Current MAP not reflecting

Hi experts,
If am facing one problem while costing, need your help for the same.
I have an FG1 which is costed and have released price on 2'nd of this month in which there is an component A.
Now i am costing another assume  FG2  which also contains same component A whose current MAP is 69 and previous MAP was 150, After 2'nd this component A was tranferred to another plant with 301 movement, so the MAP has now been updated to 69.
Now when i am costing FG2 the MAP for component A is reflecting 150 which was previous MAP which was released after the costing of FG1, According to PRICE CONTROL INDICATOR 'V' the MAP should come from the material master of component A as 69 which is not the case.
Kindly suggest the solution for same.
Regards,
Lodhi.S

Closed

Similar Messages

  • XSLT mapping not reflected at the receiver

    Hi ,
    I am working on IDoc to proxy scenario . At the receiver i have SNC which uses standard content . The mapping here is XSLT mapping .
    I modified the standard content XSLT mapping according to the requirement . The mappings works fine in the test tool . However on checking the payload at the receiver side the field i mapped is non existent
    this is the XSLT code i used for mapping
    !--TAxcode -->                    
    <xsl:if test="count (./E1EDP04/MWSKZ)!=0">
                                       <xsl:element name="FollowUpInvoice">
                                            <xsl:element name="ProductTaxationCharacteristicsCode">
                                                 <xsl:value-of select="./E1EDP04/MWSKZ"/>
                                                 </xsl:element>
                                       </xsl:element>          
                                  </xsl:if>
    ProductTaxationCharacteristicsCode has 0-1 occurence
    Is there anything i am missing out here ?

    Hi,
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    http://www.w3schools.com/xsl/xsl_languages.asp
    http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
    http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
    If we use Altova map force tool, it will automatically generate the code, instead of we manually writing.
    Here we map the mapping like our graphical, internally it generates the corresponding the XSLT code.

  • My WishList does not reflect current purchases

    Ever since transferring my iTunes library from my PC to iMac, I have noticed that My WishList in iTunes store, while it lists all the previously "wished for" apps and songs, does not reflect which ones I have purchased. In other words, it used to be that the purchased apps were listed, and instead of a price it would just say "purchased." Now it just shows a price, as if I never purchased the app. Even when I open the app description in the itunes store, the price remains, as if I never purchased it. I have occasionally seen this happen when the iTunes store account took time to refresh the information it had, but this has been going on for several weeks.
    Is there someway to "remind" my iTunes account of what purchases I have, so that my purchase history is correctly reflected? I've been using the same account the whole time, so I know that is not the problem.

    Where did it show as a portable device? If in My Computer try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes: Syncing media content to iOS devices and iPod

  • 2LIS_02_ITM deleted line items are not reflected in BW

    Hi,
    Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
    I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
    In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
    If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
    I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
    Thanks

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • Check Box values not reflecting in the pageflow instace variable

    Hello BEA Experts,
    I am binding a checkBox group to an instance variable of a Pageflow , it seems that the array inside the pageflow is null no matter what can you please let me know why.
    Is it possible to bind the checkbox group tag to an array in Pageflow or is there anything wrong with the way I am using the checkbox group with in a data- repeater table.
    Here are the code snippets..
    JSP:
    <netui-data:repeaterItem>
    <tr class="tablebody">
    <td>
    <netui:checkBoxGroup dataSource="{pageFlow.nodeIds}">
    <netui:checkBoxOption value="{container.item.nodeId}">&nbsp
    </netui:checkBoxOption>
    </netui:checkBoxGroup>
    Contoller:
    Has a private instance varible named nodeIds with getter and setter methods..
    Please let me know why the checked values are not reflecting in the pageFlow attribute.

