Cupsclient on Solaris 10.. no printer available in applications

Hello folks,
I have following problems. I have installed cups client on Solaris 10.
The Cups server is on a Linux system. (suse)
the client.conf is available with ip adress by cups server.
I can see all printer with lpstat -v on client system (sun solaris)
Then I want to start a application like as Mozilla or evolutioin, then I cannot select printer. No Printer available in applications.
have taken these steps:
ln -s /usr/bin/lp --> /opt/csw/bin/lp
ln -s /usr/bin/lpstat --> /opt/csw/bin/lpstat
ln -s /usr/bin/cancel --> /opt/csw/bin/cancel
ln -s /usr/bin/enable --> /opt/csw/sbin/accept
ln -s /usr/sbin/accept --> /opt/csw/sbin/accept
ln -s /usr/sbin/lpadmin --> /opt/csw/sbin/lpadmin
ln -s /usr/sbin/lpmove --> /opt/csw/bin/lpmove
svcs -a | grep print
disabled svc:/application/print/server:default
online svc:/application/print/ppd-cace-update:default
online svc:/application/cde-printinfo:default
offline svc:/application/print/ipp-listener:default
offline svc:/application/print/rfc1179:default
I can see ALL printers from cups server via lpstat -v, but I see no printers in applications.
The solaris Manager is still available on system.
I do not know any more. Can anybody help me at this problem?
Its very urgent. Pls help me...
thanks
Marco

Hi Kenneth,
I faced the exact same problem few days ago, but i was installing on windows. The logic is the same.
This is the information i got from my installation guide.
"During the installation, the default ports 21200 and 21212 are used for communication between
SAPinst, GUI server, and SAPinst GUI. SAPinst uses port 21200 to communicate with the GUI server.
The GUI server uses port 21212 to communicate with SAPinst GUI. You get an error message if one
of these ports is already in use by another service.
In this case, open a command prompt and change to the required directory as follows:
<DVD drive>:\IM_WINDOWS_<platform>.
Enter the following command in a single line:
sapinst.exe SAPINST_DIALOG_PORT=<free_port_number_sapinst_gui_to_gui_server>
GUISERVER_DIALOG_PORT=<free_port_number_gui_server_to_sapinst_gui>"
There are two things to note here.
1) Your Java_Home environment variable is set and not pointing out to bin folder.
2) Make sure that the ports are free and not in use.
For me, i did the first option and retried and went through.
Please try and let us know if it worked for you.
Regards,
Bharat

Similar Messages

Acrobat X Pro suddenly no Adobe PDF printer available within applications

I have been using X Pro for 2 months following installation of CS5.5 Premium. I used to be able to print-to-file using the Adobe PDF printer in the print dialog box from within apps such as Word and Finale. Suddenly that option is absent from my print dialog box in all apps.

Hi Bill,
I'm SO glad I tried your HELP suggestion first because un- and re-installing was going to be my next step and I dreaded it, and now, given the info you provide below, it appears it was a good thing I didn't do it. Thanks for the further information. I keep a log to refer to when gremlins like this pop up and this is going into it ASAP!!!
jan
Jan Thyer
JT Graphics
1299 Rose St.
Berkeley, CA 94702
510.526.5161 (ph & fax)
Date: Fri, 23 Sep 2011 06:24:49 -0600
From: [email protected]
To: [email protected]
Subject: Acrobat X Pro suddenly no Adobe PDF printer available within applications
    Re: Acrobat X Pro suddenly no Adobe PDF printer available within applications
    created by Bill@VT in Acrobat Windows - View the full discussion
Great. We often hear of folks having uninstalled and reinstalled and problems not going away. The repair is the first line of defense if you have not been able to track down a problem. The last line is a reinstall. One of the problems with reinstalls is that folks do not clean up the system before the install. That clean up should include removal of all latent folder parts left by Acrobat and also running a registry cleaner (MS used to have one, but it is not longer available -- making CCleaner the typical cleanup). So if you have problems in the future, try to trouble shoot it and come to the forum if you need help. Sometimes, the repair is a quick fix, and lastly with no other answers do the reinstall--BUT with the cleanup along the way. Again, glad it worked for you.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3934097#3934097
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3934097#3934097. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Windows by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

No Solaris Management Console was available on the specific server

Hi all,
We had just finish setting up a new Solaris 10 environment. When i launch smc on the server, on selecting toolbox there's an error message:
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running.
However, upon verifying whether smc is running:
./init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Not sure why this error message appeared, thanks.

