dc=enterprise, scope: 2, filter: (cn=gp-asia), attribute: member objectclass samaccountname cn
trace message: LDAP: LdapQueryForEntries: QUERY result: 0 took 3109 ms
trace message: LDAP: LdapQueryForEntries() QUERY number of entries returned: 0
trace message: LDAP: query for DSE root returned 0
trace message: Failed to commit user 'KR50162'. Reason: user is not a member in any of the mapped groups.
trace message: [UID=0;USID=0;ID=79243] Update object in database failed
trace message: Commit failed.+
Can you please help?
Joffrey

Please do this after you verify all permission settings for all the groups the account is associated with. Also, make sure you check the NTFS folder permissions before doing this as well.
Since the same result happens on multiple computers, it is not the profile.
I am recommending you delete the AD account (or rename to backup the account).
It will not effect the users Exchange account, but you will need to link it back to the new AD user account.
You can also delete her profile just to remove it, for the "just in case" scenario.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

ERROR: user is not configured for keystore 'service_ssl'

hi experts:
System environment:
pi7.0 j2ee sp09
ECC6.0 patch level11
Here is my scenarios..
ECC6.0-->(IDOC)XI(CIDX)--
>External system.
External system-->(CIDX)XI(IDOC)--
>ECC6.0
1.we have got there certificates from external system (rootCA.DER,intermedia.DER,Server.DER), imported the 3 certs files to TrustedCAs view using VA tool after we configured the SSL enable.
2.We generated the CSR file and got the response from CA. we import the CSR response to SERVICE_SSL service
3.I have assigned the role(keystoreadministrator) to user(PIAFUSER,PIAPPLUSER) in security provide service.
4.I configured the IR and ID for the first sceniro. I Selected the "service_ssl" view and "TrustedCAs" view in received agreement in ID, and selected the "service_ssl" view in comunication channeland. actived all of them.
issue :
as soon I trigger the message to external. It is OK in monitor for processed XML Message.
BUT I got the error message in runtime workbench/adapter engine/communication channel mornitoring.
Channel Name: Buyer_Send_OrderChange
Receiver Agreement: |com_sap_abap_r3_200|Sell_elemic|CIDX_E45_20_seller|OrderChange
Security Settings > Current certificate configured for signing:
ERROR: user is not configured for keystore 'service_ssl'
Security Settings > Partner certificate configured for signing:
ERROR: user is not configured for keystore 'TrustedCAs'
Thanks!!.

The question have been solved ..
thanks!
xixi

Communication error, user "did not accept your invitation"

I think need some help. I have read many of the topics, however i have not been able to address my issue. Let me start by saying I am new to Macs (about 3 weeks) and not very technical. I have a Imac and also running time capsule as my wireless connection. As instructed i obtained an AIM account and attempted to do video chat, however when I try i get a communication error, user "did not accept your invitation". I have spent about an hour with apple tech services and have been able to successfully connect to the Apple test buddy. In fact my friend was also able to connect to the Apple test buddy. I have not tested a connection with anyone else.
I would greatly appreciate any help with this issue.

