Currency Option in Form

Hi,
I have created a form where the user has to enter a payment amount which can be $, £, €, CHF, etc is there an easy way of allowing them to do this in a numeric field as the form will automatically pick up the default locale?
Many thanks

Hi,
You have two options.
In the File > Form Properties > Defaults tab, you can set the locale for the whole form. One option is to specify the user system locale.
If you want to do it on an object-by-object basis, you can specify the locale in the patterns dialog:
Note that in the patterns dialog, "default locale" refers to the setting you have in the File > Form Properties > Defaults tab (see above).
A word of caution, if the user's version of Acrobat/Reader or their OS is set to a different locale, then you may get different results.
You can also change the locale at runtime. See here: http://assure.ly/hVcqlj.
Hope that helps,
Niall
Assure Dynamics

Similar Messages

Need to have ability to change payment currency in invoice form...

Hi All,
I need to have the ability to change payment currency in invoice form.
For example my invoice currency is USD then I need to select HKD in payment currency option. But right now there is only USD available in payment currency.
Also I need to know how and from where the type, invoice and payment currency details are automatically fetched when opening the invoice form.
Thanks,
R. Bala

Bala,
From the User Manual:
Invoice Currency. The supplier invoice currency is used as a default for new supplier sites you enter. The supplier site invoice currency is used as a default for the Purchasing documents and Payables transactions you enter for a supplier.
Payment Currency. The default for Payment Currency in the Suppliers window is the value you enter for supplier Invoice Currency. You can change the Payment Currency value only if the Invoice Currency has associated fixed-rate currencies (for example, euro). If the Invoice Currency is a fixed-rate currency, you can change the Payment Currency value to an associated fixed-rate currency. The supplier Payment Currency is used as a default for all new supplier sites you enter.
The supplier site Payment Currency is the default for the Payment Currency field in the Invoices window. It is also the default currency for invoices you create for this supplier site by using Payment on Receipt, Open Interface Import, and Recurring Invoices.
Hope this helps.
Octavio

How do I open a document sent to me via EchoSign. Can I disable it as an option for forms sent out?

I created a form in LiveCycle and saved as an PDF. 75% of respondents filled out the PDF, saved it, and returned it as an attachment. The ones returned via EchoSign are ALL BLANK. Can I disable it as an option for forms I send out?

Correct, you'll need to move it to your itunes library and then sync it to your phone.

Attributes select-options in form view.

How to make UI form view context attributes multiple selection ?
Ex: Employee Id attributes. I need provide this employee id like select-options in form view.
Thanks,
kaaviya

Hi,
this is an interesting requirement.
please correct me if my understanding is wrong, do you mean that you want to enable a function like:
employee ID = 3271 or 3270
if we take this field in employee IC employee identification for example, you'd like to enable customer to enter more than one ID to start the search without using wildcard (as sometimes wildcard does not help)
if this is your requirement, maybe try to check the following?
here is an example for account ID search
I enter Account ID = 3271;3270 and start search
in
CL_ICCMP_BP_BUPASEARCHB2B_IMPL
FIRE_QUERY
it will
er_bo_col ?= iv_query_service->get_query_result( ).
how about use a loop to make two query?
In the above example,
IV_QUERY_SERVICE->PARAM_STRUCT_REF->PARTNER = 3271;3270
maybe try to split the string with ; and start the query until the end of this string.
and then combine the two collection?
Hongyan

Currency option in fbl1n/fbl5n/fk10n/fd10n

Hi
i am posting doucment in local currency as well as in USD and EUR in my vendor and customer account. but in FBL1N / FBL5N/ FD10N/ FK10N i am ONLY able to view the statement in local currency. wheras i want to view only those transaction which are posted into USD or EUR.
how to get currency tab in above report or how to view above TC in USD or EUR
please reply

hi
Thanks for immediate response. but in fk10n or fd10n we generally get currency selection option by default. why this is not appearing in my current system does not understand.
i am in ECC6.0 with enhancement patch 3. do we need to apply note to get currency option in above T code.
please shere your experience.
Regards
DD

How to call dicoverer through menu option in forms

Hi,
Need help.........Can anybody tell me .....how to call dicoverer through menu option in forms.
Thanx
Sunil

Hi,
You can define a Form Function filling the basic information and
HTML call Set as OracleOasis.RunDiscoverer. You can even define Paramters during the form function registration. With this definition you will able to create a link to a Discoverer workbook that will automatically open Discoverer Plus or Viewer to display the workbook using Apps security.
Please refer to the following Metalink Note for more details:
278095.1- How to Create a Link to a Discoverer Workbook in Apps11i
Hope This helps
- Sanjeev

Displaying currency lable in forms

Is there a way to display the currency in a form that has been attached to an entity via metadata?
There is a new function in FR to do this but curious to understand how others have done it in forms.