    Hi Bob
    I didn't understand fully what you are trying here. Could you please clarify?
    I assume that you have a Array of NodeId objects.
    Lets say:
    Public NodeId[] nodeids = new NodeIds[10];
    and you want a checkBoxGroup mapped to NodeId[]
    and have as many checkBoxOption as number of elements in array with value as NodeId(i).nodeId
    Is this assumption correct?
    If the above is correct then the code snippet you have pasted is wrong in the sense that checkBoxGroup datasource is the array but the Option value is the main repeater item's nodeId which is wrong.
    The container.item would not access anything within the pageflow variable.
    I will post a sample in the next one
    Vimala-

  • BPM 11g Role Assignment not Reflected on BPM Workspace

    Hi,
    I'm having trouble with role maping in JDeveloper for my BPM 11g project, where the server groups mapped against a particular applcation role is not reflected in BPM workspace.
    I'm mapping application roles with server groups in the Organization section of my BPM project in JDeveloper, but when I open the Administration section of the BPM workspace, I see that the appropriate section is blank where there should be the server group assigned.
    I have confirmed that the server groups are in place, and have users associated with them. I even tried ti with the Administrators groups of WebLogic, with the same results.
    However, when I deployed this same project on an Oracle On Demand server, the JDeveloper role maapping was successfully deployed along with my process. Could anyone please provide some insight in this matter?
    I'm working on JDeveloper and SOA 11.1.1.5
    Thanks,
    Debojit

    HI,
    In 11g you have the concept of Global Links. You can refer to http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_ext_apps.htm#BACCACGI fro example of how this can be acheived
    I think there are also some samples on java.net for Oracle BPM Suite however this appears to be down at the time of posting so I can not validate this.
    Hope this helps
    Regards Dave

  • Updated (VORowImpl ) values are not reflected in inline POPUP table

    Hi Expert,
    Currently i am getting exception when i try to update my iterator binding,
    Here is my use case,
    I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
    First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
    Then i used the following code
    DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
    if (itrBinding != null) {
    itrBinding.executeQuery();
    itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
    Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
    May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
    Thanks

    Thanks Frank, Actually i am accessing the client method as follows,
    DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
    if (itrBinding != null) {
    EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
    empoyeeVO.methodName();
    May i know what is the different between accessing the method as shown above and access via the MethodBinding?
    How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
    Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
    Thanks
    Edited by: user1022639 on Feb 7, 2012 5:24 PM

  • Changes made in LR 1.3 to psd files are not reflected in ACR 4.3, Bridge 2.1.1.9, or Photoshop CS3

    I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
    If anyone has any help - I would greatly appreciate it!
    Thanks,
    Ann
    System=
    160 GB hard drive
    Intel core duo T7500
    2 GB Ram
    Windows Vista 32 bit
    ACR 4.3
    LR 1.3
    Bridge 2.1.1.9
    PS CS3 (updated last week)

    I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
    In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes.

  • Date Customer Exit in the query is not reflecting in the workbook

    Hello.
    We have a BI 7.0 Query where we have a restriction for req del date and billing date to show the month of current date - 2.
    We have written 2 customer exit variables and we have restricted the same. The query is working well.
    For Broadcasting, we have created a workbook for this query and saved it under a role.
    The workbook is fine running for the current month., But if the month changes to the next, the workbook is not reflecting the same.
    Still only Old dates are available in the workbook.
    Please let me know if i am doing any mistake

    Hi Karthik,
    If the customer exit variable is of type i_step = 1, ie if it is a manual entry variable as well, then this will not get updated based on teh month of execution.
    Kindly check the article below for info.
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/enterprise-data-warehousing/how%20to%20update%20variable%20values%20in%20broadcast%20settings%20dynamically.pdf
    Regards.
    Shafi.

  • Container Variable value not reflected in Alert message

    Hi All,
    In BPM, i am trying to set an Alert message which will send the message in alert Inbox. Here i have stored a value from the message in a container variable. This Container variable value is used in the Alert message in the form of &variable&. But whenever i specify container variable value, it is not reflected in the Long text of Alert Inbox. In Alert category i have also checked the Dynamic text. Still it is not coming.
    Can u suggest what is the possible solution for this.
    Thanks in advance
    Ashish

    I was able to get the Alert Message by changing container variable from "Block " to "Process". But It was containing the value of the first message.
    Actually i am having a scenario in which i am transforming a File message input into multiple messages based on its PO number using multi mapping. These messages are send as IDOCs using Parrallel for Each block, where i store the PO number in the container variable and use it in alert message. So for that i have to use this block name as container and not as a Process.
    Can anybody tell me why this Container Variable value is not reflected in the alert message.
    Thanks in advance
    Ashish

  • Changes are not reflecting in Quality server

    Dear All,
    We have recently installed the Portal 7.4 servers.
    Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation)  we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on  click of  import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
    Regards,
    Ramana.