Hi Thank you for responding,
The message says that there was a communication error - did not receive response from the other person. On the other side they received the same error. Below is the error log
Yes, Time Capsule sits between my modem and my computer. I also have a Voice over Internet phone.
The entire set up is as follows.
Internet modem (make; Ambit) to Voice over Internet Modem to Time Capsule (set as router - share a single IP address using DHCP & NAT)
as for setting up time capsule - i set it to "i don't have a wireless network and wanted to create one"
I have not attempted to reach anyone in table 2 - I will do so and let you know
my error log -- again thanks for your help
Date/Time: 2008-03-27 20:46:00.255 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-03-27 20:45:25 -0400: AVChat started with ID 2073701542.
2008-03-27 20:45:25 -0400: loopie5331: State change from AVChatNoState to AVChatStateWaiting.
2008-03-27 20:45:25 -0400: 0x14ae87f0: State change from AVChatNoState to AVChatStateInvited.
2008-03-27 20:45:35 -0400: 0x14ae87f0: State change from AVChatStateInvited to AVChatStateConnecting.
2008-03-27 20:45:35 -0400: loopie5331: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-03-27 20:45:55 -0400: 0x14ae87f0: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-27 20:45:55 -0400: 0x14ae87f0: Error -8 (Did not receive a response from 0x14ae87f0.)
2008-03-27 20:45:55 -0400: loopie5331: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-27 20:45:55 -0400: loopie5331: Error -8 (Did not receive a response from 0x14ae87f0.)
Video Conference Error Report:
17.607834 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
19.608154 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.523429 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
9.592914 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
9.600060 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
15.607906 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
16.108265 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
17.108616 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
17.608293 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
18.108636 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
19.108980 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
19.715397 @Video Conference/VideoConferenceMultiController.m:1474 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 120 bytes of local IP and port data (3 entries). Remote data was 0 bytes (0 entries).
B
Message was edited by: aldoz

Full import error : "user does not exists"

Hi all,
I had 5 separated windows based servers (32bit) with oracle database 9i. I decided to centralize them into one server. So, I configured a new Linux (64bit) and install an Oracle 10gR2. Then I configured a starter database with dbca. I prepared a full dump file from one of old servers and successfully full imported it into starter database on new Linux (10g) server. After that I configured another database using dbca. But when I wanted to full import the previous dump file into new database I have got the error "user does not exists" regarding some demo schema and import terminated unsuccessfully.
I decided to create users regarding the errors and restart the import. After each user creation I was getting a new error for a new user account.
My main question is why first time import terminated successfully without any error but second one in new database raised error?
Thank
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:38 AM

Hi yingkuan,
imp full=y file=.... log=..... userid=system/manager@orcl
ALTER SESSION SET CURRENT_USER = "HR"
ORA-.... : user does not exists
And I know that import will create users that are not exists. Actually, all my specified schema are created but not some of accounts
Regards,
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:59 AM

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

Weblogic 10.2 :Authentication denied: Boot identity not valid

Weblogic 10.2 ,Windows xp prof
I have only one admin server (portal domain) and my application is targetted to admin server only. When I am startting my server the server is stopped forcedly with following exception.
If any have same kind of problem and solved it. please share the solutioin or reason for this :
<May 9, 2008 9:48:19 AM CEST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : Y:\bea\license.bea>
<May 9, 2008 9:48:19 AM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 9, 2008 9:48:19 AM CEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<May 9, 2008 9:48:20 AM CEST> <Notice> <Log Management> <BEA-170019> <The server log file Y:\bea\user_projects\doma
ins\merlinAJAX_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be writte
n to this file.>
<May 9, 2008 9:48:23 AM CEST> <Error> <Security> <BEA-000000> <[Security:090737]An exception occurred while getting
connection to validate the configuration settings
java.sql.SQLException: [Security:090735]The DBMS connection was not usable
at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.getManageableConnection(DBMS
SQLAuthenticatorDelegateImpl.java:911)
at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.validateConfiguration(DBMSSQ
LAuthenticatorDelegateImpl.java:150)
at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.<init>(DBMSSQLAuthenticatorD
elegateImpl.java:76)
at weblogic.security.providers.authentication.DBMSAuthenticatorDelegateImpl.getInstance(DBMSAuthenticatorDe
legateImpl.java:452)
at weblogic.security.providers.authentication.DBMSSQLAuthenticationProviderImpl.initialize(DBMSSQLAuthentic
ationProviderImpl.java:42)
Truncated. see log file for complete stacktrace
>
<May 9, 2008 9:48:26 AM CEST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.
>
<May 9, 2008 9:48:26 AM CEST> <Error> <Security> <BEA-000000> <[Security:090735]The DBMS connection was not usable>
<May 9, 2008 9:48:26 AM CEST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; T
he user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have
been changed since the boot identity file was created. Please edit and update the boot identity file with the prop
er values of username and password. The first time the updated boot identity file is used to start the server, thes
e new values are encrypted.>
<May 9, 2008 9:48:26 AM CEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.s
ecurity.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or passw
ord from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the b
oot identity file was created. Please edit and update the boot identity file with the proper values of username and
password. The first time the updated boot identity file is used to start the server, these new values are encrypte
d.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name an
d/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed s
ince the boot identity file was created. Please edit and update the boot identity file with the proper values of us
ername and password. The first time the updated boot identity file is used to start the server, these new values ar
e encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<May 9, 2008 9:48:26 AM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<May 9, 2008 9:48:26 AM CEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shu
t itself down>
<May 9, 2008 9:48:26 AM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
Autonomy server stopped.
-Sreeram
Edited by sreeram.jonnalagadda at 05/09/2008 1:54 AM

