Custom date validation format for dff field

requirement -
dff has a specific date time format different from the standard valuesets for date-time stamp available in apps. So if the user enters the incorrect format, it should do the validation.
Format needed for dff is : 2012-04-30 15:46:35
I tried a couple of thigs but dint fork . How do I do it.
any suggestions ?
Thnks

This topic was discussed many times in the forum before, please see old threads for details.
https://forums.oracle.com/forums/search.jspa?threadID=&q=dff+AND+Validation&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=dff+AND+Validate&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=dff+AND+Validation+AND+Personalization&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

Invalid date format for 'Created' field in the getVersions web service Response.

Hi all,
I am trying to get all versions for selected document by calling getVersions method Versions.asmxweb service, but getting ‘Created’ date attribute value is in the format "29-05-2012 12:01"
but I am expecting either one of the following date formats.
1.      yyyy-MM-dd HH:mm:ss or yyyy-MM-ddTHH:mm:ssz
2.      MM/dd/yyyy HH:mm a   (a means AM/PM)
3.      MM/dd/yyyy
4.      yyyyMMdd HH:mm:ss
where do I need to change?
what are all the formate will be support by SharePoint?
please find attached response xml of getVersions call.
<results xmlns="http://schemas.microsoft.com/sharepoint/soap/">
    <list id="{6A6F6CD1-2E9C-44CC-B1F5-56G7JB5C8778}"/>
    <versioning enabled="1"/>
    <settings url="http://hbngjfgj47s20/reg/_layouts/LstSetng.aspx?List={7S6F6CD1-2E9C-44CC-B1F5-KO9J8Y7Y6H78}"/>
    <result version="@0.3" url="http://vmesxsrv47s20/register/Shared Documents/Parent/child/my_doc" created="29-05-2012 12:01" createdRaw="2014-12-02T12:46:02Z" createdBy="my_dom\agi_sharepoint"
createdByName="AGI_Sharepoint" size="288" comments=""/>
    <result version="0.1" url="http://hbngjfgj47s20/register/_vti_history/1/Shared Documents/Parent/child/my_doc" created="29-05-2012 10:01" createdRaw="2014-12-02T10:55:18Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
    <result version="0.2" url="http://hbngjfgj47s20/register/_vti_history/2/Shared Documents/Parent/child/my_doc.txt" created="29-05-2012 11:01" createdRaw="2014-12-02T10:59:25Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
</results>
Kindly help me on this.

Hi,
According to your post, my understanding is that you want to change date format for ‘Created’ field in the getVersions web service.
Per my knowledge, you can get the date format for ‘Created’ field as “MM/dd/yyyy HH:mm a”.
For more information, you can refer to:
Versions.GetVersions Method (Versions)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Order Import - Validation failed for the field - End Customer Location

I am trying to import an order using standard import program and it is failing with below error:
- Validation failed for the field - End Customer Location
I have checked metalink to debug this and found nothing, the values i have used to populate the interface table or valid.
Can someone please post your views on this, on where the problem might be.
Thanks!

Hello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif

Order Import Failed in OM : Log Validation failed for the field - Ship To

Problem in Order Management
When i tried to do Order import in Source Org logfiles shows the Message :Validation failed for the field - Ship To, Please if anyone have a solution of this.
Thanks in advance.
Regards,
Rajesh Verma
Senior Consultant- Oracle Apps.
COLT

perhaps you might want to try populating customer_id instead of name to make sure that there is no error on typing customer name.
primary ship-to and bill-to must exist under this customer. During order import, if ship-to is not specified then import will fetch primary ST of customer.
This is what we use to populate interface table -with mininum of data.
INSERT INTO oe_headers_iface_all
(orig_sys_document_ref,order_source_id,org_id
,order_type_id,payment_term_id, shipping_method_code, freight_terms_code
,customer_po_number,salesrep_id
,sold_to_org_id, ship_to_org_id,invoice_to_org_id,sold_to_contact_id
,booked_flag
,created_by, creation_date, last_updated_by, last_update_date,last_update_login
,operation_code, order_category
,attribute5,tp_attribute4,xml_message_id,xml_transaction_type_code
,request_id, error_flag)
INSERT INTO oe_lines_iface_all
(order_source_id, orig_sys_document_ref, orig_sys_line_ref,orig_sys_shipment_ref
,inventory_item,item_type_code,line_type_id
,top_model_line_ref,link_to_line_ref,component_sequence_id,component_code,option_flag
,ordered_quantity
,order_quantity_uom,salesrep_id
,created_by, creation_date, last_updated_by, last_update_date,last_update_login
,operation_code,cust_model_serial_number,line_category_code
,context,attribute6
,reference_type, reference_line_id, reference_header_id
,return_context, return_attribute1, return_attribute2
,return_reason_code
,tp_attribute1,tp_attribute2,tp_attribute3,tp_attribute4,tp_attribute5
,request_id,error_flag)

Validation failed for the field - Bill To Contact, Ship To Contact

Hi,
When I am trying to Import / enter order for a specific customer, i am getting the error.
VALIDATION FAILED FOR THE FIELD - BILL TO CONTACT
VALIDATION FAILED FOR THE FIELD - SHIP TO CONTACT
Has anyone got this error earlier? If you know the resolution, please update me on this.