Regarding SMC (not SunMC)..
Note: SMC = Solaris Management Console
SunMC = Sun Management Center (topic of this forum)
Patch 121308-16+ makes WBEM "secure by default."
Customers running Solaris 10 6/06 or prior must modify the client's WBEM
configuration file to allow remote connections after installing patch 121308.
1. Modify the following line in /usr/sadm/lib/smc/policy/smcserver.config:
FROM:
remote.connections=false
TO:
remote.connections=true
2. Stop and restart wbem.
# /etc/init.d/init.wbem stop
# /etc/init.d/init.wbem start
3. Verify that WBEM is now listening for connections to port 898
on all interfaces:
# netstat -an |grep 898
*.898 *.* 0 0 49152 0 LISTEN
In Solaris [TM]10 update 3 (11/06), the startup mechanism for WBEM was changed
from the legacy (rc script) method to the new Service Management Facility (SMF).
To allow remote WBEM connections on Solaris 10 update 3 or later:
# svcadm disable wbem
# svccfg -s wbem setprop options/tcp_listen=true
# svcadm enable wbem

When I open my iMac, I get this message - Your Mac OS X startup disk has no more space available for application memory. ???????

When I open my iMac, I get the following message : Your Mac OS X startup disk has no more space available for application memory. Then it says to quit applications not in usw and to close windows and remove files from startup disk. It lists Safari, email and Finder. I force a quit on all applications yet the same message comes up every time I open an application. What do I do to get rid of this once and for all? The computer is not even two years old and is only used for email and Safari. Help will be greatly appreciated,

The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

How do I correct a "Force Quit Applications" message? Your Mac OS X startup disc has no more space available for application memory.

My MacBook Pro is giving me teh following message box. "Your Mac OS X startup disk has no space available for application memory" How do I correct this to improve the MacBook's performance?

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
Another process often implicated in memory leaks is "inkjet8," which is a component of the HP printing softwre. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Client printer on oracle application server

Hi all.
I configured my own system on oracle application server and I connected my printer on client machine.
When I wanted to print through the application server on the printer I did not print.
Please could anyone shows me where is the error file (for the printer) located in oracle application server to check the error.
by

No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
cheers

Schedule a Background Job to Available Free Application servers

Hi,
There is a requirement to develop a Wrapper program,which needs to schedule Background jobs by checking all the available free application servers and assigning it to them.
For Eg: If there are 5 application servers in LIVE system,Then this program needs to find free application server's which will submit the job to that particular free server
Appreciate Your Inputs!!
Thanks
Rakesh

Look at some documentation like [Scheduling Background Jobs |http://help.sap.com/erp2005_ehp_04/helpdata/EN/c4/3a7f87505211d189550000e829fbbd/frameset.htm] (look for "system load balancing")
Regards

Cannot print from ANY application after upgrade to 10.4.8 !!!

Hi all,
as it is written in the subject.
Up to yesterday, I had OS 10.3.9, everything ok, could print from any application.
Then I moved to Tiger and to the last version (10.4.8).
And today the "nice" surprise: either from Preview, Texshop, Word, any web browser... I cannot print anymore!! As soon as I go to file/print, the application crashes, any suggestions??
Thanks a lot

Hmmm. It sounds like a possible problem with the system prior to updating. If you've done this already don't be upset by the suggestion. I'm just trying to cover the bases.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.5.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
Download the standalone 10.4.8 Combo Updater (be sure to get the correct version - Intel or PPC - for your Macs. Reinstall the update using the Combo Updater.
As an added precaution I would recommend you first boot into safe mode before doing the above.
There is a shareware utility called Printer Setup Repair (www.macupdate.com) that you can also try. It is sometimes very useful for fixing problems with the printing system.

My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while

Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

Error Message: Your mac osx startup disk has no more space available for application memory.

Hi everyone:
I have a 2010 27" imac. Dual Core i3, 3.2 GHz and 8GB of 1333MHz DDR3 RAM, and a 90% empty 500 GB Hard Drive. Running Snow Leopard 10.6.6
I have received a message intermittently since I got the iMac. The Force Quit menu comes up and says "Your mac osx startupdisk has no more space available for application memory". Sometimes there are a few applications open. Sometimes none. Whenever I look in the Activity Monitor Utility I see 2 or 3 gigs of RAM still available for use, and lots of hard drive space.
Im not sure why I'm getting the message, nor what to do to rectify it. Quitting applications, like it suggests doesn't seem to help.
I am grateful for any advice.
Lauren

Hey Lauren.
First of all you do have some software updates you should be doing. 10.6.7 came out a few weeks ago. Sometimes doing all of your software updates resolve issues such as this.
To check for software updates click the Apple and then Software updates.
As this issue is someone broad, I would test one of the articles below to narrow down your issue.
http://support.apple.com/kb/HT1199?viewlocale=en_US
http://support.apple.com/kb/TS1388?viewlocale=en_US
Let me know if you need extra ideas.
Regards,
Britt.