It seems in my case I have a locked pointbase java process.
So I entered task manager and killed all running java process and MY domain started sucessfully.
Sreeram

Java.lang.SecurityException: Authentication denied: Boot identity not valid

Hi,
When I try to start up the WebLogic server by running a startup script
in the WebLogic server root directory, I am getting the following
error:
<Apr 23, 2003 1:15:11 PM EDT> <Critical> <WebLogicServer> <000364>
<Server failed during initialization.
Exception:java.lang.SecurityException: Authentication denied: Boot
identity not valid
java.lang.SecurityException: Authentication denied: Boot identity not
valid
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(SecurityServiceManager.java:1074)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1216)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<Apr 23, 2003 1:15:11 PM EDT> <Emergency> <WebLogicServer> <000342>
<Unable to initialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication denied: Boot
identity not valid
java.lang.SecurityException: Authentication denied: Boot identity not
valid
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(SecurityServiceManager.java:1074)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1216)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication denied: Boot identity not
valid
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(SecurityServiceManager.java:1074)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1216)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication denied: Boot
identity not valid
java.lang.SecurityException: Authentication denied: Boot identity not
valid
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(SecurityServiceManager.java:1074)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1216)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
I am also pasting below the source code of the startup script that I
am using to start WebLogic server:
#!/bin/sh
# This script is used to start WebLogic Server.
# To create your own start script for your domain, simply set the
SERVER_NAME
# variable to your server name then call this script from your domain
# directory.
# This script sets the following variables before starting WebLogic
Server:
# WL_HOME - The root directory of your WebLogic installation
# JAVA_HOME - Location of the version of Java used to start
WebLogic
# Server. This variable must point to the root
directory of a
# JDK installation and will be set for you by the
installer.
# See the WebLogic platform support page
# (http://e-docs.bea.com/wls/platforms/index.html)
for an up-to-date list of
# supported JVMs on your platform.
# PATH - Adds the JDK and WebLogic directories to the system
path.
# CLASSPATH - Adds the JDK and WebLogic jars to the classpath.
# JAVA_OPTIONS - Java command-line options for running the server.
# Other variables that startWLS takes are:
# ADMIN_URL - If this variable is set, the server started will be
a
