Custom E-Recruiting screen

We need to create a Custom E-recruiting screen.  The new BSP page will have drop-down; text-box; etc.
The box's need to be dynamic meaning than when the user input his information and clicks the save button - the information get saved in an already defined infotype.
Please give suggestion and code sample in how to connect box's to an infotype.

HI  Divya Jain,
I am having same problem. I was looking your answer I think it may help. Just to confirm, in my case should I make it X too in the value?
I have four TRSP:
TRSP    ADMIN   X
TRSP   CORR
TRSP   STOBJ
TRSP   WFOBJ
I Don't have X after CORR. it is going to fix the issue? did you follow any note?
Here is my dump:
ShrtText
    Screen output without connection to user.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSPO4" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
Error analysis
    During background processing, the system attempted to send a
    screen to a user.
    Current screen: "SAPLSPO4 " 0300.
Please reply ASAP.
Thanks,

Similar Messages

  • Transaction similar to  S_ALR_87012177 (Customer Payment History screen)

    Hello Gurus
    Do you know some other standard transaction similar to S_ALR_87012177 (Customer Payment History screen) ?
    Thanks in advance

    You can see in FBL5N with cleared documents.
    Even you can check with FD10N.
    S_ALR_87012198.
    If it helps please reward points.

  • Update Z table from Custom pop up screen

    Hi All,
    I need to enhance  CC01 transaction.
    CC01 is used to create Change Numbers.
    My requirement is when Profile(Input field in CC01) is entered into initial screen of CC01 and enter key is hit, a custom pop up screen should be raised. This pop up screen will have 10 input fields from Z table. So when the user enters values in the input fields of pop up screen, I need to capture these values. When processing of CC01 is complete and saved system generates a Change Number, then I need to update the Z table with the values from custom pop up screen to the corresponding Change Number (Generated after Save)in Z table
    I have found the customer enhancement for raising Pop up screen pccd0005 (EXIT_SAPMC29C_006).
    My problem is how to link the pop up screen values with the Change number and update the Z table.
    Change Number is generated after CC01 Save.
    Can any one help me how to achieve this functionality?
    Thanks in advance
    Bhasker

    <u>Syntax:</u>
    EXPORT param_1 TO MEMORY ID 'EXIT_PCCD'.
    IMPORT param_1 FROM MEMORY ID 'EXIT_PCCD'.
    FREE MEMORY ID 'EXIT_PCCD'.
    Please look into the F1-help on Export/Import statements for more details.
    Message was edited by: Sam

  • Adding custom functionality sub screen in transaction IW51

    HI,
    Bussiness needs to add a custom functionality sub screen in header tab of transaction code IW51.
    Please suggest if anybody worked on this issue.
    Provide me if any screen exits are available in IW51 and how to implement the screen exits.
    Thanks,
    Radhakrishna

    hi,
    i dont think for this application SAP has good solution, we went for Z developments on this modules.
    any how checkout....
    SPRO>Quality management>Notification --> Overview of notification types --> Select the notification & 90 give the customer specific screen area
    Subscreen Number for Customer Screen Area "Notif. Header"
    Specifies the customer screen area that you can activate on the main notification screen using the SAP enhancement if you are working with the screen area '090' (customer subscreen (one screen/NTyp)).
    If you want to use more than one customer subscreen in your notification type, use the screen area '091' (customer subscreen (>1 screen/NTyp)). Assign the screens directly to the tab pages.
    Thanks,
    Shailaja Ainala.

  • How to: Create a custom search result screen?

    Hello,
    Is it possible to create a custom search result screen?
    I need it because the users must be able to directly e-mail
    the items or a selection of the items returned by the search.
    For this modification of the standard result page isn't sufficient.
    Thanks,
    Steven.

    Steven, please see:
    http://technet.oracle.com/products/iportal/files/pdk/plsql/doc/sdk23pkg.htm