Printer doesnt appear in the print options window when printing from an application like word etc

Ok this topic is all over the help forums but I have a couple of different observations not previously covered and all remedies that have been posted and worked for most havent worked for me
First of all the Printer used to work with USB or NET connection and then suddenly unexpectedly stopped working. I cant say with 100% conviction whether this was when the upgrade to windows 7 occured or not
things I have tried:-
I have used the hp install wizard
I have a downloaded the windows 7 update.
I can ping the device
I can print a test page.
The icon appears in the device and printer window but with an exclamation mark.
I have tried NET STOP SPOOLER / NET START SPOOLER.
I can scan docuemnts OK
here is the part that I believe appears to be different from the other case on the forum.
If I open a word document and select print the printer preferences dialogue window opens but no printer is visible to select. When I select add printer it shows my network then double clicking this opens a window showing a printer icon but its a previous version?? so when I select it as a printer to add nothing happens and it still doesnt appear as a selectable printer in the printer preferences pop up window. So doesnt print any thing
Im lost for any other ideas to try

I had already tried this and it didnt work on your advice I repeated the process with same results it appears in devices list but with an exclamation mark but trouble shooter fails to find any problem
I refer you to the things tried and status in my first post i.e. I can ping the IP, I can scan. So my thoughts are now it must be something on my PC side that is the issue and not the printer or printer software.
Could it be a security level issue that's the reason why manual selection of add printer comes back access denied ??. Possibly I need admin login. However I am the admin and single user of my PC anyway so I should have access.
or some other PC setting why it doesnt see the printer in the printer settings when printing from an application ?

Hard disk has no more space available for application memory

I keep this getting this error after my applications freeze for several minutes.
"Your hard disk has no more space available for application memory."
I have 1 drive with 160 GB and 46 GB available. I'm pretty sure that's plenty of free space. And why does my memory need my drive? I've got 2.5 GB of memory. That should be plenty sufficient to run Safari without needing virtual memory.
Help!

Hello! OSX uses a virtual memory scheme and even though you have a lot of ram it still utilizes the paging file. Panther 10.3.9 and below runs maintenance routines very early in the morning to clear temp files and other stuff. If you don't normally leave it on 24/7 then you may need to consider a utility to clear the temp files and do the routine maintenance. Tiger 10.4+ runs these automatically. I suggest leaving it on all night for a day or so and then restarting and see if the problem clears up. Here's a list of utilities such as Macjanitor.Tom
Utilities

New MacAir error states "your Mac OSX startup disk has no more space available for application memory" All I have added is MS Office

My new Mac Air states that my " Mac OSX startup disk has no more space available for application memory" and wants to force quit Safari. I have only added MS Office to the computer and Carbonite. Any suggestions?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the Finder and open the Info window. What value is shown for Available (space)?

MAC startup disc has no more space available for application memory.

I have a new mac, very little memory being used, and only a few programs being run...safari, i-tunes, etc. This error window keeps coming up "Your Mac OS X Start up disc has no more space available for application memory. To aviod problems, quit any applications and close windows you are not using. removing files you are not using from your start up disc will help". This window will come up with only finder and safari running, no other applications running. This has been going on for several weeks now off and on. What is causing this and what can I do?

I've had safari, mail and itunes open for a bit this afternoon. Terminal is showing (0) pages in and (0) pages out. I'll continue to keep them open and see what happens and report back if it changes! Here's the rest of the data showing at this time.
Processes: 49 total, 5 running, 44 sleeping, 260 threads 16:02:59
Load Avg: 0.07, 0.20, 0.16 CPU usage: 1.44% user, 2.65% sys, 95.90% idle
SharedLibs: 7052K resident, 10M data, 0B linkedit.
MemRegions: 18435 total, 501M resident, 15M private, 564M shared.
PhysMem: 817M wired, 803M active, 265M inactive, 1886M used, 2206M free.
VM: 122G vsize, 1041M framework vsize, 91422(0) pageins, 0(0) pageouts.
Networks: packets: 261079/251M in, 215760/24M out.
Disks: 106874/1947M read, 143722/2035M written.

Cupsclient on Solaris 10.. no printer available in applications

Similar Messages

Maybe you are looking for