# managed server, and will look to the url specified
(i.e.
# http://localhost:7001) as the admin server.
# WLS_USER - Admin username for server startup
# WLS_PW - Cleartext password for server startup
# STARTMODE - Set to true for production mode servers, false for
# development mode
# JAVA_OPTIONS - Java command-line options for running the server.
(These
# will be tagged on to the end of the JAVA_VM and
MEM_ARGS)
# JAVA_VM - The java arg specifying the VM to run. (i.e.
-server,
# -hotspot, etc.)
# MEM_ARGS - The variable to override the standard memory
arguments
# passed to java
# PRE_CLASSPATH - Path style variable to be added to the beginning of
the
# CLASSPATH
# POST_CLASSPATH - Path style variable to be added to the end of the
# CLASSPATH
# PRE_PATH - Path style variable to be added to the beginning of
the
# PATH
# POST_PATH - Path style variable to be added to the end of the
PATH
# Alternately, this script will take the first two positional
parameters and
# set them to SERVER_NAME and ADMIN_URL. For instance, you could call
this
# script: "sh startWLS.sh myserver http://localhost:7001" to start a
# managed server named myserver, or just "sh startWLS.sh myserver"
# to start a server named myserver.
# jDriver for Oracle users: This script assumes that native libraries
required
# for jDriver for Oracle have been installed in the proper location
and that
# your os specific library path variable (i.e.
LD_LIBRARY_PATH/solaris,
# SHLIB_PATH/hpux, etc...) has been set appropriately. Also note that
this
# script defaults to the oci817_8 version of the shared libraries. If
this is
# not the version you need, please adjust the library path variable
# accordingly.
# For additional information, refer to the WebLogic Server
Administration Guide
# (http://e-docs.bea.com/wls/docs70/adminguide/startstop.html).
WL_HOME="/usr/local/bea/weblogic700"
JAVA_HOME="/usr/local/bea/jdk131_06"
. ${WL_HOME}/common/bin/commEnv.sh
# Check that the WebLogic classes are where we expect them to be
if [ ! -f "${WL_HOME}/server/lib/weblogic.jar" ]; then
echo
echo "The WebLogic Server wasn't found in directory
${WL_HOME}/server."
echo "Please edit your script so that the WL_HOME variable points"
echo "to the WebLogic installation directory."
# Check that java is where we expect it to be
elif [ ! -d "${JAVA_HOME}/bin" ]; then
echo
echo "The JDK wasn't found in directory ${JAVA_HOME}."
echo "Please edit your script so that the JAVA_HOME variable"
echo "points to the location of your JDK."
else
# Grab some file descriptors.
if [ ! -n "`uname -s |grep -i cygwin || uname -s |grep -i windows_nt`"
]; then
maxfiles=`ulimit -H -n`
if [ !$? -a "${maxfiles}" != 1024 ]; then
if [ "${maxfiles}" = "unlimited" ]; then
maxfiles=1025
fi
if [ "${maxfiles}" -lt 1024 ]; then
ulimit -n ${maxfiles}
else
ulimit -n 1024
fi
fi
