Data in the structure clearing when chicking custom tab in screen exit

Hi All,
I am working in screen enhancement for WZR1(payment document).Here in header details the custom screen will appear under additional fields tab.
I have appended the custom fields in structure KOMLFK and table WBRK.here when i debug the screen program the values entered in screen fields are stored in the structure fields but when i click the custom field tab the data in the structure during run time are cleared, But after if click other tabs again the data are coming in structure fields in debug mode.
because of this i am not able to do any validation by comparing custom fields and other fields.GET Parameter id is also not getting the exact screen field values because of this.
Please help me what would be the problem here.
Thanks,
Arun.
Edited by: Arun Kumaran on Feb 24, 2010 7:14 AM

Try to export the structure values to memory id whenever available and try to import the structure values from memory id whenever required.

Similar Messages

How to make reference wbs custom data carried to new wbs when using custom tab and custom table

I created a custom tab for WBS elements by using user exit CNEX0007 and custom screen and put a table control in it.
As table control's data has to be stored in a table I could not use append structure of PRPS.
When I used reference wbs, PRPS custom fields were carried also but I could not find any solution to fill table control data with reference table.
I need to get correspondence between reference number's and new id's key data. Is there any exit, enh. that I can store the relationship.

Solved...
I've used an enhancement point in include LCNPB_MF38. CJWB_SUBTREE_COPY exports a table called newnumbers. Here you can find correspondances between copied WBS and new WBS.
Exported table to memory id.
And imported it in another user-exit. You can use proper user exit for your need. ( EXIT_SAPLCNAU_002)

Get the data from the structure OR View

Hi All,
how wud i take data from the structure OR View? when i m writing the select query then its saying that its not defind in data dictionary.
I hav the requirement to develop a report for PM module..
in that i hav all structure like AFVGD,CAUFVD,PMCOEA...
Plz tel me how to write a select quary for this...

Hi,
You cannot select data from a structure.
A structure / work area contains data only at the run-time.
You can select data from views and tables.
The data you need to select will be in Database tables. All you need to do
is to find those table and select from there.
Let me know if you need further help.
Regards,
Rajat

Can only get the "Draft" stamp when insert customer stamp with C#+JS

I am trying to insert customer stamp in batch files with C#+JS.
My JS works well in Acrobat. However, it doesn't work when use C#+JS. I always get the Acrobat's "Draft" stamp other than my own ones (the AP value is confirmed correct).
In c#, it runs as this ( with the objectype.InvokeMember())
1. initial an annotation with addAnnot first and get the properties object with method of getProp().
2. Set the type entry of the properties object as "Stamp"
3. With setProp(), modify the annotation to a Stamp annotation, and then get the properties object of the Stamp annotation.
4. Set the entries (rect, page, AP ) of the properties object. Then use setProp() again to modify the properties of the Stamp annotation.
The program runs without any error message. But I can only get the default stamp "Draft".
One thing I found so far, in JS console in Acrobat, if I set the AP properties AFTER set the annotation type to "Stamp", it also get the "Draft" stamp only. as this,
 annot = this.addAnnot();
 prop = annot.getProps();
 prop.type = "Stamp";
 annot.setProps(prop);
 prop = annot.getProps();
 prop.page = 0;
 prop.rect = [0, 0, 100, 100];
 prop.AP = "#xxxxxxxx";
 annot.setProps(prop);
If I set the prop.Ap before the forth line in above para, I can get the right stamp.
 annot = this.addAnnot();
 prop = annot.getProps();
 prop.type = "Stamp";
 prop.AP = "#xxxxxxxx";
 annot.setProps(prop);
 prop = annot.getProps();
 prop.page = 0;
 prop.rect = [0, 0, 100, 100];
 annot.setProps(prop);
Or, if I set the props in the typcial JS format like below, I also get the right one
annot = this.addAnnot({
type: stamp,
page: 0,
rect: [0,0,100,100]
AP: #xxxxxxxx)});
But, the problem is, in C#, the AP properties can only be set after set the annotation type as Stamp (step 4). I think this might be the reason, but I don't know how to get over this.
Please help. Thanks!

No, it can't – but you could do that yourself as part of the watermarking process (ie. Two watermarks or fields)
From: santa-satan <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 6 Feb 2012 18:35:19 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Can only get the "Draft" stamp when insert customer stamp with C#+JS
Re: Can only get the "Draft" stamp when insert customer stamp with C#+JS
created by santa-satan<http://forums.adobe.com/people/santa-satan> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4190155#4190155

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi ‏76 KB

I am connected to the internet but when i get on my screen is grey and I can't do anything.

