Custom Field is not updating using MM17 ( Mass Material Maintenance )

Dear All,
      I have created 1 custom field in MRP1 view of MM01 tranction & that field saved into MARC table. It is working fine & I am able to change also that field using tranction code MM02. But Problem is that I want to change that custom field of material master using tranction code MM17 , which is for mass Material Maintenance. So to edit custom field of material master from MM17 what I need to do?  Please suggest...
Regards
Pradip Pawar

Hi,
Follow the below procedure,
1. In table MARC  custom fields need to be add using append structure. For that need to create data elements & domain for      corrosponding fields.
2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.     
3.Now in to the layout of  Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select  screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
Imp Note - Refer SAP Note no. 44410.
Regards,
Pradip Pawar

Similar Messages

  • Custom fields values not saved in AUFK using bapi_alm_order_maintain

    Hi ,
        We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain.
    We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswell in aufk table. We are passing values in below table of bapi.
    EXTENSION_IN
                STRUCTURE           =  CI_AUFK
                VALUEPART1        =  '20091223' .
    Please provide the solution.

    Hi Phani,
    May be these links are helpful:
    BAPI extention to work order aiming AUFK custom field filling
    Update custom fields in MARA (BAPI_MATERIAL_SAVEDATA)
    Also search sdn using the BAPI function module, you may get some idea.
    Regards,
    Swarna Munukoti

  • Custom field in 'Notes and Attachment" tab of shopping cart

    Hi All,
    I am working in SRM 7.0 classic scenario and i have requirement in which i need to add custom field in 'Notes and Attachment" tab of the shopping cart portal.
    I have added those fields in structure --- INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
    Also implemented the BBP_DOC_CHANGE_BADI in while i am populating the custom field value.
    I have created custom field as INPUT FIELD in webdynpro component /SAPSRM/WDC_DODC_NA and view : V_DODC_MAIN_VIEW.
    Now I can see the custom field value in table BBP_PDISC, but i am not getting the value in Shopping cart "Notes and Attachments" tab.( I am able to see the field but not the value of it).
    The value is getting populated in ITEM DATA tab instead.
    Please suggest if i am missing anything in the process and how to achieve this.
    Thank you in advance.
    Thanks,
    Satheesh

    Hi,
    You have done everything.. well.. except that you did not set the attribute of the input field to this value.
    When you have value u just need to bind it using set_attribute method of the element.
    Use  ctr+f7 to generate the wizard .. select in set mode.. click on context and select the attribute that you have created in the context.
    Hope this helps.
    Regards,
    Vinay

  • Customer fields do not display in cProj 4.5

    Hello,
    I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity
    I am using following steps to do this:
    1. Enhance database tables for customer fields
    2. Create field groups for customer fields
    3. Assign customer fields for fields groups
    4. Define fields groups per project type
    5. Save and open cProjects
    But when I start the application only the main tab and sub tabs can be seen. Other customer fields are not seen.
    Does someone has an idea what is going wrong with it and where I can start searching the problem?
    Thx, Vanessa

    Hello Vanessa,
    there is one more step that needs to be done in the customizing:
    You have to set up a field control for your customer fields (IMG activity 'Set Up Field Control'). Here you define the conditions when these fields are displayed, hidden etc...
    If you have no field control, these fields will be always hidden.
    Please do not change the standard field control 0SAP but rather copy it to your own and adapt it according to your needs. Please refer also to the available IMG documentation.
    Afterwards, this field control needs to be assigned to your project type (IMG 'Define Project Types').
    Regards,
    Silvia

  • Nokia E52 Message Sender Name Field is not updated...

    Nokia E52 Message Sender Name/Field is not updated automatically on Firmware 054.003!
    Issue 1: Message Sender Name/Field is not updated automatically after changes made in contacts.
    e.g. Message send by Mr. A is displayed in inbox, however when same contact changed to Mrs. AB in contacts does not update sender name/field inside inbox. Sender name remains Mr. A physically on handset. However the changes made to contacts and Message Sender Name/Field is updated automatically on use of Nokia PC Suite 7.1.60.0 and Nokia Ovi Suite 3.0.0.290 but not on phone. 

