Cursor can't find newly commited Master row

Hi all,
This is my current headache. In my form I successfully COMMIT a row in a master table. Later in the same form, same session, the user wants to add a row to a detail table. But before the user can do that, I first check to see if the master exists via a cursor look-up, and the cursor cannot find the newly added master. Does anybody know why?
Thanks,
Larry

After you commit the row, open PLSQL and do a query and double-check to see if the row was really inserted. If it is not there, then your form is not successfully inserting the row as you think. Check the insert routine and make sure you are checking for exceptions.
If the row is there, than again open PLSQL and debug the cursor routine.

Similar Messages

  • Can we find the number of rows in table from the dump file

    Hi All,
    Can we find the number of rows in table from the dump file with out importing the table in to the database?
    Please let me know ,if any option is there.
    Thanks,
    Kumar.

    <s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s><br>
    <br>
    Nicolas.<br>
    Oops, sorry, that doesn't show the number of lines...<br>
    Message was edited by: <br>
    N. Gasparotto

  • I can't find newly purchased songs in iTunes Match.

    I Can't find newly purchased songs in iTunes Match. Anybody know why?

    Hi - you are not alone in this. I've had the same problem, and apparently so have others. I'm also following the discussion:
    Re: Purchased music does not appear in my "Music Library"
    Posted: Jan 5, 2011 5:06 PM   in response to: Bryan Berman  
     Hopefully we will find the solution!

  • How can we find out when master data was activated

    Hello Friends,
    We are loading master data for one info object directly from R3 to Info Object without PSA.
    1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
    2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
    Thanks
    Tony

    hi,
    1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
    Ans- yes it give loading details only.
    2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
    ans -in SM37 chk any attribute change run is completed , else in RSA1 Tools -> apply attribute change and hierarchy -> you can see the finished and scheduled job.
    also u can chk the master data table for any M version records is available.
    Ramesh

  • How can we find tables for master data transactions

    hi
    could anybody tel.............
    when we create a customer the information is updated in structure RF02D
    some tables like kna1 are updated.
    how can we find these tables..?

    Hi Kalyan,
    This is how you can find any transparent table you want.
    1. Put your cursor in any of the  fields of the customer screen and hit <b>F1</b> on your keyboard. Next Click on the "<b>Technical Information</b>" icon. Under "<b>Field Data</b>", this would show you for example structure <b>RF02D</b> and field <b>KUNNR</b> (Customer Number), if your cursor was in the Customer Number field. Copy the field KUNNR.
    2. Next, open another session and execute transaction code <b>SE80</b>. On the Menu Bar, click "<b>Environment -> Repository Information System</b>". Open up the folder "<b>ABAP Dictionary -> Fields -> Double Click on Table Fields</b>". Paste your Customer Number field name (KUNNR) in the "<b>Field Name</b>" and Execute. This would show you all the transparent tables where the Customer number is stored.
    I hope the above helps.
    Do not forget to award the points please.
    Regards,
    Jacob

  • I can't find the installation master of ERP2005 on ServiceMarket

    Our company will implement EP 7.0 recently,but I couldn't find the installation master of ERP2005 on ServiceMarket when I visited Download>SAP Installations & Upgrades>SAP ERP 2005-->Installation and Upgrade.Could you tell me where I can find it.
    Thanks.

    Hi,
    in <a href="https://service.sap.com/~sapidb/011000358700006458342006E.pdf">this document</a> you can check what inst.-media you need for your usage type.
    In my (german) market place there's no ERP 2005?!? The path is:
    <i>Installations and Upgrades - SAP NetWeaver - SAP NETWEAVER -  SAP NETWEAVER 2004S</i>
    and then f. e.
    <i>Installation & Upgrade - Windows Server - ORACLE</i>
    The download you look for could be:
    <i>BS2005 SR2 Installation Master Windows Server on x64 64bit</i>
    I prefer to order the inst.-media from SMP alias swcat, as I get all DVDs/CDs the installation may ask for, rather than endlessly downloading the next file(s).
    Peter
    Points always appreciated

  • Can't find newly purchased movies

    I just bought Spider-Man trilogy on my Mac mini and it shows up as a charge on my account- but I can't find the movies (the spider-man movies). Not in my library, not in available downloads. ??

    Make sure you're in the Movies library and not elsewhere. And if you still can't find it you can re-download it from the iTunes Store. Go to the iTunes Store. There is a link call Purchases on the right part of the page. You'll find everything you've purchased from iTunes there.

  • How can I find which datafile a row in a huge partitioned table belongs to?

    Hello guys.
    We have a bunch of potentially corrupt LOB data in a 15TB partitioned table. I have run a query to find out what rows may be corrupt. Is it possible to find out if these belong to a common datafile (the are 450 datafiles in this tablespace)?
    Oracle 10.2.0.4 single instance on HP-UX
    Any help appreciated
    Sandy

    The Flaz wrote:
    Hello guys.
    We have a bunch of potentially corrupt LOB data in a 15TB partitioned table. I have run a query to find out what rows may be corrupt. Is it possible to find out if these belong to a common datafile (the are 450 datafiles in this tablespace)?
    Oracle 10.2.0.4 single instance on HP-UX
    Any help appreciated
    SandyTo checking corruption datafile level you can use dbv utility.But to fixing(marking) corruption you have to use dbms_repair package.Please refer below links
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/repair.htm#sthref3170
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/repair.htm#sthref3192

  • How can I find out the new row.