I am connected to the internet but when click in safari my screen is grey. I can't clidk on anything nor can I get to another page. What can I do to reset it?
I have tried disabeling my internet and reconnecting but that does not seem to help.

Hi,
It's actually what appears immediately to the right of the word "iPad" that you need to look for. If all you see is the word iPad and no other symbols, then you do not have a data connection to the internet.
If your iPad is a 3G model (withna sim card), you should have a number of connectivity symbols which could be displayed (depending on connection strength). If your iPad is a Wi-Fi only model, you would see the wi-fi symbols appearing indicating wireless connection strength.
Check you are connected to a wi-fi network correctly by launching the settings app and tapping Wi-Fi (near the top of the options which appear), then selecting the appropriate wi fi network which appears on the right.
This article provides some more info and also shows the symbols you should see:
http://support.apple.com/kb/HT1695

Firefox STILL does not open the home page when a new tab is selected

I have just 'upgraded' to FF4 and expected that the irritating 'new tab homepage load situation' would have been resolved by now: sadly, it looks to STILL be around.
MS IE has been loading the homepage DIRECTLY when a new tab is selected for about FOUR YEARS now, so I'm staggered that such a simple but very useful feature is not available in Firefox.
The obvious question is WHY??
In IE, you don't have to keep hitting the home page button to carry out a search in google when a new tab is selected, and IE does NOT need an 'add-on' to incorporate this functionality; it really is quite irritating that the function is still not built-in to FF, and the coding requiret to incorporate the function ain't rocked science Mozilla people - WHY has this not been put into effect by now?

Some people prefer a blank tab because it takes no time to load. Some people prefer their home page. Some people prefer a list of most frequently used sites. It would be convenient if all of these options were built in, but obviously no one stepped up and made it a priority.
By the way, another way to search in a new tab is: Using the search box (on the toolbar), after typing your query, either press Alt+Enter or Ctrl+click the magnifying glass. This opens the search in a new tab and saves that step.

The plotted data on the graph disappear when clearing graphs!??

Hi folks
I got this vi, with two graphs, and one chart. I got this chart coz i want the data plots to strip in the graphs.
but when the VI runs, and i pres stop and run again, the data plot disappears, they are then beeing plotted in the back ground or something like that.!
Also when clearing the graphs the data plottet disappears.
How can I overcome that ?
regards
Zamzam
HFZ
Attachments:
FlowReadChartHist1_mod2.vi ‏79 KB

Hello Zamzam,
same again:
1) I click "Clear" when the graphs are not filled with data: graphs are cleared, new data appear from left and fill the graphs.
2) I click "clear" when the graphs are "filled" (the x-scrollbar shows
more data the display is showing): graphs get cleared, new data appear
from left and fill the graph again...
3) I click "stop" at any time: vi stops, actual display stays.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Data in the table changes when multiple users try to submit data

I have a dynamic table. The table is created in the wdDoModifyView. The user can load data into the table from an excel file. So I have a "Load" button that loads the data from the selected excel file to the table. I also have a "Submit" button. This "Submit" button converts the data to an xml file and make a call to an oracle stored procedure for validation check. If there's an error it will be returned and displayed to the user. If none, a summary of data for posting will be displayed to the user. If the data is correct and the user hit the ok button, the same data will be return to oracle sp for loading in the table.
The problem we encountered is when multiple users are loading and submitting at the same time, the data displayed in the dynamic tables changes after clicking the ok button. It is as if, the table displays the data being loaded by other user.
This is an error that is difficult to recreate. This doesn't happen all the time. I hope you somebody could enlighten me why this is happening. I'm not sure if it has something to do with multithreading or session.
Edited by: Marlyn Agco on Apr 14, 2009 3:57 PM

Hi Armin,
Did you mean storing view instances in static references and accessing them outside the wdDoModifyView is not a good idea? In wdDoInit the nodes are dynamically created according to the xml file being returned by the database. This node is stored in a static variable which is also used in wdDoModifyView to create the dynamic table.
What do you suggest? We're still encountering same issue when multiple users are uploading data.

Asset value date at the asset posting when using F-90

Hi,
I have an asset and the first acquisition date was 10.30.2009.
I'm using the transaction F-90 (external aquisition with vendor) with posting key 50 for credit entry, 70 for debit asset and the transaction type is 100.
Why the asset value date at the asset posting is equal first acquisition date (10.30.2009)? If I'm posting 12.17.2009 the asse value date woudn't be 12.17.2009?
Regards.

