Cursor does not switch back from hand to arrow, not an AS problem.

This is a new problem we're seeing at work across multiple flash apps on different sites. Roll over a link (or any action that turns the cursor to a hand) and then rollout, it doesn't switch back. Not everyone has this problem, but a lot of people. We've seen this with versions of the plugin 10.3.181.34 and 10.3.183.7, and others I believe. OS is osx and xp, safari, IE8. Not happening in chrome or FF. Anybody else seeing this? Any flash site is doing this, here's an example: http://www.rpa.com/

I was unable to get my mouse cursor to change at all on rpa.com with Safari, though I have Lion and I believe that might be a different bug. Could you check the following bug to see if it's similar to what you suspect? If so, I'd encourage you to vote and comment. If you feel this is a different issue, please add a new bug to bugbase.adobe.com and post back with the bug URL.
2928740 - [Platform_Mac]System cursor is not shown when it should be when using Safari 5.1
Thanks,
Chris

Similar Messages

Cursor does not click the sign-out button in yahoo, rediff etc pages ?

cursor does not click the sign-out button in yahoo, rediff etc pages. E.G once I open my yahoo page, the cursor pointer will not change it's appearance to the finger type when I try to click the sign-out or inbox button. This does not happen with chrome or explorer.

That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Cursor does not move, Cursor does not move

Cursor does not move, can not be controlled by wireless mouse and normal mouse, Are there any solution for this problem? Thank!

in selecting the word, it is very difficult to just place a cursor in the word to make any correction, because it wants to highlight it and it is near impossible to deselect
The standard mouse/text selection action should only select a word when you double-click it. Therefore you should be able to position the cursor within a word by just single-clicking it.
when I do finally get a cursor to appear instead of a highlighted word, the arrow keys don't move the cursor to where I need it
That certainly sounds amiss. I don't think I've ever seen a case where the cursor keys don't move.
So I'm thinking Leopard must have some preference / key preference thing going on?
There is a Keyboard & Mouse preference pane in System Preferences which is clearly the place to start, but off-hand I can't think which options there would cause this kind of setup.

Cursor does not move.

On my IMAC the cursor does not move, but show connected and the click works. just will not move cursor on the screen. I doen the following.
- replaced batteries
- restarted computer
- unplugged computer and restart
- restart while hold command+options+P+R
oh ya, I did notice my picture for my log on changed.
Please help.
thanks

Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Does the mouse move booted from that partition?
Do you have a USB Mouse to try?

Switch back from Mavericks to Mountain Lion

I have tried to switch back from Mavericks to Mountain Lion, due to the battery drain problem, following the steps included in the tutorial https://discussions.apple.com/docs/DOC-6162
The problem is that when I format the HD and I click on 'Install' it appears a big screen which says 'Install Mavericks". I want to install Mountain Lion (that I have in the pendrive), or at least Lion, but I am unable to do that, there is no option to choose any other operating system. Is there a way to rollback to any previous system?
If not, would it be possible to extract the HD from the computer, format it completely (including the recovery partition) in another computer, install it again in the original computer and perform a clean install from my pendrive?
I have no external drive with Time Machine or similar.
Thanks in advance.

Welcome to Apple Support Communities
If you have got a Time Machine backup created in OS X Mountain Lion, connect the external drive with the backup, hold the Option key while your computer is starting and choose the external drive. Then, select the option to restore the Time Machine backup and follow the steps. Note that your hard drive will be erased.
If your Mac came with Lion or Mountain Lion, you can use Internet Recovery by holding down Command, Option (Alt) and R keys while your Mac is starting up. Use Disk Utility to erase the hard drive and reinstall OS X or restore the backup

Switching back from Verizon Yahoo email to Verizon email - folders

Can anyone tell me if we make the switch back from the Verizon Yahoo mail to the old Verizon email will our folders be preserved? If not, is there a way to make sure our saved items move over? I was thinking moving everything back to the inbox may work but I don't want to mess it up because there are some things that I can't lose.
Thanks!

No, when you switch from Verizon/Yahoo to plain Verizon, your emails and contacts will be lost.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Trackpad is paired but cursor does not respond

OS 10.7.5 on 2009 Mac Pro. My new trackpad shows 43% battery but the cursor does not respond. Also keeps losing pairing. Could this be a battery issue? Someone told me that regular AA batteries sometimes cause these problems and that I shoid use lithium rechargeables (which does not make sense to me). This must be either the batteries or a defective unit. Comments appreciated.