Hi,
When in form, you may change the display of your member by Member Name, Description or both. Make sure in Edit form, you see in right pane the Header pane. You select View dimension and choose which display you want to show in show dropdown choice. Unfortunately, once you set this display, it will apply throughout your form, not specific cell.
Regards,
Anna

Running OS X 10.9 but when trying to list an item to sell on ebay it say=Sorry. Your browser doesn't support the popular listing options selling form. If you'd like to try it, please try using Internet Explorer 6 or higher, or Firefox 1.5 or higher. Help

I am running OS X 10.9
but when trying to list an item to sell on ebay it say= Sorry. Your browser doesn't support the popular listing options selling form. If you'd like to try it, please try using Internet Explorer 6 or higher, or Firefox 1.5 or higher.
Help please so I can continue my sad life

Tried to see if it is looking for flash and it is disabled or not installed by default; java (not being installed and best to turn it off normally), browser agent to report it as something else.
Opera comes the closest I've read to spoofing a site telling it is IE but you have to do so per site. Also OmniWeb.

How to make BSEG-DMBTR (amt in loc CoCode currency) Optional or mandatory?

Hi,
Normally, the field BSEG-DMBTR is hidden unless you put a value (other than that of the company code currency) in the field BKPF-WAERS (Document Currency). However, for data conversion purposes, we are uploading an excel file with our open items & balances and wish to populate both BSEG-WRBTR (amount in transaction currency) and BSEG-DMBTR (amount in CoCode / local currency). The problem is that where BKPF-WAERS = CoCode Currency, the BSEG-DMBTR is hidden. It seems there's no way of making BSEG-DMBTR optional / mandatory via the field status of either the g/l account or the posting keys..........
Any ideas on this, or experiences you've had regarding uploading values to BSEG-DMBTR and BSEG-WRBTR wold be appreciated. For example, if the document currency = CoCode currency, have you just uploaded the value into BSEG-WRBTR? The reason we are trying to upload both BSEG-WRBTR and BSEG-DMBTR is because in our excel file, it makes reconciliation easier if we have the BSEG-DMBTR for all documents (inclulding those where the transaction currency = CoCode Currency).
Regards, Garoid.

when you enter the doc currency as local currency - system will ask only doc currency which will be updated in local currency field automatically- no customising required.
When you enter the doc cur as a different currency than local currency, you have option to enter
a. exchange rate
b. enter doc currency and local currency - where rate will be updated automatically by conversion the actual values written.
When you manually update the Revaluation entries - system will not allow you to enter doc currency - it will ask only local currency. or additional currency as the case may be (if you maintain more parallel currencies.
SAP program takes care of the subsequent screens fields on the basis first screen entry made- This will be clearly visible when you use Complex posting TCodes like FB01, F-02, etc. This may not be visible in Enjoy SAP screens as the fields are controlled through variants activated - but internal controls stands same.
Hope it is clear.

Strikethrough option in Form

Dear all,
I am trying to create a form with an option to strike through either one the words "Yes" or "NO" as shown below". I cannot find anyway to do so, but I do see some forms download from the internet can do it. Please help.
Q1. Are you a xxxx?.......................*Yes / No
* strikethrough as appropriate
Here is the form with strikethrough option
http://www.bd.gov.hk/english/forms/Ba04_f.pdf
see "I/We (name in full)" on the first page.
Thanks,
warsur

Thanks George,
I have no knowledge about script things. I tired to google it. And managed to write a script as below. However, it doesn't work. Where goes wrong?? Please help.
if(event.target.buttonCaption == " ")
{event.target.buttonSetCaption("Pushed Down");}
else
{event.target.buttonSetCaption("");}
Regards,
warsur

Need to update the FSG currency format at form 999,999,999,99.99(default) to 99,99,99,999.99 (Indian)

Hi All,
I need to change the currency format in App's GL FSG report. It's by default comes 999,999,999,999,99.999 form this i need to change into Indian currency format (99,99,99,99,999.99).
I tried to changed the format in column set but it doesn't changed.
I am working in Apps R12 on RHEL5.5 64bit OS.
Thanks in Advance.
Regards
Chander