    Thanks for sharing the answer here, it is really helpful for others with the similar issue.
    Qiao Wei
    TechNet Community Support

  • Iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgraded application.

    iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgrader application.  Repeatedly says it can't locate photos even when told to cancel.  I think the photos in question are in Nikon RAW format.

    iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
    iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
    You need to do the following:
    1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application. 
    2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
    3 - launch iPhoto 9.5 to open and finish the conversion of the library.
    OT

  • Updating the CUstomer fields in mARC table using BAPI_MATERIAL_SAVEREPLICA

    Hi friends,
    I want to update the Zfields in MARC table .Please provide me the details for updating these fields (Extension in bapi) Using the  BAPI_MATERIAL_SAVEREPLICA
    Thanks in advance

    Hi Varsha,
    There is documentation provided for this funtion module:
    If long texts (for example, basic data texts, internal notes, purchasing info texts, material notes or sales and distribution texts) or customer-specific fields have to be created for a material, some specific characteristics have to be taken into consideration. These characteristics are detailed in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
    Documentation is present for the parameters by clicking on EXTENSIONIN, EXTENSIONINX
    Regards,
    Swarna Munukoti

  • Updating Custom field in Table BUT000 using BAPI 'BAPI_ISUPARTNER_CHANGE'.

    Hi,
    I have added a new custom field in table BUT000. Now i want to update that field with 'X' and i have used EXTENSIONIN parameter in the BAPI 'BAPI_ISUPARTNER_CHANGE'. i have populated the field name(Custom field name) and value 'X' to that structure and passed to BAPI. But that field value was not getting updated. So can any one help me how to resolve this issue.
    Thanks,
    Sushma

    Hi Ravi,
    Thanks for your response.
    I have passed the Structure name  in parameter EXTENSIONIN, but still i am facing the same problem.
    Thanks,
    Sushma

  • ESS Leave Custom fields, how to update them using BADIs

    Hi There,
    We are trying to use custom fields provided in ESS leave application, and we want to update them using BADI. As these information is not available on the screen while requesting leave request.
    I did look at PT_ABS_REQ BADI and seems i can use Post_Vio_BLOP .. but its unable to update table PTREQ_ATTABSDATA .
    Can you please suggest what can be best approach here.
    Thanks a lot.
    Rgds,

    Sudhir wrote:>
    > I did look at PT_ABS_REQ BADI and seems i can use Post_Vio_BLOP .. but its unable to update table PTREQ_ATTABSDATA .
    Did you look at using the Implict Enhancement Options available at the beginning & end of the POST_VIA_BLOP Method? Or even better, enhance the Class CL_PT_ARQ_REQ_EXIT & replace the IF_EX_PT_ABS_REQ~POST_VIA_BLOP Method with an Overwrite Exit?
    ~Suresh

  • Updation of Custom Fields in AFRU table Using Customerexit

    Hi all,
    I added two fields in CO11n Tcode using SCREEN EXIT - CONFPP07 and iam trying to update these two fields in AFRU table
    using CONFPP05.  But iam unable to update these two field .
    see this code in CONFPP05
      LOOP AT afrud_tab.
        afrud_tab-zzshift = wa_afrud-zzshift1 .
        afrud_tab-zzoperator = wa_afrud-zzoperator1 .
        MODIFY afrud_tab.
      ENDLOOP.
    Plz help me regarding this..

    Thanks for reply
    Ya i added two fields in confpp07 .
    see the code :
    *&  Include           ZXCOFTOP
    tables : afrud.
    DATA : WA_AFRUD TYPE AFRUD,
            IT_AFRUD TYPE TABLE OF AFRUD.
    Include           ZXCOFU24
    MOVE afrud-zzshift1 TO wa_afrud-zzshift1.
    MOVE afrud-zzoperator1 TO wa_afrud-zzoperator1.
    Even though it is not updating . except these two fields.
    Regards,
    Srinivas

  • How to update a custom field of MARC table using BAPI_MATERIAL_SAVEREPLICA

    Hi,
    I want to update a custom field (Appended field) of MARC table using  BAPI_MATERIAL_SAVEREPLICA. Please help me in this issue. I cannot use BAPI_MATERIAL_SAVEDATA as this updated the MARC table record by record. I have to update bulk records at a time.
    Thanks
    Rahul.