Here are a few notes I have put together about batteries.   If something helps you, fine, let us know.   If not, post back with anything you can add about your problem.
Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems. Apple’s own brand, Eneloop and Energiser appear to be the best.
Rechargeable batteries for a standard Magic mouse are unlikely to exceed eighteen days before requiring a recharge.    Apple may say more in their sales blurb but this is a realistic expectation.   The benefit (if you are organised) is that you will always have charged batteries available.     Regular batteries will give you between 25 and 35 days before they need to be replaced.
Never mix old and new batteries or rechargeable and regular.
Both the above are based on my personal experience, not shutting down my machine and using it for around four hours per day.   Note.   Monitors do not always faithfully report battery strength, particularly with rechargeable ones.
When checking your mouse or keyboard batteries ...
Turn off the device.
Remove the batteries,
Clean the terminals both inside the battery compartment and on the batteries themselves.
Replace or renew both batteries.
Turn on the device.   You should get a blinking green light if the device is paired.
Click the mouse to activate it. The green light becomes steady.

Switch back from windows 7 to ios

switch back from windows 7 to ios

Presumably you mean back to OSX.
You can either locate the Bootcamp utility in the system tray and click it and choose reboot to OSX or you can reboot and hold the Alt key after the chime and select Macintosh HD.

Entering values in TableMaintenance,cursor does not stop at error record ?

Hello,
Very Good Morning!
When creating new entries in Table Maintenance, Cursor does not stop at the error record. It display's an error where the error is. But, cursor will skip to the first field of the record.
Ex : Sales Org, Mater, Sales Obj %, Frist arr date.
Suppose these are the fields available and I want to create a new entry.
When i enter incorrect value in Sales Obj %, it is displaying error message saying that i need to enter correct value. But the Cursor is skipping away to the first field Sales Org.
PLease help what to do...I tried using set cursor. But, I am not sure how to excatly use it and it was not working.
Any help will be appreciated.....
Thanks & Regards,
Krishna Chaitanya

Hello,
This question is not answered.
I want to close this question.

Cursor does not change when hovering over pop-up window link

I created a text link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code.This was done in CS3. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is not set to anything.
<a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
Set your href to "#" or "javascript:;" - the latter is preferred.

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Tool cursor does not change or does not show up

If you change tools in Photoshop but the cursor does not change (or disappears entirely), this indicates a bug in your video card driver. To fix it, you need to update your video card driver.
Sometimes you can fix it temporarily by turning down the hardware or driver acceleration in the properties panel for the video card.

Chris Cox 11/23/02 4:59pm

Cursor does not change during the editing of clips

Hi. I am new to iMovie and am looking for some help. I have imported my clips, put them in my timeline and I want to shorten the clips. According to the movie that is on the Apple web site, when moving my cursor over the line separating my clips, my cursor is to 'change' allowing me to shorten the clip. Well, my cursor does not change. Is there a setting that needs to be corrected. Thanks for any help that can be offered.

Hi konrad - the View Menu DOES have a 'Show Clip Volume Levels" IF you are using iMovie HD!
But according to your Profile you have iMovie 4. Volume control in that version is at the bottom beneath the Timeline Audio tracks.
Hope this helps clear up your confusion.
Better to use the iMovie 4 forum in your case!:-)

Cursor does not change for pop-up window

I created a link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

Hi Todd,
i got the same problem.(cursor not change for pop-up windows) and because i m not an expert in internal html code i did try several solutions to fix it.
The easiest (but also even longer if u need to do severals) is to create a button (withs 2 overflight changing pics) with "inserer", "image survolée"
the "image survolée" can be linked to a pop-up window with the correct effect. To do so highlight the "expected new link to" and on right side task bar ad a "comportement" named "ouvrir la fenetre du navigateur" and optionally choose the size and windows available function of the pop-up. It works even if u need to proceed first with an overflight changing button.
The result is longer to obtain and not absolutely perfect. So I guess it s only an help solution for a single mateer. i would be glad to get another solution with a text link rather than using the overflight button system. Technically it should be better, more efficient and faster to proceed with applying an html code that really makes the text appearing as a classic link to a new windows whatever pop up or full size window. Please let me know if u get further answer to fix this problem.
Many thx and excuse my technical english translation about DreamCs4

Cursor does not follow in garage band

I click on record and the cursor does not move so I can not follow in what part of the timeline I'm, how can I solve this?

Well, I closed Garage Band and reopen it and it solved the issue, go figure!!

Cursor does not switch back from hand to arrow, not an AS problem.

Similar Messages

Maybe you are looking for