fi
# Set first two positional parameters to SERVER_NAME and ADMIN_URL
if [ -n "${1}" -a "${SERVER_NAME}" = "" ]; then
SERVER_NAME="${1}"
fi
if [ -n "${2}" -a "${ADMIN_URL}" = "" ]; then
ADMIN_URL="${2}"
fi
# Figure out how to use our shared libraries
case `uname -s` in
AIX)
if [ -n "${LIBPATH}" ]; then
LIBPATH="${LIBPATH}:${WL_HOME}/server/lib/aix:${WL_HOME}/server/lib/aix/oci817_8"
else
LIBPATH="${WL_HOME}/server/lib/aix:${WL_HOME}/server/lib/aix/oci817_8"
fi
PATH="${WL_HOME}/server/lib/aix:${PATH}"
export LIBPATH PATH
export AIXTHREAD_SCOPE=S
export AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_COND_DEBUG=OFF
echo "LIBPATH=${LIBPATH}"
HP-UX)
if [ -n "${SHLIB_PATH}" ]; then
SHLIB_PATH="${SHLIB_PATH}:${WL_HOME}/server/lib/hpux11:${WL_HOME}/server/lib/hpux11/oci817_8"
else
SHLIB_PATH="${WL_HOME}/server/lib/hpux11:${WL_HOME}/server/lib/hpux11/oci817_8"
fi
PATH="${WL_HOME}/server/lib/hpux11:${PATH}"
export SHLIB_PATH PATH
echo "SHLIB_PATH=${SHLIB_PATH}"
IRIX)
if [ -n "${LD_LIBRARY_PATH}" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${WL_HOME}/server/lib/irix"
else
LD_LIBRARY_PATH="${WL_HOME}/server/lib/irix"
fi
PATH="${WL_HOME}/server/lib/irix:${PATH}"
export LD_LIBRARY_PATH PATH
echo "LD_LIBRARY_PATH=${LD_LIBRARY_PATH}"
LINUX|Linux)
arch=`uname -m`
if [ -n "${LD_LIBRARY_PATH}" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${WL_HOME}/server/lib/linux/${arch}:${WL_HOME}/server/lib/linux/${arch}/oci817_8"
else
LD_LIBRARY_PATH="${WL_HOME}/server/lib/linux/${arch}:${WL_HOME}/server/lib/linux/${arch}/oci817_8"
fi
PATH="${WL_HOME}/server/lib/linux:${PATH}"
export LD_LIBRARY_PATH PATH
echo "LD_LIBRARY_PATH=${LD_LIBRARY_PATH}"
OSF1)
if [ -n "${LD_LIBRARY_PATH}" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${WL_HOME}/server/lib/tru64unix"
else
LD_LIBRARY_PATH="${WL_HOME}/server/lib/tru64unix"
fi
PATH="${WL_HOME}/server/lib/tru64unix:${PATH}"
export LD_LIBRARY_PATH PATH
echo "LD_LIBRARY_PATH=${LD_LIBRARY_PATH}"
SunOS)
if [ -n "${LD_LIBRARY_PATH}" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${WL_HOME}/server/lib/solaris:${WL_HOME}/server/lib/solaris/oci817_8"
else
LD_LIBRARY_PATH="${WL_HOME}/server/lib/solaris:${WL_HOME}/server/lib/solaris/oci817_8"
fi
PATH="${WL_HOME}/server/lib/solaris:${PATH}"
export LD_LIBRARY_PATH PATH
echo "LD_LIBRARY_PATH=${LD_LIBRARY_PATH}"
if [ "${JAVA_VM}" = "" ]
then
# JAVA_VM=-server
JAVA_VM=${COMM_SERVER_VM}
fi
Windows_NT*)
if [ "${JAVA_VM}" = "" ]
then
# JAVA_VM=-hotspot
JAVA_VM=${COMM_VM}
fi
PATHSEP=\;
CLASSPATHSEP=\;
CYGWIN*)
if [ "${JAVA_VM}" = "" ]
then
# JAVA_VM=-hotspot
JAVA_VM=${COMM_VM}
fi
CLASSPATHSEP=\;
echo "$0: Don't know how to set the shared library path for `uname
-s`. "
esac
if [ "${MEM_ARGS}" = "" ]
then
MEM_ARGS="-Xms32m -Xmx200m"
fi
if [ "${PATHSEP}" = "" ]; then
PATHSEP=:
fi
if [ "${CLASSPATHSEP}" = "" ]; then
CLASSPATHSEP=:
fi