  • Standard Error Messages in Custom Change Password Screen

    Hi All,
    I've developed a custom change password screen in Web Dynpro. I want to use the standard messages that appear in the portal logon screen. I looked in the portal logon par and got the umelogonbase.jar and found in my eclipse dir the com.sap.security.core.jar wich this last one depends. I put then in an externallib and wrapped them in a JEE lib. Declared dependency from my WD DC to the JEE lib and added the library reference in the WD DC.
    I have the following code:
    try {
         IUserAccount userAcc = UMFactory.getUserAccountFactory().getUserAccountByLogonId(wdContext.currentInfoElement().getLogon());
         userAcc.setPassword(wdContext.currentInfoElement().getOldPassword(), wdContext.currentInfoElement().getNewPassword());
    } catch (UMException e) {
         e.printStackTrace();
         error = true;
         LogonMessageBean bean = new LogonMessageBean(WDClientUser.getLoggedInClientUser().getLocale());
         String msg = bean.print(new Message(e.getMessage()));
         wdComponentAPI.getMessageManager().reportWarning(msg);
    But when I try to execute my app I get the following exception:
       java.lang.VerifyError: (class: com/cafedecolombia/ols/um/ChangePassword, method: test signature: ()V) Incompatible object argument for function call
        at com.cafedecolombia.ols.um.wdp.InternalChangePassword.(InternalChangePassword.java:109)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
        ... 28 more
    Does anyone has successfully done this? Is there any other dependencies? Is there an EASIER way to do this? Is there any initialization needed?
    Any help will be highly appreciated.
    Regards,
    Andrés Acero

    Ok so here is how I solved it.
    I found this very interesting article called "SAP Authentication Guideline" and there the author mentions that the messages are defined in class SecuritPolicy of the core security jar. So with that in mind this is how my code finally worked out:
    try {
         IUserAccount userAcc = UMFactory.getUserAccountFactory().getUserAccountByLogonId(wdContext.currentInfoElement().getLogon());
         IUserAccount mutableUserAcc = UMFactory.getUserAccountFactory().getMutableUserAccount(userAcc.getUniqueID());
         mutableUserAcc.setPassword(wdContext.currentInfoElement().getOldPassword(), wdContext.currentInfoElement().getNewPassword());
         mutableUserAcc.commit();
    } catch (UMException e) {
         e.printStackTrace();
         error = true;
         ISecurityPolicy policy = SecurityPolicyFactory.getInstance().getSecurityPolicy();
         wdComponentAPI.getMessageManager().reportWarning(policy.getLocalizedMessage(WDClientUser.getLoggedInClientUser().getLocale(), e));
    Here is a link to the article on SDN:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/599ab890-0201-0010-12a1-b988e3a09735
    If you have any comments please do.
    Cheers,

  • UIImagePickerController Custom Overlay Black Screen issue while using Video trimming controller

    Hello Everyone ,
    I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
    The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset  image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
    Handler Method ::
    [self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                                  completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                      AVAssetImageGeneratorResult result, NSError *error) {
    I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
    This issue occur in ios7 but not in ios6.
    Can anyone have any idea about this ...Please relply me ASAP.

    Hello Everyone ,
    I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
    The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset  image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
    Handler Method ::
    [self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                                  completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                      AVAssetImageGeneratorResult result, NSError *error) {
    I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
    This issue occur in ios7 but not in ios6.
    Can anyone have any idea about this ...Please relply me ASAP.

  • Adding custom fields in screen

    I have added two custom fields in QUOTATION(VA21) in additional data tab B...when i create quotation for a particular sales order i am getting the fields in VBAK table and the issue is while creating sales order for the same i have to get these field values automatically in the screen but i m not getting this ......how to do this?
    Can anyone help me in this?

    Hi,
    It seems that you have added in BADI/EXIT where it is specific to Quotation. Hence these fields are not visible in the sales order. Or there might be some restriction only to the transaction VA21.
    Please search and check the correct BADI for the sales order.
    May be you need to add the same code once again in another BADI.

  • How to add New fields to Customer Master Record Screen

    Hi All,
    As per our business requirment we need to add some new fields the BP screen.
    Could you suggest me how can I customize the new fields in BP creation screen.
    I change the screen sequence with the help of VCT, but I need to add some more new fields. Your suggestions will be highly appreciated.
    Thank you and Best regards

    Venkat,
    Your best bet is to read the documentation at:
    http://help.sap.com/saphelp_crm40/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm
    This gives you an overview of the Easy Enhancement workbench.
    Your steps to use it will be the following setup the customizing in transaction EEWC.  You can search this forum for help on how to setup this customizing.
    Then create the new extension using transaction EEWB, and follow the steps in the help documentation above, also read note: 484597.
    After you have read the doucmenation, and if you get stuck, then let me know and I will try to answer those questions.  The EEWB is very simple, so I don't think you will have too many problems using it.
    Good luck,
    Stephen

  • Adding field from Custom Infotype in Screen Header-PA30

    Hi all,
    Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
    Please guide.
    Thanks in advance.