I'm not sure I understand the question. Are you saying you want the bold part of your path (currently hard-coded) to be in a variable instead? That would look something like this:
$file_server = Read-Host "Enter the file server IP address"
$guid = '{231A178D-DC6C-4186-9575-9C64F07DA5B5}'
(Get-Content "C:\TEMP\GPO\source\5\$guid\gpreport.xml") |
ForEach-Object { $_ -replace "99.999.999.999", "$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\gpreport.xml"
(Get-Content "C:\TEMP\GPO\source\5\$guid\Backup.xml") |
ForEach-Object { $_ -replace "99.999.999.999", "$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\Backup.xml"
(Get-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Documents & Settings\fdeploy1.ini") |
ForEach-Object { $_ -replace "99.999.999.999", "$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Documents & Settings\fdeploy1.ini"
(Get-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\Drives\drives.xml") |
ForEach-Object { $_ -replace "\\99.999.999.999", "\\$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\Drives\drives.xml"
(Get-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\files\files.xml") |
ForEach-Object { $_ -replace "\\99.999.999.999", "\\$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\files\files.xml"

Totaling Different Currencies in Smart Forms

Hi Experts,
I am able to print smart form in the form of table ,
Country | Employee No. |Visa Type |Amount| Currency
USA        1                     B1             500       USD
USA        1                     L1             200       USD
UK          1                     WP            100      GBP
UK          1                     BV             500       GBP
NL          1                      BV             500      EUR
DK          1                     BV             100       EUR
But I want to sum up differnet currencies total wise.
Please advice.
Regards,
IFF

IFF,
can you not create program line in Smartforms and use
At end of for summing up?
Amit.

ABAP WD application using Select Options & Adobe form :Don't see form data

Hi,
I am trying to get multiple PDF forms by passing multiple order numbers.I was able to get one PDF form successfully and now I am enhancing this application.
For doing this I have created nested WD Context .
1) Created a Node for Selections. ND_SELECT ,
Cardinality: 1..n ,
Selection: 1..n ,
Intialization lead Selection : Checked ,
Singleton : Checked
2) Created a Node for Output Structures ADOBE_DATA
Properties same as above
3) As we need Nesting Under ADOBE_DATA node I have created a subnode for Header: HEADER
Properties same as above
4) Under HEADER node I have created a items Node : ITEM
Properties same as above
As I have used Select-options and I am getting both header and Item data in to button search method .
DATA lo_nd_adobe_data TYPE REF TO if_wd_context_node.
DATA lo_nd_header TYPE REF TO if_wd_context_node.
DATA lo_el_header TYPE REF TO if_wd_context_element.
DATA ls_header TYPE wd_this->element_header.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
lo_nd_adobe_data = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).
* navigate from <ADOBE_DATA> to <HEADER> via lead selection
lo_nd_header = lo_nd_adobe_data->get_child_node( name = wd_this->wdctx_header ).
lo_nd_header->bind_table( new_items = it_header set_initial_elements = abap_true ).
DATA lo_nd_item TYPE REF TO if_wd_context_node.
DATA lo_el_item TYPE REF TO if_wd_context_element.
DATA ls_item TYPE wd_this->element_item.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
lo_nd_adobe_data = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).
* navigate from <ADOBE_DATA> to <HEADER> via lead selection
lo_nd_header = lo_nd_adobe_data->get_child_node( name = wd_this->wdctx_header ).
* navigate from <HEADER> to <ITEM> via lead selection
lo_nd_item = lo_nd_header->get_child_node( name = wd_this->wdctx_item ).
lo_nd_item->bind_table( new_items = it_item set_initial_elements = abap_true ).
Could you please tell me where I am doing wrong?
In adobe form
Created one MainForm and its properties are
Binding : $record.HEADER.DATA[*]
Repeat subform for each data item Checked , Min Count: 1
Subform Content : Flowed ,Western Text , Allow page breaks withing Content Checked
Accessibility /Subform Role: None
Inside this Mainform I have created a small table ITEMTABLE with 3 fields and mapped it item data.
Itemtable properties
Binding : ITEM
Uncheck Repeat table for Each Data item.
I have Itemtablerow inside Itemtable and its properties are:
Binding : DATA[*]
Repeat row for each data item Checked ,Min count: 1
Accesibility:/Subform Role: Body row
Row: body row, Check Allow page breaks within content
Still donu2019t see data on form.here is what i have in Hierarchy tab.
ADOBE_DATA (no Caption)
- (Master pages)(no caption)
         Page1
                  Untitled Content Area(no caption)
- Mainform(no Caption)
                   PSPID {PSPID}
          -ItemTable (No caption)
                  - ItemtableRow (no Caption)
                               PSPID(no Caption)
                                CJTDAT(no Caption)
                                CPERCO(no Caption)
What could be going wrong ?
Rgds
Vara