    Hi,
    Use the Documentation given for struture in BAPI docuemntation...
    For loading data into custom fields of MARC use the structure - BAPI_TE_MARC.
    First, structures BAPI_TE_<NAME> (<NAME> = MARA, MARC, MARD, MBEW, MLGN, MLGT, MVKE, MARM, MAKT) and the appropriate check structures BAPI_TE_<NAME> (<NAME> = MARAX, for example) have to be extended by the customer to include the required fields. The structures that are delivered as standard only contain the relevant key fields. When new fields are added to this structure, you should ensure that a field has the same name as the field in the database table. Furthermore, the fields in the structures BAPI_TE_<NAME> can only be CHARACTER fields. Data element BAPIUPDATE is to be used for the fields in the check structure (exception to this: key fields.)
    Parameters EXTENSIONIN and EXTENSIONINX are used for transferring data to the method. Field STRUCTURE contains the name of the structure (for example, BAPI_TE_MARA or BAPI_TE_MARAX). This names is used to identify the work area (for example,  WA_BAPI_TE_MARA or WA_BAPI_TE_MARAX) to which the data is transferred. The remaining fields in parameters EXTENSIONIN or EXTENSIONINX contain data for the key fields (for example, the material number) and the data for customer-specific fields. The number of characters reserved in both parameters for the contents of the customer-specific fields must match the number of characters for the relevant field in the work area. If the number of required characters is less, the remaining characters are left blank. Only when all characters have been filled can the contact for an additional field be transferred. Bear in mind that only data for which an appropriate indicator has been set in the work area can be updated to the database.
    Regards,
    Bhargava

  • Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"

    Hi All,
    There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the custom field thru EXTENSIONIN.
    Thanks in advance.
    cheers,
    Vijay

    see the help
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
    Regards
    Kiran Sure

  • Issue in Alternative unit of measure (MARM) update using MM17

    Hi,
    I have tried to update alternative unit of measure (MARM) for some materials using MM17.
    It is working for some unit of measures (Like FT).
    But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
    But according to MM17 functionality I think PLB values should change.
    Please check and let me, if you have any solution or any one faced the same issue.
    Thanks
    sham.

    Hi Sham,
    Your problem could be caused by wrongly assigned ISO codes to the  unit of measures involved. Most probably to these unit of measures   the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
    There only the ISO-code is given  and then the System doesn't know the correct unit of measure, which     
    should be used. So it is possible, that the change is done for a  wrong unit of measure.
    Please check for this your customizing in transaction CUNI.                                                       
    Regards
    Mauro

  • MVKE table updation through MM17 mass maintainence.

    Hi Experts,
    I need some input regarding mass maintenance of material.
    The input field 'Product Hierarchy' is present in 'Basic data' (MARA-PRADHA) and in 'Sales View' (MVKE-PRODH).
    As per standard SAP if I do changes through MM02 in Basic data, the field automatically updates in Sales View.
    But if I propose changes in the field MARA-PRAHDA (i.e.product hierarchy) through MM17, it is only updating MARA-PRADHA and not in MVKE-PRODH.
    Every user does not have the authorisation to use MM02, hence we are using MM17.
    Is there any another method to update both the fields other than MM02.
    Kindly suggest.
    Warm Regards
    Tushar

    Friend
    MARA and MVKE are two differnt feilds.
    When you are using MM17 and maintaining values for feild in table  MARA - PRADHA means you are limiting (Mass maintianing )to that table and feild only. Hence you will have to select MVKE - PRADHA as well while maintaing through MM17
    Where as MM02 or MM01 with SAP Standard setting has a warning message to check Prod.hieracrchy in Sales view while maintining first in Basic view.
    Reward if useful
    Regards
    SE

  • OOTB Approval Workflow on Custom List does not Update Approval Status

    I have a custom list on which I've required content approval.  I then created a workflow instance from the "Approval - SharePoint 2010" template.  For this workflow I have selected "Update the approval status after the workflow
    is completed (use this workflow to control content approval".  When I approve the list item via the workflow task item the status of the item is not updated but stays at pending even though the
    workflow shows "Completed" with the Outcome of "approved".  Is this the expected behavior, i.e. does "Update the approval status after the workflow is completed (use this workflow to control content approval"
    not work for custom lists?  Does it work on any of the lists?

    Hi Kalos1840,
    If you check "Require Content Approval" setting, only the way above can update the approval status due to the approval status is for this approval workflow. As this approval workflow cannot achieve your demand, I recommend you un-check "Require Content Approval"
    setting and create a custom workflow such as the OOTB Approval Workflow or SharePoint Designer workflow.
    Here is the steps of a SharePoint Designer workflow:
    1.Go to your custom list , click Create a Workflow in SharePoint Designer.
    2.Add a “Start a task process” action in your workflow.
    3.Click “these users” and Start a Task Process edit page will pop up.
    4.In the Participants field, input your  approvers based on the order of approval.
    5.In the right of Participants field, select “Serial (one at a time)”.
    Best  Regards,
    Eric
    Eric Tao
    TechNet Community Support

Maybe you are looking for