    I use below coding to create a new row,
    row =vo.createRow();
    vo.insertRow(row);
    row.setNewRowState(Row.STATUS_INITIALIZED);
    My question is how I can find out it later?
    thx.

    If you have just inserted one row, then getCurrentRow should work.
    in case you have inserted multiple rows after doing a setattribute, or setting the PK values in EOImpl, then you would need to loop through the VO and find the ro that matches the values using getAttribue method.
    Thanks
    Tapash

  • Why I can not find mic under master volume -- laptop is HP 8510w.

    generally it should have a setting for microphone under master volume.
    do you know what's the rootcause/thanks.

    Hi popcatalin118. According to the Maintenance And Service Guide you are spot on!
    (Power button board (includes cable) 720553-001)
    Guide Download here: See Page 22:
    http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf
    Let me know if that helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can't find my CS5 master collection disk, but I am registered.

    Is there any way to obtain a new copy of the program I bought in 2010. I am registered, and just need to install the master collection (CS5) on my new computer. I have my serials, but no way of getting the installer.

    Direct Download Links for Adobe Software
    And make a backup...
    Mylenium

  • Can't find upgrade master dvd  for ERP 6.0 EHP4 !

    Where can I find the upgrade master dvd for upgrade to ERP 6.0 EHP4  (windows/oracle) ? Does anybody knows the right materialnumber?
    My collegues has copied the relevant dvds from sap upgrade dvd-package to disk and I don't find th "upgrade master dvd" with STARTUP.BAT.
    I looked into download area service.sap.com/swdc:
    My Company's Application Components->SAP ERP->SAP ERP ENHANCE PACKAGE-> EHP4 FOR SAP ERP 6.0 / NW7.01
    but there are only upgrade export dvs, language dvd, etc, but  NO Upgrade master dvd, too!!!
    Kind Regards,
    Uta

    Dear Ute,
    i use this one "Number 51036889"
    it is the Upgrade Master from NW701 which is also for EHP4.
    Its located under the EHP1 Tree:
    Installations and Upgrades" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" SAP EHP1 FOR SAP NETWEAVER 7.0.
    hope this helps
    Regards
    Bjoern

  • How can i find Duplicate Rows in forms6i

    Hi,
    How can i find duplicate rows in multiple record in forms6i.
    Thanks
    Raghu.K

    Oops, sorry for misreading your question. (However the SQL I gave you above is also very handy, and worth saving.)
    Okay, this is off the top of my head and untested, but might just work. Assuming that your data block name is MYBLOCK, and that the item that you want to check for dups on is named MYNUM, create an item-level WHEN-VALIDATE-ITEM trigger with the following code.
    declare
    l_newest_record number(10) := :system.cursor_record;
    l_newest_mynum number(10) := :myblock.mynum;
    l_dup_found boolean := false;
    begin
    -- In this loop, we skip backwards through all new records to look for dups.
    while :system.cursor_record > 1 loop
    previous_record;
    if :system.record_status = 'NEW' then
    if :myblock.mynum := l_newest_mynum then
    l_dup_found := true;
    exit; -- Dup found!
    end if;
    else
    exit; -- We've gone backwards past the first new record.
    end if;
    end loop;
    -- In this loop, we return to the current record.
    while :system.cursor_record < l_newest_record loop
    next_record;
    end loop;
    if l_dup_found then
    raise duplicate_row_found; -- user-defined exception
    end if;
    end;
    The above code only checks for dups in the new form records. It assumes that a unique constraint in the database will deal with records actually committed.
    Armand

  • Can V find Master data datasource by having Transaction data datasource?

    Hello All
    I have a datasource in r/3 side by this can v find Master data datasource?
    The Transaction datasource is 2lis_02_scl?
    how to find Master datasource for this?
    Many Thanks
    balaji

    AHP hello
    Thanks for info given
    Can v view same for customized datasources also?
    is it possible?
    so for datasource 2lis_11_vaitm,if v click on "Infosource Overview" v can view all the Infosource name,by this v can find our Master Datasource.?
    so for ex.,I can c infosource 0CUST_GRP1,so this is the datasource for Master data from r/3 side?
    Is it correct?
    Many Thanks
    balaji

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

Maybe you are looking for

  • Superdrive not working on brand new imac

    Bought my imac 27 inch two months ago and the superdrive won't play dvds and barely read cds.  I just updated the memory would that have anything to do with that?  I doubt it.  I have only used the drive a handful of times.  So I can't figure it out.

  • Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

    Hi All, Need some urgent help.. Iam facing some issue with the Function Module “'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system. As shown below, in the function module, the Table “IT_PROPERTIES_RESULT” gets populated with some values based on inputs like

  • Recovering image metadata on deleted images

    I deleted images on the hard drive by mistake, does that delete the catalogue data as well? I'm not sure if it does because when reimporting those same images from a backup the image names are changed to xxx.DNG-2 and not xxx.DNG as they were origina

  • Cleaning the Lumia 920

    How would I go about cleaning the edges on my red Lumia? Like, where the red meets the black and that indented edge next to that. Its filled with dirt and grime and dead skin as well, and its very unsightly. Any tips on cleaning it effectively?

  • Brand new HP Deskjet 2540 keeps jamming when trying to print

    I've just bought a new HP Deskjet 2540 and have finally managed to get it set up, but when I try to print something from my laptop (or print a test page from the printer), the paper jams.  A page gets taken down by a third or so, but it goes down twi