    Dear Ervin/Jun Wu,
    Thanks for the Responce.
    As per the given link the track is configured  with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
    http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
    Please check the below log regarding deployment when we do the import
    SDM-deployment-notification  Log file.
    20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
    20141028125231 Info :Deployment is performed asynchronously.
    20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
    20141028125231 Info :
    20141028125231 Info :RequestId: 152
    20141028125231 Info :==> no resulting DCs for deployment
    20141028125231 Info :Follow-up requests:
    20141028125231 Info :
    20141028125231 Info :
    20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
    Regards,
    Ramana.

  • Changes are not reflecting in the Quality

    Hi,
    These are standard SAP Components. I have imported the ESS and MSS Packages.
    Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
    I have made  changes  to those objects and sucecessfully  build  without errors.
    After check-in all  activities  those activities are working fine in Development system.
    But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
    I was fixed the error in the Development system and build the components without build error.
    still now changes are not reflecting in the quality system.
    But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are  reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
    Please help me as soon as possible....Its very help full for me
    Regards
    Sudhakar Reddy A

    Hi Slava,
    very very thanks to you for the fast reply. but one thing in my side.
    When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
    The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
    When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
    my system administrator findout build error in consolidation system:
    [wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
    I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
    Regards,
    Sudhakar

  • Changes in MM02 not reflecting in COPA lin item report

    Hi,
    In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
    I am designing report for three companies by using material group 1,2,3,4 and 5.
    We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
    Please suggest on how should we rectify our material grouping to reflect in COPA report.
    Regds

    Hi,
    in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
    If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
    TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
    This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
    To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
    If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

  • Qualification Information updated in PUI not reflected in Self Service

    Hi there,
    I noticed that when I update my qualification information via sefl service, after HR approval, this information is reflected in the Qualification forms in the PUI.
    However, if I update my qualification via PUI, this information is not reflected in my self service page.
    Im currently lost as to tracking why is this happening. Im not even able to locate the tables these information are written into.
    Any clue would be great!
    Thanks & cheers,
    HK

    You also might want to try myDataProvider.refresh(), where myDataProvider is the data provider for the DataGrid. Make sure you are using a collection like ArrayCollection or XMLListCollection and you are using the [Bindable] metadata tag.
    If this post answers your question or helps, please mark it as such. Thanks!
    http://www.chikaradev.com
    Adobe Flex Development and Support Services

  • Changes in the repository not reflected in Catalog UI

    Hi Experts,
    I am facing issue with respect to above subject,i tried to find a solution in forums but,couldnot find suitable solution.
    we are upgraded MDM Catalog from 2.0 to 3.0.
    when i create a new field in MDM Console the same is not reflecting in Catalog UI to do OCI mapping.
    The same is working in Dev system but,when i tried in QA not able to do OCI Mapping as the new field created is not available.
    Please share your views to solve the issue.
    Regards
    Sunil

    Hi Shiv,
    Thanks for your reply.Now,we are able to map new field created in MDM in OCI mapping.But,when i login portal and connected catalog i am getting below error  because of new field ('MDMSRM_VMI_STATUS') mapped.
    However when i remove newfield in OCI,no error when connecting to catalog.
    Please advise
    Regards
    Sunil
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.IllegalArgumentException: Field with Code 'MDMSRM_VMI_STATUS' does not exist in the table 'MDMSRM_CATALOG_ITEMS (T1) '
    Edited by: PSUNIL on Jan 19, 2012 2:48 PM

Maybe you are looking for