CLASSPATH="${JAVA_HOME}/lib/tools.jar${CLASSPATHSEP}${WL_HOME}/server${CLASSPATHSEP}${WL_HOME}/server/lib/weblogic_sp.jar${CLASSPATHSEP}${WL_H
OME}/server/lib/weblogic.jar${CLASSPATHSEP}${CLASSPATH}"
# If we are on an old version of Cygnus we need to turn <letter>:/ in
the path
# to //<letter>/
if [ `uname -s` = "CYGWIN32/NT" ]; then
WL_HOME=`echo $WL_HOME | sed "s#$[a-zA-Z]$:#//\1#g"`
JAVA_HOME=`echo $JAVA_HOME | sed "s#$[a-zA-Z]$:#//\1#g"`
fi
# If we are on an new version of Cygnus we need to turn <letter>:/ in
the path
# to /cygdrive/<letter>/
if [ -n "`uname -s |grep -i cygwin_`" ]; then
WL_HOME=`echo $WL_HOME | sed "s#$[a-zA-Z]$:#/cygdrive/\1#g"`
JAVA_HOME=`echo $JAVA_HOME | sed "s#$[a-zA-Z]$:#/cygdrive/\1#g"`
fi
PATH=".${PATHSEP}${WL_HOME}/server/bin${PATHSEP}${JAVA_HOME}/jre/bin${PATHSEP}${JAVA_HOME}/bin${PATHSEP}${PATH}"
# Import extended environment
if [ -f extEnv.sh ]; then
. extEnv.sh
fi
if [ ! -z "${EXT_PRE_CLASSPATH}" ]; then
CLASSPATH="${EXT_PRE_CLASSPATH}${CLASSPATHSEP}${CLASSPATH}"
fi
if [ ! -z "${EXT_POST_CLASSPATH}" ]; then
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${EXT_POST_CLASSPATH}"
fi
if [ ! -z "${EXT_PRE_PATH}" ]; then
PATH="${EXT_PRE_PATH}${PATHSEP}${PATH}"
fi
if [ ! -z "${EXT_POST_PATH}" ]; then
PATH="${PATH}${PATHSEP}${EXT_POST_PATH}"
fi
# Get PRE and POST environment
if [ ! -z "${PRE_CLASSPATH}" ]; then
CLASSPATH="${PRE_CLASSPATH}${CLASSPATHSEP}${CLASSPATH}"
fi
if [ ! -z "${POST_CLASSPATH}" ]; then
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${POST_CLASSPATH}"
fi
if [ ! -z "${PRE_PATH}" ]; then
PATH="${PRE_PATH}${PATHSEP}${PATH}"
fi
if [ ! -z "${POST_PATH}" ]; then
PATH="${PATH}${PATHSEP}${POST_PATH}"
fi
echo CLASSPATH=${CLASSPATH}
echo
echo PATH=${PATH}
echo
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://<hostname>:<port>/console *"
echo "***************************************************"
if [ "$ADMIN_URL" != "" ]
then
set -x
"${JAVA_HOME}/bin/java" ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS}
-classpath "${CLASSPATH}" -Dweblogic.Name=${SERVER_NAME}
-Dbea.home="/usr/local
/bea" -Dweblogic.management.username=${WLS_USER}
-Dweblogic.management.password=${WLS_PW}
-Dweblogic.management.server=${ADMIN_URL} -Dweblogic
.ProductionModeEnabled=${STARTMODE}
-Djava.security.policy="${WL_HOME}/server/lib/weblogic.policy"
weblogic.Server
else
set -x
"${JAVA_HOME}/bin/java" ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS}
-classpath "${CLASSPATH}" -Dweblogic.Name=${SERVER_NAME}
-Dbea.home="/usr/local
/bea" -Dweblogic.management.username=${WLS_USER}
-Dweblogic.management.password=${WLS_PW}
-Dweblogic.ProductionModeEnabled=${STARTMODE} -Djava
.security.policy="${WL_HOME}/server/lib/weblogic.policy"
weblogic.Server
fi
set +x
fi
--------------END OF SCRIPT----------
So can you please look at the exception and the above-pasted source
code of the startup script file and let me know what needs to be done
to fix the error?
Thanks,
Kalpana