Hi
The first Acquisition Date will be the Asset Value date.
When ever you going to do more Acquisitions they will be added on to that Acquisition Amount but on the Particular Dates of Acquisitions and Asset Value Date will remain the same as First Acquisition date.
Whether you do Acquisitions using F-90 or through Settlements, the Asset Value Date will be the 1st Acquisition Date.
regards
Venkat

How to convert a note in pdf and put the data in the structure SOOD4

Good day!
I'm using CONVERT_OTFSPOOLJOB_2_PDF.
This function SO_DOCUMENTS_MANAGER selects a note from uploading and fills the structure SOOD4 with the file data.
Need to do this automatically, convert to pdf and fill the structure SOOD4

If I got your point correctly, you may use the function module SO_OBJECT_CREATE. Take a look at the thread below for an example on how to use it.
Attachments to Material Master
Regards,
Felipe

If you check the don't show this again box when closing multiple tabs, how do you get it to warn you when closing multiple tabs, or to save previous tabs? Checking the warn me when closing multiple tabs box under tools/tabs does not work to solve this?

I accidentally checked the do not ask me again box when closing multiple tabs. Now I no longer get a warning when closing multiple tabs, and it saves my previous session. I have tried checking and un-checking the warn me box under tools which has not worked. If I open a second window and try to close multiple tabs it will warn me but not on the first window.

You can reset the warn prefs on the about:config page via the right-click context menu.
browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Bypassing the replace prompt when replacing a file that already exits

I want to bypass the "replace prompt" when replacing the file I know already exits. In the program when I ask it to replace 1 file I know it needs to replace several other different files. I just want one original promt to replace the file and all other to be bypassed and just have the program replace the file without a promp. The program uses several "write characters to file" vi and several write to spreedsheet file" vi.

you can edit the write to spreadsheet and write characters nodes, they are plain VIs.
Now simply wire a False diagram constant to the advisory dialog input of the open/create/replace node in each of the two mentioned VIs. Giive them a different icon (e.g. change the background color) and save them under a new name elsewhere. Save them in user.lib and they'll even show up in the user palette.
LabVIEW Champion . Do more with less code and in less time .

Custom Field using screen exits CS01/CS02/CS03

Dear Experts,
I am using Screen exits to add some text description in CS01/CS02/CS03, my requirement is to add a field 'Product Appearance' with multiple lines for the material description. For this I have created customer field 'ZTEXT1' and appended it to STKO table. Now in screen painter(SE51) i need to add 3-4 lines of type stko-ztext1 because the product desc is of size 300-400 character.
I am not able to create 3-4 lines of type stko-ztext1. Can u plz suggest how can i add 3-4 lines of type stko-ztext1 in SE51.
I am able to create a blank field in SE51 using Edit->Grouping->Step Loop->Define, but while activating it is giving error as "Input/Outpt field STKO-ZTEXT1 and key word are not in the same screen".
Plz suggest.
Regards

Hi Kurtt,
Below are the available user exits :-
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
PCSD0014 Knowledge-based order BOM: Status
Check which one suits your requirement.
Regards
Abhii

Validate and Save data of the current page when tab changing

Hi,
Using APEX version 2.2
We have a multi tab chain form, which each page / tab references a different table. Seperately, when each form is saved, the data is validated and committed to the database.
The business requirement is to be able to enter data on a form, and then click on another tab, and the page is "validated" and saved, and then the tabbed page is then shown.
From what I have seen on the forums, pressing a tab, will not validate and process the original form, only perform the page rendering processes.
I have read the forum thread Re: Navigating to non-current pages for a tab - but have not seen how this works? Is there some dialog missing?
What we would like to do is call the tab as per usual;
javascipt:dosubmit('T_PAGE_6');
But also add the save validation first;
javascipt:dosubmit('SAVE'); javascipt:dosubmit('T_PAGE_6');
This would allow the full form validation
Is this part configurable? otherwise is there anothe solution we can use?
Thanks
Jon

Jon, You essentially want your standard tabs to do nothing but act as buttons. If you can adjust the templates to make those "buttons" look like tabs, you'll have what you need.
Others will have to advise on how to do that, though.
Scott

Data in the structure clearing when chicking custom tab in screen exit

Similar Messages

Maybe you are looking for