Hi John,
In the WD4A view, there is a button "Show/Hide Layout Preview".
Click on that button to be able to see the Layout.
Note that this button is next to the Pretty Print button.
regards,
Reema.

Highlight Fields Option on Forms

Hi, I have noticed when I place form fields in documents in Acrobat 8 professional, that sometimes it automatically creates an icon at the top left, just above the "Pages" icon, for having the purple bar accross the top of the page with the button to highlight the fields. But sometimes after placing form fields in a document it doesn't enable this option. And even when I look in the "Forms" menu dropdown the option to highlight fields is grayed out. Why does it lock this option off on some files and how can I manage this option? FYI: I don't have the box checked under edit preferences for "Forms" that says "Always hide forms document message bar".
Thanks

Ok thanks that seems to be it. I added two more fields to a file that only had one and it did seem to enable it. Seems odd that Adobe requires at least three before this can be enabled instead of simply if the file has fields or not.

Problem in printing amount in different currencies in adobe form

Hi All,
I have a requirement to print the amount as space for thousand seperator and comma for decimals.
I have set the pattern format such that the amount is printing in below format as required.
Locale---Italian.
Space as thousand seperator and comma as decimal seperator.
for example 1 234,45
As some of the Currencies will not have decimals, now users would like to print amount without decimals. For example in my case amount printing in KRW ( Korean currency ) is also similar to the above format which is wrong.
for example Now amount is printing as 55 000,00. But actually it should be 550 000. Similarly for JPY currency also, as it doesnot haves decimals ( checked in TCURX table ).
I have written some logic in the interface. below is the logic.
WRITE:
    wa_mhnd1-wrshb to wa_item-wrshb CURRENCY WA_ITEM-WAERS.
*READ TABLE lt_tcurx INTO lwa_tcurx WITH KEY currkey = wa_item-waers BINARY SEARCH.
IF sy-subrc = 0.
IF lwa_tcurx-currdec = '0'.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
else.
   REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
    REPLACE ALL OCCURRENCES OF '.' in wa_item-wrshb WITH ','.
endif.
ENDIF.
a. when the write statement gets executed amount will be in ,. ( 1,234.45 )format. Then my logic gets executed correctly. In this company code is CH10 ( EUR ) and KR10.
b. But sometimes after the write statement gets executed amount will be in ., format ( 1.234.45 ). In this case my logic works, but gives the wrong value. In this case company code is VN10 ( EUR )
In both the cases currency is EUR.
Will the decimal format change accordingly based on the company code code currency.Can anyone please tell me why write statement behaved differently.
Do I need to change any locale in the adobe form, or any other logic to be written in interface. ? I am trying it out from long time, but not able to fix it. I will have to fix it ASAP.
Can anyone kindly please help me how to achieve this ?
Thanks and Regards,
Karthik Ganti.

Hi Ayan,
Thanks for your reply.
I have already made the locale to default in adobe form and tried. In the interface I have written the logic to print the amount in particluar currency.
WRITE:
    wa_mhnd1-wrshb to wa_item-wrshb CURRENCY WA_ITEM-WAERS.
*READ TABLE lt_tcurx INTO lwa_tcurx WITH KEY currkey = wa_item-waers BINARY SEARCH.
IF sy-subrc = 0.
IF lwa_tcurx-currdec = '0'.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
else.
   REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
    REPLACE ALL OCCURRENCES OF '.' in wa_item-wrshb WITH ','.
endif.
ENDIF.
I dont know why the above write statement is behaving differently. In one case the value is shown as 1,234.00, but in another test case it shows 1.234,00.
In both the test cases the currency is 'EUR'. In case if the above write statement works correctly, my issue will be solved.
Can anyone tell me why the write statement is behaving differently. Will the currency be dependent on any other factor ( for example company code,customer )
I would like to fix this ASAP.
Thanks and Regards,
Karthik Ganti.

Currency Option in Form

Similar Messages

Maybe you are looking for