Senthil,
What may have happened is that the boot identity (e.g., the "weblogic" user) is no longer in the realm. Or, you added a second authenticator which has a Control Flag of Required but the weblogic user cannot be found there.
If it's the first scenario, add the weblogic user (and his inclusion in the Administrators group) to the data store for your authenticator.
If it's the second scenario, you need to change the Control Flag to something less drastic such as Sufficient. In this case, you can't make the change in WebLogic Console since you can't boot your server. Have a look in config.xml and see if your newly created authenticator is listed there. If it is, change the Control Flag and try to reboot the server.
Otherwise, copy config.xml.booted to config.xml and start your server. You'll have to re-do your security realm changes, though.
HTH,
Mike

Authentication denied: Boot identity not valid

Hi,
After ADF Security Configuration, I am getting following error while running jspx pages:
<Jun 25, 2010 11:34:51 AM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 25, 2010 11:34:51 AM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
(Purposefully not putting entire run log to avoid cluttering. Can provide if needed.)
Please note that before ADF Security Configuration, I was able to run my jspx pages.
I have condifured ADF security as follows:
'ADF Authentication and Authorization' model
Form-based authentication with default login and error pages
No Automatic Grants
Redirect upon successful authentication - one of my jspx page (which was rendering fine before ADF Security Config)
Also is it possible to temporarily disable ADF security?
Where is the boot.properties located?
Thanks in advance

This error usually occurs on Weblogic server when identity store is changed. Basically the default admin user name password which is used by weblogic when u start with startWeblogic.cmd does not work.
so this is definitely not an issue of ADF Security.
You can remove ADF security from your application from the same menu which you created ADF security. Third option removed all security configuration. Before that you may want to copy your jazn-data.xml and keep it for backup.
boot.properties is to be created in domain\servers\AdminServer\security if present just edit it and
password=
username=
When you run the server it will encrypt the contents.
But as i see it is not an issue with ADF security and unless you have changed something in weblogic console realm providers not an issue with weblogic also.
Easy solution is to clode Jdev and delete defaultdomain in : C:\Documents and Settings\user\Application Data\JDeveloper\system11.1.1.2.36.55.36 and satrt Jdeveloper. Your domain will be automatically created.
Venkat

Authentication denied: Boot identity not valid for Managed Server

Weblogic 8.1 SP4. Solaris 2.8.
Initially, I only had the admin server in my domain. My application was targetted to the admin. Eventually, I created a new managed server so that my application would be targetted here and my admin server would just be dedicated to its admin tasks. I tried starting my managed server for the first time using the standard startManagedWeblogic.sh -
I get this:
####<Aug 22, 2005 12:38:37 PM EDT> <Critical> <Security> <md3801> <winsManagedServer> <main> <<WLS Kernel>>
<> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity
file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was create
d. Please edit and update the boot identity file with the proper values of username and password. The first time the
updated boot identity file is used to start the server, these new values are encrypted.>
bash-2.03$
Starting the admin server is fine and it uses the same boot.properties file in my root directory (user weblogic). But when I start my managed server instance (which is in the same root directory), it complains about the boot.properties ! I assume it uses the same boot.properties file. Any insights ? Thanks.

Hi,
You should know the right username and password, so you have to edit boot.properties by hand.
Remove user and password entry and re-insert them.
Regards,
Antenore.
Antenore Gatta
Middleware Specialist
Hequa S.r.l
C.so Buenos Aires 77
20124 Milano
http://www.Hequa.it
Tel +39(0)267493078
Fax +39(0)267493079
Mobile +39 3481537897
______________________________________

Trying to download itunes i get error message"key not valid in specified date"?

I am trying to download Itunes and get the error message " key not valid in specified date"?

You need to deal with Adobe Customer support. This is a Photoshop User forum the is also one for LR may be some on over there has encountered you problem Photoshop Lightroom

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

See if this post by turingtest2 fixes it : key not valid for use in specified state

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status. How can I do for the new installation.

Am 15.08.2014 14:03, schrieb dj_paige:
>
      LR 5 two installation. Dektop and Notebook. Notebook changed. LR
      5 license deleted. New Notebook, new installation LR 5. Error
      Message, Key not valid at this status.
created by dj_paige <https://forums.adobe.com/people/dj_paige> in
/Photoshop Lightroom/ - View the full discussion
<https://forums.adobe.com/message/6642924#6642924>

CUP 5.2 - LDAP Authentication error - "User credentials not valid."

Similar Messages

Maybe you are looking for