Hi,
I am getting following error when I an adding one customer address to another customer through Order Import Program. By populating 3 table values
1. OE_CUSTOMER_INFO_IFACE_ALL
2. OE_HEADERS_IFACE_ALL
3. OE_LINES_IFACE_ALL
Error Message:
Duplicate SHIP_TO ADDRESS found for IC_804810. Please correct the data.
Duplicate BILL_TO ADDRESS found for IC_804810. Please correct the data.
But its working fine when I am giving New address for existing customer.
Please help me on this....
Thanks,
Oracle Support.

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

OBIEE Presentation Services : Default formatting for numeric fields

Hello all.
I need help in setting default formatting for numeric fields in criteria. If a user adds an numeric field, it does not have any formatting associated with it. I want to know how do you set default formatting (for example if user adds sales measure it should appear in default format like $1,000 or even with decimal places).
Please help.
Thank you.

Hi,
1) We have so many subject areas. If we select "system wide default for this data type", is this change going to reflect in all subject areas.No should do this subject area wise.
2) Will this effect if we migrate from dev to prod environment.Yes it will effect.
I hope u will follow this to-
http://forums.oracle.com/forums/ann.jspa?annID=939 :)
Regards,
Srikanth

How to handle "Validation failed for the field - Tax code" issue?

We had mass uplaod the order that create on Mar with tax code effective date on Apr. Now we would like return on this order and getting error of "Validation failed for the field - Tax code". How to handle this issue?

Hi
You will have to check if the Tax_Code of RMA being received is the same as the one in the related sales order.
If not you will need to use the same tax_code.
Refer below document : Doc ID 1584338.1

How to make custom data validation on standard form.

Hi,
I have some little OAF experience. I have extended VO so far but I am still newbie.
I need to make custom data validation on standard form.
I Oracle Credit Management module on "Create Credit Application: Applicant" form I need
to validate chosen currency against customer setup (whether there is customer profile amount for the currency).
The page is /oracle/apps/ar/creditmgt/application/webui/ARCMCREDITAPPPAGE
There are controllers on the page:
oracle.apps.ar.creditmgt.application.webui.creditAppContentFooterCO 115.14.15104.2
oracle.apps.ar.creditmgt.application.webui.creditApplicationPageCO 115.6
oracle.apps.ar.creditmgt.application.webui.creditAppRegion2CO 115.13.15104.2
oracle.apps.ar.creditmgt.application.webui.creditApplicationCO 115.8.15104.3
oracle.apps.ar.creditmgt.application.webui.creditAppRegion1CO 115.28.15104.4
oracle.apps.ar.creditmgt.application.webui.creditAppBusBackCO 115.6
oracle.apps.ar.creditmgt.application.webui.OCMApplicantInfoRNCO 115.4
creditApplicationPageCO is pageLayout controller.
Please direct me how to achieve it.
Which controller should I extend (if any)?
How to get values from the page (customer site id, currency) and how to run custom sql in my CO class ?
Regards,
Marcin

Hi Marcin,
You have to find your GO button is handled in which standard controller, (if you click on the about this page, you should be able to identify the controller,
or you can download all the controller .class files and decompile and check the logic).
Then extend that controller(which has the Go button logic, you can see how it has been handled.),
The usual way to check is
if(pageContext.getParameter('<Go button name>') !=null)
Since you want to validate first your custom validation, in the extended controller ProcessFormRequest
dont call the super.processFormRequest unless your validation is success.
Call the super at the end.
Inside your extended controller you have to find your AM and then your required ViewObject to get the user entered values.
Thanks,
With regards,
Kali.
OSSi.

Customer Data Hub Required for EBS 11i?

Is the Customer Data Hub required for EBS 11i to work correctly? It appears to be a supplemental product and not a required core product.

Oracle Customer Data Hub (CDH) is not a mandate for EBS users. However, it solely depends on the Organizational needs. If an Organization decides to have SSOT (Single Source Of Truth) for it's customer data they can go with CDH solution.
CDH is a complete packaged solution that allows companies to create a single, enterprise view of their customer base, by consolidating/synchronizing customer data from heterogeneous systems into a central, operational, data store. CDH alone will not suffice the requirement. CDH ties with Oracle Customers Online (OCO), Customer Data Librarian (CDL), and the Oracle Trading Community Architecture (TCA) to create a robust, scalable, central repository of duplicate-free, enriched data across a heterogeneous landscape.
Hope this helps.
Regards,
ND

Parts Requirement Create Order Error:Validation Failed for the field - Shipping Method DHL

Trying to create Parts Requirement.
Error message on clicking "Create Order" button: "Validation Failed for the field - Shipping Method DHL"
Please suggest the Setup that needs to be done for this.