    Hi,
    When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
    Hope this helps.
    Donnie

  • Data in the structure clearing when chicking custom tab in screen exit

    Hi All,
       I am working in screen enhancement for WZR1(payment document).Here in header details the custom screen will appear under additional fields tab.
    I have appended the custom fields in structure KOMLFK and table WBRK.here when i debug the screen program the values entered in screen fields are stored in the structure fields but when i click the custom field tab the data in the structure during run time are cleared, But after if click other tabs again the data are coming in structure fields in debug mode.
    because of this i am not able to do any validation by comparing custom fields and other fields.GET Parameter id is also not getting the exact screen field values because of this.
    Please help me what would be the problem here.
    Thanks,
    Arun.
    Edited by: Arun Kumaran on Feb 24, 2010 7:14 AM

    Try to export the structure values to memory id whenever available and try to import the structure values from memory id whenever required.

  • How to set focus on a custom PO Item screen field when in error?

    Hi All,
    I have an interesting situation that i'm wondering if others have solved.  We have extended the PO item table (EKPO) by adding two new fields.  We then have implemented two BAdI's:  ME_GUI_PO_CUST and ME_PROCESS_PO_CUST to add them to the ME21N/ME22N/ME23N screens and logic to do some validation, via these respective BAdI's mentioned.  Everything works perfectly - with one small issue.  When we are doing some validation via a method on the ME_PROCESS_PO_CUST - and "invalidate" the field (and throw an error) when it is in error - I also want to be able to "set focus" on the field in question (basically: go to the particular tab on the ME* screen and highlight the field).  I have tried using SET CURSOR FIELD *****  within this BAdI (ME_PROCESS_PO_CUST) - but doesn't seem to work.  Has anyone tried to do this and have come up with a solution?  Would be much appreciative if you shared it!!!  Thanks much.
    Cheers,
    Matt
    ERP version that we have is:  ECC 6.0

    Just have a look at oss note 310154 - ME21N/ME51N: Customer-specific check, generating error log.
    In short:
    Add your error messages in EXIT_SAPMM06E_012 (using specific macros).
    Sample code (provided in Oss note) :
      loop at tekpo where knttp eq 'X'.
        loop at tekkn where ebeln eq tekpo-ebeln and
                            ebelp eq tekpo-ebelp and
                            kostl eq space.
          if not tekkn-id is initial.
            mmpur_business_obj_id tekkn-id.
            mmpur_metafield MMMFD_ACCOUNTINGS.
          endif.
          mmpur_message_forced 'E' 'ZE' '777' '' '' '' ''.
        endloop.
      endloop.

  • Retrieve the sales orders for a particular customer in selection screen

    Hi
    I want to retrieve the sales orders for a particular customer(entering customer number field in the selection screen and then clicking on f4 help on sales order field in the selection screen I should get only sales order numbers for that particular customer number).How can I achieve this through search helps?Are there any standard search helps that I can use.
    <removed_by_moderator>
    Edited by: Julius Bussche on Apr 9, 2009 12:55 PM

    Hi,
    try this:
    at selection-screen on value-request for p_par.
    select * from vbak
    into itab
    where kunnr = p_par.
    then use the FM 'F4IF_TABLE_VALUE_REQUEST'.
    with
    retfield = 'VBELN'
    dynprog = sy-repid
    dynpnr = sy-dynnr
    dynprofield = <name of parameter>
    value_org = 'S'
    tables = itab.
    Regards,
    Leo.

  • Enhancement for COR1,COR2,COR3 -  PPCO0020 - to add custom field on screen

    Hello Experts,
    My requirement is to add a custom tab and in that a custom field for TCODE COR1. I have done this by creating a project from cmod for enhancement PPCO0020.
    Added the custom field to table AUFK and structure CAUFVD. the field name is KDAUF_AUFK1 and on the custom screen created an input field from structure, so the screen field is CAUFVD-KDAUF_AUFK1.
    Now when I try to code the Exit  EXIT_SAPLCOKO_006 with the below code
    E_COCI_AUFK-KDAUF_AUFK1 = KDAUF_AUFK1.  
    it does not store the data into the table AUFK.
    Can any one throw some light on this.
    Thanks,
    Jaya.

    A similar job explained in the document here. IWO10018: User Fields in Maintenance Order   Draw clues for your issue from the things mentioned in Step3 of this document for storing the values in the tables. Here tables are equated not fields.

  • Imac 27inch custom built flicker screen solution??

    Dear friends and apple support team,
    i have imac 27 inch custom built and it have the same issue with screen flickering and the local supplier change the machine with a new one and after using the new machine fir one day only the same issue has been happened.
    so please let me know how i can fix this issue?
    thanks

    Only if they are wrong about the screen or motherboard being broken.
    How old is it? And you did not get apple care when you bought it?
    Had you gone to system preferences>energy saver and adjust the time before the screen sleeps?
    The "turns back on" kind of is a bad sign for you though... Sorry I am unable to help at ALL.

Maybe you are looking for