Custom class type for Plant material

Is there any way to create a custom class type for plant and material? Any other way to use standard functionality to use classification in material master for specific plan will also work.
thanks,

Hi Rahul,
The Classification data in material master can only be maintianed at Client level and not at plant level.
The standard Class type 001 can be used to create your own classes. Create a class for each applicable plant. Add the applicable characterstics under every class. That way you will be able to maintain plant spceific details when you are adding Objects for the material master.
Regards,
kathir

Similar Messages

Is it possible to maintain two class type for a material

Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

More than one class type for a Material

Hi All,
We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
I searched forum, it is given that, it is possible to maintain different Class types for a Material.
But I tried, I couldn't do that.
Please help me to extend a Material to another Class type.
Regards,
Raja Durai

Hi Raja,
You can maintain different classes for same material.
Go to material master and go to Classification view. Go to Extras->Change class type (F7)
Now you can add a class of different class type.
Please see below snapshots for more details.
Thanks,
Dattatreya N R

Need to find the class type for a material

Hi all,
i need to find the class type for the material.
is there any FM or the table where i have both MATNR and KLART fileds.
Kindly reply asap.
Thanks
Sri

Hi,
There can be multiple class types assigned to a material. You can view this in the classification tab in the material master transaction.
You can pass the MATNR to OBJEK field of KSSK table after using neccessary converison Exit to get KLART(Class Type). It will return you a 3 digit Class type. You can find the description of the class from the class type master table TCLA.
Hope this helps.
Edited by: Priyabrata Samanta on Feb 11, 2008 11:43 PM

Multiple class types for material master classification display default.

Hello,
We are running on R/3 4.7. We use several different class types for our material masters (001 and Z01). The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types. If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001). The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01). The user then has to select the class type that applies to the material master their trying to view. Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
Thanks,
JRW

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

QM Tables for CLASS(Class Number), KLART(Class Type) and MATNR(Material)

Hi All,
is there any table which are having the fields : CLASS(Class Number), KLART(Class Type) and MATNR(Material) in QM.
the above three fields should be in single fields.
thanks,

Hi Gupta,
Go through the AUSP table: Characterstic Values,
IFLOT table : Functional location.
and
KSSKAUSP view for required fields.
by
Prasad gvk.

Multiple Class Type for Material Master

Hello Everyone,
I would like to ask where in configuration can I setup Classification so that for each Material Master it can have Multiple Class Type. (such as 001 - Material Class, 023 - Batch, 300 - Variants). Because currently I can only see 023 - Batch whenever I create a new Material Master.
Thanks.

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

Urgent:Material Type for Packaging Material in WM and MM

Hi
There is a place in SPRO where i can define the material type for packaging.
Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
How can i create a material using this material type? What is the use of material type here?
Whenever i create material in MM01/MM41, i get the standard material type list.
Thanks & REgards
Kapil

Hi,
In T.code: OMS2, you can get standard material type list.VERP is the standard material type for packing material.You can copy VERP and rename to ur material type( as it is ur business requriement or else u can use same VERP)
What is the use of material type here?
With the help of ur Material Type , u can craete material like The material type,will be used while defining the material
master.At that time,in Tcode:MM01,first screen we need to
mention,(material type)it show the nature of material
ex:-engineering product,finished products,semifinished
product,etc.,
It also play vital role on material numbering,material type in comination with plant & valuation class, play vital role in inventory & accoputning.
To Create Material,use t. Code: MM01,
Step-1
Enter Material Code: ( example-Polythene Bag, If External Number Range or leave it blnak)
Enter Industry Sector: ...................
Enter Material Type: ..........................(VERP- Packing)
Step-2
Select
Views you required( like eample:basic data-1, like basic data-2,purachsing, purchase order text,General plant data, accounting-1, accounting-2 etc)
Step-3
Enter Plant,
Enter Storage location
{{{Enter Sales organization & Distribution channel(if sales view selected)}}}
Step-4
You will have views like (example-1, basic data, enter Base unit of measure, material group and other details as required field,example-2,Accounting data, enter valuation class, price control; S or V & price)
Step-5
Save.
Note: Before creation material you must know which Industry Sector, Material Type ur going to use and material numbering is internal or external.
For more, check the following link for creation of material
http://www.synactive.com/docu_e/doc_multi_mm01.html
Regards,
Biju K

PM : Does PM support multiple Class types for Equipment classification

Hi,
Do Plant maintenance support multiple class types for the classification for the equipments.
Our Customer has created his own class type other than 002(Equipment) for the classification and wants to know weather PM supports such class types or not.
Thanks and Regards,
Anuj
Edited by: Anuj Goyal on Mar 13, 2008 10:16 AM

hi
i think you can use the your own class type provided you have done all the settings related to the standard class type 002,also if you have create your class type your standard class type will be changed to either the newly created one or 002 based on settings made by you
regards
thyagarajan

List of sales condition types for a material

Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.

Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks

Implementing a custom process type for a process chain

I have created a custom process type for a process chain that allows a user to send back a failure or error status when calling an ABAP program. I copied the class that is used from the existing ABAP process type as a template.
The process type works fine, I just cannot find out how to recreate the documentation for my custom type using free text. When you maintain the process type there is a field for the documentation object, but I can't find where in SAP to implement this.
I have tried looking at the document maintenance using SE61 and looking into the class documentation from SE24 with no success. The only detail that is provided in the SAP help portal is:
"If necessary, assign a documentation type and a docu. object to the process type. The docu object can be called up via F1 in the process chain maintenance overview tree. "
Does anyone out there have any experience with this that can push me in the right direction?
Thanks,
Eddie

You can create and maintain system documentation from transaction SE61. This is how you would create documentation for a process type or if you wanted to create a book. <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a4/d47df949e111d189730000e8322d00/frameset.htm">more info</a>
Here are the steps to make your documentation similar to that used for the ABAP process type:
From transaction SE61:
-Create a document of type TX (either from scratch or by copying RSPC_ABAP which is used for the SAP-delivered ABAP process type)
-Make any changes you need. I suggest downloading the document in ITF format and make the changes in a basic text editor and then uploading your changed document. It's a little easier to tell what is going on that way.
Now on to transaction RSPC.
Once you save your changes, go to RSPC and select on any chain you have to get into the "plan and check views of process chain maintenance." Then just go to Settings -> Maintain Process Types.
From here you can select your process type, select TX from the document type dropdown, and then enter the name of your document in the docu. object field.
Hope that helps.

How can we change the valuation type for a material created.

How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guide

Hi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Settings for costing data in order types for plant maintenance

i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object. Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
Assign points as a way to say thanks.
Madhav Nanduri

How to find condition type for a material???

How to find condition type for a material??

Hi Suman.
Refer the following
tcodes:http://www.tcodesearch.com/sap-tables/search?q=condition+types
and http://wiki.scn.sap.com/wiki/display/Snippets/Get?original_fqdn=wiki.sdn.sap.com
Please search for condition type with pricing condition/pricing procedure.
Regards,
Kannan

Custom class type for Plant material

Similar Messages

Maybe you are looking for