Kinck
The same script worked for me in vision (R12.1). You may have issues with your defaulting of a number of attributes that you are not passing in the API (like price list, line type and so on). You may want to check them.
Thanks
Nagamohan

Asterisk format for password field.

Hello every one.
I have to create 'PASSWORD' field in screen painter but this field should be in encoded format
shows with '******' (asterisk).
How can I create asterisk format for PASSWORD field in module pool?
How can I show this type of field in runtime environment?
The screen element for password is input/output field.
Ex:- I have created username and password field in module pool screen programming (screen same as login screen of SAP) but I have to shown password field in encoded format menas with asterisk.
Waiting for your opinion....
Thanks
Regards
Anukul

Hi,
Make the pass word field as invisible in the screen painter.
Thanks,
Sri.

Date format(for number fields)

Hi there.
I'm creating some sql queries wich will be executed by some users throught the Oracle client PL/SQL, and I need to format some fields in date format.
Those fields are NUMBER(8) and they are in that format: "YYYYMMDD"
The format I want to put that information is: "DD.MM.YYYY".
What's the easiest way to do that?
The version that I'm using is Oracle 9.2.0.4.0.
Thanks by the way.

Hi,
Use TO_CHAR to convert the number to a string,
use TO_DATE to convert the string to a date, then
use TO_CHAR to format the date.
TO_CHAR ( TO_DATE ( TO_CHAR ( numeric_column
                            , 'fm00000000'
                  , 'YYYYMMDD'
        , 'DD.MM.YYYY'
        )This shows why storing dates in some other kind of column is a bad idea.

Periodic alert for DFF field update

Hi Everyone,
We need to builde the periodic alert for below requirement.
We have DFF field for status (Submitted/ Not Submitted) which is maintained in Attribute13 in per_all_people_f.
First alert will fire on update of this DFF to Not Submitted which is straight & simple.
We need to have weekly alert from the time this field is changed till the time it changed to submitted.
once it is changed to submitted no aler will fire.
I was thinking of having custom table with status & update date but this will require to build 3 alerts.
Can anyone suggest some better way of doing it?
Thanks
Deepali

Hi,
One option is to use standard AuditTrail functionality on that field, then you'll have the entire chronological history for the field to work the periodic alert logic from.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Source Data file format for FDM

Hi,
I am new in FDM and have couple of question on data loading.. We are using FDM to load the data in Essbase. Please help me on these-
Question 1:
In source data file, suppose, we have around 300 account members and around 100 PO numbers. There are multiple 'PO numbers' records for each 'account member'.
As per our requirement, we need to sum up the all values for 'PO number' column for each account.
For example, suppose, we will get data file as below. Here, Important point is, I don't have dimension for 'PO number ' in Essbase. I will get the accounts data corresponding to 'PO number' but there is no dimension in Essbase to store data at 'PO number' level.
Account column PO number Actual Estimated
A001 P0123_10 10.00 15.00
A001 P0123_20 20.00 25.00
A002 P0123_30 30.00 35.00
A002 P0123_40 40.00 45.00
A002 P0123_50 50.00 55.00
A003 P0123_60 60.00 65.00
A003 P0123_70 70.00 75.00
A003 P0123_80 80.00 85.00
and so on
Now we want to sum up the data for each Account member i.e
Account column Actual Estimated
A001 30.00 40.00
A002 120.00 135.00
and so on ---
As per my understanding, While defining the *'Import format'* for this source data file , we will not consider the column for 'PO number' and will define the mapping with merge option. Hence, multiple record for each account will be accumulated.
Please suggest me on this.. Is my understanding correct or how will handle this type of scenario?
Question2:
Suppose, we have data for multiple scenarios ( i.e. Actual, Estimated etc) in one excel sheet, which will be used in FDM as a source file? As per admin guide, we have POV for Category and data will be loaded for that selected POV only. In this case, will FDM consider the data for each selected POV scenario or how FDM will function in this case... do we need to have separate files for each scenario...
Please help me to solve these problems...
Thanks & Regards,
Mohit Jain

QUESTION1: If you ignore the PO field in the import you will get the accumulating behaviour you describe. Not sure what you mean by using merge in the mapping. The default behaviour of FDM is to accumalate all non-unique lines following the mapping process you don't have to set anything
QUESTION2: Data will only be loaded to the selected Category in the POV if you have data in the file that needs to be targetted at a different scenario you will need a seperate load file containing that data and choose the alternate category in a seperate manual workflow process

Custom date validation format for dff field

Similar Messages

Maybe you are looking for